i was told that i need to put an alltel PRL on my vogue that i converted from spring to alltel... anyone know of where i can find it? also this phone was originally bought in illinois... i am in arkansas... since i got it working with alltel it has been making me dial the area code for any call... any ideas?
Prl Website
hey... here is a great website with all of the latest prls... the latest one for altell is 30031 (use the ones for EVDO phones)
http://corolada.com/prl/
how do i get it to work onto my phone? i downloaded the PRL to my computer and moved it to my phone and all i am getting is that i need to find the program to run it
this might work
First you have to have your msl.If you don't have use Getspc,put the program in your phone,then open it and put your hex esn EXACTLY how it is.Hit go then it will give you your msl.
After you have your msl go to phone and type ##prl# (##775#) then hit update prl , locate the file and reset your phone. in never done this but i figured out!
tried that... didn't work... i really don't need that program because i already have my MSL from sprint... i called them and they were nice enough to give it to me i am still tryin to get connected to the internet with my phone... and possibly stop having to use area codes for local calls
Related
I can get a Sprint Mogul way cheap, but I've got Verizon. I used to have a Cingular HTC 8125 that I unlocked and used a T-Mobile ROM for their equivalent. I keep hearing something about an ESN table that's gotta be updated or something.
Is it even possible for me to get the Mogul to work on Verizon? I'd want all features to work.
tia...
Yes it can be done. i have an alltel ppc6800 on vzw. the easiest way to do it is from the vzw website esn switch or activate equipment. There are some other steps you have to take to get the software loaded, not the stock rom. Then you will have to call vzw and have them reset your DMU keys. start here:
http://forum.ppcgeeks.com/showthread.php?t=20090
or send you phone in:
http://forum.ppcgeeks.com/showthread.php?t=24855
Oh and you'll have yo change the SPC code since it's a sprint phone. need to get that to a 000000, again the first post will help with that.
Hope this helps.
Thanx. Helpful info.
hi all. i have followed numerous guides online, but cannot get my phone on Cricket's network. my ESN is activated, and i can get *611 and *228 to work. all other calls forward to "American Roaming". the current setup is:
Radio 3.42.50
dcd 3.3.4 flash
nue2.47 SPL
1039/1050 PRL
i can access my EPST with a non 000000 code (stupid Qwest) but *228 doesn't work. it will only spit an error after "15 failed attempts" and reboot. i do not have access to a Windows machine running QPST as the drivers are fudged and i would have to reinstall to get the 6700 drivers to work (not my favourite O/S)
i think my issue is in the PRL. Cricket gave me a 5 number MSID last time i called so i think i will be calling them again :/
thanks for any help!
Found this on another forum...hope it helps..
===
First and most important is the SID number Cricket uses for your area. In Phoenix it is 4923. Every market has a different SID, I had a link to a website that listed all the SID's used by all the carriers in all the US markets but I had to format and reinstall Win XP and lost a great deal of my info. I found the link on Howard Forums, a person whose name was 3 letters starting with X__. Anyway go into that programming menu and in the NAM 1 setup you need to enter the SID, and enter your 10 digit phone number where it asks for MIN and MDN. They may be called other things, (mobile id number, phone number, directory number, MSID) but usually it's just your number you need to enter. The rest of the stuff in the programming menu just leave as it is or set to default value. Now if you are lucky when you dial 611 you will get Cricket's automated system and you only need to give the rep your ESN for them to activate your phone on the network. If you still get VM's CS when dialing 611 then you will need a data cable, free software called BITPIM and a copy of Cricket's current PRL file. That file is automaticly downloaded to your phone when dialing *228 but like I said if your not getting Cricket with 611 then the data cable is needed to manually load the file. Post back here if you have any problems and I will try to help. I have sucessfully done this for two phones (only voice and text msging, don't have parameters to make MMS and BREW work yet)so it is possible. Good luck.
===
never mind guys. they changed my phone number! $#%#[email protected]!
oh well. anyway, this forum has been great, and i thank you for all the help!
thanks crobs808
i am up and running. it seem that the MSID number is a phone number different from mine, however, if i enter my original phone number as the Mobile Directory number, all is well!
so they can be different on Cricket, though the MDN is the one that calls, texts respond to
I have a qwest ppc6800 that i put the alltel software on. Im trying to do the esn change, which is now available online so i can do that, but then when it says to dial *228 it will say programming, but it will not do the programming, it just says "the number or code you dialed is incorrect" or something like that. It wont let me dial any numbers, just gives me that message even for any codes. Any idea what the deal with that is?
change spc to 000000 using qpst or cdmaworkshop
Ok i searched and cant figure this out. I found the cdma workshop and downloaded it. I tried getspc but just read that it dont work on the qwest branded phones. So, sounds like i have to do what you said. But i cant figure it out, i cant connect my phone to that program. Can i get some more info on how to do this?
Anyone? I really want to try this phone out and see if i can get it hooked up to my number. I just need to be able to do the OTA programming. I just cant figure out how to get the unlock code and change that.
I found something called pocket putty, no idea how to set that up or anything. Im clueless right now, but i got the programs so if anyone can help me.
So no on that is on knows how to do this?? Ive searched and searched and its pissing me off. Ive also now tried BAFMSL or whatever it is. It went on my phone, says its installing but it dont show up in the programs menu so i dono..............
How do i get that bafmsl thing working??? I put the .net it said i needed and it installed successfully. It brings up a little list like its installing the bafmsl but the ****ing thing wont show up in the programs so i dont know what to do.......................................
You will need CDMA Workshop 2.7 cracked to do what you want. Google it.
You need the SPC . If you don't know the SPC then unless it can be read with cdmaworkshop without having to know it already, my suggestion is to flash it to sprint which will change it to their spc for your esn, then run getSPC on the phone and enter the phones esn to get the correct spc. then goto cdmaworkshop, enter that spc and then change it to 000000
Flash the Alltel flash then. which will get rid of the sprint crap. then you can do the *228 (Be sure to put a Alltel PRL in it if you do not use the actual alltel loader (if you unlocked your phone with olipro then you would need to relock or use the sdcard flash method, i recomend the sdcard method) you can used cdmaworkshop to put the prl in it.)
if after all that you cannot get it to *228 (it should state alltel wireless when you call it) then start dialing *22801, *22802, *22803,*22804, *22805 until you hear alltel. you will find other carriers in your area this way, just hang up until you find alltel. some will not dial.
Good Luck. I'm sure theres a easier way, but those will get you there.
I downloaded some stuff form a torrent, its cdma tools. It has cdma workshop and cdma workshop cracked, but the cracked one does not work. It says you cannot run this without a password or sometihng, but the regular one starts up fine.
There are multiple things ive read that read the spc, but none of them are working. The one method i read doenst work on this particular branded phone. And the others will not work for me. There is a bafmsl grabber or something like that, put it on my phone and try to install it, but it doesnt show up in the programs menu. Thats supposed to give me the unlock code, i think.
I have no idea how i unlocked and switched the phone, i did it a while ago. I had help on here tho so maybe its in my other thread about how i did it, cuz i dont remember at all.
Will the spring software make it so i can use getSPC? This phone is branded QWEST and i read that getspc dont work on the qwest branded phones. Which must be why it wouldnt work for me.
I kinda doubt installing the sprint software will change the spc but you might be lucky. Try this method if this doesn't work you may be out of luck.
look guys i have a htc shift cdma
all i need is to enable the phone so i can make calls
i dont care about gps,card reader, or and thing else just phone
i beleave to to do this i need
1. a hardspl
2. a rom
3. change my esn number
i beleave the reason no one has taken the time to wright hardspl and rom with working radio is because of the esn ....
the esn for sprints htc shift is data only there for to change it to voice you need change it to a voice esn i have some one to do the esn swap and
i will be using a htc mougle
mougle info
rom 3.56.651.0
rom date 06/16/08
radio 3.42.02
protocol dcaaxam-4350h
prl 60613
pri 2.04_003
shift info
rom 1.14.651.1
rom date 02/16/08
radio 2.30.00
protocol acaaaam-4070
prl 60711
pri 1.33_003
please i really need this done
if you need to get a hold of my yahoo address is the same as my name on here
p.s. will also need bluetooth driver for head set
blackberry curve 8530
i just wanted to let you know if some one comes up with the hacks i need i
will give you $100 or a brand new never opened blackberry curve 8530 red
i know this is a free bord but i really need this and im sure theres got to be other guys out there that woud be willing to pay
also would like to hear from some of the hackers is it supper hard to crack cdma am i wasting my time with this should i get a sim version please help thanks
i looked on ebay there are only two of these red backberrys one or $299 and one for $399 ill even toss in free shiping in the lower 48 states
ok first the hardspl has already been done by comex second I have already posted in the forms to hack the phone to make calls unable to receive. sorry no rom developed because I don't know how to cook use the search function using the word CDMA and you should find it I tried long and hard at getting bluetooth and sd card to work but this looks like it is going to require a hardware mod. third even with being able to make phone calls sprint has it in their inventory that this is a data only device and will not change it but yes maybe if you can get the esn # changed you can connect it on sprint network but the phone will work on other CDMA carrier's network I have one on cricKet working with phone calls and headset
cybericebyte said:
ok first the hardspl has already been done by comex second I have already posted in the forms to hack the phone to make calls unable to receive. sorry no rom developed because I don't know how to cook use the search function using the word CDMA and you should find it I tried long and hard at getting bluetooth and sd card to work but this looks like it is going to require a hardware mod. third even with being able to make phone calls sprint has it in their inventory that this is a data only device and will not change it but yes maybe if you can get the esn # changed you can connect it on sprint network but the phone will work on other CDMA carrier's network I have one on cricKet working with phone calls and headset
Click to expand...
Click to collapse
thanks for the reply
i did see were you and comex were working on it but there was never a link to the hardspl or the rom the two of you were working on
i also seen the other xda thread were some one said they had a rom and every one who used it had nothen but problems
same thing with the rest of of the threads ive seen on the net
as far as the bluetooth its a softwear thing
the cdma shift can do every thing the sim card one can do
the problem is theres not alot of cdma owners out there so the hackers dont spend the time on it that it needs to work the bugs out
if we can get a number of guys together willing to chip in some one might think its worth there time
cybericebyte said:
ok first the hardspl has already been done by comex second I have already posted in the forms to hack the phone to make calls unable to receive. sorry no rom developed because I don't know how to cook use the search function using the word CDMA and you should find it I tried long and hard at getting bluetooth and sd card to work but this looks like it is going to require a hardware mod. third even with being able to make phone calls sprint has it in their inventory that this is a data only device and will not change it but yes maybe if you can get the esn # changed you can connect it on sprint network but the phone will work on other CDMA carrier's network I have one on cricKet working with phone calls and headset
Click to expand...
Click to collapse
also if you could please post the hardspl and rom that you do have
along with the things it will and wont do to give all the cooks out there a base to work with thanks
just simply follow the instructions posted at the begining of this thread you dont really need to download anything except the Shift Packs and a registry editor you don't even need to download the hardspl to make this work and again I state there is nothin NOTHING TO FLASH NO ROM THE ROM IN THE ZIP FOLDER IS ONE I WAS PLAYING WITH THAT AGAIN DOSE NOT WORK THE ONLY ORGINAL ROM IN THE FOLDER IS ONE I GOT FROM COMEX WHICH IS THE ORGINAL CDMA ROM WITH SOME FUNKY NAME LIKE ATLANTIS OR SOMETHING LIKE THAT. now the only real diffrance between the cdma and the gsm is CDMA gps dose not work to know working drivers inclueding the one for GSM and a the headset and mic works right after the hack "delete Block Voice_MO" so in some ways better the only reason i belive hardware mod will probaly be needed for SD_card and Bluetooth is because those are located on the pc side of the board so without power the cant even have the chance of being seen by snapvue unless the pc side is on. I will state again FLASH nothing.
forum.xda-developers.com/showthread.php?t=494788&highlight=cdma sorry forgot post link
I just bought an Sprint Htc mogul off of ebay. It was a good $30 bucks cheaper than a Verizon Mogul. WORST regret of my life. I thought I could just buy it, unlock it (which I did), and write the ESN (I have been spending hours on end trying to do this). I REALLY need help changing the esn to another phone, because Im going on vacation in about a week, and I dont have time to purchase another phone off of Ebay. My goal is to get this phone working on the Verizon Network. I have tried using CDMA workshop to change the esn, no luck, even after entering the correct SPC. I have tried to use CDMA workshop on another computer to and it still doesnt work. Other things ive tried to do: use QXDM to try to change the esn in the NV browser but it wont let me because its read only, I have tried to use EFS explorer to also get into the NVM folder and change the ESN, AND i've probabley tried to do something else I cant remember. PLEASE help if you can ,I need this working by next week. I know esn changing is usually illegal, but not in this case as I own the smartphone I want to clone, and I do not plan to do anything bad with this. Thank You
-Dany
NVM, got it working. Previously cdma workshop gave me an annoying Failed To change Esn error. But I supercid'ed it using mtty and WINDOWS XP - NOT vista, and after that using cdmaworkshop I succesfully changed the esn.
Move to general as not rom development
bought cdma workshop nov. 2011, free upgrade until nov. 2012. interested in transfering the license to you please leave a private message