I just cooked up and loaded a ROM.
Rom 4.00.11 eng
Radio version 6.18.00
During the selection process, I chose sim unlock as one of the wanted features however it did not unlock and now asks for SID cose when I insert forieng sim card. I have even tried to download XDAunlock but it gives me an error message that it cannot find unlcok code?
What's the solution?
Unlock Tool didn´t work with WM2003.
Cook a Rom with 3.17.03 unlock your phone and then upgrade to WM2003.
Unlock-Tool requires the wireless Modem, that is not included in the WM2003
Regards
Stefan
Can I downgrade rom from 4.00 to 3.17?
Anything special to know?
I would suggest you backup your original rom using sd method before embarking on any flashing of the device.
Nah, just flash the phone at will: just remember that you need an SD-card to load anything else once you've had 4.00.10 or 4.00.16 (both T-Mobile ROMs).
I did as X recomended. Flashed to 3.17, unlocked, then flashed to 4.00
It was a breeze. Thanks for the great work. The Kitchen is awesome.
Hey Guys,
during the last three month I tried a lot of roms out of this forum.
But now I want to reinstall the original WM6 on my Herald.
Is it neccessary, to patch my HardSPL down, or can I install it with the 4.7version without problems?
Thans for your help.
Sorber
it will be fine if u keep hard spl as long as you not flashing the stock rom
EDIT: i just reread the post yea you will need to remove it lol
.Sorber. said:
But know I want so reinstall the original WM6 on my Herald.
Is it neccessary, to patch my HardSPL down, or can I install it with the 4.7version without problems?
Click to expand...
Click to collapse
You can flash an original firmware without removing HardSPL. But beware of the fact, that you can't use an original ROM (RUU) without modifiyng the image!
The easiest way would be to use an original RUU and extract the parts of it with nbhtool. Then build a new ROM with the extracted OS.nb and then use the HTC Tool with the new OS.nb and the extracted ExtendedROM.nb and Splashscreen.nb to build a new .nbh.
After that you can flash this .nbh-File (Image).
I hoped it helped a little bit.
step 1. download the software from t-mobile
step 2. remove battery
step 3. hold down the cam button and put battery in. turn on phone.
step 4. you will then see the USB mode on your wing, connect it
to PC
step 5. install software and follow instructions...
thats it.
.Sorber. said:
Hey Guys,
during the last three month I tried a lot of roms out of this forum.
But now I want to reinstall the original WM6 on my Herald.
Is it neccessary, to patch my HardSPL down, or can I install it with the 4.7version without problems?
Thans for your help.
Sorber
Click to expand...
Click to collapse
Hi All,
I am new to windows Mob interface and read several threads on how to install cooked roms.
I have 1.48 ROM on my HTC HD2 Leo and need to upgrade it to 1.66.
Can someone please guide me through in how to go about it or post the link (if i have missed any) of any thread that has the tutorial?
Most of the threads talk about flashing a cooked rom but i simply want 1.48 migrated to 1.66?
Any pointers be appreciated.
the process is the same for cooked or official.
is there an upgrade for your phone? you failed to mention is it provider locked?
1 - instal hspl2
2 - run the 1.66 .exe
3 - done.
if you have a provider locked phone, and have the correct update, you can skip step 1, if you have a rom unlocked phone (not network unlocked) then get the htc wwe 1.66 .exe and also skip step 1.
read the stikies for how to do it,. but really all you do is run the progs, press ok when it says.
Hey thanks Sam.
My phone is not SIM LOCKED, tht implies i need not install any HSPL/HSPL2.
All I need to do is ,
1. Download the 1.66 ROM
2. Active Sync my phone
3. Run the exe downloaded.
4. Hard Reset my phone.
Please correct me if i am wrong anywhere!
oops675 said:
Hey thanks Sam.
My phone is not SIM LOCKED, tht implies i need not install any HSPL/HSPL2.
Click to expand...
Click to collapse
It ony implies it, it doesn't confirm it.
sim lock and rom lock are unconnected.
If you sim unlocked it yourself, by buying/getting a code, then the rom is still provider locked.
If the phone came sim unlocked, then it is a good bet it is rom unlocked too.
All I need to do is ,
1. Download the 1.66 ROM
2. Active Sync my phone
3. Run the exe downloaded.
4. Hard Reset my phone.
Please correct me if i am wrong anywhere!
Click to expand...
Click to collapse
yep, thats right. Because you are flashing over usb, it wont affect the SPL, but it will change the radio, so if you want a different radio, you will need to do that afterwards.
Thanks for the info.
My phone was unlocked when it came and was not any provider locked.
All i am looking for is a higher ROM version. Wann try HTC Leo with 1.66 ROM.
Bingo.....
I have upgraded it to 1.66. Thanks for your help
Mods can close this thread if required
Hi there,
I want to update my O2 XDA Orbit 1 to AndreW82_WM6.1_21056_Lite_v1.4_WWE so that I can install Tom Tom 7.
I have never used a cooked rom before.
A lot of the articles I have read seem to have been superceded by newer developments and I am finding it hard to confirm the exact process.
From what I can gather, I should take out my SDHC card, run uspl1.11cmon and then use the rom updater app with the AndreW82_WM6.1_21056_Lite_v1.4_WWE rom.
Is this correct. Do I need to CID unlock first, or does the uspl1.11cmon cover this?
Thanks for your help.
Using uspl1.11cmon, CID unlock during the process
pof said:
This means you can flash ANY ROM to your Artemis after flashing USPL on it, no need to pay for CID unlock anymore!
Click to expand...
Click to collapse
Those having questions on flashing (i.e. updating) their HTC Artemis could try following these steps 1) Backup e.g. PIM Backup 2) disable standby and hibernation then remove SIM & SDHC cards 3) if necessary then cid unlock 4) recommend hard reset or update to the latest official build 5) if necessary Update SPL to latest 1.11.cmon 6) flash new rom then hard reset 7) put in SIM & SDHC cards and enjoy the result of the hard work by the developer
Also check out this thread Uspl/rom upgrade/tips&tricks
Cheers
Tom
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
CrazyTegger said:
I'm sick and tired of not having tethering or custom alerts, so I want to install a custom rom on my surround. I'm trying to downgrade my SPL to 1.52 so I can install HSPL, but I can't find a TELUS one anywhre.
The only one I have seen is Ansar's, but his links are dead. I can't post the links yet as i don't have 10 posts.
Does anyone know of where I can get the stock TELUS 1.52 SPL from, or where I can get Ansar's?
Thanks in advance!
Click to expand...
Click to collapse
http://dl.vmall.com/c0m2gktk1f
mcsc said:
I have two Telus Surrounds and I used this rom from Cingular to roll back the spl so that I could unlock it with DFT HSPL Version 3, and then you can load any custom rom you want. If you can't load the rom you might have to use the gold card with a memory stick.
http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
I tried that one but it said invalid vendor id. I assumed that was because I had a Telus phone and not a Cingular one.
I should mention that I'm running 7.8 with bootloader 4.22.2250.0(129185) and firmware 2250.21.40200.661
ofIIns and
jimmy110 said:
link
Click to expand...
Click to collapse
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
yup I have it
CrazyTegger said:
Great, now I can't even upgrade my phone using zune or cab sender anymore... I'm stuck on NODO.
Does anyone have the STOCK Telus ROM, and not the modified one like the one provided?
Click to expand...
Click to collapse
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
rob243 said:
I am uploading it now
Hold that thought...got a free file host that doesn't suck? if not PM me I will stick it on my private FTP
Click to expand...
Click to collapse
PM Sent.
CrazyTegger said:
I was successfully able to download and install the rom onto my phone. Now it's readying SPL 1.4.2250.2(113577) and then tried to install RSPL, but the phone would not reboot. I tried resetting the phone as some others indicated, but to no avail.
I then upgraded the phone to NODO using cab sender successfully and tried to RSPL, again the phone wouldn't reboot after completion.
Any ideas?
Click to expand...
Click to collapse
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
jimmy110 said:
Telus rom is a test rom
you flash telus just to take its touch driver and radio
then you flash default shipped rom (delete SPL_Signed.nbh from shipped rom to save the drivers you got from telus)
then you can go with spl tools
thnx
Click to expand...
Click to collapse
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
CrazyTegger said:
When you say Flash Default Shipped ROM, are you meaning the TELUS one, or the Cingular one?
I then update using RUU or GoldCard?
Click to expand...
Click to collapse
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
jimmy110 said:
The Default rom that you can name it shipped is Cingular
u use TELUS ROM when you have a trouble with touch driver ( like lock screen bug ) , or when u have trouble in call transmission driver ( making , reciving call problems )
note: u can't flash telus rom with goldcard method else you have a security unlocked bootloader !!
u can flash TELUS ROM with rom utility that come with it
after you take benefit of flashing telus, u cannot go with it, u have to return to Cingular one, note: delete SPL_signed.nbh from Cingular Rom to save drivers that u installed from TELUS, then you go with spl tools
sorry for my bad english
Click to expand...
Click to collapse
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
CrazyTegger said:
I don't quite understand. My phone was bought for, and is on the TELUS network. I had upgraded it to 7.8 using cab sender, but really wanted some features (Wifi Tethering, Custom Alerts), so I tried the custom ROM route.
The only thing I've been able to successfully install on it is the TELUS Test ROM, and upgrade it to NODO using Zune (Mango updates failed - I think because it wants a newer firmware, which I have the cab files, but they fail installing)
The Telus Test ROM that I had downloaded uses firmware 22.50.09.10402.661 and bootloader: 1.4.2250.2 (113577).
If I try to install RSPL/HSPL right now, the phone does not restart after completion, thus never gets into RSPL mode to do HSPL.
I recall trying to use RUU to put on Cingular ROM, however it always failed, I believe saying that Vendor ID is invalid.
I'm really frustrated with this, but I don't know how to move forward to install RSPL/HSPL.
Click to expand...
Click to collapse
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
jimmy110 said:
steps to solve all of your problem
cus your device originally on telus network , you cannot install Cingular while you have locked bootlooader
solution :
1- search in forums about , unlocking boot loder
2- unlock your bootloader ( you know that your bootloader is unlocked when u see on the top of your screen , "security unlocked" when you enter the boot screen (4 colored screen)
3- install Cingular ROM and you will succeed in that after u unlock your bootloader\
4- using spl tools now u can unlock spl to get HSPL
5- install cerebellum 7.8 ROM that will find all features enabled on it ( internet sharing , etc)
and you don't need zune update anymore
note: you will find it hard to unlock your bootloader but it worth try
search in other devices forums , all are same
Click to expand...
Click to collapse
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
CrazyTegger said:
I was under the impression that installing RSPL/HSPL was used to unlock the bootloader. Is this something different entirely?
Click to expand...
Click to collapse
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
jimmy110 said:
RSPL/HSPL is unlock bootloader not deeply enough to allow you to change the hole operator ROM , (change from telus to cingular)
you have to full unlock bootloader
Click to expand...
Click to collapse
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
CrazyTegger said:
Are there any good keywords I can use? unlock bootloader htc surround isn't working for me.
Click to expand...
Click to collapse
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
jimmy110 said:
search for unlock bootloader generally not for htc surround ( surround is poorest forum )
and all are the same way
Click to expand...
Click to collapse
I'm really not finding anything useful here... I see a lot for Android, but nothing for an HTC Windows Phone. Are you referring to an IMEI unlock? ChevronWP7? Unbranding? Interop Unlock? WP7 Root Tools?
Thanks
I've now managed to developer unlock my Surround. What's the next step from here?