Database Users

Help! No sound trough speaker

Well, that's weird. My friends new XDA 2 is acting up. He lost his soubd trough speaker couple of days ago, and then it came back. Today it happened again. I have no clue what's going on, hard reset didn't help. Any suggestions?
TIA

Has he been using hands free headset? If its anything like the xda 1 the connecter is very problematic and prone to problems.

Yes, very frequently. Looks like that's it. He connected and disconnected couple of times again and now it works.

Hello everyone...
Well, I'm another victim but in this case my MDA2 is muted but not deaf...
I'll explain... Most people with this problem have said that they can't hear nor can be heard when they have this headphones plug problem (i.e. The plug when inserted got the contacts stuck so the system thinks the plug is still inserted).
But in my case the other party DO hear me (this is without using a headphones) but I can't hear them or the system sounds, music, etc. but when I plug my headphones I can hear all sounds with no problem.
The day it failed it was all of a sudden, no water, no bumps, no nothing... actually I was not even using my headphones, so the jack it's out of the equation...
Any ideas?
Well as a matter of fact, about three weeks ago I dropped my MDA2 to the pavement and it scratched the case a bit, but it was working fine for the last three weeks...
Do you think this may be a retarded symptom of the accident three weeks ago?
I'm starting to think the speaker failed or got unsoldered...
Any ideas?
Thanks!!!
Rayan

hi Rayan
i had the following problem: i couldn't TURN UP the volume.
i could move the volume slider, but when i took another look to see if the device did really set the slider to the volume i had set - nada - zero.
volume was down again.
if you encounter the same problems: make it short and give your device a COLD reboot. that was the only thing that did help and gave me back audio.
regards ize|man

Hi izeman,
Well, I even performed a hard reset to factory defaults and nothing!!!
And because of that I'm sure it's a hardware problem...
I just hope it's a simple fixable hardware problem... I'm just wating to get in touch with the guy's at gsmphonesource.com (I have sent SEVERAL emails and voicemails and no one has contacted me back!) :evil: (nice customer service huh? :? )
Well I'll let you know how this story ends... :roll:
Thanks,
Rayan

WHOOOHOOO!
I fixed the problem!!!
Since the guys where I purchased my MDA2 NEVER returned my calls and emails, I got desperate and fix it myself!!! (I know I void my warranty, but it was useless anyway since those *&^%$ guys refused to take my calls)... :evil:
Anyhow, I carefully opened my MDA2 and got all the way into the speaker (which is actually encased in a module with two small gold plated connectors on the top) and cleaned them both, on the speaker module and the motherboard where two matching springs are located. I even carefully pulled the springs to give them a little more "pressure" when assembled.
Well, what can I say... I'm very happy to have my sound back!!!
If someone want to go this route, please let me tell you that it was a pain in the buttocks just to pry open the casing, but now I know how to do it, so drop me a line if you need any assistance... Maybe I will document the procedure with pictures once I have some spare time!... :wink:
(Now I can get rid of my stupid wired headset... It's amazing how those damn wires get to tangle so much!)
Best regards!
Rayan

Sound problems
Hi Rayan,
Good to know you fixed it - I have exactly the same problem; speaker only works intermittently. :evil:
I'd like to take to up on your offer to provide further details; especially how your opened the case without damaging it. :?:
cheers,
Pete
XDA II, Scandisk 512Mb, Plantronics 3000[/quote]

Rayan's fix...
http://forum.xda-developers.com/viewtopic.php?t=8525&highlight=sound+problem

Front camera and earpiece not working

Hi all... This is my first post and and just want to say what a great community... Thanks...
Now for my problem. I have spent a lot of time reading posts and trying to solve my problems and haven't found anything that relates to what I am experiencing so hopefully someone might be able to help me out. It's a fairly long story but I'll try to give you the quick version.
I bought a new Softbank X01HT from an ebay seller. The phone arrived and when I tried use it all I would get was a bright white screen. I tried emailing the seller and got no response. (They sell several phones every day so I don't think he deliberately ripped me off, I just got a dud and the seller is too lazy to reply to emails).
I opened up the phone and investigated, my brother has an I-Mate branded version of the hermes so we swapped parts around and decided that the LCD/front ribbon cable was causing my problem. I ordered a new cable from cnn.cn. When it arrived I fitted it and thankfully the phone came to life. I did all the usual mods then, updated the ROM etc etc.
When I got it all back together the front earpiece was working but only very very quietly, I could hardly hear the person on the other end. The speakerphone works fine though. I tried hard reseting and even flashing a different ROM but this didn't help. So I opened the phone up again, thinking that I hadn't seated the earpiece properly. This time when I started it up again I got absolutely nothing from the earpiece. I also found that the front camera just doesn't work. I tried my swapping back the original ribbon cable, although I couldn't see what was going on I was still able to get someone to video call me, answer the call and still found the camera wasn't working, doing this I couldn't test the earpiece though.
I put the camera in my brothers hermes and it works just fine. We have swapped all parts around including main boards and they all interchange fine. I only strike a problem when I am using my camera with my main board. As for the earpiece we couldn't succesfully make it work in my brothers phone, but also couldn't make his earpiece work in my phone.
I have read the posts about the contacts on the earpiece, but trying this hasn't solved my problem. I guess there is a chance that the new ribbon cable I got is also faulty, but to have the same problem from two ribbon cables seems fairly unlikely. The speakerphone works fine and so does my bluetooth headset so I am fairly confident that it is not a software issue. I have used Black Satin ROM and now I have installed Schaps 3.6 (both nice ROMs btw)
Thanks to anyone who has spent the time to read this post, hopefully someone may be able to shed some light on it for me. I got the phone a fortnight ago and still haven't been able to use it properly and it's starting to drive me nuts.....
Thanks
Craig

Qtek 9100 - Mic & speaker dead, for the 2nd time

Hello all!
First, thanks for an awesome forum! It has both helped me tweak my Wizard, and also get help when I have needed it.
Well, I have no choice now but to ask here. Last autumn, my warranty was almost up, and a wierd problem presented itself. The mic and speaker suddenly just stopped working! The sidespeakers still work, I think, because the phone rings when someone calls me. But the caller can't hear me, and I can't hear the caller. And there isn't a hint of sound in it, no static or noise, there simply is nothing.
As there were only a few days before the 2 year warranty was up, I ran to my dealer and turned it in. A few weeks later, the phone returned, working again. But now that I come to think about it, I don't remember if I got a replacement or if they actually repaired it... It looked a little like they handled it rough though, maybe it was another phone... Well, that's not important right now.
The same thing has happened again! Summary:
1. Mic & phonespeaker dead
2. Stereo speakers work under certain conditions
3. Wired headset that came with the phone works, both for calling and media
So it seems like a hardware problem. Please note, although I downgraded the phone to original, official Swedish Qtek 9100 ROM, it has been thoroughly tweaked and upgraded to a number of different WM6 ROMs - but all that has been working beatifully!
Still, what are the odds for the mic&speaker dying twice in a row, on different phones (i think the present one is a replacement)?!?
Question: Does anyone recognize this? Is there a possibility that it is software related, and maybe fixable? I have searched both the web and these forums but haven't really found any information on it.
ANY input would be greatly appreciated!
Additional information:
Qtek 9100 (Swedish), G3 model, WM6 upgrade successful (unlocked)
EDIT: There are no system sounds, which is wierd, because the phone can still ring. I thought the system sounds came from the stereo speakers on the sides of the device?

Hello all!
It is a glorious day to be alive!!! Or to have a fully functional Wizard, at least!
Lol - my topic isn't very old, and i reply to it myself with a solution (?). I Googled after the Wizard service manual, and found it right here on Xda .
In all honesty, i didn't do all that much. I just followed the disassembly instructions of the wizard about half-way through, to the point where you get down to the back of the motherboard. I poked and fiddled enough to locate the mic assembly, only to discover that the mic is soldered to the mainboard of the phone. So, i figured i'd just leave it be, because if the mic is really broken the motherboard needs to be repleaced, or a replacement mic needs to be soldered on there.
After removing A LOT of dust in there (honestly, i think the service center that had my device last time wasn't very careful with anything, even a screw was missing! ), i reassembled it. The flat cable running to the keyboard was also a little skewed, but that may have been me, anyway i corrected it too. Same with the speakers.
Long story short, after successfully reassmbling the phone, i fired it up, called my home phone and voila! I works!
Not much of a fix, as i don't really know what i did exactly, but dust, dirt and some bad connections/soldering may have benn the culprit.
All in all, i'm very pleased with my afternoon here. Thanks for stopping by .

epatnor said:
Hello all!
It is a glorious day to be alive!!! Or to have a fully functional Wizard, at least!
Lol - my topic isn't very old, and i reply to it myself with a solution (?). I Googled after the Wizard service manual, and found it right here on Xda .
In all honesty, i didn't do all that much. I just followed the disassembly instructions of the wizard about half-way through, to the point where you get down to the back of the motherboard. I poked and fiddled enough to locate the mic assembly, only to discover that the mic is soldered to the mainboard of the phone. So, i figured i'd just leave it be, because if the mic is really broken the motherboard needs to be repleaced, or a replacement mic needs to be soldered on there.
After removing A LOT of dust in there (honestly, i think the service center that had my device last time wasn't very careful with anything, even a screw was missing! ), i reassembled it. The flat cable running to the keyboard was also a little skewed, but that may have been me, anyway i corrected it too. Same with the speakers.
Long story short, after successfully reassmbling the phone, i fired it up, called my home phone and voila! I works!
Not much of a fix, as i don't really know what i did exactly, but dust, dirt and some bad connections/soldering may have benn the culprit.
All in all, i'm very pleased with my afternoon here. Thanks for stopping by .
Click to expand...
Click to collapse
hi epatnor,
I think the problem with your phone was a stucked microswitch in the 2,5 mm connector for the headset. I read about it here in the forum. Sometimes the switch stays in the closed position and the phone still thinks the headset is connected. Thats why all the sound is sent to the not connected headset and therefor your phone seems to be not working (unless you connect the headset)...
But removing the dust is for sure not a bad thing...
For the next time: I think there was an easier solution for this problem than disassembling your phone...
regards
huibuh_1

Thanks huibuh_1,
Yes this was probably not the smoothest way of "fixing" it. That said, the stucked microswitch theory would actually fit my problem well - I can see now that the exact problem I was having would arise if such a switch was indeed stuck.
However, I think that the problem would be more intermittent since I actually use that port now and then - especially since it's the only way to talk (besides using a bluetooth headset that is). And since I connect the wired headset now and again the switch is used and moved, I suspect that this would result in the speaker/mic coming online again maybe..? Temporarily at least?
All the same, thanks for replying - this might happen again and with your information I'm better prepared for it!

Speaker doesn't work. PLEASE HELP!

Dear Friends....
Today I found out that my speaker doesn't work!!!! It doesn't ring!!! { just vibration }
also I can talk on the phone...but when I press the speaker button...I can not hear anything,,,, I am sure it is the external speaker.....
I did soft reset ....and hard reset ...didn't work!!!! I didn't do anything with it...
it also has the original rom .....
I tried to dismount it...but after opening the four screws...I didn't know what to do....I couldn't go further...I couldn't find a way to open it..... the worst thing is that the warranty finished just 3 days ago I am very very lucky!
so please help me either fix it or dismount it....
but please please be fast!
Thank you very much in advance

I heard some weak sounds....
I was working with my phone...and I could hear some weak sounds from it.... It was working.....but with very weak sounds.....!!!!
What should I do?!

I would say it is a hardware fault, either the speaker is faulty or probably dry joints somewhere. I remember reading a thread which gives the hardware diagram, but I could not remember where nor did I bookmark it. If you do a search, may be you can find it. As much as I can help. Regards.

Same happened to me!
Luckily for me it was 3 weeks before the warranty ended and I got it fixed.
I did see that you could buy the speaker on ebay - and was wondering about that option if the company didn't help.
Just search ebay for HTC touch 3g speaker
Good Luck

Replaced screen and...

Hello Everyone
I have an Acer S200 and I ended up cracking the digitizer and lost the use of the entire display. Not sure how. It was in my pocket.
I purchased a replacement on ebay and replaced it. The screen works just as new. How ever I seem to have done something to the earpiece and mic.
When making a call, the earpiece is silent and the no one can hear me. However if I turn the speaker phone on I can have a complete 2 way conversation.
I originally thought it was my ROM however I have tried a few and finally placed the official one on, no luck.
I have taken the phone apart and put it back together a couple times, making sure that all peices are tight.
I am at a loss
Any suggestions will be appreciated
Thanks

Solved
I was able to solve this issue. It was prevoiusly posted. I did search however I was entering the wrong perameters. Anyways...
The solution is here...
Was not able to post URL...
You can do a search for "Speaker problem"
Regards

Hi i have to change the digitalizer,is it hard?Do i have to unscrew the back screws?Can you give me a little of instruction?I have a good pratice to disassembly phones,but maybe you can give me some tips

ACsurge said:
Hello Everyone
I have an Acer S200 and I ended up cracking the digitizer and lost the use of the entire display. Not sure how. It was in my pocket.
I purchased a replacement on ebay and replaced it. The screen works just as new. How ever I seem to have done something to the earpiece and mic.
When making a call, the earpiece is silent and the no one can hear me. However if I turn the speaker phone on I can have a complete 2 way conversation.
I originally thought it was my ROM however I have tried a few and finally placed the official one on, no luck.
I have taken the phone apart and put it back together a couple times, making sure that all peices are tight.
I am at a loss
Any suggestions will be appreciated
Thanks
Click to expand...
Click to collapse
i got my s200's screen leaked by itself without no pound by anythingelse.
in hong kong there's a nickname of acer's phone - the king of cracked mon.
the agent had my phone's mon changed twice, and i really worry the coming of the third becasue the agent will charge me.