Touchpal on Manila 2D - Touch Cruise ROM Development

After suffering for a long time having to use the integrated keyboard instead of Touchpal due to the fact that it wasn't installing on Manila 2D I decided to go on Touchpal's official website and download the newest version (for WM 6.1, not 6.0) and it worked! I decided to share this because I've seen that there have been other people also unable to install Touchpal.
To download the newest version go to http://www.cootek.com/download_userinfo.aspx?type=Std and be sure to choose the version for WM6.1.
Hope this helps someone!

Related

which WM6 too choose?

hey guys i've upgraded to Helmi Windows Mobile 6 the first day it came out but as i see right now there is other versions of wm6 , which one is better more stable less bugs and so on ....
Thank You
yup, same question here..
actually my OS is Helmi Windows Mobile 6 Profesional R0 CE OS 5.2.1620 (Build 18125.0.4.2) , and i would like to know if it's better to switch to WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) or WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
i hope that somebody who tested these 3 version's could help us
thanks in advance
Luis
newkpt said:
yup, same question here..
actually my OS is Helmi Windows Mobile 6 Profesional R0 CE OS 5.2.1620 (Build 18125.0.4.2) , and i would like to know if it's better to switch to WM6 Pro CE OS 5.2.1933 (Build 18533.0.7.0) or WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
i hope that somebody who tested these 3 version's could help us
thanks in advance
Luis
Click to expand...
Click to collapse
For those who dont know, PDAViet has just released a new BA rom with thse spec : WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5.
it has built in TouchFlo, and als the latest .NetCF 3.5 as Extrom...
I also have tried all the WM6 version since Helmi R0 release, Xplode's latest rom and PdaViet's WM6 OS 5.2.2000 (Build 20000.1.0.0.PV.HAT).
All are good, stable and fast.
I tried Xplode's latest rom for only 1 day and switched back toPdaViet's cause I had problems:
1. Somehow, the OK button (on top right hand corner) close apps without saving it (I had this problem when using PocketInformant and PocketBreeze - weird. I put it on forum, but no one else seem to have this issue)
2. I feel that the touch screen is not as responsive as other roms -I dont know, maybe I was wrong...but this is what i feel anyway
For now, I am using PdaViet's latest rom WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5.
, and its very good...
hey i hv tested all the three but i hv not found big changes in them and switch back to helmi as i hv the backup of it. all three r same as they r helmi based. so i advised to go for helmi it also has gsfinder as file explorer.
which is the best
I have tried have all three of the latest roms but the ones that are the newest is pdaviets rom with office 6.1 and xplodes. Hemlis wm6 is older than the others so any of the other 2 are better.
It seems that the speed of xplodes and pdaviets are ABOUT the same but i find that pdaviets rom is slightly faster- programs open faster, and there is no stalling. Pdaviets is more stable- when i installed pdaviets 5.2.000 i only soft reset it about once- it works flawlessly. I can open more programs at the same time without stalling and freezing with pdaviets than with xplodes. With a great combination of stability and speed pdaviets takes the cake.
Although i can not use the touch flo cube that comes with pdaviets because of i can not get rid of my older version of touchflo i installed in my BA- for some reason i can not uninstall it or remove it but i hear it works like a charm.
shazzy84 said:
I have tried have all three of the latest roms but the ones that are the newest is pdaviets rom with office 6.1 and xplodes. Hemlis wm6 is older than the others so any of the other 2 are better.
It seems that the speed of xplodes and pdaviets are ABOUT the same but i find that pdaviets rom is slightly faster- programs open faster, and there is no stalling. Pdaviets is more stable- when i installed pdaviets 5.2.000 i only soft reset it about once- it works flawlessly. I can open more programs at the same time without stalling and freezing with pdaviets than with xplodes. With a great combination of stability and speed pdaviets takes the cake.
Although i can not use the touch flo cube that comes with pdaviets because of i can not get rid of my older version of touchflo i installed in my BA- for some reason i can not uninstall it or remove it but i hear it works like a charm.
Click to expand...
Click to collapse
What do you mean you cannot get rid of the older version of touchflo? After reflashing the new rom, whatever you have before will be gone..... just make sure you do the no yes yes option...
And you are rite, touchflo on Pdaviets latest rom works very well...
Just want to say yes, I am using latest rom of PDAViet too, and I love it. All bugs seems fixed. I just don't like the touchflo as I was using HTouch before and it works better (quicker, smoother, no flare, more open to add links...)
ftouch
joseph.sapri said:
What do you mean you cannot get rid of the older version of touchflo? After reflashing the new rom, whatever you have before will be gone..... just make sure you do the no yes yes option...
And you are rite, touchflo on Pdaviets latest rom works very well...
Click to expand...
Click to collapse
I installed a previous version of ftouch before the one in pdaviets came out and i installed it on my hemli wm6 rom when it first came out. I did uninstall the program but although the file was removed touch flo was still active on my BA. No matter how many times i have flashed my BA to another rom ftouch is installed on my BA. It is very weird.
I did however find the ftouch program and it is located in my BA "windows" folder under "startup". When i try to delete that it says thats the file can not be deleted. I am not sure what you are talking about when you say " no yes yes" option because everytime i flash a rom it goes to the align screen option. Any help would be appreciated.
shazzy84 said:
I installed a previous version of ftouch before the one in pdaviets came out and i installed it on my hemli wm6 rom when it first came out. I did uninstall the program but although the file was removed touch flo was still active on my BA. No matter how many times i have flashed my BA to another rom ftouch is installed on my BA. It is very weird.
I did however find the ftouch program and it is located in my BA "windows" folder under "startup". When i try to delete that it says thats the file can not be deleted. I am not sure what you are talking about when you say " no yes yes" option because everytime i flash a rom it goes to the align screen option. Any help would be appreciated.
Click to expand...
Click to collapse
the no yes yes option refers to cleaning up the rom i.e. similar to the concept of formating the whole rom data.... you should do this after reflashing a new rom build.
when you reset and you get to the 3 colored screen, press and hold camera + record button for about 2 sec... use record button to choose, camera button to change no/yes... and then press mail button to confirm...
its all in wiki, under the instruction on how to update rom...
I prefer Xplode's latest release...its the fastest one by far, in my experience...can't really fault it at all....I dont like the Touch Flo...it's too slow on the BA...and I don't find it beneficial at all...just a waste of resources.
joseph.sapri said:
the no yes yes option refers to cleaning up the rom i.e. similar to the concept of formating the whole rom data.... you should do this after reflashing a new rom build.
when you reset and you get to the 3 colored screen, press and hold camera + record button for about 2 sec... use record button to choose, camera button to change no/yes... and then press mail button to confirm...
its all in wiki, under the instruction on how to update rom...
Click to expand...
Click to collapse
excellent! Thanks a lot joseph sapri! I just did it and i have so much more rom space and the ftouch is gone! MUCHO appreciated
no probs. I was in your position before.. . This is what this forum is for...
i see by far more people like PDAViet release
could any one provide download link and is there any thing special we have to do to upgrade from helmi WM6 ?
Thanks
Download links are in corresponding threads - THE FIRST POST usually
You should backup your data before flashing, upgrade procedure is the same as for any WM6.
Here is the link to the rom, as posted by Iced Coffee...
http://www.4shared.com/file/31606851/8e53a788/ROM_BA_Touch_8002.html
Just do normal upgrade procedure....
joseph.sapri said:
Here is the link to the rom, as posted by Iced Coffee...
http://www.4shared.com/file/31606851/8e53a788/ROM_BA_Touch_8002.html
Just do normal upgrade procedure....
Click to expand...
Click to collapse
I just upgraded using this rom, but the sim card cannot be recognized. Any suggestions?

Import Manila to hp 614c??

Good morning guys. I searched it but I didn't find anything. Is it possible to import Manila (tf3d from HTC diamond) in hp 614c? Thank you
manilla 2d is possible if u have a english rom and it works very well for me.
Can you explain how to do it
Sorry for the stupid question but are you talking about the port of the 2D manila interface, running on HTC 3g? If so, please tell me where in the forum can I download the installation files. Are there any specific issues with the ipaq 614.
http://forum.xda-developers.com/showthread.php?p=2277642#post2277642
You can also try this ROM (WM 6.1):
http://rapidshare.com/files/165082651/614_WM6.1_19971.rar this beta but stable.
password: israpda.com
Manila is in there and works very fast and stable. The same for ROM.
ROM has been cooked by Yevg001 from 4pda:
http://66.102.9.104/translate_c?hl=...rt=280&usg=ALkJrhigVfV9tLK4nQjO6pm00-lUGJN42g
To flash the firmware:
1. Unzip archive using provided above password
2. Copy flash.dio to SD card (important!!! it must by SD (<2GB) not SDHC card)
3. Turn the device off (push and hold power button)
4. Insert your SD card
5. With the same time push: record, mute and power button
6. After ~1sec release power button then remaining buttons
7. You will get "SDloader"
8. Do not touch anything until iPAQ boot itself (you can observe progress bar)
You have done...
Regards,
Bigu1975
Have you tried this rom? It has manila cooked in right? I have the auto shutdown problem with my ipaq, is it safe if i install teh power update patch by hp before putting this rom? I guess it's only rom, not a radio update so it won't affect it, but i don't want to brick it after all... Thanks
Axlastro,
Yes I am using this ROM. It is very fast and stable (it has 12MB pagepool).
Yes Manila is cooked in.
If the power update is a just patch for ROM I believe you can install it just after flash, but if I were you I would rather wait and see if the same problem is in the new ROM - if it is then I will make the patch installation.
Yes it is only Operating System (ROM) update.
Axlastro,
Yes I am using this ROM. It is very fast and stable (it has 12MB pagepool).
Yes Manila is cooked in.
If the power update is a just patch for ROM I believe you can install it just after flash, but if I were you I would rather wait and see if the same problem is in the new ROM - if it is then I will make the patch installation.
Yes it is only Operating System update.
Manila to hp 614c italian rom
I have a italian rom and it works
ROM Version
bigu1975 said:
Axlastro,
Yes I am using this ROM. It is very fast and stable (it has 12MB pagepool).
Yes Manila is cooked in.
If the power update is a just patch for ROM I believe you can install it just after flash, but if I were you I would rather wait and see if the same problem is in the new ROM - if it is then I will make the patch installation.
Yes it is only Operating System update.
Click to expand...
Click to collapse
Which ROM are you useing? I am using HP IPAQ 614c CE English OS 5.2.20757 (Build 20757.1.4.0) OS 5.2.20757 (Build 20757.1.4.0) v 1.5 (yevg001) Having a hard time with BT
Formally this is WM6.1 v1.6. I described it in post #5 (above).
re: bigu1975
Hi there. I installed this rom : http://forum.xda-developers.com/showthread.php?t=446243 ,but it doesn't have manila cooked in. I will be flashing it again with the rom posted in the site. I noticed that some of the netcf programs won't work - they exit and report error. I'm satisfied with the overall performance of the wm 6.1 rom - it has all the hp goodies and even the camera works better i also notice far better booting times and file system read/write speeds. I do have active sync problems - the device doesn't always connect. So finally my question : Do you have any particular problems like those described by me with the version of the rom you are using.
axlastro said:
Do you have any particular problems like those described by me with the version of the rom you are using.
Click to expand...
Click to collapse
Hi,
In general I don't have any problems related to programs. Mentioned ROM is clean, stable and it is very fast. It includes the same as HP ROM with new kernel from WM6.1 + Manila and some other useful applications which are tested and they are working fine.
I have noticed only one minor problem related to toggle WiFi using TouchFlo. It can be simple solved by the following method:
http://forum.xda-developers.com/showpost.php?p=2954341&postcount=9
ActiveSync - I noticed similar problems on WM6.1 on different devices. I think it is caused by ActiveSync itself. IMHO the problem is when you connect your device with ActiveSync already running. Then described problem appears. When ActiveSync is not running then it is fine. I hope I solved this problem by adding (in ActiveSync) dummy server and by setting the Sync time to manual. This already described, on this forum, solution protect ActiveSync against automatically start and also helps on syncing issue.
I have used many ROMs for 614C and I think Yevg001's ROM are simply the best. This one is the fastest one I tested. After few days of testing I recommend this one
Regards.
I have few bugs.
When I add MyFaves widget touchflo would not start and
Internet widget is not working for me?
Anyone has the same problem?
Rajnus said:
I have few bugs.
When I add MyFaves widget touchflo would not start and
Internet widget is not working for me?
Anyone has the same problem?
Click to expand...
Click to collapse
MyFaves it is TouchFlo problem. I don't use it
Internet widget doesn't work because there is no Opera browser in this ROM. I think when you install Opera it start to work. On this Manila version the Internet browser link is hardcoded to Opera. As I know in the newest Manila version it is possible to change the link to different browser. At this moment the newest Manila works only on HTC devices - we can't install it on our HP.

PDAVIET ROM WM 6.5 CE OS 5.2.21820 Build 21820.5.0.40

This is not mine ROM, this is ROM from Mr. TranMinhMan, i only post info and link
ROM Informations:
- CE OS 5.2.21820 Build 21820.5.0.40 PV T2M.
- .NET Compact Framework 3.7.8345.0
- AdobeFlash
- Advanced Configuration Tool v3.3.0.0 by Julien Schapman
- CHome Editor v1.6 Beta by showaco
- dotFred Task Manager
- HTC Album
- HTC Booster
- HTC Camera 5.0.4
- HTC Comm Manager
- HTC Iolite PhoneCanvas
- HTC Random Access
- HTC Sim Manager v6.60
- HTC TaskManager
- htcAddicts cleanRAM v1_5_5
- PIM Backup v2.8.0.0 by FdcSoft
- PocketNotepad v4.0.10
- Pocket RAR v3.80 by Alexander Roshal
- PocketScreen v1.3 by JJM. Roseboom
- Synchro Time v0.95 by Dennis Grachov
- Total Commander CE v2.51 by Christian Ghisler
- psShutXP (mod)
- Windows Media Player 10.3 Build 21820 (mod)
- Bootscreen (mod)
- Some small games.
The suggestion Radio: 1.59.X.X
Up ROM Guides:
- Your Polaris must be HardSPL before up ROM.
- This ROM just has Operating System only, no Radio.
- Download and extract with the password below. Connecting Polaris with PC through USB.
- Running file ROMUpdateUtility.exe and following step by step on the windows => Polaris run BootLoader state and loading 100% => Polaris auto reset and you have new ROM.
Thread on PDAVIET can be found here: http://www.pdaviet.net/showthread.php?t=60010
Download link: http://www.4shared.com/account/file...IET_ROM_WM65__Core_21820__by_TranMinhMan.html
Password: TranMinhMan
thank you...
thanks!!!!! downloading right now!!!!!
Hi, Petulinek.
Thank you for sharing this wonderful ROM with us.
This is the first time I am flashing my ROM to 6.5 and I have chosen your ROM based on your reputation and recommendations from others. I am a little worried at first but I must say that the result has been better that I expected so far.
Just one question though, I uses the built-in locking mechanism to lock my phone. Also, I runs Mapking 2007 navigation software on my mobile phone. However, I find that, unlike WM 6.1, even though when Mapking is logged on and running, the locking mechansim still kicks in, rendering the need to unlock it. Is there a way to work around this and still have the locking function active?
Regards.
This rom works on this release very well. After install more then 60mb Ram is available. I think 3d driver is also included. All is working smooth and well.
I flashed this ROM and so far so good... It's fast and stable. I love it. I installed Opera 9.7 and it's work very well. Thank's for this ROM.
BTW... can somebody give me a link for MANILA2D in CAB version ??? (Working version.. )
Greatest Work.
Stable,Fast and without Bug.
Many Many Thanks.
calator40 said:
I flashed this ROM and so far so good... It's fast and stable. I love it. I installed Opera 9.7 and it's work very well. Thank's for this ROM.
BTW... can somebody give me a link for MANILA2D in CAB version ??? (Working version.. )
Click to expand...
Click to collapse
Manila 2D link:
http://forum.xda-developers.com/showthread.php?t=398173
Thank you very much for M2D link ...
Biotouch.exe problem and Touchpad Input
Hello,
I just upgraded my XDA Orbit 2 / HTC Polaris 200 to the HTC POLARIS - PDAVIET ROM WM6.5 (Core 21820) by TranMinhMan.
THANK YOU!
2 questions, because I think the hardware is really at its limits here
1. when I try to slide up what used to be TouchFLO, I get an error message "Biotouch.exe" could not be opened and please try to reinstall.
CAN I / MUST I fix this?
2. somehow it just gives me 4 options for input and the keyboard is too tiny on my screen. Is there no way to use the Touchpad (called in German "Touch Tastenfeld" and is basically the keys set up like on a mobile phone?
This would be a reason to reinstall the official WM 6.1 Pro because I cannot type anything on the go this way.
THANK YOU FOR YOUR HELP !!!!!
chaotixxda said:
1. when I try to slide up what used to be TouchFLO, I get an error message "Biotouch.exe" could not be opened and please try to reinstall.
CAN I / MUST I fix this?
Click to expand...
Click to collapse
In settings - system - Advanced Settings disable in HTC TouchFLO :
Scrolling, Cube, Sound...
Then press Done, reboot and system will be little faster without error message about Biotouch.exe
chaotixxda said:
Hello,
2. somehow it just gives me 4 options for input and the keyboard is too tiny on my screen. Is there no way to use the Touchpad (called in German "Touch Tastenfeld" and is basically the keys set up like on a mobile phone?
This would be a reason to reinstall the official WM 6.1 Pro because I cannot type anything on the go this way.
!!!!!
Click to expand...
Click to collapse
Install EzInput ver 1.X because 2.X is in development...search and you find it...on my polaris (orbit 2) it go 100 percent...
touch in german "Tastenfeld"
look at this post....:
http://forum.xda-developers.com/showthread.php?t=426281
Hi
thanks for this Stable ROM.
How can I change the right soft key to 'Comm Manager' from 'set' in the today screen?
thanks
[email protected] said:
Install EzInput ver 1.X because 2.X is in development...search and you find it...on my polaris (orbit 2) it go 100 percent...
Click to expand...
Click to collapse
EzInput 2.0 is developed and works fantastic :
http://forum.xda-developers.com/showthread.php?t=506846
battlestartaurus said:
"Just one question though, I uses the built-in locking mechanism to lock my phone. Also, I runs Mapking 2007 navigation software on my mobile phone. However, I find that, unlike WM 6.1, even though when Mapking is logged on and running, the locking mechansim still kicks in, rendering the need to unlock it. Is there a way to work around this and still have the locking function active?
Regards.
Click to expand...
Click to collapse
Hi,
can anyone help with this issue, please?
I installed EzInput 2.0 It's a very nice keyboard and work fine. But I have a question... How can I input new words in dictionary in XT9 mod ?? Can somebody help me???
Petulinek said:
EzInput 2.0 is developed and works fantastic :
http://forum.xda-developers.com/showthread.php?t=506846
Click to expand...
Click to collapse
Your link goes to (W)VGA version.
No QVGA there.
Sascha
[Edit]Here is QVGA
Thank you for this rom
No thumbnails or screenshots?

[REQ] Stable version of HTC Keyboard (EZinput) for WM6.1 ROM?

Hi,
I'm looking for a .CAB of a newer version stock HTC keyboard (EZinput) on the WM6.1 ROM version which is stable and bugfree.
I installed the topaz keyboard from here:
http://miri.warsoft.com/cabs/cabs.html
but it keeps bugging out with half the keyboard disappearing, the bottom half being black! this is only fixed by deselecting the keyboard then selecting it again!
Any help much appreciated!
Nevermind, I ended up installing Dutty's 3.9 WM6.1 ROM from here: http://forum.xda-developers.com/showthread.php?t=507372
It works great! Excellent fast stable rom, except the new ezinput no longer allows you to highlight text and copy it, thats my only annoyance.

Update manila 2.1 to 2.5/2.6?

Hi Guys,
i have a TP2 with Windows Mobile 6.5 and Manila 2.1. But i would like to make an Update to version 2.5 or 2.6.
Unfortunaly HTC gives not an official update and i need the original rom cause CoPilot
Can someone give me a cab of version 2.5 or 2.6? If it possible in German
Evil_Sadness
srry so far there is no cab to upgrade with. if you want 2.5 you have to use a cooked rom. htc said they will be gettin a 2.1 to 2.5 upgrade just no time line.
I would use a cooked rom, but its realy hard to find a rom where copilot live is already installed or to find a cab of copilot.
There is an release of copilot on the htc site but there comes always a error if i want to download. "your device is not compatible"
thats the problem
Evil_Sadness said:
Hi Guys,
i have a TP2 with Windows Mobile 6.5 and Manila 2.1. But i would like to make an Update to version 2.5 or 2.6.
Unfortunaly HTC gives not an official update and i need the original rom cause CoPilot
Can someone give me a cab of version 2.5 or 2.6? If it possible in German
Evil_Sadness
Click to expand...
Click to collapse
You won't find Sense 2.5 in CAB form
However, this ROM has Sense 2.5 and CoPilot:
http://htcpedia.com/Rhodium-AF-manila-2-5-PTG-V1/soft/htc-rhodium-rom.html?page=1
OR, I've just downloaded CoPilot from the HTC website and placed it here for you:
http://www.megaupload.com/?d=NJGZTPSC
Hope this helps?
iridium21 said:
You won't find Sense 2.5 in CAB form
However, this ROM has Sense 2.5 and CoPilot:
http://htcpedia.com/Rhodium-AF-manila-2-5-PTG-V1/soft/htc-rhodium-rom.html?page=1
OR, I've just downloaded CoPilot from the HTC website and placed it here for you:
http://www.megaupload.com/?d=NJGZTPSC
Hope this helps?
Click to expand...
Click to collapse
HEY BIG THX to you that helps very much!!
Evil
Yes that helps!! Thank you very much

Categories

Resources