Database Users

Streaming Video client on VPA IV ?

Hello,
on the VPA IV from Vodafone (at least on some of them ?) there is a separate streaming video client with version number 1.0 and manufactured by HTC.
I heard that this client can show live streams with extensions .sdp.
Now I suppose this is the „Session Description Protocol“ described in RFC 2327.
Does this client handle mor formats than the TCPMP freeware client ?
Does it handle them in a better way ? Any experiences ?
Is the software residing as .cab in the extended ROM of the VPA IV ?
Is it available separately or has anyone (if possible at all) extracted it as .cab ?

I have a vpa4/Vodafone v1640, and there is no streaming mmedia player on it, my device is not even logging onto their 3g network.

heliosfa said:
I have a vpa4/Vodafone v1640, and there is no streaming mmedia player on it, my device is not even logging onto their 3g network.
Click to expand...
Click to collapse
Aha, strange.
I saw it with my eyes, believe me.
On my (generic and unlocked) Qtek 9000 there is also no such client, neither was anything on a CDROM that came with it.
With the exception of one program this CDROM was pretty empty :-(

yup, and pv player can't stream it, gives error of "clip is corrupt".
I'm going to be calling vodafone again tomorrow to find out if thgey have an avaliable media player....

There is something like that streaming thing in t-mobile MDA PRO.
But since I flashed mine with another ROM the same day I got it I am not 100% positive

There is something like that streaming thing in t-mobile MDA PRO.
But since I flashed mine with another ROM the same day I got it I am not 100% positive

CONFIRMED - see attached Image!
VPA IV from austrian provider A1, branding by Vodafone.
Don't know what to play with this client by now, have not found a streaming server yet.
=) Georg

That client doesn't work with Vodafone Live either, i've tried
And, ironically, C4 streaming on voda live does work, but nothing else.

O2 Plus can work on WM5.0 PDA

Tested on my 818pro and working well. But little bit slow. My friend use Wizard also work fine.
Extract the file, you have 2 cab file.
The first one with name 1_o2p202200106_wm5s.cab
The second one with name 2_O2Plus.v2.0.Patch.cab
Copy those 2 files to your device.
1. Run the first one, do not soft reset
2. then install the second one
3. Soft reset
Enjoy

what does exactly o2PLUS include (is it their SMS plus or dialling thing or what?) In case it is say SMS, does it REPLACE original apps?

too bad it isn't vga

Can you upload the other stuff also :
O2 SMS Plus ,O2 MediaPlus ,O2 Setup Wizard,O2 Self Diagnostic ,FM Radio ?
Rain

SMSPlus has been posted here before. Here:

'O2 Plus can work on WM5.0 PDA' can someone tell me what this program is for and how good is it?

Is the o2 Active User Interface asian version...o2 AUI is slowing the device but this o2 Plus is something that is ... just something that i wouldn't want on my device ... poor design too much space ocuppied on the screen (not to talk about the flickering) not very intuitive ... and not to be modest but even a rookie can make this plugins in max a week.
This is my first impression on o2 XDA Exec running on latest WWE RUU.
I'm only interested in the other apps of the package related to radio,music player , equalizer - they look nice in the snapshot on their seeo2 website.

More O2 Plus Information
Here is more information on 02 Plus.
http://pdaphonehome.com/forums/showthread.php?p=525304#post525304
and
http://www.seeo2.com/product/XdaAtom/template/O2Plusv2_2005.vm
I would love to find the O2 Media Plus. Anyone have that?

O2 Phone Plus
Does any one manage to get the O2 Phone Plus working on the 818 pro

Cyberon Voice Commander 1.6 for Other Devices!

I found a copy of Cyberon Voice Commander 1.6 (not the crappy Voice Speed Dial) here and tried to run it on my Verizon XV6700. Not only did it mess up the hardware button configuration on my device - the program wouldn't run, saying that it's not supported on my device.
In looking further, I found out that the main executable was looking for the hardware ID string PU10 (for the Universal). I changed it to PA10A1, which is the ID for my XV6700 (Sprint users may be slightly different, I don't know), used the SignCode program here to re-sign the modified application, and it worked fine on my XV6700!
I found out that the HKLM\SOFTWARE\OEM\VoiceCommand registry key was the reason my hardware button mapping was getting all screwy. I removed that registry entry, modified the VCStatic.INI file's HotKey entry, and the button assignment is working fine now. I just have to manually assign the Record button (or whatever you want) to "Voice Commander."
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-xv6700-usa.CAB
As I understand it, Sprint users with the new ROM update might have Voice Commander already embedded. I just thought I might give an alternative to Microsoft Voice Command and to Verizon XV6700 users who are still... waiting for their corresponding ROM update.

Do you think you would be able to modify this file to work on the 8125? I wouldn't mind "compensating" you in any way I can (I can offer some web hosting if you would like some).

Can you tell me what the model number is of the Cingular 8125?
For instance, the Universal was PU10, while the Apache was PA10A1. The program looks for that particular model number.

The model number is WIZA100

And for my Qtek 9100 ?
The model number is WIZA200
Thanks !

Not trying to push but my trial for Microsoft Voice Commander was up today and I want to know if I I should really spend the $50.00 or if this will work for what I need it to do.
Any news on the program?

I have a 6700 and have no issues running the microsoft voice command 1.5 with many bluetooth earpeaces. You need to install the following http://forum.xda-developers.com/download.php?id=7396 and then modify the registry. Take a look at the registry key HKLM\software\OEM\voicecommand and there is a subkey you can change from sddialer.exe to \program files\voice command\voicecmd.exe
Thats it. When you press on your bluetooth headset button you will hear the microsoft voice command chime. It works for me and it will work for you.
Mike

Voice Commander is now available for Wizard 100/200 and Treo 700w owners!
For Cingular 8125 and Wizard 100-based devices:
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-wiza100-usa.CAB
For K-JAM, Qtek 9100, MDA Vario, XDA Mini S, and other Wizard 200-based devices:
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-wiza200-usa.CAB
For Treo 700w owners:
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-treo700w-usa.CAB
Settings dialog boxes have been modified for 240x240 screens in this version.
Enjoy it!

BeyondtheTech said:
Voice Commander is now available for Wizard 100/200 and Treo 700w owners!
For Cingular 8125 and Wizard 100-based devices:
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-wiza100-usa.CAB
For K-JAM, Qtek 9100, MDA Vario, XDA Mini S, and other Wizard 200-based devices:
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-wiza200-usa.CAB
For Treo 700w owners:
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-treo700w-usa.CAB
Settings dialog boxes have been modified for 240x240 screens in this version.
Enjoy it!
Click to expand...
Click to collapse
Thanks for creating these BTT. Would you mind if at some point I integrate the wiz100 version into a custom ROM for the 8125?

Bluetooth Headset Problem
I have done that to my 8125 however it didn't work. I still have the same issue with BT not working until a reset.
Here is something I tried that is working for me...
http://forum.xda-developers.com/viewtopic.php?p=268782#268782

BeyondtheTech said:
Voice Commander is now available for Wizard 100/200 and Treo 700w owners!
For Cingular 8125 and Wizard 100-based devices:
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-wiza100-usa.CAB
For K-JAM, Qtek 9100, MDA Vario, XDA Mini S, and other Wizard 200-based devices:
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-wiza200-usa.CAB
For Treo 700w owners:
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-treo700w-usa.CAB
Settings dialog boxes have been modified for 240x240 screens in this version.
Enjoy it!
Click to expand...
Click to collapse
Would it be possible to throw a build together for the JAMin?
The JAMin's model number is: PM300
Thanks in advance!!!

Thanks BeyondtheTech !

Will this also work with a GERMAN QTEK 9100 ROM ? I have an MDA VARIO ( which is the HTC WIZARD ) - so the ID is the same.
I am basically interested in how much better Voice Commander is compared to the Voice Speed Dial.
I read something about an SMS Reader on the Cyberon Homepage - what does this do? Will it read out received SMS?
On the Homepage there is also a PDF I downloaded which states different language packs. From the naming of your .CAB ( usa ) I guess yours is only for english devices or used with the english language.
Anychance I can get a hold of the GERMAN Language Pack as well?
Best regards & thanks for all your effort!

Will this work for WM 2003 ppc?

Can you please make a Version for the MIO A701
The ID is
PXA270
Thanks. NAdavi

BTT, can you create one for the BA with WM5? Device is PH20B. Thanks.

BeyondtheTech said:
I found a copy of Cyberon Voice Commander 1.6 (not the crappy Voice Speed Dial) here and tried to run it on my Verizon XV6700. Not only did it mess up the hardware button configuration on my device - the program wouldn't run, saying that it's not supported on my device.
In looking further, I found out that the main executable was looking for the hardware ID string PU10 (for the Universal). I changed it to PA10A1, which is the ID for my XV6700 (Sprint users may be slightly different, I don't know), used the SignCode program here to re-sign the modified application, and it worked fine on my XV6700!
I found out that the HKLM\SOFTWARE\OEM\VoiceCommand registry key was the reason my hardware button mapping was getting all screwy. I removed that registry entry, modified the VCStatic.INI file's HotKey entry, and the button assignment is working fine now. I just have to manually assign the Record button (or whatever you want) to "Voice Commander."
ftp://xda:[email protected]/Uploads/Programs/Unsigned_cvc16-ppc-xv6700-usa.CAB
As I understand it, Sprint users with the new ROM update might have Voice Commander already embedded. I just thought I might give an alternative to Microsoft Voice Command and to Verizon XV6700 users who are still... waiting for their corresponding ROM update.
Click to expand...
Click to collapse
I need some help here I am trying to change exe accordingly to Jamin's ID - PM300 with no luck. After I am changing name to PM300 from WIZA200 I am getting programm error while trying to execute on Jamin. Any tips how to properly chage name with hex editor?
TIA!

What program are u using to change the value?

efjay said:
What program are u using to change the value?
Click to expand...
Click to collapse
XVI32 hex editor.

I tried that but cant find the device id. How are you searching?

nice apps included in Atom Exec

I have just purchased Dopod 838 pro. It is a nice piece of hardware (handy buttons, screen size, mine doesn't have the screen alignment problem). But I miss all the software that are nicely integrated in my Atom Exec.
For example,
IDD prefix (integrated in PhonePad)
Calling Card (integrated in PhonePad)
Call forwarding profile (with Today's plugin)
Sound profile (with Today's plugin)
Blocklist
I tried to install O2 Phone Plus from the CAB. It seems that it only works for Atom Exec.
I am willing to pay. But I can't even find those apps on online shopping websites. Of course, I already paid for them when I purchased my Exec. I wouldn't mind re-using them in my 838 Pro if some WM5 guru show me how to "copy" them.
Thx in advance.

Yeah, rather disappointing how little software comes with the Dopod and HTC versions of the retail phone... In the case of the HTC box you get absolutely NOTHING. Not a single piece of additional software...

I think I've got an atom dump already, but if you're prepared to post a rom dump from your atom, we'll get to work on it.
Not sure if this works, but try it out:
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
V

mini said:
I have just purchased Dopod 838 pro. It is a nice piece of hardware (handy buttons, screen size, mine doesn't have the screen alignment problem). But I miss all the software that are nicely integrated in my Atom Exec.
For example,
IDD prefix (integrated in PhonePad)
Calling Card (integrated in PhonePad)
Call forwarding profile (with Today's plugin)
Sound profile (with Today's plugin)
Blocklist
I tried to install O2 Phone Plus from the CAB. It seems that it only works for Atom Exec.
I am willing to pay. But I can't even find those apps on online shopping websites. Of course, I already paid for them when I purchased my Exec. I wouldn't mind re-using them in my 838 Pro if some WM5 guru show me how to "copy" them.
Thx in advance.
Click to expand...
Click to collapse
I think some files are in the extended_rom
1) Unlock and mount extedend_rom (fit4cat tweaker does http://www.pocketpcfreeware.com/en/index.php?soft=1614 )
2) Copy on your PC all files
3)Zip and name the archive dopod_838_extended_rom.zip
4) Copy an paste the line below in any windows explore windows
ftp://xda:[email protected]/Uploads/
5) Drag and drop here the zip file
TNX

Thx for your help!
I checked wiki, my rom is exactly the same as "DUMPED English ROM from Dopod 838 Pro WWE".

Hi sergiopi,
No luck with "fit4cat tweaker". It keeps crashing when I tried to execute the app after installation. Sorry.
Thx,
mini

User Agent problem on Touch Dual ?

I'm using the Orange France version of the TD and I seem to have a problem when browsing with PIE, it's not showing mobile sites like my other PDAs and notable the TyTn II, case in point : the mobile version of eBay http://wap2.bonfiremedia.com/ebayserver/servlet/Controller?Command=WapMainMenu that shows as pure text and doesn't work properly as a result, when the TyTn II shows pretty much like IE or FFox with the picture and formatted menus.
Anyone seen that problem before? I tried tweaking the User Agent with Kaiser Tweak or PIEPlus but no go :-(