Heyooo
I'm new to my 8125, and am having the damndest time trying to connect to my wifi.
I have a proper WPA-PSK wifi network, and I've entered the network key several times now. Each time I try to connect though it fails and just reads the network as "available". When I look at the network key area theres far more stars than what I've actually entered for a key.
Is it buggering off and putting in the network key wrong itself, or is there something further I have to do to get it properly connected? I've connected to an open network no problem (al bet before I did a factory reset).
Any help would be appreciated =D Thanks!
-6th
Hey mods!
You can delete this thread. I figured out what it was (various router settings) that was preventing me and got it sorted.
Related
Hi,
My mini s seems to have a problem connecting to my home network. When i switch the wi fi on it searches but does not connect. I hard reset a coyuplke of day ago and switch on the wifi and it found my network then promted to enter key, which i did. The phone then connected no problem. No when i switch wifi on it doesnt connect. I go into network cards tab and look what networks are available and my network is there with available next to it but the options have all change (key be given out auto etc...) so i change them to the correct ones etc.. but still it doesnt connect? What i'm i doing wrong? I has worked in the past but not now. I have not installed and 3rd party software and my router is working fine (laptop downstairs works no problem off network).
any ideas
cheers
hi,
i just reseted my router and renamed my homenetwork and assigned a newwep key. started wifi on mini s and it connected straight away to the my newly named network. switch wifi off then on again and now it wont connect. it see's the network and says its available but wont connect. under the settings the network key has changed. it's defo a problem with the phone cus everything else works fine (laptop, psp). it's just not saving the network info???
and ideas???
cheers
think it could be because i've upgraded to o2 new rom??? Could somebody with the latest UK o2 rom please confirm that ther can connect to the networ?
cheers
This also happens to me with the latest O2 ROM.
What you have to do is to manually connect and perservere by going to Network Cards, tapping the network and then select Connect. It may take a few go's but it will connect eventually.
Report back how you get on.
You may want to set up your router to assign a fixed IP address to the Mini S's MAC address as well.
Sounds like the problem I've been having. I've also got an O2 rom and am having problems connecting to any wifi network, even though it worked fine the first time.
I've tried going to the network cards page and clicking connect, but it hasn't worked so far. talkingbollox - when you say 'eventually', how long are you talking?
I'll also try assigning a fixed ip address later, but my hopes aren't high.
when you say 'eventually', how long are you talking?
Click to expand...
Click to collapse
Sometimes 2 attempts, sometimes up to 20.
Persevere!
20! I probably tried about 10 times before I gave up. Surely this is a fault. You shouldn't have to waste so much time just to get a connection! :x
I tried MAC address filtering too but that didn't seem to work.
Do you think this is a O2 ROM problem or a hardware problem? If it's just O2, I think I might try a different ROM. Any suggestions which ROM to use?
My Mini S came already with the latest rom I think, and it works fine with my router (BT Voyager 2110)
Are you guys using the 802.11g reg edit?? Maybe thats why its not working, I actually did the hack before I ever turned on my wifi so I don't know if it worked without it. Try it My wizard connects with my router in G only 8)
Search the forum you will find loads of posts about it, and I think somebody has even made a cab file that does it for you, along with some speed tweeks that make your system faster.
It must have taken me in excess of 40 goes to connect last night.
Yes, I am using the g mode hack. My Voyager 2100 is set to broadcast in both b and g (i.e. mixed) mode.
I had the same problem... what I did was just entering the dns adress of my router.
So the ppc doesn't wait for the dhcp server to asign it .. it works great when surfing at home !!!
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
I had a problem with my Wifi working when I first got the phone. But since I wanted to SuperCid the phone I had to downgrade the IPL to do so. I re flashed to the same Cingular 1.34 with IPL 1.06. Since then I have not had any problems with the Wifi.
stsanford said:
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
Click to expand...
Click to collapse
Here's a thought. Why not try the Hitchhiker application. It tends to get round quite a few issues in set up. Also once you've got it working and connected to Wifi you can close it down if you wan to and you'll find it has saved correct settings for your normal way of connecting to wifi. Another benefit is that you can cut the wep key from a text document and paste it into the box it gives you (saves a lot of hassle whenever you need to re-enter the key - which in my case is 28 letters digits long!!) WM5 box as you may have discovered does not allow wep pasting!!
You need to have .netframework installed as well byt the link I give you also has a link for that as well:
http://www.kasuei.com/hitchhiker/
Mike
i recently got att 8525 but i havent able to connect wifi with my home network. it asks for wep key, then shows connecting to network and after a while shows wrong network key...no success so far...i even tried the abive hitchhiker sf and all but no luck...has anyone come up with any solution??? i had np connecting 8125 b4...!!!
btw i use wm5 and the most recent att rom update posted on htc site...
hoping for some solution...
I have similar problem too with my cingular 8525. I unlock it to work with t-mobile and also upgrade to wm6 . Now, I can not connect to my home wlan. If I click on wlan, it show my wireless network. But if I click on internet explorer, it show me the default internet window explorer with at & t and window mobile icons. when I click on either one, it take me to media net log in screen. help me
ok, i dont know how but my wifi started working last night!!! b4 it always looked for IP address and eventually disconnects b4 connecting to home network. so i installed "hitchhiker" but no luck either...so i uninstalled and then tried but this time it said connected to network and as soon as i open IE, it disconnects...it looked like wifi connects but then disconnects or timeout due to power settings, so i changed power settings under wifi settings to best performance and now it just connects right away...
--
ellisos020 said:
Just wanted to let everyone know that switching from "best battery" to "best performance" also solved the "incorrect network key" error for me. Thanks Chakli!
Click to expand...
Click to collapse
Thank You Thank you Thank You. I've been at this for a few days now. It would have to be that simple.
Just remember you need to run the remove proxy cab file if proxy is has been set to use GPRS/WAP. Also make sure the right network interface is selected - like work uses 802.11 etc..
Hi there,
My WIFI connection worked fine with a Belkin router I had. After upgrading to a 'Netgear Next Wireless ADLS2+ Modem (router)', I cant seem to lock onto the router.
I type in the WEP Key, but then the arrows of the indicator on the top continue moving showing that no connection has been established.
I am not as good as I would like to be with networking, so I need easy step-by-step advise with how I can set up a connection.
Please help.
Many thanks.
Over 60 views, and no reply!
Anyone?
well since it worked before maybe the question should be posted in the Netgear forum
i would at first upgrade the firmware of the router if possible
Hi
I've not long had my Vario 2 and I had the same problem, it just refused to connect. I looked in the active Station List in my routers config page but there was no sign of my vario's MAC. I thought maybe the wifi was busted so I took it to work and connected fine. Back to my router then, eventually it appeared in the station list but was being reported as failing the WPA authentication. I must have put that key in I don't know how many times before it finally let me in. I don't know how it happenned but I just sat there repeatedly entering the key and refreshing router config screen.
I suggest you try connecting to another wifi network to test your device. Try connecting to yours with security off, then switch it back on.
I just had to seemingly bully my router into letting me connect, but after some time (several sessions over a few days) it did.
Hi all,
I am having a strange problem with my HTC P3600 running WM5. For some days now it refuses to connect to my router (WEP encryption) complaining about the network key. Thing is, I have changed absolutely nothing neither to the router nor to the phone. Obviously I am absolutely positive that I am inserting the correct network key. Plus, the phone is able to connect with no problems to other secured networks.
I tried both a soft and a hard reset but the problem persists.
Any ideas/suggestions would be greatly welcome.
Hi,
I presume it's your own network that you are trying to access.
In that case, just logon to the router/wireless access point and simply copy the network key and enter it into your device. Ensure that the key is copied exactly as it is written in the router.
kiwi992.
Thanks for the reply and for offering a really good idea.
However it didn't work
Hi,
Sorry to hear that the solution offered does not work. I'm at a loss!
Assuming that your WiFi configuration on the device is correct, this problem should never take long to solve. The device asks for the correct network key, you simply provide the right key, enter it in the Network Key field and do a re-set. That should be it, but for some reason, it is not accepting your key.
Why not ask the network admin for the key. He should know it.
kiwi992.
I would first try turning the encryption on the router to off to make sure you can get a connection to the router. The other thing you might try is to reset the router.
Hi, I recently bought a 16Gb DVP on WinMo7 and for three weeks had no Wifi problems at all. It recently stopped finding my home WiFi router.It finds both neigbours routers but mine is missing from the list.
I then got an update notification for the Mango update which I competed. the router didn't return in my list of networks immediately but about two days after.
It has now dissapeared again but 'Mango' has the added 'Advanced' button to see 'known neworks'. My home router is in this lst but I cant access the settings or force any paring.
I've tried the obvious of turning it off and on. I've reset my router, reset my phone back to a clean boot of windos 7.5 (mango) and still no results for finding my router. All the other phones in the house and all laptops find it fine so I can only presume it is the DVP.
Details:
OS version - 7.10.7720.68
Firmware Version - 2250.1800.7720.219
Don't know if this helps.
Does anyone hav any idea why and what I can do to resolve it.
thanks
Jock
Try changing the SSID (name of your wireless network) to something else and see if your DVP can see it and make sure the SSID is not hidden.
Thanks, tried that last night. No luck I'm afraid.
On the router admin now and It's all as it should be fom my service provider settings.
I have a full signal of my neighbours router and just don't understand why it's chosen mine to not even find. When it appeared last time it was after turning the router off all night. I tried that again last night but it didn't appear this morning when I turned it back on.
Confused !!!
Jock
have you been able to connect to and maintain future connections to other wireless networks? if the same problems happens with other networks, I'd run a factory restore on your phone as it seems there might be a software issue. However if you can connect and then are able to re-establish a Wifi connection to other networks then I'm stumped!
I've just changed the SSID to something completely different and it's appeared and I'm now connected again.
All I can say is that it connects to the router for around a week and then the network dissapears.
Short of changing the name every 7-10 days I can't really see another resolve.
In answer to your other question, I haven't really used it on other networks.
I'll see how it goes with this new name.
Thanks for all your help and suggestions
Jock
After reading other posts, this might be an issue with the .219 firmware that you are on. Just keep checking for updates. You could try a hard reset of the phone and then a reboot of the router
Also make sure your router is set to either B or G mode. Check my post here: http://forum.xda-developers.com/showthread.php?t=1324949
Thanks, I did a hard reset when it first went off, still found nothing when it re-booted. I'll keep an eye out for the firmware update.
Thanks again.
My phone just started doing this as well. Very frustrating as I cant download large updates and I dont want to exceed my data cap. I am totally fed up with this phone!
Fixed. Called Dell. Long press network name. Press delete. Press network name when it shows again. Reenter password. Works!