Development of VoipCall has been stopped.
VoipCall 0.2.1
In the VoipSMS thread people started asking for a similar program for calling. So here it is
It's a first trial. If you've got some suggestions; let me know.
Requirements
You need the .NET Compact Framework 2.0 to run VoipCall.
Instructions
In order to use VoipCall, it's important to configure it first.
Go to options and set the following values on the first tab (Application Settings)
Pause sign: p (lowercase, this is default, however unlikely your phone might have a different sign)
Default country code: this is a digit code which will be used when no country code is set.. For The Netherlands it's 0031. For Germany 0049 etc.
Use '#' Sign: set to true.This will add an '#' sign to the end of the number to call. This is needed by VoipBuster.
Accounts (second tab)
Add a new account by tap and hold on the list of accounts. Enter a friendly name and the number.
The number can be retrieved over here: https://myaccount.voipbuster.com/clx/accessnumbers.php?form=profile
(Login first and then go to : 'Make VOIP calls from your fixed/mobile phone)
Select your country and a city. The number displayed must be filled in on the VoipCall settings)
Done.
Now you can use VoipCall ;-)
Just select a contact or type a number in the textbox at the top. and press the call button.
Have fun!
Versions
There are two versions available;
- For PDA/PocketPC
- For SmartPhones
The SmartPhone version has some limitations. It does not support favorites and currently only 1 account. Hopefully I can change this soon.
PDA
Changelog
Version 0.2.1 (31-05-2008)
- Parenthesis in numbers will be removed in order to make calls.
Version 0.2 (22-05-2008)
- Move favorite down/up in contextmenu on favorites
- Delete all favorites
- Order favorites fixed
- Phonepad will be visible during call
First attempt...
Hi Mathieu,
Thanks for the app! I tried it but I have few comments:
1. After configuring the app and using a country code where I'm at right now (France) it looks like the app tried to call to my own number...?
2. I saw that VoIPbuster actually has a Java app where you enter your own number and the other party's number and when you click "call" it dials back to you and then connects you to the other party. Can your app use the same method?
The reason I'm asking for (2) is because at least for me, I travel allot and I would like to redirect my call to either a local landline or other mobile phone which is different from the one I registered; doing so will be very useful...
I noticed that the app (also the XP app) using UDP to communicate with VoipBuster so I'm not sure if this is an open interface that they publish or not but it will be very useful!
Again, Thanks allot for the efforts!! Let me know if I did anything wrong and why the app initiated a dial to my own number after selecting someone from my contacts to call to...
Gil.
Hey,
Some quick answers.
1. Did you enter the correct number for the account? It must not be your number, but the service number from VoipBuster.
For France it's: 0170909535
2. I've to take a look at that app. I'm aware of its existance. Unfortunately VoipBuster is not giving away a lot of information. But I'll take a look at it.
Another option is to configure multiple accounts. You can switch accounts at the bottom of the main screen.
Ok, now it's clear
So I will have to enter the local access #. I will try that tomorrow morning...
Let me know if you have more information about phone-to-phone using two numbers (my own number and the number I want to call to) it has lots of benefits when one is abroad and using a pre-paid SIM card... if VoIPbuster will call me instead of me calling out - I will not be charged locally for the incoming call. I will only have to pay VoIPbuster charges which is much cheaper...
Thanks!
Gil.
hi Rhapsody, that was quick! didnt expect it so fast.. great idea and it looks like another very nice app...
ive been having some trouble with my voip calling from the internal wm6 possibility, so i cant wait to try this one
The VoipBuster rates for calling to your mobile number and the number you wish to call apply (plus a callsetup fee of 5ct). Costs for the calls will be settled via your VoipBuster account, so make sure you have enough credit.
Example: You are in the USA and wish to call a landline in the UK. You pay a callsetup of 5ct plus a rate of 18Ct/Min + 1Ct/Min = 19Ct/Min
Click to expand...
Click to collapse
It seems like you also pay for VoipBuster calling you.
I've uploaded a SmartPhone version.
Unfortunately I was unable to add favorites functionality as well as multiple accounts. Hopefully I can add this soon.
Rhapsody is the best
Rhapsody,
I've sent you an email with some additional information I've found for better automation of betamax services.
Take a look, let me know if some of these functions can be part of your client, it will be REALLY COOL if it can be implemented and make your program even more complete
Gil.
Thanks!
In the meantime I was also searching for some more information but without success...
I'm gonna check my mail now
Does it work only with Voipbuster? I only have account with Voipstunt..
It should work with every VoipBuster clone.
what about?
what about freecall.com? can I use this with account in freecall.com? imho freecall much better than voipbuster. they offer more countries to call for free, and free sms as well.
DaMilky said:
what about freecall.com? can I use this with account in freecall.com? imho freecall much better than voipbuster. they offer more countries to call for free, and free sms as well.
Click to expand...
Click to collapse
FreeCall.com seems to be another Betamax client, so the answer is yes; you can use this app for it.
In fact; the required settings are identical to VoipBuster. (http://www.freecall.com/en/geo.html)
VoipCall installation
Hi Rhapsody,
I use "VoipSMS". It's great, thank you for it.
I' ve tried to install "VoipCall", as well. Unfortunately, I can't select any provider nor can I define a new one because the "Account" tab is unaccessible, it is grey. Is it normal? My gadget is an Asus m530w smartphone with WM6 Standard OS.
I use "fring" with "Poivy" settings. It works fine. I' d like to use "VoipCall" with "Voxalot". Could you advise me the required parameters for selecting Voxalot, please?
Best regards,
tipmix
I am using Gizmo for my voip. can i configure it on voipcall 0.1
thanks
rsourour said:
I am using Gizmo for my voip. can i configure it on voipcall 0.1
thanks
Click to expand...
Click to collapse
I cannot find anything about Gizmo on this issue on their website.
The only thing you need (for now) is a service number to call. This service number is a computer where you can enter the number you want to dial through the voip provider.
Gizmo is not a Betamax client so I think it's not possible.
Further I'm waiting and hoping for some help from VoipBuster itself. I've dropped a question at my contact at VoipBuster about if it would be possible to implement calling like on their website (that the service calls you and the recipient).
tipmix said:
Hi Rhapsody,
I use "VoipSMS". It's great, thank you for it.
I' ve tried to install "VoipCall", as well. Unfortunately, I can't select any provider nor can I define a new one because the "Account" tab is unaccessible, it is grey. Is it normal? My gadget is an Asus m530w smartphone with WM6 Standard OS.
I use "fring" with "Poivy" settings. It works fine. I' d like to use "VoipCall" with "Voxalot". Could you advise me the required parameters for selecting Voxalot, please?
Best regards,
tipmix
Click to expand...
Click to collapse
I don't know Voxalot. (Seems like there are thousands of Voip Providers)
The only thing you need to get it to work is a service number.
I'm not sure but you could try a number from this list: http://www.sipbroker.com/sipbroker/action/pstnNumbers
I'll try to look at the account issue asap. Thanks for reporting.
I am confused by the overall VOIP concept??
Is it truly free, or do I still have to have Skype or a similar account?
What other software must be loaded for your progiie to work?
Thanks so much!
pardon my ignorance, but I am not sure what this program is for. If you are calling a service number or if the service is calling your phone, aren't you charged airtime on your phone anyways? Or is this really a way to get international calls cheap or free using standard local airtime?
Hi @ all,
I have a question or request. First let me explaine the situation.
I use justVoip.com for calling German Cells cheaper and the USA for free. I call justVoips Landline for free (because I have a landline-flat) and they forward the call to the desired number. I used to just save their number before the contacts number seperatet by a "P" (pause): 08912345P0172123456
When receiving calls my Motorola would still recognize the Call-id, also with the voip number in front of it. But my X1 now doesnt recognize calls with their number inserted...
So my question is... either is there a way to have two seperate phone books running parallel or is there maybe a software that always asks if the preselection should be added when making a call??
Or a nother solution I didnt think of yet..
Hope this wasn't to complicated and you kinda now what i mean...
thanks..
Danny
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
livegod said:
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
Click to expand...
Click to collapse
Don't know if it will work... but you coud try (using Advanced Config) to increase the number of digits used to "match" the numbers in the contacts... for example to 18 or 19 numbers... but I cannot immagine what other "consequencies"could happen...
Let us know !
Regards,
K
Hi Kostas
It seems that the problem is actually with spb Mobile Shell and not windows mobile.
When I dial using the windows mobile dialler, it gets the name and picture right, but when I use spb's dialler it shows the wrong person and name...
I will chase it up with them... and thanks for the good idea, unfortunately the Call ID Match does not help the problem.
Efgaristo!
Mark.
Hey guys,
I'm on (nearly) latest nightly build. I want to use the SIP client built in the dialer to make VOIP calls. This works totally fine but I want to call just a few numers/contacts via internet call and the others over regular cell network. When I select the option "Use internet calls... only for internet calls" (or sth similar) I never found an option how to do that call no matter if I dial the number directly or if I want to call a contact. The other option would be to choose between regular and internet call before I make the call but that started to get annoying
Does anybody have a clue? Help is much appreciated, thanks in advance
Best, Bootsy
Alright, I found a solution in case anybody is interested:
In order to call a specific number always via SIP you have to add a GOOGLE-contact (Exchange contact does not work since it does not have the appropriate field) and simply add the field "internet call" where you put the phone number. If your dialer is set to use SIP only for internet calls all outgoing calls use cellular network except of the numbers which are stored as "internet calls".
i have started using my S4 at work
im a cable technician, when i call customers im blocking my number using #31# before the actual number of the client for obvious reasons- its a big company, anything has to go through their customer service center
the thing is, when i call a client using that prefix, its gone in the call log, so when i need to call him again( which often happen) i need to dial the number again which is very uncomfortable as im calling dozens of customers everyday, my older work phone was a simple J105 sony ericsson , which used to saved the number in the call log just as it was, smartphones for some reason, dont...
is this a setting i can change or some other dialer i should use ?
please? anyone?
Maybe try other dialer and contact apps...