I upgraded to wm2003 with yorch's kitchen, which went fine. When I tried running the imov messenger I cooked into the kitchen (v1.07e) and the wizard wouldn't let me continue past the first page...when you click the OK button it just went back to the script screen.
So I downloaded the latest version from the website (v1.13) and installed it over the rom version. It seemed to run fine, and the wizard went through to completion, and I logged on. But for some reason it automatically clears everything but the last thing said, meaning I can't read a whole conversation, just the last message, which means if I leave it on and someone sends me more than one message I miss all but the last one. The imov I was using before (in the special edition ROM) didn't do this, so I know this isn't normal.
This is driving me nuts...does anyone have any ideas? If I install a new rom without imov in it and install it fresh into storage (bah...my valuable RAM!) does anyone know if it the newer version works correctly?
Or is there a kitchen with a newer version of the imov software available?
Thanks for you time!
Hello everyone. I'm new to the website and I'm very interested in flashing my T-Mobile Wing. I just have a quick question for you guys. Is there anyway to go back to factory default, pretty much put in back to its original out of the box state if i flash the phone? Also, will i still be able to use the My Faves or does that have nothing to do with this? Thanks for all the help and i look forward to learning more about this.
Gigabit
Yes. You can download a T-Mobile Wing OEM RUU (search the forums for it) to get back to normal.
My Faves doesn't need the MyFaves app. I used MyFaves for about a year on my non-MyFaves Moto PEBL before getting the Wing. I just use Touch-IT 4.4 with the HTCHome plugin and just assign my myfaves numbers to the first 5 slots so 'simulate' the ease. I've always thought the MyFaves app was rather buggy, but there's a CAB floating around that you can install if you still want it. I just change my contacts via mytmobile online.
It's not too hard as long as you follow all the directions. Read them twice through if you have to.
thanks for the quick response. I just have one other question at this point. i've been look all over the place and cant seem to find what the newest version of Touch-It is. Can you please post a link to the newest version when every you have some time. I can't wait to get started.
Thanks!
Gig
These are the newest versions of Touch-IT.
NEW - Touch-IT v6.1.3 - Clean (updated with UC)
Touch-IT wm6.1 19199.1.0.0 - Full
Touch-IT wm6.1 19199.1.0.0 - ITsBlack
Touch-IT v4.4 and 4.41 WWE P4350
There was a small problem with the wm6.1 versions where the MMS wasn't working correctly, and I'm not sure if that has been fixed... but ITJE's roms are awesome and you can't go wrong with them.
You'll need to install my keyboard fix
KEYBOARD FIX for WING / HERALD & ROM hardware keyboard (keybddr.dll) mismatch
First off, Thank you so much for the fast responsces. Second, after a nice LONG day at the hospital with my daughter i sat down to start the flashing process. As i started reading some of the directions i saw something mentioned about Hard-SPL. My question to you guys is this: once i download the Touch version that i want, is that all i need? or do i need to look more into this and find Hard-SPL. please let me know whenever you have some time.
Thank You,
Gig
All you need to do is follow this link
http://forum.xda-developers.com/showthread.php?t=358225
HARDSPL is basically just flashing a rom.. so once youre done with it, all you have to do is install the Rom you want.
ok so, when i run Hard-SPL it starts to do its thing but stops at 4% and comes up with Update Error "Error 270". I've tried re-downloading the Hard-SPL file and uninstalled/reinstalled ActiveSync. I also installed all the .cab files in this order: canonyang, disablesecurity, asergpolicy, followed by a softrest. any ideas what the problem might be. Please let me know when you have some time. Thanks for all the help guys.
Gig
Try restoring back to the default ROM that comes from the factory by downloading it from the first post here:
http://forum.xda-developers.com/showthread.php?t=321717
After that then try flashing with hard-spl and then to the new TouchIt.
By the way I recommend
Touch-IT wm6.1 19199.1.0.0 - Full
I have a T-mobile wing and that one works best for me. (of course you will have to run the keyboard fix cab and x-box cab as indicated in the previous posts after installing Touch-IT wm6)
i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.
edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.
Thanks,
Gig
gigabit3 said:
i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.
edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.
Thanks,
Gig
Click to expand...
Click to collapse
Are you sure you ran the 3 cab files first (inside of the Wing with your stylus) and then did the softreset on your Wing (by pressing the little button on the side of your wing with the tip of your stylus) prior to running the ROM exe file (on your large desktop PC)?
The 3 cabs should be run in the order that is given.
yes, after i installed the 3 .cab files i did a soft reset. I held the camera button and pushed in the reset button with the stylus. then once i was in the screen with the different colors i ran Hard-SPL from my desktop computer.
edit:
after reading what i was typing i tried it again and it worked. just call me stupid. SOFT REST! those two words will hunt me forever. Thanks for all your help. not its time to start blowing crap up. lol
Thanks a bunch
Gig
If I remember the instructions, you're supposed to run the hardspl when the phone is running WM.... so basically, install the 3 cabs, reset, wait for it to reach your today screen... connect to activesync, then run hardspl.
that is correct sir. Thats how i was reading it but then doing it a different way. i dunno what i was thinking. Thank you so much for all your help. i have successfully installed Hard-SPL and Touch 4.4 full. I also over clocked from 201 to 247 with no issues. Applied your keyboard fix and the mms fix along with the Internet fix. all is working perfect. thanks again for all the help. i'll definitely will be browsing the sit more to see what else i can learn.
Thanks,
Gig
Hi
I am not able to install Isilo onto my Touch HD, very frustrating. I have tried both using CAB files directly on the phone, and also installing through activesync, but no luck. It gives the usual message on my PC saying the software is installed and to look on the mobile device for more instructions etc. But nothing happens on the Touch HD anyone got any suggestions?
Thanks
Bigmaz
I had a similar issue with Mobipocket - this seemed to be related to trying some of the earlier cooked ROMs and disappeared when I updated them. Have you tried one of the later ROMs?
I dont know anything about ROM's, what ROM should i be using?
Just looked on the HTC website and according to that ii have the most up to date ROM
Having seen several threads for the installation and use of messenger on the diamond and after trying several unsucessful methods of installing...
I have tried installing all versions of Messenger (for the diamond), without complete success so thought I would try my collections that I downloaded for the other HTC devices that I have had and owned.
The most succesfull and stable was the previously downloaded the PocketMSN_HTCz.cab from this site. (I have accidentilly deleted this file - However a quick search of google will probably provide links to the file!)
Installtion of the PocketMSN_HTCz.cab will provide a stable and sucesfful installation.
Have fun IM'ing
Found this link but not tried it yet.
http://rapidshare.com/files/70640443/PocketMSN_HTCz.cab
msn live messenger is not stable
i use Palringo (www.palringo.com)
This version was very stable in my phone, with many different ROMs.
The version PocketMSN_HTCz.cab is a really old version, the one i posted is a bit newer.
cannot get to work palgorino,i want to add user and password after i press ok it says cannot sign in!?!?
Enter a correct password
Anyway i have been messing for hours with msn and windows live and nothing worked untill I stopped using a proxyserver (start/settings/connections/connection set up my proxyserver, and uncheck proxyserver). After that, it worked perfectly. hope this helps someone.
got it working
It works for me on an original French ROM from Orange
Hi Guys, I'm wondering if anyone can help me. I've just upgraded my HD2 with the new 1.66 ROM released by Vodafone. I'm now re-installing everything I have bought from Windows MarketPlace. However, when I got to the MyApps area and click install, it starts to install really well until it gets to about 80% then just seems to stick there. I have left it for about 30mins and it still doesn't complete. It does seem to have installed but some of the apps don't run properly (File Explorer Pro wont run any CAB file)
Has anyone else had similar experiences or know of any solution
Many thanks for any help
Perhaps you should try installing one app at a time. I've had problems with Marketplace when I've tried to reinstall one or two apps in the past and it may be that it's getting stuck on one particular app.
cheers jakam, that was I was doing my friend....but it seems that it maybe a problem with the File Manager pro and Regedit. Everything else installs OK. Guess I'll have to try and sort it out
Cheers dude
No worries - glad you got it sorted.
If it helps, the app I was having trouble with eventually installed. I just had to keep trying every now and then until it worked