Problem
When installing the Syrius R0 ROM, the flash process got stuck at 17%.
Then the device gave me a ERROR 262 communication error and said there is need of a recovery process. After recovery, it's impossible to flash any ROM, it will stay at 0%, because of a RUUNBH error.
Solution
1°
First, you need to get the RUUNBH error solved. A simple method to do this is downloading this file and running the Romupdateutility.exe file in the RUU folder.
This will give an error, but don't worry. After doing so, you can boot your device.
2°
Then, if you want to install the Syrius R0 ROM, do what is mentioned under the 'How to install HARD-SPL!' section in this link.
Then:
STEP MANUALLY to bootloader. (Press and hold camera button and press reset)
You will see a tricolor screen on you PDA, and you have to see SPL-2.20.Olinex string. IF YOU NOT SEE THIS DO NOT TRY TO FLASH ROM!!!
Then execute the exe file that was in the Syrius R0 ROM that you downloaded and the process will surpass the 17% and the ROM will be fully installed.
I have inherited the Title "Noonski The Merciless"
Please Post to a thread already open with your issue,
For instance the rom thread you downloaded from or maybe the HARDSPL thread.
And in your case with a solution, this would belong in the WIKI.
Cheerz,
Related
my himalaya show "no gsm" on boot screen,
I can flash CE rom, but can not flash radio,
when flash radio , prompt "Error 114: Radio Rom Update error".
on bootloader screen,
working himalaya should show
1. "Radio version";
2. "protocal version";
3. "rom version"
mine show
1. blank;(this line disapearred)
2. "no gsm";
3. "rom version"
have done hard reset and switch between several roms, no use.
My bootloader is 1.03.
Please help me,
my himalaya can only running as PPC now, lost all wireless function.
So I want to Upgrade Bootloader, I download pnewbootloader and boot106.nB0 from this page:
http://buzzdev.net/viewtopic.php?f=8&t=21036
After I run
-=-==-=-=--=-=-=-=-=-=-=-=-=-=
pnewbootloader -f boot106.nB0
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I got:
"Do not run this tool unless :\n"
" - you want to downgrade your 5.17 bootloader to 5.15\n"
" - you have somehow managed to overwrite your bootloader and still\n"
" have a working ( ce bootable ) device, and still have the operating\n"
" system running\n"
"\n"
"If the above does not apply to you, press NO\n",
It seems that this pnewbootloader is wrote for xda1/wallaby, not for xda2/himalaya, since wallaby got bootloader version 5.15/5.17.
Anyway, I still click yes to continue.
-=-==-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
C:>pnewbootloader -f boot106.nb0
Copying C:itsutils.dll to WCE:windowsitsutils.dll
Unable to find flash info offset, cannot disable bootloader writeprotect
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-
It seems nothing happened,my himalaya is still running in windows.
I download the latest itsutilsbin-20090515,
extract pnewbootloader.exe and itsutils.dll to overwrite the previous one from http://buzzdev.net/viewtopic.php?f=8&t=21036.
The cursur of cmd line keep flicking and nothing happened.
my himalaya is still running in windows.Will it become brick after reset?
Thank you very much
I didnt have to upgrade the bootloader and mines 1.01
try to flash with a rom that upgrades the radio while upgrading the rom.
flyboyovyick2k9 said:
I didnt have to upgrade the bootloader and mines 1.01
try to flash with a rom that upgrades the radio while upgrading the rom.
Click to expand...
Click to collapse
do you mean the radio rom and ce rom are combined in 1 *.nBf file?
I have the official 1.72 wwe rom:
xda_ii_172181_final.exe,
The extracted files contain ms_.nbf, nk.nbf, Radio_.nbf,
The HimaUpgradeUt.exe try to upgrades the radio while upgrading the rom,
however, it prompt the same error "Error 114: Radio Rom Update error".
I check the RUULog.log,
It actually flash the 3 roms 1 by 1,
success in flash ms_.nbf, nk.nbf, but failed in flash the last Radio_.nbf.
Do you actually suggest 'merge' nk.nbf and Radio_.nbf into 1 *.nbf file to flash?
Thanks a lot!
try this rom!
C_ShekharWM5AKU3.5c.R40.P24_public
that upgrades rom and radio
two seperate nbf files nk.nbf and Radio_.nbf
Just run HimaUpgradeUt_noID.exe and it upgrades the rom then the radio
If you want that rom you said. Try flash this rom then flash your rom. It might change something and make the rom you want work.
Or it might be the rom you have is corrupt or damaged?
flyboy
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Mozart_TMO_CZ_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo
A. Pre-Requisites
If your Mozart is flashed with a ROM of the following releases:
1. RUU_Mozart_TMO_CZ_1.23.113.01_Radio_5.50.09.18_22.24.50.09U
2. RUU_Mozart_TMO_CZ_1.27.113.02_Radio_5.51.09.29_22.32.50.09U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your Mozart is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.113 i.e. with characteristic value 113
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Mozart_TMO_CZ_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Mozart_TMO_CZ_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing Mozart will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your Mozart will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
dead links
hello, links to ROMs are dead...please can you re-upload them? thx
lukas26 said:
hello, links to ROMs are dead...please can you re-upload them? thx
Click to expand...
Click to collapse
Hi,
I did recover of network maintenance, pros and will try to fix it
Regards, ansar
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NON NoDo unbranded ROM: RUU_Schubert_Cingular_US_1.54.531.02_Radio_5.66.09.09a_22.46.50.21U_Signed_by_ansar
It is suitable for chevronWP7 unlock and can be upgraded to 7008 and then to 7392 NoDo OS and keep unlocking
See my relevant thread: [Guide How To]Pass ChevronWP7 Unlocker from 7004 to 7392 NoDo via zune, by ansar
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following release:
1. RUU_Schubert_Cingular_US_3.03.502.02_Radio_5.66.09.09a_22.46.50.21U
then you can flash the following NON NoDo unbranded ROM and when you like you can comeback to your previous NoDo ROM
In case your HD 7 is flashed with a different of the above 1 ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.502 i.e. with characteristic value 502
then you can also flash the following NON NoDo unbranded ROM, but you can comeback only to the above 1 ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_Cingular_US_1.54.531.02_Radio_5.66.09.09a_22.46.50.21U_by_ansar
2. Download this zip ROM file: RUU_Schubert_Cingular_US_1.54.531.02_Radio_5.66.09.09a_22.46.50.21U_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Thank you, ansar.
Would you like to create a non-NoDo Europe ROM with latest radio? So ppl can unlock and then update to NoDo with latest radion.
hoaisonongame said:
Thank you, ansar.
Would you like to create a non-NoDo Europe ROM with latest radio? So ppl can unlock and then update to NoDo with latest radion.
Click to expand...
Click to collapse
Hi,
Not yet, but maybe will be possible, we will see ...
Thnx for commenting and supporting!!
Regards, ansar
bro
Thank you, ansar.
Bro_toyota said:
Thank you, ansar.
Click to expand...
Click to collapse
Hi,
Thnx for supporting!!
Regards, ansar
Hi, i can't update... it stays on 0% and then it shows me Error 260 which is Comm Error... but the usb is fine, and i tried in the 3 usb ports of my pc... so, what could it be?? thanks.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
EDIT: Now it shows error 262...
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
i upgraded it to 7392... does it have to do something with it??
ZeroCool11 said:
Hi, i can't update... it stays on 0% and then it shows me Error 260 which is Comm Error... but the usb is fine, and i tried in the 3 usb ports of my pc... so, what could it be?? thanks.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
EDIT: Now it shows error 262...
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
i upgraded it to 7392... does it have to do something with it??
Click to expand...
Click to collapse
Hi,
Do you start from tricolor screen in bootloader?
Regards, ansar
Thank you for this rom, great work!
For anyone wondering, if you have the HD7 S with AT&T, flash this rom, chevron unlock your phone, apply registry hack to keep phone unlocked, then update through zune to get back to NoDo
Hi,
I tried today to flash android to my HTC HD2 but it went wrong
I flashed the radio 2.08 HSPL and the phone started oke to windows.
But when I updated the rom to install magldr it said that it was successful but the phone stuck in the white screen with green HTC logo and did not show magldr or any thing else just the htc screen
Please help me to repair it and flash android.
When I press volume down en power button I get the 4 colors screen. I get this text on it:
PB1100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
PLEASE HELP ME
Use task29 to remove windows first
than flash your phone with HSPL4 to 2.08.HSPL
than update your radio to 2.15.50.14
install magldr1.13
Restart the phone go to USB massSTG
plug your phone to the pc.
Copy the rom.zip to the phone.
Go back to home page
Go to USB flasher and install from your pc CWM daf.exe.
Phone starts automaticly.
Go to AD recovery, install zip from SD, choose zip from SD, choose your rom choose YES when finished go back and reboot system now.
It should to be work
Good Luck
and for future reference please post in the correct section, Q&A NOT the dev section
Please check my signature and follow the details instruction. mskip wrote it very clear. if you still have problem please let me know,,,
stuiterbal187 said:
Use task29 to remove windows first
than flash your phone with HSPL4 to 2.08.HSPL
than update your radio to 2.15.50.14
install magldr1.13
Restart the phone go to USB massSTG
plug your phone to the pc.
Copy the rom.zip to the phone.
Go back to home page
Go to USB flasher and install from your pc CWM daf.exe.
Phone starts automaticly.
Go to AD recovery, install zip from SD, choose zip from SD, choose your rom choose YES when finished go back and reboot system now.
It should to be work
Good Luck
Click to expand...
Click to collapse
I did everything except updating the radio to 2.15.50.14... How can I do that?
Thnx
I flashed the radio to 2.15.50.14 I found here: http://forum.xda-developers.com/showthread.php?t=611787
I installed the recovery and it's working BUT it does not install ROMs The error is: Can't open the ROM
How can I solve this again
SOLVED. Look here: http://forum.xda-developers.com/showthread.php?p=16785804#post16785804
Hello, I'm Luis, and i'm newbie here i have bought about 4 months my streak.
Also installed one firewall for some programs don't use 3G connections and only use wifi. that firewall requires root acess.
By your tutorial in here http://forum.xda-developers.com/wiki/Dell_Streak/Flashing_Guide#Rooting_your_phone
and by your tutorial boot recovery mode http://forum.xda-developers.com/wik...g_Guide#Flashing_an_update.zip_with_streakmod
when i press to update from sd card, appears the follwing message:
"Press shutter button to start emergency recovery software"
"Warning: all data will be erase"
"Press volume up to turn off"
What you can tell me about second line "all data will be erase"?
Thanks
I'm betting I know what happened here. After flashing the custom recovery with fastboot, you let your phone reboot didn't you? If you are on a stock rom, flash a custom recovery, and let the phone reboot, the stock rom will rewrite the recovery with the stock recovery.
After flashing the custom recovery, pull the battery. Now replace the battery and power up while holding both volume buttons. When you choose option 2, it will boot into streakmod recovery, where you can flash the superuser.zip file.
Thought I should add:
After rooting, use a root enable file manager (search the market, there are lots of them. I prefer Root Explorer, but it is not free) to delete /system/etc/install-recovery.sh
Now, since you had to boot with your stock rom, your custom recovery is gone. But you can flash it again and it will stay.
hmm, but i never flash it. Its the original rom, only thing i have done, is OTA upgrade to Froyo..
how can i install a costum recovery?
sorry, but e never dit it before..
=== EDIT ===
you mean install StreakMod Recovery, don't you?
thanks
Welk if you havent flashed it, then thats your problem. You have to flash a custom recovery. And yes, I mean Streakmod. Read those tutorials. They will tell you what you need to know.
Sent from my Dell Streak using Tapatalk
Okay, i will try...
sorry, when they say: "Unzip and flash with: fastboot -i 0x413c flash recovery recovery.img"
Its suppose to do this from the phone (but in fastboot, there is olny numbers, no other leters or simbols), so its to do on the computer with usb cable plugged?
What software for flashboot?
thanks
There is a detailed tutorial at http://forum.xda-developers.com/wiki/Dell_Streak
Just go thru it. Make sure you read it again and again.
It is not from mobile. You have to connect your streak to PC. Switch that on by pressing the volume + - button and you get to see the driver installation.
You need to install the drivers first on PC.
Then you need to download the fastboot tools (above link contains all)
Open command prompt from fastboot file location
copy the rom/image (what ever you want to flash) to that location
Do the fastboot
I am not going in to detail as the wiki gives much better instructions !
Read... Read and Read !!!