Hello,
Does someone noticed about gprs or edge icon in htc wizard.
When the edge icon is disabled ( i.e In default settings ). It shows G Icon at the top of screen, that is normal. BUT when we press the power button at the top of the device and press it again, The device wakes-up. But the G icon changes to E icon and resets after softreset ( i.e G icon )
Points:
1. G icon changes to E icon when we wakeup the device!
2. Only After softreset it goes to normal. i.e G icon but same probem after wakeup!
I tried all the roms in this site but same problem. Also changed the radio rom.
Please someone check this in your phone
Many Thanks
Srikanth.K
The GPRS / EDGE Icon 'E' or 'G' changes according to the service available in the area of use.If the Edge sevice is available in some area,it'll automatically change to 'E',otherwise,it'll remain 'G' as default.
zabardast_1 said:
The GPRS / EDGE Icon 'E' or 'G' changes according to the service available in the area of use.If the Edge sevice is available in some area,it'll automatically change to 'E',otherwise,it'll remain 'G' as default.
Click to expand...
Click to collapse
Hello,
Ok, but why the icon should change only after I wakeup the device.
Another thing I noticed that:
When I connect to internet via GPRS but it shows as connected to EDGE in brackets when I click on that E icon. I do not have any EDGE connections only GPRS!
Thanks for reply
Srikanth.K
GPRS icon not visable after wakeup
Hello.
No reply
Just uploaded some screenshots...
After I start/boot my htc wizard it will be like G icon in top of the bar ( i.e screenshot_1 )
After I press power button the device will go to sleep mode and again I press the some button ( i.e power ) the device will wakeup. but the G icon will be conveted to E icon ( i.e screenshot_2 ) that's the problem.
Another thing I noticed that:
I connected to internet ( i.e GPRS ) before going to sleep mode and I clicked on that G icon and it showed as "connected to GPRS). But when it goes to sleep mode and when I waked it and the icon has changed to E icon. And again I clicked on that E icon and it showed "connected to EDGE" instead of showing GPRS.
I have disabled the "EnableDifferGprsEdgeIcon" setting in registry. Plz you also disable this before you test the my problem.
Plz anyone check it and tell me.
Many thanks
Srikanth.K
GPRS/EDGE is the same thing. gprs is a slower network than edge. it still comes from the same provider. If you notice, in a city you will have EDGE almost always, while in some parts of the country you only have GPRS because they have no need to update towers.
as far as the wizard is concerned I do not believe it is capable of 3G so it will only get EDGE/GPRS.
I tried to use a sim card from ATT but it did not get 3G speeds. My friends phone is also not 3G capable even though it came from ATT.
I'm not sure what your concern is. if you have E vs G it means there is a better network around, but it still comes from the same carrier.
Gprs / Edge
Thanks...
By-the-way. I edited the operator name and given it as cingular. But the my default operator is cellone.
My sim is of BSNL not the at&t.
My problem is that why the icon should change when the mobile goes to sleep mode. After wakeup the icon will be changed ( i.e E icon ) and also my connection details will be changed ( i.e GPRS to EDGE ). This problem only occors upon going to sleep mode and after wakeup.
I tryed all the wm6 and wm6.1 roms in this webiste, all have same thing. But this problem will not occors in WM5. The icon will be G and will not change upon Sleep mode/wakeup.
This problem is only with WM6 & WM6.1.
Many thanks
Srikanth
thats weird.
I sometimes get pissed when im otside of a city and it turns to G. then I feel like I'm in the boonies.
I never saw the issue you are describing. maybe it is your network.
Gprs / Edge
Hi,
OK. I will try with other networks/sim cards.
Many Thanks.
Srikanth.K
Gprs / Edge
Hello,
OK DONE.
Now the E icon is stable/visible after startup and also at wakeup.
What I did is:
1. Enabled the "EnableDifferGprsEdgeIcon" setting in registry.
2. I Downloaded and installed the GB-SOFT GPRS Tweak app.
3. Opened the software and there was 6 tweaks in page.
4. I ticked on the "Search GPRS [G-E-3G] on start radio" box & rebooted.
5. Now: At the startup of my device, the G icon will not display and only the E icon.
6. And also will not change after wakeup ( Thats stable ).
Ok, now the E icon is stable. So I edited the "EnableDifferGprsEdgeIcon" and given it as 0 to disable it ( i.e To show G icon instead of showing E. )
But without luck. The problem rised again.
I think that, this problem is due to RADIO ROM.
I Tested some of other radio roms also but had no luck. Today morning I also flashed to WM5 offical rom but there is now problem with it ( i.e GPRS Icon is stable ).
Do you know which RADIO Roms is the best and fixes my problem.
I tested these 4 Radio Roms:
1. 02.07.10
2. 02.71.11
3. 02.37.11
4. 02.47.11
Many thanks
Srikanth.K
Try these both,they are considered to be the most stable and with good radio signals :-
Radio Rom 2.19.11
Radio Rom 2.69.11
Same problem
Hello
Tryed these radio rom also as you given but have same problem.
I think that the GPRS will search only when wake up but not at the startup of the device.
May be, there are some tweaks in registry that can be made to search the GPRS on startup of the device or an startup app.
Do anyone know that, GPRS and EDGE are the same sevice or thay are different?
Does anyone know that, any software/app that show where I am ( i.e Network Name, Name of area & etc )?
Many Thanks
Srikanth.K
No Reply
Hello........
I still waiting for the answer......
Thanks
GPRS icon inpalce of EDGE
I have O2 XDA mini s and I am connected to EDGE connection and my screen is showing G inplace of E. Pease advice
madan26 said:
I have O2 XDA mini s and I am connected to EDGE connection and my screen is showing G inplace of E. Pease advice
Click to expand...
Click to collapse
Hi,
Try advanced config 3.3.
Thanking You
ksrikanth said:
Hello,
Does someone noticed about gprs or edge icon in htc wizard.
When the edge icon is disabled ( i.e In default settings ). It shows G Icon at the top of screen, that is normal. BUT when we press the power button at the top of the device and press it again, The device wakes-up. But the G icon changes to E icon and resets after softreset ( i.e G icon )
Points:
1. G icon changes to E icon when we wakeup the device!
2. Only After softreset it goes to normal. i.e G icon but same probem after wakeup!
I tried all the roms in this site but same problem. Also changed the radio rom.
Please someone check this in your phone
Many Thanks
Srikanth.K
Click to expand...
Click to collapse
i want change them to 3g can you help me
go to this web site:www.pdafans.com
my id is:jully
Related
Mmmm - just noticed this one...
My little square G for GPRS symbol no longer STAYS on the status bar at the top.
It appears as I soft reset, and find a network, but then disapears.
If I click my signal bar gauge however, the G symbol is shown there.
I know they have changed the Signal Status notification box to list Airline mode now, instead of Wireless off...
So is this another new change, or are the rest of you getting the G to stay on?
I ask, because I actually use my XDA2 on Orange UK, unlocked, but before the Upgrade last night, I still got a solid G stay on with Orange.
Thoughts or comments anyone?
I've actually never seen the "G" stay on the bar with mine, and have been thru several different roms, Qtek, I-mate, T-mobile.
It does exactly as you describe. Personally I don't need to see it all the time.
me too, ever since it never stayed on just popped up to indicate that you've connected to gprs but goes away after a while (started with a 1.52.00 rom)
Same goes for me. I always see the G appear at a start up but never have had the G remain on the screen for more than a few seconds.
On my unit after the Aisa update I can confirm the change in wording to "Turn on flight mode" from "Turn wireless off"
Ed
Aha...
I guess I have already sussed it, but can you guys confirm what type of devices and ROM's you had/have.
As i am certain as can be that my XDA2 USED to keep the G symbol on permanent, just like my SmartPhone Orange E200 does now.
But now, after the new UK ROM update, it doesn't stay on.
Now that I know this is by design, and that the initial appearance is to assure you you have a GPRS signal, and that you can check it any time by tapping on the signla bar, I have to say i much prefer this new method of informing you.
I just wanted to check it wasn't an error first - but I can happily send and receive MMS so it must be working fine.
my xda1 with 2002(org rom) dident keep the icon
my xda1 with 2003 dident keep the icon
and my
xda2 (qtek2020)(org rom) dont keep the icon
ok so i updated new mda us to offical rom 2.26 that tmo has on website and it showed an E for edge all the time ok fine
now when i did a hardreset it nolonger showed the E icon for egde just G
i went ahead and reinstalled update and still showed G i check the registry and it shows EnableDIfferGprsEdgeIcon as a value of 0 why did it change and why does it not show E anyone can help
thanks you guys rock!
-shrug-
After my friend did the update, he had an E.
When I did the update, I had a G, and had to manually set the E in the registry, haha.
I guess it's just funky Windows-ness.
i agree i spoke to tmo data tech support and told them that the tweak sometimes does not hold they refused to realize this problem as after i did 4 updates with same rom i went into reg with total commander and it still showed value of 0 so i did what u did change it to 1 and vola E for edge thanx for replay
Hi.
So are you actually enabling EDGE or just the icon with this reg hack ?
just icon... edge is always enabled newb.
lol ok
what is edge anyway ?
EDGE =
A faster data connection than your standard GPRS. Need a phone that supports it, but the Wizard does, so yeah. ^_^
EDGE is always on be default, but not all areas have EDGE. Where I live in the middle of Alabama, there's no EDGE, but where I work, Huntsville, my icon changes from a G to an E.
Ok simple and possible stupid question...
All yesterday my phone was displaying the E icon next to my antenna showing that there was the possiblity of connecting to the Edge network... Now I happen to work in a area where 3G is not supported but I live in one where its spotty.
I went home last night and while fooling with the phone I noticed the U icon instead of the E... Note I'm NOT using the MEdia connection either, I know this is just simply stating that 3G is currenty avilable where I am.
Now I'm back at work today and the U icon is still there, so I got to test it and when I connect it connects with a mini E above the antenna bars.... So why does my major network icon never change showing me whats avilable?
I installed the HTC Kaiser Dialer + 3G-Batt Icons for my vp3G rom, so I dont know if maybe thats causing it?
I just signed up for media maxx today so I'll test my media connection when I get home to see if it shows up with a 3G...
It doesn't show you what's available. It shows you how you connected, if you are connected.
Um, no it shows whats avilable because this is showing up when my phone is not connected to the MEdia Net service.
Right from the manual.
The LARGE U an E icons are the ones I'm talking about...
Either way I removed the HTC Kaiser Dialer + 3G-Batt Icons program, and it went back to a E icon
so I think it had something to do with that.
The manual is wrong. I am in a 3.5G area, and my connection icon routinely changes from E to U, even while using it.
You're trying to solve something that is not only not solvable, but is also not a big deal anyway.
Dear all,
I was wondering is there a hack in wizards that will keep the "G" or "E" icon on the toolbar?
I mean whenevr you connect it shows G with two arrows or E with two arrows and when you finish and disconnect sometimes the G remains in white box and later disappears and sometimes it disappears right away after disconnection and what remains is an X with 2 arrows.
All i am lookinf for is a GPRS/EDGE scanner to notify me of what is available in the area i am in and if the G remains in a white box it does this function.
Thanks
ihabdawood said:
Dear all,
I was wondering is there a hack in wizards that will keep the "G" or "E" icon on the toolbar?
I mean whenevr you connect it shows G with two arrows or E with two arrows and when you finish and disconnect sometimes the G remains in white box and later disappears and sometimes it disappears right away after disconnection and what remains is an X with 2 arrows.
All i am lookinf for is a GPRS/EDGE scanner to notify me of what is available in the area i am in and if the G remains in a white box it does this function.
Thanks
Click to expand...
Click to collapse
If you use a Wizard.. There is no use for it as far as I understand you question.. This is because the Wizard does not support anything above GPRS..
i disagree my wizard supports EDGE
First post, bit of a lurker here. Just upgraded my XDA2 after (how long?).
So, got the touch HD. And I find it has a [E] or an [H] on the taskbar. I've checked previous posts, and the GPRS is disabled, but I really really dislike the icon being there. The XDA2 didn't have it there, although it also supported GPRS. Is there a reg hack, or a tweak, something I can do to hide the icon? I don't care about the connection, its the icon that's bugging me....?
Or is it that I'm asking the wrong question? Is it the case that if I can see the [G] icon, I must be connected to gprs, and so to hide the icon I just need to kill that connection (something i thought I'd already done)?
The G/E/H/3G icon just shows you what is available, doesn't mean you're connected.
It is possible, i had a taskbar on the diamond, called ahen by sunnyin that had no G/3G/H icon
Not 100% sure on this one, but I don't think you can actually get rid of the icon as that is a WM feature to show you what is available (if you're connected to GPRS/EDGE it will show it on the signal bars). However, what you can do is change the icon which 'G' and 'E' to just be black like the background so you won't be able to see it. Hence the actual icon notification will still be there (taking up space) but you won't see it.
I have the same problem. disabled GPRS and any way of my phone accessing 3G or 2G, but there is still an E in a gray square showing up at the top. This happened after I first installed cooked roms. My guess is that other apps are attempting to access 2G, because another problem linked to this was an error message, ""there is a problem connecting to the gprs service in your registered home network warning", which I've since then fixed (but the E problem remains)
Edit: lol I just realized this thread was years old. but if anybody has a solution, please comment