I Need help my S200 is stuck at bootscreen and ActiveSync can't find it.
all help u can't offer is welcome.
! more thing when i plug it in windows makes a sound like it found it and a sec after the sound like it is disconnected.
Hard Reset diden't help. does someone have a sd boot for s200 that i can' unbrick it?
I found a fix here http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Problem: When i start boot modus, pc recognizes phone, but when i start the exe to flash, xda isn't recognized ?
Thx in advance
Finally I GOT IT .... YIHA XD
****ing PDAVIET PV_4.0.0.0.6_Touch
will never be flashed again
Related
Hi,
i installed that new Rom for my htc p3600, and it worked fine.. some minutes after that the screen went black.. i made a softrestart from that small button with the styles.. the trinity started, but stopped on the screen with : smart mobility... that black screen after the moving HTC logo... and nothing happend...
it is just stuck there..
after many restarts i thought i would re install the rom, but the pc can't see the device any more... the redlighted led is on when i plug the device to the pc, but still nothing happening..
the device is just stuck... doesn't go in to the system,, doesn't accept new instalation from the pc...
and all my work is stopped...
i have backup for my data, but i need to use my device.. please please.. help help help.. very fast..........
thank you..
Boot loader
i think may be it will help you if you get in BootLoader Mode ( by pressing the Camera Button and the Off Button )
then during the device in the boot loader mode try to connect it to your PC and try to flash another rom
GOD help you
What's your bootloader details?
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Your phone can be reflashed with Mtty even when it freeze on the boot screen cause its not necesary have the phone ON.
Tried to do a hard reset maybe is a windows registry problem.. after the hard reset the values on registry will be reset to default.
already done that, and doesnt work, even it reflashes through USB but afther reaching 100% the phone restarts and get stuck again in the same place, no matter if I hard Reset or reflash by USB the phone still get freeze.
can any one tell me how to delete all the data on the memory to make a clean reflash? or how do I reupload the firmware? is there a way to recover the phone?
remember I already install the WM5 and back to WM2003SE but after that the problem started, maybe i screw someting wile doing it?
Solaris_irc said:
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Click to expand...
Click to collapse
Tutorial for sd flash
Check here
Hello Guys,
i am getting crazy witch my ipaq. I downloaded the newest firmware for my uk ipaq. I startet the HP RUU and everything was ok, till my notebook chrashed during the firwmware update....
So my ipaq only hangs on the start screen. What can i do ? I`ve read here in this forum that someone started the SDLoader and the RUU found the ipaq and startet an new update. But i dont get it work, i tried it several times, but my computer doesnt recognize the ipaq ?! (In the Device Manager there is no new usb device)
The Ipaq shows after the SDLoader started: Update Error! Pls Check!
What i doing wrong ? I am getting crazy with this thing !!! Please help, or please can someone give me a tutorial for a noob (i am not one, but now i think i am...) ?
Big THX
P.S.: Sorry for my bad english, i am a portuguese man...
You can check this:
- connect ipaq (running, no matter what error on the screen) to pc, run hp upd utility, try to update
- run SD loader, and the same way - connect to pc, run hp upd
- try hard reset (?)
I hope one of this helps. If no, I have on idea besides hp service.
Regards,
Darek
How i can run the bootloader mode ?
Is this the same as the SD Loader Mode ?
Big THX
I got my baby back, YEAH !
I only flashed the Windows from this Page
http://4pda.ru/forum/index.php?showtopic=79455&st=120
and then Windows-Screen showed up. So then i could install the new firmware again and now everything is ok.
So possible this can help anybody if he bricked his 614c !!
Bye
Hi everybody,i'm using cingular 8125 and i have a problem.I installed new windows and the phone discharged.I charged it directly with oder charger because with normal charger or true pc it's not charging.Now when i turn on the phone i see htc logo and nothing else.I even don't see the ipl/spl/gsm/os info.Just htc logo and nothing more.
I tried to enter bootloader mode,but it don't connect to pc.
Please help if you can
can somebody help me?
Hi someoneee,
Please, let's clear your problem.
The phone discharged while flashing the new ROM, or after, while normally using?
What other charger you've used? Was it compatible?
Which ROM have you flashed?
Cheers
The phone discharged while normally using,after flashing.
I flashed CR96 Touch HD™ v6.5.0.3.3 RC5 rom.
I charged battery directly with wires from other battery.
I can turn on the phone,but he won't boot.It's just that htc logo from CR96 rom.
I used CR96 rom's for long time,but this is first time when i have this problem.
Man, I can't figure what went wrong with you...
Have you used SoftSPL or HardSPL? Don't worry, I'm just asking
And which system are you on? I've heard that Vista and 7 aren't that good for flashing...
If nothing helps you, search for topics about "Wizard Love ROM". Maybe that can help you.
Good luck man!
well i tried to hard reset my device when turning on,it's said that it completed,but it doesn't change anything.Well i use windows 7,but for flashing i use windows xp mode.
and yes i used softspl and hardspl
by the way,i can't flash anything,because when i turn on bootloader mode,it doesn't connect the device to the pc.I don't know what to do..
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken