Related
Hi Guys
I got me a real pain in the arse. I just recently got a well cheap MDA 3 from T-Mobile (UK). "Great!" I thought. :-(
I cant get the fecking thing to see my Linksys 54g (supports 11) network.
OK. Here's the details. I have removed ALL security from my wifi network, im not happy about this but I figure I can get the rest of it to work AFTER the fact.
The Network Cards app sees my SSID system and says connected (yet my router does not show it as connected). I then go into Wireless LAN application and it just says "Scanning Network..... " and never finds my network :-(
Now, some extra bonus point questions:
1 - Is there a way to find the devices mac address (apart from the when it eventually connects to the router)
2 - Can i specify a SSID apart from the that LEAP thing (what is that and will my router support it)?
3 - Am i correct in assuming im connecting using the "Tiacxwln Compatible Wireless Modem"?
4 - is there a way to deleted unwanted "Wireless Networks" in the WLAN application?
Remember - this is trying to connect to a totaly unprotected network, it sees it but does not seem to connect in the WLAN application.
Many thanks for ANY help you may be able to give and have a great weekend!
Im having a the same problem
Can any one help? :shock:
Thanks
cld anyone plz help me in connecting xda exec to WiFi. I have Netgear : DG834G and the router configrations are shown in the picture
under > CONFIGURE WIRELESS NETWORKS
i can see the available network named NETGEAR ----- which is the name of my wireless router,but it keeps displaying connecting/available only.
if there is any step by step instructions in the forum plz give me the link
many thanks
Check you've got the following settings in "Configure Wireless Network" on your Exec:
General tab:
Network name: NETGEAR
Connects to: The Internet
Network key tab:
Authentication: WPA-PSK
Data Encryption: TKIP
Network key: [whatever it is]
Also, make sure your WiFi network adaptor in your Exec is configured for static or dynamic IP, whatever your network router is set up for.
On this site i found a possible sollution for a WiFi network tool for you PPC
http://www.cirond.com/pocketwinc.php
[/url]
On this site i found a possible sollution for a WiFi network tool for you PPC
http://www.cirond.com/pocketwinc.php
Don't forget to reset your access point. Sometimes a simple reset takes care of the connection problem.
WizzarD-me said:
On this site i found a possible sollution for a WiFi network tool for you PPC
http://www.cirond.com/pocketwinc.php
Click to expand...
Click to collapse
Does it work on the HTC Universal?
Yes the software is written for PPC. And the screenshots are windows 2003.
It should work on HTC Universal. I'm testing the software now. (only 9 Euro's) It should create more overview when configuring the WiFi network.
Benefits of pocketWinc:
Get Connected Fast
One Touch Web Browsing
Manage Connection Lists
Wireless Troubleshooting Tools
Check for Internet Connections
View Access Point Status
(all rights reserved)
for more info click on the link.
http://www.cirond.com/pocketwinc.php
Sorry guys
I tried the software but it doesn't support Qtek Universal.
The tool doesn't recognize the wifi adapter. Note that i did turn it on.
I hope they will support the Universal soon!
WizzarD-me said:
Sorry guys
I tried the software but it doesn't support Qtek Universal.
The tool doesn't recognize the wifi adapter. Note that i did turn it on.
I hope they will support the Universal soon!
Click to expand...
Click to collapse
Hi WizzarD-me,
If you are looking for a WiFi scanner. Try WiFiFoFum, it works great on the Universal.
http://www.aspecto-software.com/Forum/viewtopic.php?t=311&postdays=0&postorder=asc&start=30
Refer to mine, I have the Netgear router using a jasjar.
I dont use the WPA-SPK, I use the 64bit WEP encryption, and have provided the settings on my router and on my JJ, hope they help.
If you need further help directly PM me and we can use messenger by my screen shots should be self explanatory.
If you dont mind, could you let me know when you have connected and retrieved so that I can make appropriate edits to this post.
Attachments deleted subsequently....
cktlcmd said:
WizzarD-me said:
Sorry guys
I tried the software but it doesn't support Qtek Universal.
The tool doesn't recognize the wifi adapter. Note that i did turn it on.
I hope they will support the Universal soon!
Click to expand...
Click to collapse
Hi WizzarD-me,
If you are looking for a WiFi scanner. Try WiFiFoFum, it works great on the Universal.
http://www.aspecto-software.com/Forum/viewtopic.php?t=311&postdays=0&postorder=asc&start=30
Click to expand...
Click to collapse
Update
I was thinking. Since the option for connecting to the internet automaticaly does not indicate a WiFi connection... the PocketWinc program didn't find the WiFi cause i had my phone connection online.
After closing the program and turning of the phone connection and enabling the WiFi connection the program recognized the WiFi antenna.
Still experimenting with it at home. It has a Wifi Sniffer option in which you can set a WiFi sniffer interval. The program remembers the networks and you can set you favorites and even remember the settings on those.
The reason i set this program on this post was and still is for the overview of settings the program provides. You can sellect the network SSID and create a report of the IP configuration. There are several other interesting options like ping, trace route and more.
PS thanks for the link. I will check the WIFOFUM thingy
If anyone has the time could they help
I need someone to talk me through wifi..
I have xda exec but cant seem to get connected via access point..
I have installed the above software and wififofum. but nothing
Please help
router to have;
- ssid created, suggest a family name or similar, broadcast it
- dhcp enabled and auto control
- enable wep encryption (128 or 64 bit)
- use a shared key 9usually a choice of 4, pick one)
universal needs:
- wifi turned on!
_ start - settings - connections - network
- ypu should see it searching, cancel auto detects, do it manually
- in connections, add
- insert info above
* ssid
* choose wep encryption, shared, remove auto, enter the choosen key, txice
* slect and tell it which key number you chose (eg 1-4)
those are my settings to get it working initially
You can later if you want disable your dhcp, dns, wins n stuff
you may want to consider stopping broadcasting ssid later to prevent people looking for the network, but the wep key encryption should prevent all but the most enthusiastic genius from using the network.
this works on my netgear system.
I originally posted this message a few days ago but as there were no responses I thought I'd try again. I'd appreciate any advice - thanks for looking ...
I have a XDA mini S. At home I have a wireless router/hub that is hard connected to my PC, but I connect to internet from my laptop via wifi (direct to router/hub) using an always on broadband connection.
I use WPA security, but when I tried to set up the XDA to connect wifi it didn't seem to have the ability to enter the WPA settings.
Ideally I'd like to use the XDA to network with the PC and the laptop for file transfers, but if I can't do that, at least I'd want to enable the XDA to access the inernet via the router/hub directly (ie without the other devices being turned on).
Can anyone help with this please - I know from other postings on this site that I'm not the only sufferer, but I haven't see a definitive solution.
Thanks
Charles
Make sure wireless is ENABLED.
Then
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click the "Wireless" Tab
Add a new connection
General Tab
Network Name: "MyNetwork" (or whatever you want)
Connects to: "The Internet" ("Work" also works for me)
Network Key Tab
Authentification: WPA-PSK
Network Key: "makeUpAKeyHere_thats-long&complex" (I use plenty of ££%!* type characters in mine)
802.1x Tab
Uncheck Use IEEE 802.1x network access control
All done!
Now make sure you have EXACTLY the same Network Key in your router and you should be good to go.
Now to connect to your PC & Laptops you use Resco Explorer 2005 (you'll need to buy it but worth every penny!) to MAP shares from your network.
How to is in This Thread
Worked for me, and I've only had my Mini S (my first PDA ever) a week!
Good luck!
Mark.
I just got my MDA Vario (same as XDA Mini S right?) today and the manual has absolutely nothing about connecting over wi-fi to *anything* let alone my home wi-fi router but I was pleased to find this thread , for a while
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click to expand...
Click to collapse
doesn't have a "wireless" tab (or any tabs for that matter) but it does offer me a list of adapters to let me modify settings (no option to add one though).
The nearest thing to wi-fi is "SDIO WLAN Wireless Adapter" but I'm pretty sure that would relate to something plugged in to the SDIO slot, and not the built in Wi-Fi hardware. Am I wrong?
I've fumbled around a bit and found one screen which offers a view where I might be able to enter the details you've given here, but the textboxes are all locked/readonly (empty) and I can't write anything in them.
I'm really disappointed so far.
the sdio card is the correct one, the wizard has an sdio wifi card inside I believe.
if you select network card under settings-connections you should be able to add a new connection there, if in doubt search for wifi connection, or post back here for more help, good luck
R
I got a PM about this thread, I thought I'd reply here to as the info could help others....In additon othres may be able to elaborate more on the 802.1 query
Mark,
I had the same problem regarding my mini s which you recently answered. I have a US robotics wireless router (9108) and connect it to my laptop (Thinkpad X31) using WPA-PSK and TKIP - the laptop does not allow me to check 802.1 which I understand is for large companies with a special server.
With my miniS I have found that as soon as I enter authentication WPA-PSK and encyption TKIP, the system automatically ticks 802.1 and I cannot access the page to turn it off.
I have tried communicating with O2 via email but they haven't really helped. What I want to know is whether on your machine with WPA-PSK and TKIP you can turn off 802.1 in which case mine has a fault and I can swap it - otherwise I have to find another smart phone!
Click to expand...
Click to collapse
Hi there, I'm a new user of these phones and understand little of Networking but I'll share my settings with you...
Under "Configure Wireless Network" I have:-
Under "General" Tab I have:-
Network Name: MyNetwork
Connects To: Work
Under "Network Key" Tab I have:-
Authentification: WPA-PSK
Data Encryption: TKIP
{Greyed Out} The key is automatically provided
Network Key:- ABCDE1234&*^ <- Whatever key you make up
{Greyed Out} Key Index: 1
Under "802.1x" Tab I have:-
Ticked use IEEE 802.1x network access control
(I can't change this.)
However on my domestic Netgear DG834G router everything connects just fine, g or b. Have you flashed your phone to the latest O2 firmware?
Mine is
ROM 2.21.4.1 WWE
ROM Date 3/9/06
Radio Version 02.07.10
Protocol Version 413.1.03
ExtROM Version:- 2.21.4.101
I hope this helps,
Mark.
PS. I'll post this in the thread too, it may help others.
hello
i recently purchased the xda mini s and a wifi usb adaptor. i am having trouble accessing the internet. my computer connects to the internet using ethernet to my wall (im not sure where it goes from there). i can connect my phone to a peer to peer wifi network but it does not let use the internet, could anyone help me with the settings please i would greatly appreciate it.
many thanks
harvey
To achieve that you need to set your primary connection as shared in network connections. Once you do that, adhoc mode should be possible without issue.
Please help - similar problem
Hi - I have an XDA Mini S and have connected without issue to the Internet via my router (Wirelessly of course).
The issue I have is that I cannot connect to any network shares on my PC. When I had a CF wireless card in my Ipaq I could do without issue. I have downloaded a ping proggy to XDA and can ping router but cannot ping the PC I have the shares on.
Normally (If I was using a laptop) I would check Workgroup/Domain settings, authentication credentials etc...nothing like this on XDA.
Please help
Wiggz
Quick - fix
I have spent hours messing around with this - however I have had a similar problem with a corporate laptop which wouldn't work.
I changed the router from WPA to WEP and bang - worked straight away. Exactly the same on my XDA Exec so should be same for Mini S (pocket PC 2005).
Hope this helps.
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi for transferring files.
it shows the connections status excellent on both devices with ip address 169.254.72.236 on ppc and 169.254.130.63 on laptop.
i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
MDA Wifi Wont Connect
Hi there-I have an mda vario which I was able to unlock as it was locked to t-mobile and I am with another network. After ages I was able to get a connection to my router or at least it says that it is connected. However I still cant connect to the net via wifi on my mda. I have put in the settings for wpa and wpa-psk, etc have unticked the 802.1x box etc but still no joy. Can anyone help?
Thanks
Morgas
Hi all, new here, thanks for the info posted, was useful but i'm still having problems with the wifi on my xda mini s to my netgear dg834gt router with sky broadband.
The problem seems to be that my xda finally connected to my broadband and router, but now when I try to use internet explorer on my xda I just get
"400 Bad Request"
"Bad filename."
Can anyone help with this? Thanks in advance
Hi,
I don't think this is currently possible but I do not see any reason why? Does anyone know if there is a 3rd party app to provide this?
Thanks,
Phillip
Possible ! (Well somewhat)
This is very much possible. I got it working as follows :
(1) Create a WiFi connection on Pocket Pc with ad-hoc feature and Open Security, make sure you select "Work" as the connection.
(2) Give the WiFi adapter on Pocket PC an internal address similar to 192.168.0.2 (255.255.255.0)
(3) On your PC/Laptop set WiFi adapter IP to 192.168.0.1 (255.255.255.0)
(4) You need a program like Pocket PC Proxy to be installed on the Pocket PC.
(5) Enable proxy settings on Laptop as 192.168.0.2:80 (or the port set on the proxy prog on ppc)
(6) Enable WiFi on ppc
And Voila ! You can browse internet using the connection on your ppc.
Hi,
Thanks, I will give this a try. However, I can't seem to find this piece of software (Pocket PC Proxy). Can you point me in the right direction?
Thanks
Here you go...
Thanks for the download, I'm using an HTC Touch (Elf) with WM6. I can't seem to figure out how to create an ad-hoc wifi connection?
(Sorry to be a pain but i think that this will benefit others too!)
Ahaa, I managed to figure out how to create an adhoc network on the Pocket PC, I assigned it the correct IP (as above) and basically followed the instructions.
I'm actually trying to get my iPod Touch to connect to the net via the HTC Touch.
I iPod sees the wifi connection and connects perfectly, I can even assign the ip and subnet mask. However, I simply can not connect to the internet either with or without the proxy. Any suggestions on what I am missing?
THanks
What kind of an internet connection do you have on the ppc ?
- GPRS/EDGE ? Is it always connected/on ?
Got it working, you can ignore the following
Thanks!
------
Hi, here is everything I have done:
Connections, Internet
Modem: T-Mobile Internet, GPRS (UK, no edge)
Proxy Settings: This network connects to the internet
This network uses a proxy server to conncet to the internet
149.254.291.132
(This was all set by the phone when I switched it on)
My Work Connection:
Nothing set up here
WIFI
Add New...
Network Name: test
Connects to: Work
This is a device-to-device (ad-hoc) connection
Authentication: Open
Data Encryption: Disabled
This seems to create an ad-hoc connection and sits there with 'Connecting' until another device connects to it.
Network Adapters
My network card connects to: Work
IEEE 802.11b/g Compatible WIFI....
Edit:
Use specific IP address:
192.168.0.2
255.255.255.0
(Everything else blank)
Wireless LAN
SSID: test
Mode: 802.11 Ad hoc
Channel: 11
When I connect two devices together the IP shown under advanced seems to read 192.168.0.21 (I think this should end .2 so not sure why it isn't)
If I connect my laptop I can 'ping' 192.168.0.2 and that works but both my laptop and ipod touch do not seem to be able to connect to the internet.
On the ipod touch I simply get 'Server not found' or something similar.
(I have remembered to run PocketPCProxy)
Yes, the GPRS is connected whenever I run PocketPCProxy.
I would really appreciate any help you can give, I really like using the browser on my ipod Touch but don't really want to go the whole hog and buy an iPhone because it is so tied down and restricted.
Thanks,
Phillip
I don't know what I have done but suddenly it works, now it comes up and shows the correct ip on my pocket pc.
Anyway, thanks for your help!
Hi everyone,
I have been trying to ad-hoc connect my PC (Lenovo X60s with XPSP2) to HTC Touch via WiFi to be able to share files and stream music.
It did connect and pinged ok, however the two just refuse to see one another on their networks.
Does anyone have any successful experience trying for the same?
Regards,
Madana
I tried this between my TyTN and TyTN II, the latter being the gateway, but the TyTN insists on still using GPRS for its internet instead of the wifi. Very annoying, and it's runing WM5 so (i dont think) you can't turn of the GPRS like you can with WM6.
Does anyone know how to make it use wifi, and wifi only for internet?
Thanks,
Sebastian
i have installed pocket pc proxy after a file called ......ppc3.arm.cab (i don't remember how it begins) but it doesn't work... any idea?
same here the pocket pc proxy when i run shows a fatal error in running it.
what should we do??
Hello,
I have samsung c6712 with wifi connected with internet near internet company with router as it is free for me, setting and pasaword is setted by those guys on my phone but they didnot give me their password and settings.
i like to run/use internet on my pc (xp32) with cable connection. How can I use that
[email protected]
hi guys,
i am hoping i will get the solution for my problem from this forum if there is one on this earth.
i bought htc h2.i am trying to connect my htc to my wireless router at home but its not connecting to it.it has found my home network and trying to connect but doesnt connect actually.
I have a nokia n80 as well.i just need to put the wep key in that and it connects with the wireless dont know whats wrong with my htc.
when i go to the wifi setting and put the wep key in further details are as follows
netowrk to access: only access point
Network name: home
connects to: The internet
authentication : shared
data encryption: wep
network key : xxxxxxxx
key index:1
use IEEE 802.1 option is checked.
EAP type is smart car or certificate
here when i click on properties tab it says
"Cannot log on to the wireless network.this network requires a personal certificate to positevely identify you"
I have also tried aquiring the certificate but it doesnt retrieve it
i put the log in,password and server as my netgear's IP address.
on the wifi advanced settings in HTC it shows the MAC address but doesnt show the IP address .
please please help pme out here.i have spent hours sorting this out but not successfull yet.hope anyone experienced can help me here
Thanx in advance.
regards
any advice guys???please guide me into the right direction and i will try and sort this problem out by trial and error.
have u tried searching and connecting with wifi monster. im sure it should work.
uncheck
Use IEEE 802.1x network access control
thanx for the suggestions.before doing anythingele i hard reset the phone.and it is connecting to wifi fine now.