Related
:evil:
Hi everyone,
am deperately needing your advice!!!
Just yesterday I rechieved an exchange mdac from tmobile showing serial version v1.02 when put in bootloader mode(previously v1.01).
When trying to flash whatever rom once transferred via ntrw to my sd card, my mdac does simply nothing but stay in bootloader showing serial v1.02. No flashing like in my old one starts.
On removing the sd card it comes out freshly formatted, before it definately was formatted with raw as usual once working with ntrw.
Result : I can not upgrade my system to mksbigstorage or any other rom like i could with my" old one". (same sd card!!!)
Tried downgrading to an older rom version via original upgrade routine and from there flashing via sd card: same problem!, tried other sd card: no solution either!
Any ideas, solutions, people with the same problems?
:?:
Appreciate your help
Thanx
romflashing
Seems to have nothing to do with flashing routine.
Card simply gets formatted once inserted.
Any way to stop this?
Hi! I have had many problems after flashing and re-flashing my rom.
Try boot loader mode and USB then execute (from your PC)MaupgradeUT_noid with a Shipped_rom on XDA ftp. It may work.
Have a look at this link: http://www.mtekk.com.au/forums/viewtopic.php?p=32876
Regards
Try to write SD card with winhex not ntrw. Simply choose open disc feature and write file directly do SD it works every time for me (with ntrw it was roulette). I have 1.02 bootloader
Thanks Shamus but can you explain in details how do you do this with Winhex? my bootloader is 1.00
SPV_M500, ROM 1.12.02 FRE
RADIO 1.12.10
EXTRom no more
problem: radio stack upgrade failed (using the siemens upgrade) and now I get a GSM error and eventually a partial pocket pc desktop with no start menu or access to an explorer window.
OK, I used XDA tools to copy the rom to the SD card (1GB card), inserted in the Wallaby, held the power and soft reset the device, I get the boot loader v5.15 and then a GSM Error. From there, nothing. Any suggestions as to what I am doing wrong? Does the SD card need additional files or should it be formatted a certain way? Any help would be greatly appreciated.
No additonal files are required. Thr progress you describe is the normal....
Are you using an internal SD-Card Writer? They make often problems.
YOu can try dumping your old ROM to SD and check if it will work with this backup. If this is the case the problem is your Card writer.....
Instructions to do this could be found here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD2
Fixing GSM error could be found here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
Siemens SX56 Upgrade Issue GSM Error - Upgrade failed
so I should try using a different card writer? If so, I have an external one that I can try. Should the boot loader still show the GSM Error with the rom on the SD card?
Hi all,
I have some trouble. I tried to flash new ROM from romkitchen.de, but there was an error on 98%. Now the mda, starts to bootloader (wallaby bootloader v5.15). I don't know what to do now. I found this> http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD , So I cooked rom (NK.nb1) and via osimagetool it wrote to SD (is it same like ctrl c + ctrl v ?). But when mda starts, nothing happens - onlz bootloader starts. What's wrong?
thanks for your answers and sorry for my english
you can check if you did it correct by putting the sd card in the pc
if it's containing a rom the pc cant even read the card
if the card have a rom it should flash automaticly when you enter bootloader
it's incorrect. I don't know how to dwrite rom to sd...What format of ram (.nb1 , .nbf) can be written to sd by osimage?
one choose the sdcard reader as distination
and osi should be able to work with both nb1 and nbf
well...but sd card still can be read in pc. SD i ve god sd reader in my ntb... :/
where did you get the nb1 or nbf ?
only wallaby roms will work
yes, i know it. rom is from romkitchen.de
What for Cardreader are you using? Internal devices often causes problems....
If you have another person that has a wallaby you could backup his rom on the sd-card and install it on your device....
The ROM in nb1 or nbf have to be written via osimagetool. I is written in special format and it is complete different from ctrl + c -> ctrl +v.....
Stefan
i use cardreader in my notebook asus a9n. I'll try it on another pc
Hi all,
I have a spv m650 Orange with an Usb witch doesn't work. I connect my phone on my Pc, the spv is in charge but the icone of active sync is never green.
with my Cruise all is Ok.
I try to upgrade the spv with the sd cards but the bootloader anwers "Invalid certificate".
I think that it's normal because I have a SPL 1.84.
I would like know if I can change my SPL with my sd card?
If no, I would like found a rom witch work with this SPL.
when I use the ARTEIMG from orange (update 4_07) I don't have this message, the SPV displayed read sd card but nothing else.
Know, my SPV stay only on the first screen with the Version dysplayed:
IPL 1.84.0001
SPL 1.84.0000
GSM 02.67.90
os 1.84.0.0
and this I do a hard reset ,it's same.
if someone could help me, it will be nice.
For your M650, you have the a Orange ROM (probably 03-2007), you must :
-USPL before new upgrade (without Orange)
You must have a SD-CARD in FAT32 and a rom file (name ARTEIMG.nbh)
For AS, do you reset your phone, and reboot your PC ?
I had this problem with a M650, the usb connector was HS (the pins move)
Thank for your quick answer,
Yes, my sd card is in fat 32.
and when I try to upgrade with the bootloader, the SPV read well my SD because it can detect the good or bad certificate.
I already reboot a lot of time the PC and the PPC.
I agree with you that this is a problem on the usb Connector.
but I would find the original orange Rom with a good certificate just for go after the first screen.
I
Orange rom : http://www.mobilite.fr.orange-busin...r/entreprise/mobiles/ba/dl.php?mi=164&pi=2580
I already do it,
axtract from this exe the file:
ARTEIMG_ORANGE_FR_B2B_1.84.73.2_21.184.2.733_SHIP.nbh
rename this file by ARTEIMG
running the bootloader
then the spv display:
Update SD Image?
<- Press this key to start download
then the SPV displaying "reading from Sd" under a bargraph witch filling very quickly.
after 5 minutes "reading second OS from SD!"
and after 10 minutes "SD FAT Update failed !!!" I like the "!!!" on the screen...
but my card is in fat 32.
if I try with a card in fat or ntfs, the SPV doesn't see the card.
Make a check (chkdsk) of your SC-CARD, (what is the size of your SD-Card ?)
Rom Orange 04-2007 : http://www.mobilite.fr.orange-business.com/public/oev4/html/toolkit/php/obdddl.php?id=2539
the chkdsk is ok on my sd card of 1Go from sandisk
under the both links, there are the same file
http://www.mobilite.fr.orange-busine...mi=164&pi=2580
ARTEIMG_ORANGE_FR_B2B_1.84.73.2_21.184.2.733_SHIP. nbh
http://www.mobilite.fr.orange-busine...dl.php?id=2539
ARTEIMG_ORANGE_FR_B2B_1.84.73.2_21.184.2.733_SHIP.nbh
ReTry to download the Orange ROM, and Re-try .nbh and upgrade
i'm trying! I'm trying!
You can also :
If your phone is stuck in bootloader mode try this procedure using mtty:
Cmd> set 32
Cmd> password BsaD5SeoA
Cmd> ruurun 0
Cmd> ResetDevice
If this doesn't fix it, you need to flash your original ROM, matching your CID.
Do you try Orange_03_2007 ?
Oooops,
what is mtty?
must I use the cmd on my PC than with my usb connexion?
for your information when I run bootload and after I connect the usb, I can read usb on mthe display.
since half an hour the SPV is always with Reading second OS from SD!
do you have a link for orange_03_2007?
so this afternoon I will try with an other SD card, Maybe...
bonja69 said:
Oooops,
what is mtty?
must I use the cmd on my PC than with my usb connexion?
for your information when I run bootload and after I connect the usb, I can read usb on mthe display.
since half an hour the SPV is always with Reading second OS from SD!
do you have a link for orange_03_2007?
so this afternoon I will try with an other SD card, Maybe...
Click to expand...
Click to collapse
MTTY.exe
For Orange Rom, look with google "mise a jour SPV M650_0307.exe" or "mise a jour SPV M650_0307.zip"
BBK,
I chaged my SD card Sandisk 1Go by a SD card Toshiba 2Go and the upgarde from the sd card run to the end without problem in 10 minutes.
the SPV asked to select any key and after return to the bootloader screen with the three colours.
at this step,I made a soft reset and the SPV go througth the first screen and installed windows.
now the SPV run as the origine with the wm5. it's better than this morning but I don't understandand why it isn't in wm6...
Good news.
You have installed a Orange Rom (WM5), now you can USPL and upgrade with a WM6.5 rom.
You can also upgrade the radio rom, i'm using radio 3.21.90 in France.
For your SD-Card, you can install "ArtemisSDEnhancement.CAB" for correct Artemis bug with sd-card.
After you install "WM5torage_19.cab" and can active it and format you sd-card.
Hi, can you please tell me how do you resolve the problema of the miss connection between usb and phone?
I need help... i ha ve default rom but since today the phone won't connect.
Hello,
this morning I had a bad surprise. My HTC mini doesn't work anymore and now when I turn on, it get stucked on three color screen.
I use the HTC Sense 3.5 rom and, until today, all works great.
I try to hard reset the phone, to reinstall the original rom, but without any changes.
I would like to try some commands from adb or fastboot, but my phone cannot be recognized from this tools. I have try to change the USB driver, I installed the google driver, but without success. Only the htc ufficial rom is installed correctly but when I restart the phone, I have always the three color screen.
Anyone can help me?
Thanks, Alex
what is your os on your computer ?
if windows 7 64 bit install usb eugeniausb drivers and use mtty (you have to select the usb port there) console. phone has to be in tri color mode.
send "task 2a" to the phon, it should format nand and restore radio.
had this problem too, that was the solution
My OS is Windows 7 x64.
I have tried your drivers and now I can send commands with mtty.
I send the command that you told me and in the screenshot that I have attached you can find the results. Are errors normal??
My phone is always in three colors screen.
I must send other commands?
Thanks for the help.
yes, bad blocks are normal.
when you have finished restart the phone and flash official ROM for your device !
Thanks for your patience.
I have flashed the original rom, the whole process works fine, but when the phone is restarted (after completed the installation) the three color screen returns....
hmm, you could try task 28, task 29, then task 2a...
dont remember, i think i have used all of them
No success....:crying:
The three color screen is always there...
what does it show ? (best would be a picture of the screen)
In attachment a picture of the boot screen.
As I say in the first post I didn't do nothing for brick the phone. I only turn off the phone yesterday, and this morning I only turn on it.
Are there some commands that I can use in mtty to understand why the phone is bricked?
Thanks again.
hmm.. everything looks as it should..
i am out of ideas.. what about trying to flash a newer firmware ? (1.07.xxx is pretty old)
I have tried with a new version, 1.36 if i remember well (I don't have the phone here now), but the result is the same.
Anyway thanks for your support. I'll send it to the techinical support or I'll buy a new device.
asorcinelli said:
I have tried with a new version, 1.36 if i remember well (I don't have the phone here now), but the result is the same.
Anyway thanks for your support. I'll send it to the techinical support or I'll buy a new device.
Click to expand...
Click to collapse
I can see your phone hang on spl 1.07 so mean your ruu not installed 1.33! I domnt think that your phone is bricked but I think you have not installed rom (fully) by RUU (mean all parts from ruu). I never success trought ruu (only if my s.n. match ruu! So you need to have gold card in order to install rom (nbh)! Your hboot is all time 1.07 so that mean you done installed only rom parts instead of whole RUU... so definitely you need gold card and you need to reinstall rom by sd card! Of course, always "task 29 than task 2a" before everything
How can I create the gold card?
Is there a tool that can I use?
Thanks!
EDIT:
Now I've a GoldCard, but what file I must copy in the card and what name must have?
I have done several attempts, but I receive always the message "no image file"
asorcinelli said:
How can I create the gold card?
Is there a tool that can I use?
Thanks!
Click to expand...
Click to collapse
You can not create gold card now without working windows phone, so you need to read cid from an working wince in order to generate gold card
munjeni said:
You can not create gold card now without working windows phone, so you need to read cid from an working wince in order to generate gold card
Click to expand...
Click to collapse
I have created a Gold Card with another device and I follow one of the guide on Internet. I think to have done all correctly, and if I restard the bricked phone holding volume down I see for a very small time the message "no image file".
asorcinelli said:
I have created a Gold Card with another device and I follow one of the guide on Internet. I think to have done all correctly, and if I restard the bricked phone holding volume down I see for a very small time the message "no image file".
Click to expand...
Click to collapse
You must to know:
- gold card created for android device will not work! You need gold card for wince!
- sd card can not be biger than 1gb (2gb not tested) !
munjeni said:
You must to know:
- gold card created for android device will not work! You need gold card for wince!
- sd card can not be biger than 1gb (2gb not tested) !
Click to expand...
Click to collapse
Ok, I understand, and so I have a wrong gold card.
I have another WinCE Device and so I could build a correct gold card.
Can you provide me more information? How can I create a gold card for WinCE?
After creating the gold card, what can I copy in the SD? The .nbh of the official rom?
Thanks!
asorcinelli said:
Ok, I understand, and so I have a wrong gold card.
I have another WinCE Device and so I could build a correct gold card.
Can you provide me more information? How can I create a gold card for WinCE?
After creating the gold card, what can I copy in the SD? The .nbh of the official rom?
Thanks!
Click to expand...
Click to collapse
You need revskills software for generating gold card for wince but free version only can read sd card cid, but if you no want to buy it I can generate one for you, just send me cid and I will generate! Chose photon in menu! Do not reverse cid! Search for right cid (you can see many cids but only one is right so see right disk size that match size of the your sd card and copy that cid!!!), than send me a cid by pm and I will send you back file!
About nbh, yes! You need to extract nbh file from ruu and rename it to PHOTIMG.nbh and copy it to sd card... reboot phone to spl and installation will update your photon (but only if gold card is right)!
munjeni said:
You need revskills software for generating gold card for wince but free version only can read sd card cid, but if you no want to buy it I can generate one for you, just send me cid and I will generate! Chose photon in menu! Do not reverse cid! Search for right cid (you can see many cids but only one is right so see right disk size that match size of the your sd card and copy that cid!!!), than send me a cid by pm and I will send you back file!
About nbh, yes! You need to extract nbh file from ruu and rename it to PHOTIMG.nbh and copy it to sd card... reboot phone to spl and installation will update your photon (but only if gold card is right)!
Click to expand...
Click to collapse
Ok, Thanks for the info and for your help!
When I'll come to home, I'll send my CID to you!
I finally restore my phone!!!!!
The goldcard installation works fine!
I post a small resume for others people in case the problem come out to someone else.
After the first try with MTTY I try to follow the "Goldcard way". I try to use an old SD Card of 2GB.
First of all I use the guide for Android, but the gold card doesn't works. After I use the Windows CE way with the help of munjeni, but the result was the same.
In both cases the installation fail with the message "no image file".
Finally I change the SD Card and I use a new one (4 Gb size). I follow the Android guide and in theory I have generated a goldcard for Android.
I copy the PHOTIMG.nbh file in the SD Card and the installation works!
Thanks to schlund and munjeni for the help and for the patience!