After many many frustrating days, I have narrowed down a VERY ANNOYING issue with the otherwise BEAUTIFUL S2U2.
If the device is locked for more than 5 minutes, the connection to my bluetooth headset is lost...not just lost, but my phone doesnt even bother to look for it. I have to go through discovery again. Then the process starts all over again...after 5 min...its toast.
I have tried all versions of SU2U all the way up to 1.22. On an HTC PPC6800 (Alltel) running WM 6.0 (6.1 has been delayed by Alltel's cell group)
As soon as I take the SU2U off the phone..it works like a charm.
Any thoughts (or sob stories) would be helpfull
what bluetooth headset are you using?
Hi,
You are going to get a kicking for this. It would have ben best if you had posted in the original thread and/or kept an eye on what the general consensus on posting threads is.
Forum members are trying to reduce the number of new threads posted in order to improve the search facility and to stop clutter.
As for the answer to your question, not a clue. Sorry.
WB
What???
wacky.banana said:
Hi,
You are going to get a kicking for this. It would have ben best if you had posted in the original thread and/or kept an eye on what the general consensus on posting threads is.
Forum members are trying to reduce the number of new threads posted in order to improve the search facility and to stop clutter.
As for the answer to your question, not a clue. Sorry.
WB
Click to expand...
Click to collapse
In the OP's defense, have you seen how big that thread is? It is damn near impossible to get a question answered in there unless a lot of people have the same issues.
Sean D. said:
In the OP's defense, have you seen how big that thread is? It is damn near impossible to get a question answered in there unless a lot of people have the same issues.
Click to expand...
Click to collapse
So ask in the "Questions" thread.........
Is a user supposed to post a new thread for every question because the original is a bit too large?
Either way, all S2U2 does is prevent screen taps and turns the display off, it does not interfere with the bluetooth connections.
prof.deviant said:
After many many frustrating days, I have narrowed down a VERY ANNOYING issue with the otherwise BEAUTIFUL S2U2.
If the device is locked for more than 5 minutes, the connection to my bluetooth headset is lost...not just lost, but my phone doesnt even bother to look for it. I have to go through discovery again. Then the process starts all over again...after 5 min...its toast.
I have tried all versions of SU2U all the way up to 1.22. On an HTC PPC6800 (Alltel) running WM 6.0 (6.1 has been delayed by Alltel's cell group)
As soon as I take the SU2U off the phone..it works like a charm.
Any thoughts (or sob stories) would be helpfull
Click to expand...
Click to collapse
First: What is SU2U?
Second: Do you know which program manages your bluetooth headset and which is using it? Making that difference makes your question easier. Think in terms like what program do i use to connect my bluetooth headset.
Third: Search, search and search. If that is not enough, search more. There are many threads where bluetooth and headseats are discussed. Come back with information from those threads so we do not have to give the same information over and over again. Besides that, doing your own research narrows your problem
I'm not sure if you have tried this...
in the S2U2 settings, in the Advanced: section (bottom part)
set "Dont Suspend Power" to ON.
motorola
Kicken said:
what bluetooth headset are you using?
Click to expand...
Click to collapse
motorola H700 C...I have used 2 different ones...same result...
btw...thank you for assisting...to all the belly achers on here about duplicate threads...TAG IT CORRECTLY S IT SHOWS IN SEARCH and I will gladly research them
Related
hi everyone.
i've search around the forum, but havent found the solution yet.
i'll try to explain my problem clearly now. when i make a call, the other person cannot hear my voice, or it's way to soft to be heard.i can hear the caller clearly though. The signal is okay, so thats not the problem. To figure out whether the problem is due to the hardware(microphone) or the software, i plugged in the headset, and the other party can hear it clearly. so i thought the hardware might be the culprit here.
i did a second test, i try to record my voice using the note application, and my voice was recorded excellently. so, right now i think the real problem has something to do with the software, NOT the hardware.
as i said, i've search the forum, and here some of the solution that i tried but didnt work.
1. HKLM\Software\HTC\AUDIOGAIN(x)\RECEIVE_UPLINK_VOLUME = CC
and HKLM\Software\HTC\AUDIOGAIN(x)\EARPHONE_UPLINK_VOLUME = CC
2. hard reset
3. try various rom
4. hkcu\controlpanel'soundcategories\incall\initvol = 0 or 6 (both didnt work)
5. set the call volume highest (still sound very weak)
FYI, i didnt use bluetooth stack or bluetooth headset. please, does anyone have solution for this. i cannot afford to use my headset all the time.
any help would be much appreciated
so, no one willing to help? hmm..this forum is not as helpful as it was before year ago when i first joined it. thank you anyway
fikrinasir said:
so, no one willing to help? hmm..this forum is not as helpful as it was before year ago when i first joined it. thank you anyway
Click to expand...
Click to collapse
You've GOT to be kidding. No responses in 6 whole hours?!? I can't believe the total lack of help around here. Just like every other forum, you need to wait at least 24 hours before you bump your post.
kegobeer said:
You've GOT to be kidding. No responses in 6 whole hours?!? I can't believe the total lack of help around here. Just like every other forum, you need to wait at least 24 hours before you bump your post.
Click to expand...
Click to collapse
as u can see, by the next 24 hours, this thread will go into archive, and DEAD. the same thing happen to my previous 'asking-for-help' thread. maybe some of the guys think this is just a stupid thread create by a lazy-to-search noobie. whatever. or maybe magician people is more helpful than wizard's.hmm we'll see how it goes
I am having to same problem and would like to resolve it.
Me three.
I have a BT Headset that isn't stereo and does not support A2DP - and it never had this problem. Audiogain does NOT work on devices not manufactured by HTC.
I have also experienced this problem, its hard to tell but i think the problem started after installing voice command, ihave since had the phone restored to default rom and it was fine during this period, i now have new rom with vioce command built in and problem has come back..try uninstalling VC if you can or use a rom without it on.
So, I turned on BT in the car, paired with handfree kit, all went well... but as long as BT is turned on on the device, it keeps waking up after 1 min, and stays on... anyone know how to prevent this? ain't exactly helping my battery life...
thanks
a--
Man, read a little bit trough those posts...do a search...wherever...
DANDANA said:
Man, read a little bit trough those posts...do a search...wherever...
Click to expand...
Click to collapse
I did ... really...
You did not. I have answered this question at least 5 times, twice with full explanation, 3 times just with links. It's really annoying, especially if we have robust search and gigant knowlegde database, not to say anything about Wiki. I know thinking of good question needs a bit of understanding of computers (You canot ask natural language questions), but still some effort is not so painful.
jakubd said:
You did not. I have answered this question at least 5 times, twice with full explanation, 3 times just with links. It's really annoying, especially if we have robust search and gigant knowlegde database, not to say anything about Wiki. I know thinking of good question needs a bit of understanding of computers (You canot ask natural language questions), but still some effort is not so painful.
Click to expand...
Click to collapse
listen man, I searched for "bluetooth turns device on" "bluetooth standby problem" etc etc. I CANT FIND ANYTHING USEFULL.
Yeah, right...
Here you go: http://forum.xda-developers.com/showthread.php?t=288658&highlight=bigmike+fix
Datake said:
So, I turned on BT in the car, paired with handfree kit, all went well... but as long as BT is turned on on the device, it keeps waking up after 1 min, and stays on... anyone know how to prevent this? ain't exactly helping my battery life...
thanks
a--
Click to expand...
Click to collapse
Yes, a VERY annoying issue. Besides Bigmike's fix, you can also try installing Broadcom bluetooth stack. I haven't had a chance to try it yet but apparently it fixes the BT turning on issue. See this post:
http://forum.xda-developers.com/showthread.php?t=328982
PoGa
poga said:
Yes, a VERY annoying issue. Besides Bigmike's fix, you can also try installing Broadcom bluetooth stack. I haven't had a chance to try it yet but apparently it fixes the BT turning on issue. See this post:
http://forum.xda-developers.com/showthread.php?t=328982
PoGa
Click to expand...
Click to collapse
i'm testing that, but it seems it needs work... BT only works if I keep the manager running, close the manager = BT stops working...
edit: patch2 seems to keep BT running, need to test my handsfree and gps receiver this afternoon, but looks promising...
Datake,
cool. Can you please post your results in here? I'm also interesed in fixing this but didn't have a chance to play with Broadcom stack yet...
PoGa
Hi there,
I've recently had someone ask me how to resolve the following issues on the Touch HD.
End key, when set to lock the handset, isn't.
Ringtone ending too quickly, so the ringtone stops ringing, but the caller still hears ringing and the call can be answered (this is also happening on my HTC Hermes).
The other thing is, where the handset is shutting off overnight, meaning the person who owns the phone misses the alarms which were set, due to it being off.
Is there anything I can say to this person to sort these problems?
Thank you,
I think more people are inclined to answer you if you put a topic of note on your post.
"Some" doesn't really cut it does it.
As for your issues...perhaps the ring tone is set to only play once in the settings which is why it's stopping.
As for the lock...did you have S2U2 on at some point?
Remember the topic thing for next time please!!! I hate those sort of topics
Firstly, the topic is a minor issue, since I had already typed it, and it hasn't fully shown.
I'll edit it to reflect what it should've been, I'm not the typical n00b user of forums, and I do try to be fairly to the point.
Secondly, which part of "I've recently had someone ask me" do you not comprehend?
This is NOT my phone, therefore I do not know what has been done, and what hasn't been done.
The original user is someone who contacted me recently, and I'm trying to find the best way to resolve these issues.
As for the ringtone, I know on my phone its set to be continuous. Only by pure luck somehow I managed to answer my phone after its first beep this morning, half asleep, but it had beeped once from my ringtone and stopped ringing on my end.
If you can explain S2U2, that would be handy.
Thank you,
Upon reflection, do you agree it might be prudent in future to ascertain what steps have already been taken to rectify said "problem" before posting?
As for S2U2 - it's an application (there are others like it) that locks the screen of the phone - I have seen applications like this disable the default locking mechanism upon uninstallation. That was the reason for me asking - perhaps you could get your friend to check that?
Greeee said:
Secondly, which part of "I've recently had someone ask me" do you not comprehend?
This is NOT my phone, therefore I do not know what has been done, and what hasn't been done.
Click to expand...
Click to collapse
I'm quite sure he understood what "I've recently had someone ask me" means - but you can't really expect us to help you in any way if you can't answer any follow-up questions! It's pure guessing this way!
Greeee said:
If you can explain S2U2, that would be handy. Thank you,
Click to expand...
Click to collapse
S2U2 is a locking app available here: http://s2u2.ac-s2.com/
I've used it myself for a while and never had any issues. But I guess Wiggz is hinting at problems that might arise after uninstalling S2U2 (I hard-reset my device instead of uninstalling - so I have no idea) since S2U2 sorta does the same job as the standard locking using the end-key.
A hard-reset would probably fix all three issues - but I guess that isn't really an option if your friend asked you for help... :/
I'll have a look into the S2U2, and get this person to try it.
Since the handset has only recently been delivered from replacement, I can't see how a Hard Reset will work, but always worth a try.
What would you recommend with the custom ringtone issue? It happens on my hermes also, so not sure what would be causing this.
Greeee said:
I'll have a look into the S2U2, and get this person to try it.
Since the handset has only recently been delivered from replacement, I can't see how a Hard Reset will work, but always worth a try.
What would you recommend with the custom ringtone issue? It happens on my hermes also, so not sure what would be causing this.
Click to expand...
Click to collapse
Are you sure the ringtone is of sufficient length to match the ring/pickup pattern - i.e. 30 second ringtone for 30 seconds before voicemail?
I had this problem with my alarm when I first used it.
Hi @ all,
i know my thread is in a wrong place but its time to give more attention to this issue which is concerning a lot of hd2-Android users.
As you all know the htc hd2 is a smartPHONE.
It's most important function is to let us make our phone calls without any trouble!
But there's a problem:
A lot of users complain about the screen staying off after having made a phone call. It doesn't turn on unless you hold the phone in a bright light. No chance for anybody who's in a darker environment at that time. Hardware keys also don't let the screen turn on again. So often the only way to solve this problem is taking out battery and reboot.
This is REALLY annoying and ashaming for all users, i mean we have one of the greatest phones for custom roms, but we can't make a proper phone call -.-
So to sum up: There are several threads already opened, with no solution and no real end.
My wish to all the great Chefs and developers out there: Thanks for your hard efforts so far.
But PLEASE try to fix this issue. Perhaps deactivating the proximity/light sensor, or just making the phone let its screen turned on during a call might be a solution?
So many roms out there with hundreds of versions but no one works for me and many others without this issue.
PERSONALLY, i don't care if my rom has ultra-spectacular-amazing quadrant score or the latest sense 3.0 shich has still bugs.
Just a stable rom for using our hd2 as a real phone, that's what so many want, so hard to understand?
Thanks, for reading.
BTW: the hint to make the proximity/light sensor clean doesn't work, and some users don't understand the scren-off issue, i know.
screen after call
I have the opposite problem - my screen remains unlocked after phone call which is a big problem when the phone is in my pocket and i'm answering with a BT device.
I usually find the phone is some strange settings screen or some app running.
pcmanuser said:
Hi @ all,
i know my thread is in a wrong place but...
Click to expand...
Click to collapse
There is no "but", If its in wrong place its in wrong place.
If you have this issue its likely rom related as this isn't a wide spread general issue as I have personally never experienced it.
if you want to discuss this issue reply in the appropriate roms topic, You are not a dev and not posting dev work/reference.
uhuuhu...
NO, it's NOT rom related. I think testing about 10 of the most popular roms here is enough...
Just search for it. I said it before some people don't have this problem but there are also many others who have it.
BTW: askin in the roms section was intending to get attention as wehenever yopu aks for it in the thread of the rom no one cares.
Just sad that the most "Devs" think building a rom is just abaout making it looking cool full of unnecessary special addons and customisations...
- make the performance better here please -
Rooted phone running stock ROM, screen wakes up when answering calls via Bluetooth while phone is in my pocket. Either my call will get cut short because the END button gets pressed inadvertently, or it will start dialing randomly after the call has ended because the screen is still awake. I've tried to no avail to figure out how to keep the screen OFF when using the Bluetooth to answer, or when it's in my pocket.
Any ideas? This is the single biggest issue that makes me hate this phone with a passion...
Google...
http://lmgtfy.com/?q=Keep+screen+off+when+answering+calls+with+Bluetooth
http://lmgtfy.com/?q=XDA+Keep+screen+off+when+answering+calls+with+Bluetooth
can try this app: https://play.google.com/store/apps/details?id=com.itsme4ucz.screenoff&hl=en
https://www.reddit.com/r/AndroidQue...ng_screen_off_when_in_pocket_and_taking_call/
http://forum.xda-developers.com/tmobile-galaxy-s5/help/screen-stays-answering-bluetooth-t2857392
http://www.droidforums.net/threads/...w-keep-screen-off-during-bluetooth-calls.html
Seems to be a pretty popular issue, no need to hate on the 10..
andybones said:
Google...
http://lmgtfy.com/?q=Keep+screen+off+when+answering+calls+with+Bluetooth
http://lmgtfy.com/?q=XDA+Keep+screen+off+when+answering+calls+with+Bluetooth
http://www.droidforums.net/threads/...w-keep-screen-off-during-bluetooth-calls.html
Seems to be a pretty popular issue, no need to hate on the 10..
Click to expand...
Click to collapse
I respect your expertise on this (and other) devices, but this was TOTALLY unnecessary, and uncalled for. I HAVE Googled. I HAVE Bing'd. I HAVE Dogpiled. All my searches have proved fruitless, hence the reason I posted the question. Even when I began creating this post, this site suggested similar threads, none of which provided me with an answer.
Thanks for the suggestion, all the same.
Freedom First said:
I respect your expertise on this (and other) devices, but this was TOTALLY unnecessary, and uncalled for. I HAVE Googled. I HAVE Bing'd. I HAVE Dogpiled. All my searches have proved fruitless, hence the reason I posted the question. Even when I began creating this post, this site suggested similar threads, none of which provided me with an answer.
Thanks for the suggestion, all the same.
Click to expand...
Click to collapse
I think you may have taken my post wrong, I meant no disrespect.
You gave no explanation of what you've tried and it seemed as though you zeroed out this device when I found easily that's not the case.
Either way, best of luck. :good: