My htc doesnt connect to wifi :( help please - HD2 General

hi guys,
i am hoping i will get the solution for my problem from this forum if there is one on this earth.
i bought htc h2.i am trying to connect my htc to my wireless router at home but its not connecting to it.it has found my home network and trying to connect but doesnt connect actually.
I have a nokia n80 as well.i just need to put the wep key in that and it connects with the wireless dont know whats wrong with my htc.
when i go to the wifi setting and put the wep key in further details are as follows
netowrk to access: only access point
Network name: home
connects to: The internet
authentication : shared
data encryption: wep
network key : xxxxxxxx
key index:1
use IEEE 802.1 option is checked.
EAP type is smart car or certificate
here when i click on properties tab it says
"Cannot log on to the wireless network.this network requires a personal certificate to positevely identify you"
I have also tried aquiring the certificate but it doesnt retrieve it
i put the log in,password and server as my netgear's IP address.
on the wifi advanced settings in HTC it shows the MAC address but doesnt show the IP address .
please please help pme out here.i have spent hours sorting this out but not successfull yet.hope anyone experienced can help me here
Thanx in advance.
regards

any advice guys???please guide me into the right direction and i will try and sort this problem out by trial and error.

have u tried searching and connecting with wifi monster. im sure it should work.

uncheck
Use IEEE 802.1x network access control

thanx for the suggestions.before doing anythingele i hard reset the phone.and it is connecting to wifi fine now.

Related

i mate k-jam WIFI problem?

the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
HELP ME
Someone can help me?!
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
tatata
Check that you have set the connection type to "internet" - I suspect this problem occurs because you have it set to "work".
Chris
I am having the same problem , my signal is nearly 100%, the phone is set to internet, Belkin 54g,, authentication is 'open', WEP, the key was entered manually (26 digits ), do i use 802.1 access ?
mode is infrastructure, tx rate is auto, channel 11,, the mac and ip address is correct,, what is enroll ?
I have tried everything and it is obviously connected so why will it not load pages ?
Had the same problem myself with my XDA IIs. Only solution I could find was to turn disable the firewall on my router. No idea why that worked, and cant find a way to turn the firewall on without causing the problem again, but it did work!
got smilar problem here, some times even when i connected and browsed web say 2 mins. ago suddenly connection can not be established i have tried it with belkin 54g linksys and 3com routers all same couldnt find any solution and accepted it as it is
gadget_uk said:
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
Click to expand...
Click to collapse
hello All and Gadget
Bought the XDA mini S from 02 yesterday and havent really been playing with it except installing programs, removing the 02 files and finding my way round the phone.
Anyway, having problem with getting WIFI, can anyone help?
At home, I use Wanadoo broadbrand wireless 'livebox' and here are the following details on the Mini S:
Wireless Lan> main tab> SSID - blank, mode - infrastruture, BSSID -blank, Tx rate - auto, channel - 0
Advanced tab > status, not connected to network, MAC - 00-09-2D-8D-66-BF, IP - 0.0.0.0
network cards tab> wireless tab - wanadoo - 2D9E available
network adaptors> network card connects to 'The internet'
Thanks in advance
Andy
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
an2ony said:
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
Click to expand...
Click to collapse
Thanks for the prompt reply. Another stupid question is how do I find out if I have security on my wireless router and if i have security, how can i permit the mac code to do its stuff.
Thanks again.
Andy
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
an2ony said:
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
Click to expand...
Click to collapse
Anthony
First of all, thanks for the link. I am able to see all the details (technical) of my livebox on the wanadoo configuration page.
There is a WEP key set and having tried to enter as much info on the relevant places on the mini s, no luck.
The mini s does recognise the 'livebox' and connects to it then drops off. However, it doesnt pick up any info from the 'box' to complete the relevant wireless tabs on the mini s.
Dont know how I'm going to resolve this but thanks for your help so far.
Shame not to utilise the Mini S with my current wireless broadband connnection.
Cheers
Andy
Hi All
Thanks for the advice so far and after so many attempts I am still unable to configure the mini s to use the wireless connection at home.
Need a huge favour. Would anyone give up a few minutes of their time to go through the configuration on the phone with me.
Please PM me your contact number and when it is convienent for me to call you back.
Much appreciated.
Andy
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
cozzykim said:
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
Click to expand...
Click to collapse
ello mate
I gotta agree with the activesync thing. I had the same problem as of 2 mins ago just tried exiting active sync and would ya believe it my wi fi now works. So i gotta say cheers mate!
cheers
tatata said:
the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
Click to expand...
Click to collapse
I had the same problem with my Linksys WRT54G before. I upgraded the firmware (dowloaded from Linksys website) of my WRT54G and the problem solved.
New to the board (Just got my Cingular 8125) Having the same problem.
I get an IP addressfrom my router, it shows I am connected on my network settings, but still can't pull up any pages. It has never worked since I got it (only 3 days though) Someone please help us.
If >Connection Manager>Settings>WiFi Settings shows you have an IP address and are connected (Advanced :Status) then check your firewall settings and try stopping ActiveSync, always seems to do the trick for me
Also check out this post, could this be your problem?
http://forum.xda-developers.com/viewtopic.php?t=41469
@ cozzykim
I have shut down my zone alarm and don't have firewall enabled on my linksys WRV54G. ActivesSync is also closed. Still no luck
I will try to update my ROM it is not far fetched that cingular Jerry rigged the WiFi. I hope ther is a class action suit coming soon.
Thanks for your help.[/quote]

Having Problems Connecting with Wifi!

I have a MDA PRO
Rom Version: 1.12.42 wwe
Radio : 1.08.00
Protocol: 42.41.P8
Ext rom: 1.12.126 WWE
What I want to do: I am trying to connect to the internet using pocket internet explorer using my wifi network at home and not GPRS.
The problem: I go to 'Settings' >>"connections" tab >> 'Network Cards'>> "wirelss" tab
It displays my wifi connection and it says "available" so I {tap and hold} and select 'connect'. It then states that it is 'connecting' but it doesnt connect and reverts back to saying that my network is "available'.
What am I doing wrong? Do I have to set up something on my pc? Any additional settings on my Universal that i should initiate?
I tried searching the forum with no luck in finding someone with the same problem. Is there a thread with a guide that can help me out. Thanks for your time.
soft reset the phone
then no need to go into settings
on today screen (main screen) touch the "G" at the top
it will ask you if you want to activate wifi
select
it should connect automatically
I have exactly the same problem with my M5000.
Can anyone help?
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
What happened there ! :roll:
On the Blue Angel, it was simple - you just set up a new connection, enter the PSK, connect and off you go!
On the Universal, however, I'm having no joy. I've set up the WEP and PSK stuff and the PDA can connect to the network, but when I try and open IE it opens up GPRS. Also, PC Anywhere only works via USB - again, it won't connect via WiFi. I'm sure it's just a case of adjusting some settings but I don't know which ones!
Wifi Connection Problems
Hi I'm experiencing exactly the same problems trying to connect.
I have a Wanadoo Livebox and my xda exec.
I've tried with my connection both unsecured and with 128bit wep encryption using the correct wep key....I still get connecting, followed by available, repeated continuously?
I have the xda set to connect to "the internet" and the authentication to "open". Key index is 1.
Can anyone help?
Thanks
Tim
Wifi Connection Problems
Hi, Just a bit more info...
Encryption is set to "wep"
Mac address is associated with the livebox.
802.1x is ticked to use IEEE 802.1x network access control.
EAP type is Smart cCard or Certificate
Thanks
Tim
Rom version 1.13.82 WWE
Rom date 11/30/05
Radio version 1.04.02
Protocol version 42.37.P8
ExtROM version 1.13.188 WWE
I just checked (with my Blue Angel) that the router and everything else is working and I'm happy to say it all is.
I set up the new connection on the BA from scratch - WPA-PSK enabled, nice long PSK, and I'm using TKIP. Network connects to: The Internet.
This allows me to remote up to the PC via PC Anywhere, and allows me to connect to the 'Net for free via the WiFi router.
When I duplicate the settings on the Universal, neither of the above works. What am I doing wrong?
Help!
You haven't got mac address filtering enabled on your router, and have forgotten to add your Universal's mac address to the list, have you?
Cheers,
Steve.
No, it's disabled.
hehe i had this problem tonight and was going to post up.
Has your router got MAC-control or anything on it? My SSID is not set to broadcast so I put the settings in manually.
I deleted the settings, and put them in manually again a few times, making sure I had the encryption stuff set correctly.
Eventually it connected and now seems to be working fine.
JAmes
Ad Hoc?
Ok, I've tried every possible combination possible and nothing is helping. So my next question to get around this problem>>>>>>>>>>>>>>>>>>>>>>>>>
Can I use my pc as a ad-hoc and us it as my gateway for my Universal?
I have a pc in the office down the hall with the actually wireless router, I have a pc in my room that is accessing the wireless router from the office.
Please let 'US' know if you have tried ad hoc or if you find the right settings to connect to the main wireless router.
Thank you
I am on my wifi network typing this, and my settings show 802.1x network access control not having a tick and network adapter connected to Work......on my iPaq hx4700 before, I used these same settings as they seemed to work well, although it ran WM2003SE not WM5.....
All this said, however, but I was lucky in that my MDA Pro connected to my wifi network at the first attempt - except not with as strong a signal as the iPaq had.....
Wifi Settings
Can anyone who has connected okay, let us have their full settings, so that we can try them?
Is your Router set 802.11g only?
You need to set the router to accept 802.11b and 802.11g.
If your router will only output at 54g, you could try the hack to switch the universal to 54g. I am yet to try this so I don't know if it works.
My MDA Pro connected straight out of the box once I set the ssid and encryption.
Hope this helps
Dave
I've been on the phone talking to 3rd line support at Orange.
Basically, the guy is totally flummoxed!
After trying to talk me through the setup from memory, it seems as though a whole menu of WiFi settings has disappeared from the phone - specifically, the ones that we need! This being the case, he's going to get hold of an M5000 tomorrow and will then bell me back so we can go through the whole process together, both of us using an M5000.
One thought that did occur to me was this: I've only just (like, 3 days ago!) upgraded to the M5000 and I've taken on some kind of free Internet access scheme with my tariff. Could it be that the settings for that (that are sent by Orange in a data SMS) have knackered the WiFi setup?
I'm considering a hard reset with a soft reset before the .CAB files install but will at least wait until tomorrow.
I'll keep you all posted....

Wifi connection problem with XDA mini S

I originally posted this message a few days ago but as there were no responses I thought I'd try again. I'd appreciate any advice - thanks for looking ...
I have a XDA mini S. At home I have a wireless router/hub that is hard connected to my PC, but I connect to internet from my laptop via wifi (direct to router/hub) using an always on broadband connection.
I use WPA security, but when I tried to set up the XDA to connect wifi it didn't seem to have the ability to enter the WPA settings.
Ideally I'd like to use the XDA to network with the PC and the laptop for file transfers, but if I can't do that, at least I'd want to enable the XDA to access the inernet via the router/hub directly (ie without the other devices being turned on).
Can anyone help with this please - I know from other postings on this site that I'm not the only sufferer, but I haven't see a definitive solution.
Thanks
Charles
Make sure wireless is ENABLED.
Then
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click the "Wireless" Tab
Add a new connection
General Tab
Network Name: "MyNetwork" (or whatever you want)
Connects to: "The Internet" ("Work" also works for me)
Network Key Tab
Authentification: WPA-PSK
Network Key: "makeUpAKeyHere_thats-long&complex" (I use plenty of ££%!* type characters in mine)
802.1x Tab
Uncheck Use IEEE 802.1x network access control
All done!
Now make sure you have EXACTLY the same Network Key in your router and you should be good to go.
Now to connect to your PC & Laptops you use Resco Explorer 2005 (you'll need to buy it but worth every penny!) to MAP shares from your network.
How to is in This Thread
Worked for me, and I've only had my Mini S (my first PDA ever) a week!
Good luck!
Mark.
I just got my MDA Vario (same as XDA Mini S right?) today and the manual has absolutely nothing about connecting over wi-fi to *anything* let alone my home wi-fi router but I was pleased to find this thread , for a while
START->SETTINGS->CONNECTIONS->NETWORK CARDS
Click to expand...
Click to collapse
doesn't have a "wireless" tab (or any tabs for that matter) but it does offer me a list of adapters to let me modify settings (no option to add one though).
The nearest thing to wi-fi is "SDIO WLAN Wireless Adapter" but I'm pretty sure that would relate to something plugged in to the SDIO slot, and not the built in Wi-Fi hardware. Am I wrong?
I've fumbled around a bit and found one screen which offers a view where I might be able to enter the details you've given here, but the textboxes are all locked/readonly (empty) and I can't write anything in them.
I'm really disappointed so far.
the sdio card is the correct one, the wizard has an sdio wifi card inside I believe.
if you select network card under settings-connections you should be able to add a new connection there, if in doubt search for wifi connection, or post back here for more help, good luck
R
I got a PM about this thread, I thought I'd reply here to as the info could help others....In additon othres may be able to elaborate more on the 802.1 query
Mark,
I had the same problem regarding my mini s which you recently answered. I have a US robotics wireless router (9108) and connect it to my laptop (Thinkpad X31) using WPA-PSK and TKIP - the laptop does not allow me to check 802.1 which I understand is for large companies with a special server.
With my miniS I have found that as soon as I enter authentication WPA-PSK and encyption TKIP, the system automatically ticks 802.1 and I cannot access the page to turn it off.
I have tried communicating with O2 via email but they haven't really helped. What I want to know is whether on your machine with WPA-PSK and TKIP you can turn off 802.1 in which case mine has a fault and I can swap it - otherwise I have to find another smart phone!
Click to expand...
Click to collapse
Hi there, I'm a new user of these phones and understand little of Networking but I'll share my settings with you...
Under "Configure Wireless Network" I have:-
Under "General" Tab I have:-
Network Name: MyNetwork
Connects To: Work
Under "Network Key" Tab I have:-
Authentification: WPA-PSK
Data Encryption: TKIP
{Greyed Out} The key is automatically provided
Network Key:- ABCDE1234&*^ <- Whatever key you make up
{Greyed Out} Key Index: 1
Under "802.1x" Tab I have:-
Ticked use IEEE 802.1x network access control
(I can't change this.)
However on my domestic Netgear DG834G router everything connects just fine, g or b. Have you flashed your phone to the latest O2 firmware?
Mine is
ROM 2.21.4.1 WWE
ROM Date 3/9/06
Radio Version 02.07.10
Protocol Version 413.1.03
ExtROM Version:- 2.21.4.101
I hope this helps,
Mark.
PS. I'll post this in the thread too, it may help others.
hello
i recently purchased the xda mini s and a wifi usb adaptor. i am having trouble accessing the internet. my computer connects to the internet using ethernet to my wall (im not sure where it goes from there). i can connect my phone to a peer to peer wifi network but it does not let use the internet, could anyone help me with the settings please i would greatly appreciate it.
many thanks
harvey
To achieve that you need to set your primary connection as shared in network connections. Once you do that, adhoc mode should be possible without issue.
Please help - similar problem
Hi - I have an XDA Mini S and have connected without issue to the Internet via my router (Wirelessly of course).
The issue I have is that I cannot connect to any network shares on my PC. When I had a CF wireless card in my Ipaq I could do without issue. I have downloaded a ping proggy to XDA and can ping router but cannot ping the PC I have the shares on.
Normally (If I was using a laptop) I would check Workgroup/Domain settings, authentication credentials etc...nothing like this on XDA.
Please help
Wiggz
Quick - fix
I have spent hours messing around with this - however I have had a similar problem with a corporate laptop which wouldn't work.
I changed the router from WPA to WEP and bang - worked straight away. Exactly the same on my XDA Exec so should be same for Mini S (pocket PC 2005).
Hope this helps.
unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi for transferring files.
it shows the connections status excellent on both devices with ip address 169.254.72.236 on ppc and 169.254.130.63 on laptop.
i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.
MDA Wifi Wont Connect
Hi there-I have an mda vario which I was able to unlock as it was locked to t-mobile and I am with another network. After ages I was able to get a connection to my router or at least it says that it is connected. However I still cant connect to the net via wifi on my mda. I have put in the settings for wpa and wpa-psk, etc have unticked the 802.1x box etc but still no joy. Can anyone help?
Thanks
Morgas
Hi all, new here, thanks for the info posted, was useful but i'm still having problems with the wifi on my xda mini s to my netgear dg834gt router with sky broadband.
The problem seems to be that my xda finally connected to my broadband and router, but now when I try to use internet explorer on my xda I just get
"400 Bad Request"
"Bad filename."
Can anyone help with this? Thanks in advance

WiFi Connecttion

Hi Everybody!
I'm looking for some help with connecting to my home WiFi.
In settings, netwok card, I can see my home network.
I use a netgear router with WEP security.
I just can't seem to connect and I can't seem how to input my WEP acces passkey too?
Thanks for any replies
{>
In settings, wireless lan, advanced it states that I am connected to the network, but I still can't connect when using IE?
the message reads : " U~nable to obtain a server assigned IP address . . . etc"
Do you have DHCP enabled on the wireless router? Have you used the wireless network with another device?
Mmm, very good question!
The answer is "don't know". Will check and let you know Syn.
Will start again.now that I have managed to "flash my rom"
Well this is what I have :
Wireless Network
Name (SSID):
Region: --- Select Region ---AfricaAsiaAustraliaCanadaEuropeFranceIsraelJapanMexicoSouth AmericaUnited States
Channel: 01020304050607080910111213
Wireless Access Point
Enable Wireless Access Point
Allow Broadcast of Name (SSID)
Wireless Card Access List
Security Encryption (WEP)
Authentication Type: AutomaticOpen SystemShared Key
Encryption Strength: Disable64bit128bit
I have added the device to my wireless network list with the MAC address
Signal is VERY GOOD!!!
Am I missing out son some settings?
{>
I've tried to set up a new connection as Internet Explorer tells me it cannot connect with the current settings?
What settings do I need?
I have entered the WEP key, and I don't use passwords on my wifi system??
{<
Do I need an IP address?
Scutter
First things first, forget the PDA for few moments and lets establish what is going on with your AP. The question that [sYn] has asked is very important - do you have DHCP enabled on the AP. The answer you posted is meaningless as it only shows the options and not the current config. Interrogate the AP and look for where the LAN side DCHP option is and make sure it is set to ENABLE or ON or whatever positive indication is used.
Once you are sure this is configured (ideally tested with a PC) then go get your PDA and try connecting again. If it still doesn't work disable all the security and encryption settings and turn off that stupid MAC address authentication which, by the way, is pointless. If needs be do a factory reset on the AP. With no security enabled try conecting the PDA. It more than likely will connect now. Once it does start building up your security one layer at a time making sure you test at each stage. Can I suggest that you forget WAP and MAC authentication and use a WPA Pre-Shared Key instead as this provides bucket loads more security.
Hope this helps.
JT, thanks for all your help!
I use a netgear router. Whilst awaiting a reply here I did a bit of research and took of the security of my router. I then connected my device using a shared key (I have always had this) and then put the security back on.
I had to reconnect my laptop too. I think the reason isthat the router was set for an automatic setting and I chaned this to an open system.
THANKS AGAIN FOR YOUR HELP !!!
{>

wi fi woes :(

hi guys, any help you can give is realy apreciated,
ive never used wifi before on my exec or in a home network so treat me as a beginer. ive got a pci wifi network card and i am trying to set it up so i can use my mda pro when i am at home. my computer is currently connected to my housemates wired network which is a simple set up
bb modem......
......|..............
....router........
..../....\..........
my.....his.......
pc......pc.........
like i said nothing fancy, i installed the network card which went fine and bridged my network connections together as advised by my large local computer retailer. my computer asked me to provide a name and network key so i did. my pc is now connected to my mda pro.
and in the wifi it displays
main
status connected to network
ssid: cusnet *thats what i entered as my network name*
tx rate:auto
mode: ad hoc
channel:6
bssid:00-71-0e-71-29-00
mac:00-09-2d-52-4d-66
ip:169.254.156.219
settings
half in power save
turn off not on
leap
nothing entered
...............................
every so often i get the following
*unable to obtain a server assigned ip address, try later or enter an ip address in network settings*
i cant get any internet based app to work and i am asumeing its due to the settings, any help is gonna be soooo apreciated
i dont want to subscribe to wifi in the city if i cant get it working in my own home lol
any one think this might be a network problem ?
ive posted a few questions on network forums but no reply yet
i am lost
:?
From the info that you have given, it looks like your universal is getting an incorrect ip address. What you need to do is check what your desktop ip address and gateway is. Then give your universal and ip in the same range as the desktop ip and also add the gateway to your device. It should wotk this way !
The best option would be to get a wireless access point instead of the wireless network card and set things up like this.
....bb modem......
...........|..............
........router........
..../......|......\.............
my...access......his......
pc......point.......pc......
The wireless access point plugges directly into the router rather than connecting through your PC.
If you don't fancy the above setup then you could use internet connection sharing. You'll need to remove the bridge between your network cards and ensure that the router,your PC and friends PC's isn't using 192.168.0.x IP addresses.
Then you can select ICS (tick the allow other computers to access internet...) on your network card's (one to the router) advanced properties and select your wireless NIC as your home network connection.
I hope this isn't too heavy I've resisted the temptation to start talking about subnets, NAT, DHCP and all the other networking terms.

Categories

Resources