Long Press End Key - Help Please - Touch Diamond, MDA Compact IV Themes and Apps

Hi All, I've just upgraded my Touch to a diamond and I'm now looking to make it a bit more useable for me.
I like the long press end key function and use it often - I find it slightly annoying though that I have to push it for about 3 seconds before anything happens.
Do any of you know a way to change the time needed to activate this? Ideally I would like it after a second or something.
Thanks for your help

If you use SPB Pocket plus you can then assign icon type shortcuts to the today screen.
Install pocket plus and then use it to assign a shortcut to program called " End Key" located in the windows directory.
After you have done this you can then just press this icon and everything happens in about 1 second rather than the 3 second wait.
Hope it helps

Related

Any way to rename a soft key?

I have just got my first Windows Mobile 5 Device, a MDA Vario. Its great, but Ive put Photo Contacts Pro on it, and changed the home screen soft key from contacts to Photocontactspro. Thing is, the app name is too long and gets cut off to "photo con"
Is there anyway to rename this softkey?
Thanks
You can do that in the registries:
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\112 - right key
HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\113 - left key
Values:
Default=Button label
Open=command
Cool, thanks
Hmmm
I wonder if you can help me.
I tried VITO ButtonManager and it has well and truly screwed up my softkey definitions for the Today Screen.
The right one seems to change what is does and the left one does not work at all.
I have disabled Button Manger but still cannot get the softkeys to work again.
How would I reset them to their original values?
Please bear in mind I have NEVER changed a registry key before?
Robin
Remapping SoftKeys
Robster, there is a complete incompatibility between our Wizard and VitoButtonMapper soft.
For interested people there is a specific soft to change Right and Left key applications (for instance, the right softkey is now launching TomTom instead of Contact).
Juste time to find where I may share this soft with you !
You could just follow the registry tweaks up top
It's not much more difficult from using Windows Explorer and notepad

HButton for smartphone

Hi,
I created HButton for smartphones. BUT I have no smartphone so I developed it on smartphone emulator.
I will be very gladly, if there is someone who can test it.
Please note: Test it on your own risk - never been run on real smartphone.
thanks
Hundera
Great! While I have no time to test it right now, I'll frontpage the news if it turns out to be working!
when i get to the assign window, i get stuck there, don't know what's the next step
oldsap said:
when i get to the assign window, i get stuck there, don't know what's the next step
Click to expand...
Click to collapse
Hi,
I created it little messy. It has to be changed before official release.
* Using * assign it to any HW button. I don't know if there will be name and icon of selected button or just something like "unknown 40C1".
* Create list of applciations
* Left and right button select preferred application​* enter to add it to list​* Press OK.
thats all. Now you should be able to start application using HButton....
What now?
I managed to do almost everything:
I assigned applications to the list of button1,
I clicked on '*', and so
Assigned to (*) displays "Unknown 40C1"
When I run the application Button1 manually, the application I chose for Button1 is run.
But what now? What do I have to press to make the application run? What is button1? I tried all buttons, pressing for various lengths of time, but I can't get it to run.
Do I need to edit the registry so that the application "Button1" is assigned to some button?
Hi,
at first thanks for help.
"Unknown 40C1" means - there are registry part about this button. In SPh, there's missing names of buttons - so name is unknown.
I has no SPh, only emulator. I checked registry and there is all ok - only names are missing. All flags and path to applications that should be started are similar to pocketpc.
These registry settings are altered by my program so HButton1 should be started by button with code "40C1". What button it is - I really don't know. That's what I need to test.
But as you describe it, it looks like that these settings are ignored.... So Where is settings of button's behavior on smartphone?!?!
ghostwheel said:
I managed to do almost everything:
I assigned applications to the list of button1,
I clicked on '*', and so
Assigned to (*) displays "Unknown 40C1"
When I run the application Button1 manually, the application I chose for Button1 is run.
But what now? What do I have to press to make the application run? What is button1? I tried all buttons, pressing for various lengths of time, but I can't get it to run.
Do I need to edit the registry so that the application "Button1" is assigned to some button?
Click to expand...
Click to collapse
not totally sure
I'm no expert in this.
If I understand correctly, one way to do it is through links in the \windows directory,
so
\windows\short_MSG
is a link to the program called when the message button is pressed
\windows\short_Camera, and short_IE
are for camera and explorer button.
But I think there are also other places to set these. And some phones allow long_MSG,IE,Camera links for long button press - not mine.
I tried to copy the Button1 link to short_MSG, and that managed to run the first command in the list for button1, but not the next on a longer press. (And it still launched the message program first, so there must be a second place that determines what is launched...)
Maybe people in the smartphone forum will have more info...
All this was on an s620 WM6.1
just a few more comments
Now that I can get HButton to partially run, I have a few comments:
I'm not exactly sure why, but going from HBSetup to configure buttons 1 and 2 takes a really long time. HButtonTask is much shorter. Maybe it is because a list of all programs is generated, and this takes time? In any case, maybe one could display a message "please wait..." - the first time I thought the program had crashed.
Pressing left (instead of right) when the bottom selector in HButton1 setup shows <None> crashes the program (ArgumentOutOfRangeException)
In HButtonTask setup there are two arrows below Custom delay (I think to chose the delay), but no number is displayed, and pressing left-right only toggles the boxes.
<Start Menu> doesn't work. <Clock>, <Toggle BT>, <Quit>, <Today> do work. <Back> behaves a bit differently than the Back key - it switches between tasks, instead of screens - but that's ok and can be useful!
In the HButton1/2 setup screens, I would change the left softkey to "save" instead of "ok". Too often I pressed that button instead of the center/enter button to change the action on the list. Because it takes ~10 seconds to enter the screen again, it is quite annoying....
Hi
I am really interested in this project if is still under developement

Touch screen broken

Hi,
Unfortunately I broke my touch screen. Most unfortunate thing is, my 'windows' and 'OK' button are remapped to work as right and left soft keys.
Now, I need to take backup of my SMS / mails. For this I want to open the 'programs'...
- Is there any way to open the 'Start' / 'Windows' menu by some other shortcut??
- Is it possible to 'open' the programs screen with some other shortcut?
- Is it possible to 'open' the file explorer with some other shortcut?
Thanks in advance
kumar00455 said:
Hi,
Unfortunately I broke my touch screen. Most unfortunate thing is, my 'windows' and 'OK' button are remapped to work as right and left soft keys.
Now, I need to take backup of my SMS / mails. For this I want to open the 'programs'...
- Is there any way to open the 'Start' / 'Windows' menu by some other shortcut??
- Is it possible to 'open' the programs screen with some other shortcut?
- Is it possible to 'open' the file explorer with some other shortcut?
Thanks in advance
Click to expand...
Click to collapse
try pocket controller
Install MyMobilier on you pc. I seem to recall it installing automatically with no user intervention. So this might work!
Thanks Anilkaparthi & afbcamaro...
Will defenitely try both
Tried 'Pocket Controler' and it worked like charm. Thanks
For some reasons MoMobiler site was blocked from @ my office network - so couldnt try from office. Will try it later
Must say i used to use mobiller and it made my BA run so slow, but if u cant use touch screen it is a fantastic program to use

New SMS link to home screen?

is there a way to do this, our maybe just a shortcut to the quick menu (same as the one that launches when you slide open Keypad. Or it would be nice to assign it a key via a good key map ap since the built in key map ap doesn't have settings for long press :-(
Suggestions any1?
Regards,
muzikfreakah
Hi
U can Use 'AE Button Plus' where U can assing a long press to eny button, or U can sinply remap one of your soft keys
shlomi.
Cool, ok thanks, I just thought there was a way to call the quick tasks which is already there in the phone, and launches when you slide out flip.
Will try AE.
Thanks!
Hi,
I was just about to post the same question. Is it possible to call up the "keyboard quick tasks" that you get when you slide open the phone as a hard button or a soft button (task or something).
Anyone know?
Hi
the task screen can be lunched by mapping one of your soft keys to windows\HTCActionScreen.exe , or u can copy a shortcut of this file to the windows\start menu\programs then u will be able to assign a hardware button to it.
shlomi.
I uses AEButtons, I assigned a button as LAUNCH A PROGRAM
Which options do I need of creating a new SMS ?
\windows\tmail.exe -service "SMS" -to ""
Thanks a million!
Thanks!!
Aside from AE is there another ap I can use to map? I want to map to a softkey? Instead of calendar I want to put that i also want to remap the contacts soft key to the "phone" menu.
Hi,
Try this: http://www.freewarepocketpc.net/ppc-download-remap-softkeys.html
It worked for me
This one might be even better for your newSMS shrtcut:
http://www.freewarepocketpc.net/ppc-download-keyswop-v0-2-1.html
for some reason, this doesnt work... i click on browse etc, and nothing happens...
Thanks guys, do any of these aps allow long press action as well atleast you get 4 actions on two buttons
Wish dual had more buttons really like the tytnII :-( I can even find button 2 and 3 which is specified on the buttons application wheer voice recorder and voice commander are mapped too :-(
By the way I got it to work with remap softkey, I used this one coz I am already like the HTC quicktask launcher
I got wisbar advance in the end... thats got a soft button app built into it... which works...
and i also got the htc action commander thing for new txt, new email etc...
hey thanks for the shortcut. one thing tho, the cursor goes to the body first anyway to get it in the "to:" field?
Right now im using Ultimate Launcher and have programmed some gesture action to work with HTC action

[APP][Updt 08/09/2009] DredSensor v1.3a - Allow you to personalize Hard Key Actions

=======================================================================================
DredSensor v1.3a:
=======================================================================================
Now DredSensor should be compatible with other device than HTC Touch Diamond.
Historically, if you have tried to play a game needing left and right key on an HTC Touch Diamond, you noticed that they are 2mm wide and if you click next to it, you get back to home page or to dialing menu etc...
So I've written a prog allowing you to lock these 4 keys actions and replace it by classical key event (VK_LEFT, VK_RIGHT, ...).
In that way you can play tetris, and use "Pick-Up" and "Hang-Up" keys for going left and right.
I extended it to let you configure each app independantly, and choose between four (five) mode:
"HardKeySimul": replace the 4 keyz by classical key event
"Launcher": allow you to quicklaunch 4 app (that you define in the config wnd) when you double tap (not click, just tap) on one of those 4 keyz
"Scroll": allow you to scroll the current window by tapping those 4 keyz panel
"KeySimul": allow you to send left/right/up/down events by tapping those 4 keyz panel
"--- Disabled ---": Disable specific HTC Touch Diamond Sensor functionalities.
Now, i've added an alternative Key Mapping, that let you map an action (or another key) on normal click and long click event on any other key that the up-described four.
So if you don't have an HTC Touch Diamond, the only mode you can choose is "--- Disabled ---" but you can define "other key mapping".
Link ->: DredSensor-v1.3a
To use it, you need:
1) A Windows Mobile SmartPhone
2) Install the .cab
3) Reboot your SmartPhone
4) Run a game (or app or ...)
5) Get your stylus out and back-in, in less than 1 second
6) Click "Yes"
----- A config window opens:
7) Choose the Type you want.
8) Reassign the actions to the events, if needed.
9) Assign "other key mapping", if needed.
10) Click "Ok"
Other Key Mapping:
To add a key mapping, a popup opens and ask you to press a key.
If you want to assign an action to normal clic, just clic on the choosen key.
If you want to assign an action to long clic, clic more thant 1 sec on the choosen key.
Then you have to choose the action, and it's done.
If you only assign an action to a long clic on a key, a short clic on this key should work transparently.
Have fun.
=======================================================================================
If you like this program, feel free to donate:
=======================================================================================
==========================================================================================
Version history:
==========================================================================================
New features in v1.3a:
=====================
Added an alternative key mapping that Should be compatible with any Windows Mobile device.
Added the "KeepAlive" option. Check this if you want DredSensor to prevent the smartphone to sleep when this application is loaded.
Added possibility to Enable/Disable DredSensor:
Exemple of C++ code to do this:
#define WM_DREDSENSOR_START WM_USER+22
#define WM_DREDSENSOR_STOP WM_USER+23
Disable:
HWND m_hDredSensorWnd=FindWindow(_T("DredSensorWnd"),NULL);
if(m_hDredSensorWnd!=NULL)
SendMessage(m_hDredSensorWnd,WM_DREDSENSOR_STOP,0,0);
Enable:
if(m_hDredSensorWnd!=NULL)
SendMessage(m_hDredSensorWnd,WM_DREDSENSOR_START,0,0);
New features in v1.2g:
=====================
Fixes a few bugs
Fix the bug in config window when loading prog list
Added a debug mode:
================
For activating it, just launch DredSensorDebug.exe (in /Program Files/DredSensor).
First it will tell you if DredSensor is running or not.
If it's running, it will activate/deactivate the debug mode so you will find a log in /Program Files/DredSensor/Log
If you have trouble with DredSensor:
Restart your HTC
Launch DredSensorDebug (to activate log)
Wait for DredSensor to stop working
Launch DredSensorDebug to know if it's still runing or not.
PM me the log, the config.ini and a description of the problem.
New features in v1.2b:
=====================
Tried to fix the conflicts with TouchLockPro and similar, hope it works (thanks for those who can check this out)
New features in v1.2:
=====================
Fix "not working bug" with new ROMs
Allow you to choose wether you block the scrolling wheel or not
Allow you to disable the vibrator effect.
Allow you to delete configs.
Tips:
=====
If you upgrade to this version, you can keep your config file.
To define a profile that applies on every applications, launch config tool and edit "Default" config.
If the key you want to affect is not listed, you can define it manually:
Type "Key:[email protected]@", with @@ = VKey code of the key you want to affect.
You can find VKey code list on : http://msdn.microsoft.com/en-us/library/bb431750.aspx
=======================================================================================
DredSensor v1.1d:
=======================================================================================
Link ->: DredSensor-v1.1d
New features in v1.1d:
=====================
Let you choose which Key/Action you affect to each key.
Launcher Mode let you affect an Action for:
Double Tap event
Click event
Long click event
An icon for config tool is created in Program list.
Cache Program List for quick loading in Config window.
Fixes a few bug from v1.1, v1.1b and v1.1c
Tips:
=====
If you upgrade to this version, your config file will be cleared (sorry ).
To define a profile that applies on every applications, launch config tool and edit "Default" config.
If the key you want to affect is not listed, you can define it manually:
Type "Key:[email protected]@", with @@ = VKey code of the key you want to affect.
You can find VKey code list on : http://msdn.microsoft.com/en-us/library/bb431750.aspx
Wonderfull!!
the app is working good for me now! I just love the scrolling with only a touch on the d-pad
Thank you!!
I suggest you stop making a new thread for every new version and instead update your original thread and post that you've updated it.
After installing and lunch program .... i cannot see any of EVENTS on Events tab. Windows "wait gif" is rolling all the time and nothing happen :/ (i talk about mapping under HardKeySimul
Kraize said:
I suggest you stop making a new thread for every new version and instead update your original thread and post that you've updated it.
Click to expand...
Click to collapse
That's what i wanted to do but i didn't found a way to update the post title...
Is there one?
thanx for the update I'll try it and report
Thanks for the new version! And thanks for adding the OK button command!
Seems to be working better than the last version although pressing the back key (which I have mapped to click right) a few times in quick succession does seem to send a back command. Pressing the home key in quick succession doesn't have this problem.
Also, I can't get the scroll wheel to work despite leaving the "Block scrolling wheel" box unchecked. Am I doing something wrong?
antlane said:
Thanks for the new version! And thanks for adding the OK button command!
Seems to be working better than the last version although pressing the back key (which I have mapped to click right) a few times in quick succession does seem to send a back command. Pressing the home key in quick succession doesn't have this problem.
Also, I can't get the scroll wheel to work despite leaving the "Block scrolling wheel" box unchecked. Am I doing something wrong?
Click to expand...
Click to collapse
Hmm.. For the scrolling wheel, i use a tricky solution that works on my HTC touch diamond. May be it doesn't work on your model or on your rom version...
If someone have an idea on how to send a "ZoomIn" or "ZoomOut" event to a window (or how to develop an application that catch ZoomIn and ZoomOut events), that would help a lot...
As far as i studied the problem, it seems that ZoomIn and ZoomOut events are equal to Up and Down keys, but comming from a "rocker" .. so I can send those Up/Down key events, but no idea of how to tell that this comes from a "rocker" (and i don't even have an idea of what a "rocker" is...)
Help?
Wow, this is great! I am still loving the ability to remap my home key (and the others), and I really like the new scroll wheel feature. Actually, for me, instead of zooming in some apps, it now seems to scroll just about everywhere -- which is perfect, I like that more anyway.
Is there any way to donate or buy you a cup of coffee? I'd like to as a thank-you.
What an absolutely brilliant program!
Thank you very much Dredger97!
Greeting
Slide
ldrn said:
Wow, this is great! I am still loving the ability to remap my home key (and the others), and I really like the new scroll wheel feature. Actually, for me, instead of zooming in some apps, it now seems to scroll just about everywhere -- which is perfect, I like that more anyway.
Is there any way to donate or buy you a cup of coffee? I'd like to as a thank-you.
Click to expand...
Click to collapse
Well if you insist , i've added a donate link in the first post...
Big thanks to all for your positive and constructive comments
TF3D and DredSensor don't play nice together
This program is awesome! You can do so much with it! However, I am having one small issue with it. It appears that if I use it on Manilla [TF3D], that it works initially, but over time it seems to stop working and ends up freezing Manilla. The start icon still works, all the unmapped hardware keys still work and the task bar is still live. Only Manilla is frozen. If I don't map any keys on Manilla, it works fine for hours. But it only takes about 1 or 2 hours before there is a freeze on Manilla.
Any thoughts on how to correct this? I would love to use this program from my Home screen on Manilla.
Long click event → vibrate/nomal
Hi,all!
i want "Long click event" of Endkey to set vibrate/nomal.
how edit setting?
sorry for my english!
thanks.
downloaded v1.2, opened resco picture viewer,Got stylus out and back-in, in less than 1 second, tapped yes.
than for type i choosed disabled, but nothing, every time i press any hw key it does what it need to do(home to home, back for back, hangup close..)
what am i doing wrong??
intel286 said:
downloaded v1.2, opened resco picture viewer,Got stylus out and back-in, in less than 1 second, tapped yes.
than for type i choosed disabled, but nothing, every time i press any hw key it does what it need to do(home to home, back for back, hangup close..)
what am i doing wrong??
Click to expand...
Click to collapse
Well, disabled means "DredSensor is disabled" so it's normal that your hw key do what it's supposed to.
If you want to disable the hard key, you can:
- set Type: Launcher
- set "Click" action = "Misc:Nothing" on one of the keys.
So it will catch the hard key action, and do nothing when you click on it.
For me it doesn`t work :/ windows "Wait" gif is always apperaing when i want to add new Event. :/ And there is no Events on the list ...
tried that but same when i press home it goes to home
i have tried that on wmp.
is this program always turned on,now when i remove and than get back in stylus no menu pops up?!?
Great Job!
the app finally works on my pda! so glad you solved this bug!
But I still have a little problem...the app runs fine, when I start the buttons work with the function that I chose, but after the first time I use it it crashes and stops to work. Am I the only one with this problem?
Thanks,
Michele
Dredger, I asked in the last thread, but didn't get a response.
As far as mapping other buttons goes, could you post a quick example of what I would type in the config.ini to map the center D-pad button to act as the "left" button.
I realize the buttons commands are listed in the link you provided in your first post, but I'm having a little bit of trouble figuring this out.
Thanks.
Great app btw.
I'm gonna have to have another go at this... For some reason I just can't wrap my head around the setup of the program.

Categories

Resources