Database Users

8125 died, now is acting strange. Red light shows charging, but isnt.?

2 days ago i had my cingular 8125 plugged into a charger . when i woke up it was off and dead, still plugged in?
now when i plug it in (to the stock charger) the red light comes on, but if i take the battery out, it stays on. if the battery is in, it is on. but i cant turn it on. ive left it for 15 hours now, and still nothing
even tried another battery.
when i first put the other battery in it turned on, was booting, but then died. probably cuz the battery was dead. but i had it plugged in as soon as i turned it on.
now the same thing happens.
any ideas?
i also thought i smelled something burnt. like if you have ever had a laptop that had a bad a/c connector and would heat up a bit, or even smoke!
dont know if it was my imagination or what?
thanks in advance
dan

T mobile MDA shows RED LED
that is strange that you post this today, because I just received T-mobile MDA unit from 3bay that has a similar problem.
-The phone does not turn on when I press the power button.
-It does not respond to a soft reset or a hard reset.
-With the battery in, I connect the AC charger to the phone and for about 1-3 seconds the charging LED color is RED. THe LED turns off and I can not get the same result if I reconnect the AC charger.
The only visible sign of life this MDA unit has is:
-with the battery out and the AC charger connected, when the USB is removed to the point where it is not connected to the MDA, the charging LED light flashes red for a split second and the screen flashes white for a split second as well. [I hope this is a sign that there's still life in this MDA, but i'm thinking my unit is truly a brick..]
From all the websites I've searched, this does not seem to be an issue, although for me it is a scary one! Anybody that can help would be much appreciated because I want a working MDA not a dead one
EDIT: It turns out my non-booting MDA was due to a faulty vibrator and flashlight MDA part. After removing these two pieces that are connected to the back cover of the MDA housing, the MDA booted up with no problem.

danrw84 said:
2 days ago i had my cingular 8125 plugged into a charger . when i woke up it was off and dead, still plugged in?
Click to expand...
Click to collapse
I'm in exactly the same position - left phone on charge overnight two days ago and in the morning it was completely dead. I have managed to get it to power on for about 2-3 seconds on one or two occasions but now it won't do a thing

Not sure if this will help, but have you tried to push that soft reset button that you have to to push with your stylus when it is plugged in?
Sounds stupid, but my power button is completely dead and I thats how I have to start mine up. I also have to pop out the SD card to get the screen to come out of sleep mode!
I might not work, but hey...worth a try.

Well, I eventually got back up and running. Turns out the battery was completely dead. I used the 9v battery trick and then used my USB charger to get the battery fully charged and all is well.
This leads me to query how do I now charge my phone when I don't have access to a PC? I was using a standard AC wall charger and the phone showed that it was charging but due to the fact that the display stays lit whilst on external power, this eventually killed the battery as the charge indicator appeared to be false.

*as posted verbatim in another thread*
WHAT IS THIS 9 VOLT TRICK YOU SPEAK OF?!?
funny...i'm having the same problem with 2, what were perfectly fine, wizards.
which is what brought me to this forum post.
These two devices were turned off and sat in my desk for months as they were not needed. They were perfectly good, successfully unlocked and upgraded from the advice/steps/tools provided here (thanks!). They were my primary personal and work devices until i was given the option to try a few iPAQs.
Now that I want to go back NEITHER device will boot. On the original chargers (both wall and usb) both devices will display the red light as shown in the pic above, will not boot normally, or via the 2 or 3 button methods common for these devices. The batteries do not get warm, which tells me that they are not getting current...which makes NO sense if i'm using 4 different stock charging options (2 wall and 2 usb) in different locations. One expect some variable would work to eliminate some oddity, but nothing is working.
something odd is going here. how can 2 perfectly good devices and charges suddenly crapout? I could really believe it's the battery, but one is grand spankin new (only used for a month)! Both have the main board die? Both not recognizable on any computer?
Is it possible that the backup battery is causing this? Can it me charged same as the standard if its drained? I know i'm grasping at straws here, but this odd a coincidence.

FOUND FIX
okay..this was too simple.
for some reason the USB will not provide enough"juice" to pop these out of their sleep.
I have been using this great little charging system made by good old Radio Shack that is a single plug with different adapters for all different devices...i've been using it for my iPAQ's, Blackjacks, BB's, ect. SO as a last resort i went and got the CORRECT adapter (as there are many mini usb adapters available) and SHAZAM!!! they boot right up!
don't ask me why the stock wall chargers will not work, but these RS iGo systems are the trick!
i'm going to link to the other similar issue in hopes any other folks having the same issue can benefit from this.

X2 Charging problem

So the phone was really low, at 6% this morning. SO I put it on the wall charger. I saw the icon come up that it was charging and then put the phone down.
A while later I went back to the phone and saw that although the charger was plugged in to the wall and also plugged into the phone, it was NOT charging.
Using the phone I went to my contacts to check a phone number and then it turned off, due to no charge.
I plug it into the wall charger, the USB connected to the computer, as well as the car charger and here is what happens:
The top and bottom of the phone blink red for about 1-3 minutes.
Without pressing anything on the phone it automatically turns itself on, I see the Sony Ericsson boot screen, the Windows boot screen then my SPB Mobil Shell screen for about a second and then it turns off again showing and the blinking red light for about 1-3 minutes and then it starts the process all over again.
I think that a setting for Backlight/Power management was changed. As setting similar to "Only charge with usb", or "only charge when connected with ActiveSync" or somthing like that.
The problem is that I turned off the Active sync on the phone in order to conserve battery power so that I could look up the phone number from my contacts. And after I did that the phone shut off and I cannot change it, because it will not charge.
I do not have a different, charged, battery to try and do not think that I can find one easily.
Any suggestions?

Now when I see that the phone is re-booting(I see the SE logo), I use the stylus to to soft reset. It is obvious that there is some type of charge happening before it re-boots, , otherwise it would not re-boot. SO my theory is that by doing a soft rest between restarts, the battery will gain more of a charge each time. And possibly have enough of a charge so that I can go into my settings and see the backlight/ power settings have been changed.

So I took a battery from my old SE 902 phone and rigged it to work with my X2.
It booted up just fine. I was able to get into the menu for power settings. Nothig was changed however I did check the box "do not charge when connected to the computer" backed out of that screen and then went back into the screen and unchecked the box.
I powered down the phone and the screen went to the default charging battery meter.
I then put the proper battery in the phone and it was still blinking red. I saw it blink green for a few seconds, then I felt it vibrate, and then I saw the green battery meter. But after a few seconds it went back to blinking red and I could not see the battery meter again.
This seems to be happening intermittenly. As of right now there is a green blinking light and I see a dimmed battery meter.
Hopefully it will be fine, we shall see.

So it was charging for a while and now has stopped. I see the battery meeter, but there is no green bar moving up. and the light has stopped blinking.
I unplugged the usb and I still see the battery meter with no green bar moving. Installed the back cover and plugged the usb back in.
Now it is back to the red blinking again. . . ? ? ? ? ?

I think that it is a battery issue.
CAn anyone suggest why a battery would all of a sudden stop working?

Just ordered a new battery. $70.00!!! Ouch!!!
It does come with a battery charger for use with a Mini USB, but still, $70.00 is a lot of money!!
I will update with the results after i charge it up.

I got the new battery and put it into the charger. As I mentioned in an earlier post the new battery came with a separate charger for use with a mini usb. At first I had problems. The charger would not charge the new battery. I was using a wall connected mini usb to power the charger. So I went to the computer and tried the mini usb from there. It still would not charge. So I took the battery out of the charger and put it into then phone and went back to the wall charger and it was charging. I could feel the phone vibrate and then saw the battery meter slowly fill with green and back to empty and then fill green again.
So I decided to do a few other chores around the house and went to check the charging status after about 10 minutes. I noticed that the phone was on!! I did not turn the phone on. No one else was in the house to turn it on. It was just on. Weird.
So I took the battery out of the phone and decided to try the new charger again with the computer mini USB. It WAS charging this time!! I charged the new battery on this charger using the computer mini USB until the red light(charging) turned green (finished charging) and then put it in the phone. It works fine.
I then decided to put the defective battery into this charger and it was actually charging!! I left it overnight and it was green this morning: identifying it as a full charge.
When the new battery is down to 10% or less I will take it out and put the defective battery in and see what happens.

So I put the original battery back in after the green light came on identifying a full charge on the accessory charger.
It showed 1% and a message came up identifying that "the battery is low, please charge asap", something like that.
So, in my unprofessional opinion , the original battery is toast.
The new battery worked great after its initial charge using the included accessory charger.
When I decided to charge it using the phone itself with the wall charger I noticed some really weird things happening.
First of all you should know that I downloaded and installed Spoon Charge. Look it up here on the forums, free and works great. It basically tells you what charge level you have, temperature of the battery, what voltage is coming in to charge it and also type of charge the battery is doing: trickle, fast, very fast and on battery.You can set it to read reading at specific time intervals: I have it set to read at every second.
I noticed that the charge kept bouncing between very fast and trickle. At one point it went to on battery, then to trickle then to on battery then to fast.
Ok. Weird. . . I thought to myself.
So I let it continue to charge overnight.
The next day I "tried" to use the phone. it was as slow as it was at it's factory installed settings before I did the memory card fix, accelerator settings, and other fixes that I forgot now have forgotten that I have installed.
At this point I decided to drain the battery as fast as I could by turning on WiFi, Bluetooth, and play a movie at the loudest volume possible. As soon as it reached 10% I took the battery out and charged it with the accessory charger. The next morning I saw that the indicator light was green showing full charge and installed the battery in the phone. It booted up and I immediately received a message that the battery was low, saw 1%.
Knowing that this was a BRAND NEW BATTERY, I turned off the phone and took the battery out and waited a few seconds until I put it back in and rebooted the phone.
This time it said 86% charge!!!!!!
WTF!!!!
So I tried to use the phone and it was as sluggish as before. After about 25 minutes it was starting to be a bit faster but nothing like it was before.
I am really confused now. Since I have a new battery I have ruled out that as a problem. So now is it the phone itself? Could it be the wall charger that is faulty?
Any other suggestions would be greatly appreciated.

Another update.
I put the original battery in the phone and now it works!!!! The old battery that would not charge now charges and works!!!
The phone is not the same. Still really slow, can't get it out of the "LOCKED" position when I want to answer a phone call. Opera is sliggish then fast then sluggish. Not what I had the phone at before all of this started. It actually WAS stable. It WAS useable. Now I want to throw it into the drink!!!!!!
Not sure what to think anymore.

well bro go into the system help of ur mobile press as i say
2ce the end button one time call button, 2ce the end button one time call button,one time end button and u will find the problem it is in the charging port the same issue with me

[Q] Nexus 4 won't charge anymore

Hey,
I've a 8 month old Nexus 4 with which I've been having a great deal of bad luck with. Dropped it around New Years and shattered the front screen + digitalizer, cracked the back twice, had a battery problem causing it not to reach my mobile network and would automatically shut off at 40-50% battery and when I managed to turn it back on, it would be at 1-5%. I guessed it was a battery failure and bought a new battery about 3 weeks ago and everything was fine. Last night, I managed to drop it again from a height of about 1.5 feet and while nothing outwardly happened, it now refuses to charge. The battery icon shows its charging but there is no lock screen text and in the notifications bar it shows the battery icon with a lightining bolt but underneath it is still doesn't say charging. In the battery status screen, it shows on battery and the graph has no charging lines even though it has been on charge the whole night. I cleaned the micro usb port, I restarted it, I used different cables and power sources. Nothing helped. Also I think its unlikely to be a software issue as I didn't add anything new. Please help and thank you !
- Prithvi

maybe worth to try reconnect battery inside phone ?

saturine said:
Hey,
I've a 8 month old Nexus 4 with which I've been having a great deal of bad luck with. Dropped it around New Years and shattered the front screen + digitalizer, cracked the back twice, had a battery problem causing it not to reach my mobile network and would automatically shut off at 40-50% battery and when I managed to turn it back on, it would be at 1-5%. I guessed it was a battery failure and bought a new battery about 3 weeks ago and everything was fine. Last night, I managed to drop it again from a height of about 1.5 feet and while nothing outwardly happened, it now refuses to charge. The battery icon shows its charging but there is no lock screen text and in the notifications bar it shows the battery icon with a lightining bolt but underneath it is still doesn't say charging. In the battery status screen, it shows on battery and the graph has no charging lines even though it has been on charge the whole night. I cleaned the micro usb port, I restarted it, I used different cables and power sources. Nothing helped. Also I think its unlikely to be a software issue as I didn't add anything new. Please help and thank you !
- Prithvi
Click to expand...
Click to collapse
I think you answered your own question there If after all that, your phone still wants to work for you... you could try getting hold of a Qi charger.
This works by induction, through the back of the phone - not through the mini-USB port. If it won't charge your phone, you will still be able to use it on your next phone, since wireless charging is becoming more and more popular.

Try to clean the usb port and change charger

BATTERY (?) Help

Hi Guys, so I flashed Resurrection Remix and it was working fine. Few days later, I woke up to my phone continuously vibrating. Upon checking I saw that it was vibrating because it was doing a boot loop. Unfortunately my PC was broken at the time too, tough week.
Anyway, I let it do it's thing until it runs out of power. It never did. Seriously I waited for a day. When I slept, it had 20% battery (not charging). So I thought maybe, the power button is acting up again which has happened many many times before.
So I opened up my phone and adjusted the power button. Even, holding the volume up while plugging in didnt work anymore.
While I was there I saw the battery connector thingy, I unplugged it and re plugged it real quick without breaking anything. And It restarted and the device worked fine.
But.... The battery icon is steadily at 50% for a min then drops to 0% even while connected to charger. So, I charged it for a few minutes but it doesn't move.
I was about to do a factory reset but it shut down. The battery icon doesn't appear, only the red blinking led light. I tried charging it like that overnight to no avail.
I then tried to remove the battery connector again and as soon as I plug it, the screen turns on then off again. Sometimes it gets to the battery charging icon before it shuts down. If I bend the connector downwards it sometimes turns the screen on and sometimes doesnt.
I took it to repair shops and they said that the problem is the battery and ofc to no suprise, they dont have a replacement.
Do you guys have any idea what happened? Was it a button issue, software issue or indeed battery issue. Before all this happened, the device was working perfectly.
Please help. I miss my phone already.

I think it due socket of battery, can you open the back cover and plugout and plugin this socket, will be OK

Charging error.

Hey all.
First off, I'm running RR N from over a year now.
Everything was fine until now. The problem is that when I connect my charger to the phone it's not getting recognised. That is, it's not showing that it's charging in the ROM.
Like, initially when I plug it'll not show anything but when I restart the phone (with the cable still untouched) and it boots into the home screen it shows charging.
Absolutely strange. ??*♂
Now, after a few days it's not getting recognised even in my PC. And also, now even after it boots to home screen it won't show 'charging' but the batter percentage will increase over time.
Any ideas?