Related
Hi guys,
I've been playing with PIToday for a couple of days now but I noticed one thing: My bluetooth icon on the Today screen disappeard after using PIToday. The only way to get it back for me is unchecking PIToday and soft reset. This is a bummer!
I've been checking some sites for solutions but could only find the solution mentioned above and one solutions for a 3870. This was putting a shortcut to the bluetooth icon in the startup folder. In the case of a MDA II, there is no such shortcut possible. I checked the registry and Windows directory but the is no .exe file which will start the bluetooth icon. Only .dll. But I don't know where to point it to. :?:
Any other suggestions? Because I would like to buy PIToday but I still want to access my bluetooth from the Today screen.
Wouter
Even though I am a huge fan of Pocket Informant, i experienced a lot of issues with the PI today plug in and stopped using it. It may be incompatability with other software I also have installed but as well as the missing BT icon it also caused instability (lock ups) and the occassional auto soft reset.
In regard to the missing BT icon though PI today is not the only culprit. Users of Pocket Breeze from SBSH Mobile software have reported the same issue. Only way to restore it is unselect the today plug in and soft reset.
Ed
Hi Ednap,
Somebody suggested a sort of sulution for me: Using Zenphone. In Zenphone there is an option to turn bluetooth on and off in a profile. And it seems to work!
It is not the solutions but a least it is workable.
Wouter
hi,
some kind of solution
get the tool "No Plugins today" (h**p://www.ictinus.com/NoPluginsToday/)
install it (of coz)
insert into your registry a new string like this
HKEY_LOCAL_MASCHINE\init\LaunchXX where XX is the highest number of the Launch under INIT (I use "Launch90")
enter as the stringvalue the path to the tool e.g. "\Storage\NoToday\NoPluginsToday.exe" or whereever you have installed the tool
insert a link under \Windows\startup or \windows\autostart (depends of the language) and point it again to this tool. Rename the Link in such way, that it will run last (eg. "XXXNoToday")
ok, thats all, reset your device, and enjoy your Bluetooth icon
It is not a failure by any of the Today-Plugins, which make the icon vanish, it's just a timeout of the btdll, caused by Plugins, which need too much time to initialize itself, so the icon just nor appear.
What does this thing?
after reset it removes the todayscreens, the bluetooth icon appears, and after that the notoday-tool switches the plugins on again.
you need some more time (3-4 secs) after the reset, but, who cares, you got the icon back
my2cents
Dejan
Nice work, IvkovicD!
I'll give it a try and I'll post this solution also at the PIToday forum. I'm sure this solutions is a great help for Deje the maker of the program.
B.t.w I tried SnoopSoft Dash Today Advanced today to see if I like it. It is not bad. A bit slow but guess what happens?
My headset profile is now gone! First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter
To create a shortcut to Bluetooth copy the following into a shortcut file (text file with lnk extension i.e. Bluetooth.lnk):
34#\windows\ctlpnl.exe cplmain.cpl,23
and copy it across to your PPC
My headset profile is now gone!
Click to expand...
Click to collapse
Might it be that your profile is just gone from the Today screen? Check Settings>Personal Tab>Today>Items Tab and see if Profile is checked.
Hi Mark,
No. The headset profile was not there anymore in the list. I contacted Chris Scott, who makes DashToday and the only solution he had for now, was to uninstall the program.
Not realy a good option in my opinion.... Especialy because I just bought the program because there is no trial avaliable.
For your other solution:
I want to make sure that I realy understand. You want me to make a textfile and name it i.e Bluetooth.lnk. In this file there should be the line:
34#\windows\ctlpnl.exe cplmain.cpl,23
Then copy this file to my PPC and presumably to the startup directory?
Just want to make sure.
Thanks,
Wouter
Then copy this file to my PPC and presumably to the startup directory?
Click to expand...
Click to collapse
Copy it to the Start Menu folder. It won't bring back your bluetooth icon back but you will be able to access the settings from the start menu.
Thanks,
I give it a try later.
Wouter
wouterk said:
First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter
Click to expand...
Click to collapse
Hi,
I know this effect. I've have this "vanishing", too, if I install too much today- plug ins. Just grab your favourite registryeditor and delete some build-in today-registry entries for today items, e.g. original-task, or some of the other build in ones. If you need it (I don't believe that , make a backup, but really, do you need them?)
reset your device, the missing plugs should appear again...
Sometimes, the OS just do not display some today-plugins, if there are too much entries into registry, even, if you do not activate them...maybe at MS nobody thought that someone needs more then 5 todayplugs at once...
just joking
l8er
Dejan
Hi Dejan,
Sounds like an interesting solution. Want to give it a try but I can't find the path to the right regkeys. :?: Do you know were those keys are to be found?
Wouter
Hi Dejan,
I found the reg keys. (HKLM\Software\Microsoft\Today) and deleted the Task, Calendar and Owner Info keys. Then I did a soft reset but my Bluetooth icon didn't reappear.
Too bad.
Did it work for you?
Wouter
Shortcuts all have the same 'icon'.
Here's is what I did, I installed G-alarm and I get a following message after installing this app. "your device seems to be at risk to have the windows alarm bug". I told me to restart so I did.
Nothing weird happend after that but I didn't test the application.
I installed sprite backup after that and made a backup.
All went well and backup was made.
Now I was installing Western Europe maps for TomTom. The process was fine and when I unplugged the HTC from my PC for testing TomTom I saw that all my shortcuts changed in the same way. (shortcut icon blue outside, white inside)
And I tried the Icon but it didn't launch any program so ... I went towards the install dir from my appz and all normal .exe files where still working so something f**ked up my shortcuts.
I tried soft reset but when starting up the HTC i get much errors from application G-alarm.
Anyone knows my problem?
I removed all programs who'd give errors. Replaced all shortcuts also.
Seems to be working so far.
Anyone has an id where I can remove registery entries from uninstalled software?
Because some software didn't uninstall correctly.
Hi murda187,
how did u remove G Alaram ? I really hate to see G Alarm on my TP2 device, pls help me to get rid of it.
I have been getting that Error messgae everytime I try to uninstall. Tried all possible ways but it still reflects in installation directory.
I really appreciate your help.
Thanks,
murda187 said:
Anyone has an id where I can remove registery entries from uninstalled software? Because some software didn't uninstall correctly.
Click to expand...
Click to collapse
SK Tools can do the job quite well, as far as I have used it.
Hi there,
I've searched the forum but could not find this problem yet.
90% out of the time when I boot the sytem it does not start the touchflo software. I need to reboot it again after which it does start.
Any thoughts?
Thanks,
Cbx.
Same for me.. but for 50%.
I suspect S2U2 or maybe the SIM pincode form to make troubles with touchflo
Sounds weired but open the keyboard and type your pin in landscape mode. Don´t know why but it works
I have found this to work.
Put the device in Airplane Mode before you reboot. It works for me.
I have put an manila.exe shortcut on windows/startup folder.
Now all´s working fine.
By the way, this is a great piece of hardware.
Hmm,strange, never happened to me before, has been using more than 1 month now. Restart many times, and TouchFlo still start normal.
Maybe you have to many third party software installed :>
Same problem here.
Already posted in lots of threads around, looking for an answer. I even hardreset the device trying to isolate the problem. At first I thought it would be s2u2, but then I found that Max TTM places a "shake" program in the startup folder. After removing it, the device started loading TF3D fine (most of the time).
Since it happened again already once, my conclusion is that neither the shake program nor s2u2 are the true softwares to blame. I think it is something in my startup folder tho.
I had the same problem..
And i solved it, by uninstalling S2U2 I really like S2U2 but i had to uninstall this to get TF3D working directly.
This is what happened to me in detail:
1: Installed S2U2 > Reboot > TF3D Won't Boot
2: Reboot > TF3D Won't Boot
3: Reboot > TF3D Won't Boot
4: Reboot > TF3D Boots
Every 3 resets TF3D boots, otherwise nothing will happen.
When uninstalling S2U2 everything was fine.
ark666 said:
I have put an manila.exe shortcut on windows/startup folder.
Now all´s working fine.
By the way, this is a great piece of hardware.
Click to expand...
Click to collapse
Did that! Thanks! Solved the problem...
StealthNet said:
Did that! Thanks! Solved the problem...
Click to expand...
Click to collapse
Since I'm a total N00B, can someone tell me how I can do this?
I'm glad by the way that I am not the only one woth this problem
Thanks again
I've found that if I put my PIN fix in the Phone settings so you don't need to enter it anymore upon booting the phone TF3D always launches...
And must say, when I use shortcuts to reset the device it won't boot neither, but when I shut down the phone and start it again it starts...
Ok, I think I just spoke too early. I give up.
Already thought that S2U2 was causing the problem. Thought it was Max TTM... but thing is, after using the manila.exe shortcut, the clock doesn´t work anymore (it gets the time when it booted but stays there).
So, basically, add me to the ones that have this problem. Tbh, I guess I´ll just hardreset the phone right now. Argh!
Hiho and hello to everybody (1st Post )
I have the same problem but with my TP2 it helps disconecting the phone from the cabel. The last 20 resets TF is starting.
Hope this will help you.
Balu
since i installed MAX TTM i have this problem! even if i launch it from \windows\manila.exe...time doesnt work...
cbx_smtp said:
Since I'm a total N00B, can someone tell me how I can do this?
I'm glad by the way that I am not the only one woth this problem
Thanks again
Click to expand...
Click to collapse
In FileExplorer you tap and hold the manila.exe file in the \Windows folder. In the pop up menu you choose copy. Then move to the \Windows\StartUp folder and tap and hold in a blank spot. Choose paste shortcut in the pop up menu. That's it, or at least one way to do it.
I don't think manila.exe is a hidden systemfile, unless the entire \Windows folder is hidden. Then you will have go to options and tic the show hidden files.
Same thing with touchflo. It doesn´t work. Any modificaion causes problems with tf3.
The method with starting in flight modus works fine and another method with entering PIN with hardware-keyboard works too. I think there is a bug with PIN-keyboard and i hope it will be patched. Anyway i´ve heard win 6.5 coming soon as an oficial update and then... maybe this tf3 problem will not be relevant for us.
I hope it´s sounds english enough to understand it.
Same problem.
I solved deleting the cleartemp startup shotcurt on windows/startup.
How many of you guys/girls, have the 1% battery cab installed?
I have same problem , but before install the 1% battery cab.
Also have 1%Battery thing, but had the problem before.
I feel, that if I wait a few seconds before typing in the pin until all icons in the upper right corner are present, booting touchflo3d works fine.
Please try!
Hey guys,
Right now my Leo is unable to launch HTC sense after I did a soft-reset after modifying the registry "Change - CacheSize to 4096" gotten from the Leo Hints & Tips thread as well as uninstalling Nimbuzz.
Also I also created a shortcut for Task Manager to put into the start menu and added it to the Manilla shortcut at the main page.
A couple of soft-resets still doesn't solve it, and sometimes it will say tap here to start HTC Sense but tapping doesn't do anything. Able to open the dialing menu but takes quite awhile.
Pressing the contacts menu gives the error message "The file "contacts" cannot be opened. Either it is not signed with a trusted cert, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Any ideas?
Got the same problem.
Duttys HD Holy Grail
I tried to reinstall the rom but I can't connect with usb.
did you try that?
same problem here.
rom is 1.48 from stock.
also had the unable to launch sense error, couldnt find a way to solve it so i had to hard reset (AGAIN!!)
having to link 90 contacts with facebook manually sucks!
Does anyone have been able to solve this problem? I faced it today, I was doing some tweaks to my HD2, did some soft resets but then sudenlly it stops working, Sense freezes and has been unable to launch it, sometimes I can access to start menu but I can't load anthing, every link I tried to open tells me that the file cannot be opened either it's not signed or one of its components cannot be found. Nothing but the phone can be opened.
My rom is 1.48 stock.
Is the only solution for this a hard reset?
vhjc said:
Does anyone have been able to solve this problem? I faced it today, I was doing some tweaks to my HD2, did some soft resets but then sudenlly it stops working, Sense freezes and has been unable to launch it, sometimes I can access to start menu but I can't load anthing, every link I tried to open tells me that the file cannot be opened either it's not signed or one of its components cannot be found. Nothing but the phone can be opened.
My rom is 1.48 stock.
Is the only solution for this a hard reset?
Click to expand...
Click to collapse
I faced similar problem before if I added the tweak of FATFS=4096. I did "hard reset" and then reinstalled all stuffs. I reinstalled all programs and readded the tweaks except FATFS one. The phone resumes normal.
It seems to me that the tweak of FATFS may not work on HD2.
Yes, actually I managed to remove that tweak without hard reset it, reverted it to FATFS=0 and everything came back to normal, my HD2 is now like it was before.
We MUST warn every HD2 owner to not apply this tweak.
I've cautioned this particular tweak on the main thread before.
changing the FATFS would hanged the HD2 (ROM: 1.48 Asia Region) and you'll need to hard reset to revert to the default settings.
Ohhh I didn't see that...
Thanks calyon!
vhjc said:
Yes, actually I managed to remove that tweak without hard reset it, reverted it to FATFS=0 and everything came back to normal, my HD2 is now like it was before.
We MUST warn every HD2 owner to not apply this tweak.
Click to expand...
Click to collapse
HOw you do that?!
First I disabled HTC Sense from Home, then I move to the top of the start menu the registry editor (in my case it's SKTools Registry Explorer), then I turned it off and on several times and every time I tried to run the registry editor, when I was unable to run it I turned it off and on again, until I was able to run the registry editor, then navigated to HKEY_LOCAL_MACHINE\System\StorageManager\FATFS and changed back the FATFS to 0.
I don't know how many times I've had to turn it on and off, but I thinks it's better than do a hard reset, specially if you don't have a backup or your data.
vhjc said:
First I disabled HTC Sense from Home, then I move to the top of the start menu the registry editor (in my case it's SKTools Registry Explorer), then I turned it off and on several times and every time I tried to run the registry editor, when I was unable to run it I turned it off and on again, until I was able to run the registry editor, then navigated to HKEY_LOCAL_MACHINE\System\StorageManager\FATFS and changed back the FATFS to 0.
I don't know how many times I've had to turn it on and off, but I thinks it's better than do a hard reset, specially if you don't have a backup or your data.
Click to expand...
Click to collapse
I confirm... This is working!
(considering you have a reg editor already installed of course)
Thank you very much vhjc... you saved all of us lots of painfull time!
Hello,
I just changed the FATFS registry value to 4096 based on the tweaks hint & tips and now my HD2 hangs and couldn't launch the HTC Sense app. Reading the responses above, it seems that it's possible to disable HTC Sense from Today setting in this kind of condition. However no matter how I tried to click on the "Setting" icon on the Start Menu screen, I only got the error window saying that the program is missing and we need to restore or reinstall... I couldn't connect the device to my laptop thru activesync to remove the registry since the activesync app (the switcher between storage device & activesync window) failed to load as well...
Could you please share how did you manage to go to the Today setting window to disable the HTC Sense? I couldn't see any other options since no other shortcuts are available, nor I can run any app from the start menu Is there a way to load HD2 standard WinMo OS in safe mode only...?
I'm really desperate on this situation and as much as possible I don't wanna hard reset my HD2 since I haven't done any backup yet...
Please help... Thank you very much in advance!
cheers
Im getting the unable to launch htc sense message too, even after a hard reset the problem re-occurs. can anyone advise me what to do??
Sorry, should have mentioned this above, I have not changed the registry setting of fatfs to anything other than 0, so this is not whats causing this problem for me. I have tried using a reg editor ro confirm the setting is 0 still no luck.
before the problem occurs i get an error reporting message saying theres been a problem with manila.exe
Any help pleeeease....
conantroutman said:
Im getting the unable to launch htc sense message too, even after a hard reset the problem re-occurs. can anyone advise me what to do??
Click to expand...
Click to collapse
I have just encourntered the very same problem with HTC Sense - and I have not changed anything on my phone for days, if not weeks...
Anyone????
I have just encourntered the very same problem with HTC Sense - and I have not changed anything on my phone for days, if not weeks...
Click to expand...
Click to collapse
Me too. I wasn't even using the phone when I got an error reporting message about manilla. Several soft and 1 hard reset but sense still cannot load.
4braid said:
Me too. I wasn't even using the phone when I got an error reporting message about sense. Several soft and 1 hard reset but sense still cannot load.
Click to expand...
Click to collapse
Literally just in the last hour or so?
Something very odd is going on here...
The same happened to mine 2 hours ago. Didnt make any changes to the device or installed any software etc Tried soft resets but no joy
Im considering a hard reset unless someone has a fix please
Mine has done exactly the same thing!! was working fine earlier on the way home from work, went to check it about 6pm and it had locked saying a problem with Manilla.exe had occurred... couldn't get it to do anything so took out the battery and ever since HTC sense wont load..
Everything seems fine, al programs work, phone is ok etc just sense wont load, was just about to do a hard reset after backing up data and removing card when i read this post so stopped...
Has anyone else had this?....
I applied all of the stuff mentioned by royalbloodvi in another thread here:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
So anybody, that finds those tips useful enough for him, should go with those. My problem was, that even when I applied all of the stuff, phone was still laggy, had some SOD's, sometimes turned off by itself etc. Since there is still no official note from SE about MR2, I was desperately looking for an answer. Creation of X2 subforum made my search easier, after browsing some topics, I gathered all the info, and to make it easier for you, I exposed it in this topic.
All the credits go to the topic starters in here, once again, I just gathered and compiled the info:
Xperia X2: How to change language (re-flash an Stock Spanish ROM), dreamcrawler for translation and originating tips, gbajzelj for the final idea and ultrashot and lollylost100 that provided the X2 software cabs.
***********************************
Procedure:
1) Open SEUS (SonyEricsson Update Service), start a new update. EVEN IF IT SAYS YOU HAVE LATEST VERS, UPDATE IT ANYWAY.
Another version: click on Start/Settings/System/Clear phone memory, enter all the needed info. It will put phone back into original state (MR1 - since you updated your phone to that version)
2) ONCE IT REBOOTS, CALIBRATION SCREEN APPEARS. RIGHT AFTER CLICKING ON THE CROSSES, IT WILL APPEAR THE SONY ERICSSON LOGO, AND IT WILL START APPLYING THE CABS. PUSH THE RESET RIGHT after it starts applying (hidden behind the stilus, opening the battery cover).
3) After rebooting, the Sony Logo will appear again asking to retry. Press NO. Well by default this will keep on showing up every time you restart the phone, and it will also reset your time & date setting to some time in March. But I found a solution for that. With registry editor of your choice, search for Launch190 (HKLM\init\Launch190\CustAppInstaller.exe). Delete that value, and phone won't ask you again if you want to retry the CABS instalation, also it won't change your Time & Date setting again!!
IMPORTANT: After that, phone returns to original WIN 6.5.2 state, without BUGGY SE stuff. At that point, phone is usable, stable and fast. You will have about 220 MB of free space on your phone.
Now you can go further by installing some of the SE stuff, but this is all up to you, since I don't exactly know, which one causes the problems (except for SlideView and TileWave panel, as was stated in some other posts). Grab the X2 Program cab's here: R1BA023_Original_Cabs
Put the extracted cabs on your SD card, insert it into the phone, and install stuff you want. I installed those packages:
SEMCFlashDeployment.cab
SonyEricssonDialer_1.1.0.996_vulcan_generic.cab -> New Vulcan Dialer
TaskManagerSetup.cab -> Task Manager, obviously
Camera_R109_RC1_38986.cab -> necessary for Camera
CommManagerCab.cab -> Communication Manager
FastGPSSetup.cab -> without this GPS won't work, at least did not work in my case
JMMS_Ver4.5.113_26Feb10_SE_PPC.cab -> reminded by rsx19, this one is needed for MMS
After installation of those, restart the phone. At that point around 200 MB of storage space is left, and around 120 - 130 MB of ram left. Although, it is not necessary to install all of those cabs (except for Camera, which I think is needed, unless you don't want to use camera ), it is all up to you.
Also, since you requested, I'll put down some of the cabs that are needed for different settings. But keep in mind, I am not sure if anyone of those cabs make any troubles or instability. So If you find any trouble or instability after some cab was installed, let us know and together we might find some useful solution.
Ok, to install some of the aditional setting in Setting menu, first install MyCPLSetup.cab, as I discovered, this one is neccessary for following CABS for various settings:
MobileData.cab -> for mobile data settings (HSDPA, ..)
ClearStorage.cab -> installs Clean Phone Memory
PhoneSettings.cab -> updates the Phone in Settings/Personal
SetupSNM.cab -> installs new Sounds & Notifications under Settings/Personal..
For the Illumination to work, install those 2 cabs:
IlluminationSvc.cab
PatternsSetup.cab -> SE Illumination Patterns, don't forget to restart phone after you install those two, and go back to Sounds & Notifications to set the illumination for various events.
After you install those cabs (not necessary to install them all, it's up to you) restart the phone and options will show up in Settings or desired category.
Don't forget, when you finish with installation of cabs, do a restart / soft reset of the phone, since some changes may not show until a restart / soft reset is done!
Using the phone with Windows Default theme, it runs smooth. Also battery life so far seems to be improved, but will have to run it few more days to tell the difference.
So far, my phone is lightspeed fast and, which is more important - stable!! You can now also try to apply settings, royalbloodvi provided in this thread - maybe you get even better performance:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
Ok, some are still having problems with SD cards being unrecognized or disappearing, here is the patch: SD Card Fix
Accelerometer based rotation:
If you loose the rotation during the setup of CABS, and you still want to use it, this is how you turn it back on: with registry editor open (HKLM\Services\MultiService\mods\Rotation\AccelBasedRotationEnabled). If your rotation is gone, this key has the 0 value. Change it to 1 and you get your accel based rotation back. I have yet to find out, which cab disables it!
I'd like that you people give feedback in here, which CABs are safe and needed to install apart from those I (originally gbajzelj) posted.
PS
I personally don't like the idea of stripping the phone down to the bone to make it work. If you buy a new car, it works as it was send out of the factory..you don't need to unscrew half of the engine, disable the steering, take out the seets to make it work. Same is with computers, just everything. But until MR2 comes out and hopefully repairs all the damage that was done with MR1, this is the solution for me.
Also thanks to everyone helping to make this phone less bugy and somehow usable
lyteo said:
...
I also installed SPB Mobile Shell 3.5.3, which works flawlessly on this fresh install.
...
Click to expand...
Click to collapse
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
spasoft said:
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
Click to expand...
Click to collapse
Hm, I tried and my GPS was also unresponsive, so I installed FastGPS and it helped!
its gbajzelj not gbanzelj ) np.
When i installed spb 3.5.3 and reloded weather info then when i turned off the phone and turned it on again the weather data was not saved and the wireless or data conscction did connect but did not load no new data from weather server. Skyfire did load the pages (the connection i guess did work) but spb shell did not load the weather data anymore.
i would also like if anione can make the camera button to open the camera app withouth the slideview. maybe a simple cab file just to set the camera button.
Sorry for typo
Does it ask you every time you restart the phone if you want to continue with setup?
If it does, did you notice that it resets the date? Thats a problem I'm trying to solve now Every time my phone restarts, date is set to 17. March -> maybe thats why your weather data is not reloaded??
For me, when I press the Camera button it opens the CameraApp. I installed only Camera Cab as you sugested, no SlideView, and it works!
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
It think you have to install MobileData.cab & MyCPLSetup.cab
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
lyteo said:
Looking into your answer right now...remind me, in which menu that setting use to be, I forgot already...
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
Click to expand...
Click to collapse
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
royalbloodvi said:
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
Click to expand...
Click to collapse
About the Time & Date bug, I think every time the phone starts as after I made MR1 update...so we must somehow find what is telling the phone that the software is not installed (if we trick the phone that is was fully updated and will not ask for retry at startup, this date & time bug will probably go away) - solution found, check first post
About missing things in Settings, I think it is all connected with MyCPLSetup.cab solution found, check first post
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
rsx19 said:
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
Click to expand...
Click to collapse
You don't need to reinstall, just check the first post, I updated it with solution for that - you just have to change one registry setting!
For Sound & Notification settings install SetupSNM.cab! For the Optical I have yet to find out, I'm doing my best, but can't be that fast I guess I did about 10 reinstalls and about 100 restarts of the phone today
awesome, do you know which one is auto time update
rsx19 said:
awesome, do you know which one is auto time update
Click to expand...
Click to collapse
You mean the Timezone tab in Phone settings? When it automaticly changes time due to time zone change?
In this case it would be:
TimezoneSvcSetup.cab
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
rsx19 said:
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
Click to expand...
Click to collapse
Maybe you know where that Auto Time Update setting was? And if you restarted the phone, after installation?
For the Illumination, check first post
Thanks for the reminder on MMS, will add it now!
For the settingspart1 & 2, I have to check don't know yet
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
X2 phone Signal Pick up Weak
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
rsx19 said:
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
Click to expand...
Click to collapse
Did you went back to the Sounds & Notifications and selected vibration? Becouse at the moment, only cabs I have installed are:
MYCPLSetup, SetupSNM, IlluminatonSVC and PatternsSetup, and illumination & vibration works for me. Or do a soft reset again, it might help.
nguyennghiep said:
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
Click to expand...
Click to collapse
Hm, don't know what your are your signal conditions with other phones, mine has a good signal and it does not matter, what I install..
illuminations work and all the settings are set, but still no vibe.