I am trying to use Logictech Bluetooth mouse.
On my Acer laptop, it has Widcom/Broadcom Bluetooth stack.
Is it possible to load Broadcom bluetooth stack, their software allows more options like using a MAC address to add a bluetooth device (Logitech requires setting up via MAC address)
Any suggestions on how to set up using existing MS bluetooth software or installing/adding another bluetooth software application?
Dave
Related
I hope one of the gurus here can help me with this one:
- I have the O2 Exec, with MS BT stack
- I have the Logitech MX 5000 BT Laser Desktop (http://www.logitech.com/index.cfm/products/details/CA/EN,CRID=2158,CONTENTID=10776)
- this comes with a choice of the Widcomm stack(which they recommend), or you can use the MS BT stack
I have set up BT Activesync using the MS BT stack, without a hitch, but would like the extra goodies that the Widcomm stack offers.
What I want to know is:
- can I use the Logitech Widcomm stack (which requires that I disable the MS BT stack on my pc) and still set up Activesync with my Exec?
- Or, because the Exec uses MS BT, must I set up all peripherals to use MS BT to get them to communicate?
I have checked Logitech's support forum and done an extensive search here, but I can't find a definitive answer:
- if your HTC devices uses a particular BT stack, must you use that stack on your pc , as well?
Thanks in advance...
Huisie, you *should* be able to use any bluetooth stack on the desktop.
Just ansure that you have a incoming BT port set up, point Activesync to that incoming port, and set up a partnership.
Lekker, ou seun, dankie vir die help daarmee!
So, snorbaard, I can run the Widcomm or MS BT stack on the desktop, but I'm limited to the ...uh, limited...MS BT on the Exec.
Still, I believe that Widcomm doesn't do hands-free, is that right?
I am trying to setup my 8125 to syn with my PC. PC has a 1.1 dongle. When I pair to the pC only services I get are serial port and audio gateway. I am using sumiter2.3AKU Rom.
anyone? PPlease
Just a general plug for a website. If you ever want to check specs on a phone use www.phonescoop.com. According to them the 8125 has: Supported Profiles: HSP, HFP, DUN, OPP, HID, A2DP, AVRC
version 2.0. The serial profile is what will be used to make the connection between your phone and activesync.
When I connected them my Phone only showed Audio Gateway and serial link....while my pc showed networking and audio gateway. I have double checked and my OBEX file transfer is enabled on my phone but not registering with my computer. This Bluetooth dongle has worked awesome with all my other devices for file transfers. any ideas?
Are you trying to use activesync for the transfers or your bluetooth client?
Bluetooth Client
I'm not sure what Bluetooth stack you are using on your PC. I have the Widcomm stack (not sure what version). I have the OBEX profile and it shows up under the bt client software. However, I can only use the business card exchange and not a true file exchange. When I was using an older version of activesync I would initiate transfers to the device using bluetooth (push), but never tried a pull exchange. Is there something specific you are trying to accomplish? It is generally much easier and faster to use the mini SD or a USB method of exchanging files between two devices. BT is just dreadedly slow IMHO. I mostly use BT for A2DP and DUN.
I have the same problem, its not a problem in the PC stack, is the 8125 BT stack fault, lack of file bluetooth transfer OBEX, just imagine take the phone to another PC without activesync and you cant transfer files PC-8125, thats is the problem, i can do that with my rzr.
Maybe a BT stack upgrade?
I want to know what the supported bluetooth profiles are for the XPERIA X10. As far as I know from experience there is HSP (Headset Support Profile), A2DP (Advanced Audio Distribution Profile), and AVRCP (Audio/Video Remote Control Profile). But what about PAN (Personal Area Networking for bluetooth tethering), HID (Human Interface Device for using bluetooth keyboards), or SAP and PBAP (Sim and PhoneBook Access Profile)?
I've tried pairing my X10 with my desktop with stock Microsoft bluetooth drivers and my Sony VAIO laptop with Toshiba bluetooth drivers and neither shows anything! Is this a limitation of the phones hardware or android 1.6 software?
Does anyone know if this phone will support MAP for bluetooth? still looking for an android phone that will work in canada that has this bluetooth profile.
Need an android phone that fully works with sync
Same question here.
Has anyone tried this with ford sync and had text messaging work over bluetooth?
I just paired this with my Win7 x64 laptop running a Motorola BT 3.0 adapter, and I see the following services on the SGS2:
Headset Gateway
Object Push
Handsfree Gateway
BRCM Advanced Audio
AV Remote Control Target
PBAP Server
SIM Access
PnP Information
and I see an option to "Synchronize PIM Data with Phone Book Access".
I successfully paired my AT&T Galaxy S4 to my 64-bit Win7 laptop using the "Add a Device" button under Start -> Devices and Printers.
Now, in Device Manager, I have three devices with a yellow bang that appear as "Bluetooth Peripheral Device" under "Other devices."
I have seen in other threads that I should manually update the driver for these devices to the Microsoft Standard Serial over Bluetooth link driver that is part of the Windows Mobile Device Center application.
I'm just a little skeptical... does the S4 really have three serial-over-bluetooth links? And if so, now I'm curious... what do these links represent?
I am also having the same issue. I just updated the BT stack on the Dell with the same result. Under the Device Functions: two of the list are Bluetooth Peripheral Device / Other devices
The rest in the list are:
Bluetooth A2DP Source
Bluetooth AV Remote Control Target
Bluetooth Handsfree Audio Gateway
Bluetooth Message Access Profile Server
Bluetooth OPP
Shoot me
I spent over an hour with Samsung support. I finally got them to provide the following:
Bluetooth® Profiles: A2DP, AVRCP, GAVDP, GOEP, HFP, HID, HSP, MAP, OBEX, OPP, PAN, PBAP, SPP; NFC; Wi-Fi®; Wi-Fi® Hotspot; MHL support.
"Some of the profiles are related to car stereos and headsets by which windows may not be detecting all the profiles." - This is what is erroring out in Windows.
She could not give me the specific ones but it is two of the underlining profiles listed. I have spent way too much time to get nowhere.
Has anyone made any progress with this? I attempted the "Standard Serial over Bluetooth link" driver, with no luck.
Broadcom
Hi,
I had troubles installing my S4 on windows 7 using windows drivers.
I uninstalled all Bluetooth software then cleared device driver build-up with USB Deview.
I then installed Broadcom Device Drivers, and re-paired my phone with only one S4 BT device not installed.
These are all the S4 BT devices I got installed okay:
Bluetooth Hands-free Audio
Bluetooth L2CAP Interface
Bluetooth Remote Control
GATT Protocol
GAP Protocol
Bluetooth Headset AG
Bluetooth Hands-free AG
Bluetooth AV Remote-Control Target
Bluetooth AV Source
Bluetooth Network Access
Bluetooth Personal Area Network User (PANU)
Bluetooth OPP
Bluetooth Message Access
I hope this helps
S4 BT FTP Working
Hi again,
I've found that I can get the last uninstalled BT service mentioned above installed by using Bluetooth File Transfer -- namely the FTP service.
With BT turned off, using the BFT Widget: I activated "Bluetooth File Receiving Service (OPP) Port 12" and then the "Bluetooth File Sharing Service (FTP) Port 30", and then I turned BT on and re-paired with Windows. All BT services found on my S4 were installed.
My S4 appeared in Windows Explorer as a system folder under My Computer--with full upload/download capabilities--just as if I had connected via USB cable, though only the internal memory was available, not the SD card.
I hope this helps more so
:cyclops: