Be aware that when i flashed the test rom found on the wiki i ended up with a white screen and the PPC refused to do anything ,to get out of this mess i had to put it in bootloader and then flash the stock HTC rom.
sammis said:
Be aware that when i flashed the test rom found on the wiki i ended up with a white screen and the PPC refused to do anything ,to get out of this mess i had to put it in bootloader and then flash the stock HTC rom.
Click to expand...
Click to collapse
Can you point me to that "test rom"? I cant find it anywhere at all.
Cheers,
Chris
It used to be on the wiki,but now i can't seem to find it anywhere.
I'll see if i still have it in my PC and will post a rapidshare link asap.
Related
Does anyone have, or know where I might be able to find a Rogers WM5 ROM for the TyTN? Is this even possible to find or am I SOL?
I'm looking for one also
Same here.. I would like to have one onhand just in case something goes wrong with my phone and I need to send in for repairs.
I have the WM6 Rom from HTC's official site installed right now (working perfectly by the way), and not too sure if Rogers would support a return if something went wrong.
Thanks
i just got my new rogers tytn today. I was planning on making a backup and updating ROM. if this is WM5 i will post backup file once I figure out how to do this.
That would be awesome as I am sure lots of here would appreciate a backup incase of warranty triggered
Alright... so I am going to get to this tomorrow morning - but I have no clue how to backup the existing ROM. I see a lot on how to install a NEW ROM, but nothing that I can find about the backup.
Can somebody guide me in the right direction so that I don't screw this up! LOL
Thanks
baxster said:
Alright... so I am going to get to this tomorrow morning - but I have no clue how to backup the existing ROM. I see a lot on how to install a NEW ROM, but nothing that I can find about the backup.
Can somebody guide me in the right direction so that I don't screw this up! LOL
Thanks
Click to expand...
Click to collapse
Bump......
If I am not mistaken somebody has already done this.
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
I will just have to find out how I check which one i have.
Is there somebody that can do this to the Rogers ROM?
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoReconstruct
I believe that will do what you need in order to flash the original ROM back onto your device.
My brain is getting sore from all of the reading about all of this. Sometimes I think life would be easier if I wasn't a "geek".
I'm probably a newb to this, but I've managed to create my own rogers ROM and have it successfully work. The only thing missing my own precompiled ROM was the Rogers splash screen and the Radio which is suppose to be 1.42...
If there is somewhere I can upload the packaged Rogers ROM please let me know and I'll quickly upload it for everyone.
the files in the Rogers rom are all RAW files. how do you load it to your device?
kintaro said:
I'm probably a newb to this, but I've managed to create my own rogers ROM and have it successfully work. The only thing missing my own precompiled ROM was the Rogers splash screen and the Radio which is suppose to be 1.42...
If there is somewhere I can upload the packaged Rogers ROM please let me know and I'll quickly upload it for everyone.
Click to expand...
Click to collapse
Please post a link....really interested in playing with this one.
Rogers Rom file WM5
here is the rogers original wm5 rom , you can flash your TyTn hermes with it.
it was cooked by me.
http://www.mediafire.com/?1vl2xe515s9
Has anyone extracted the secondary splash screen from the rogers original wm5 rom?
ziadsa said:
here is the rogers original wm5 rom , you can flash your TyTn hermes with it.
it was cooked by me.
http://www.mediafire.com/?1vl2xe515s9
Click to expand...
Click to collapse
I'd love to restore my tytn from 6.1 to wm5 (so i can enable call name display) . The link you posted is unavailable . Can you re-upload please?
Thank u
aliencurv said:
I'd love to restore my tytn from 6.1 to wm5 (so i can enable call name display) . The link you posted is unavailable . Can you re-upload please?
Thank u
Click to expand...
Click to collapse
nm . it seems to be working now ... mediafire was being wierd last night .
btw, thank u for cooking that rom
i double checked the link, all is working fine.
Enjoy it.
Thank you, thank you, thank you!
ziadsa said:
here is the rogers original wm5 rom , you can flash your TyTn hermes with it.
it was cooked by me.
http://www.mediafire.com/?1vl2xe515s9
Click to expand...
Click to collapse
ziadsa, thank you very much. I am looking at moving to a new phone, even though the TyTN has served me well, so I want to pass it on in original condition. Of course, I will be pointing the new owner to xda-developers. The next owner may want more from the phone, like I got.
Rogers splash screen
BoldFace said:
Has anyone extracted the secondary splash screen from the rogers original wm5 rom?
Click to expand...
Click to collapse
I now have the original ROMs back in place and it works beautifully, but the splash screen still shows PDAviet.
Does anyone know how to correct this and get the Rogers screen back in place? I know this forum has been quiet for a long time, so if I don't get a response here, I will try with a new thread.
Thanks in advance.
Glen
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2
Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????
no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---
Hi,
I have a HTC P3350 and am quite bored with the current look and feel of it, is it possible to upgrade it to 6.1 PRO. Please guide me.
Thanks
Yes it is.
Just search in the forum the Artemis ROMs. You can flash all of them.
They work the same on your Love. Don't forget to READ and flash USPL first.
Cheers
HI,
I tried using "Artemis Touch 4.01 Full with 4 sided cube", which i found somewhere in this forum but i dint find the results more attractive and moreover my phone has become slower than ever before. Is there any way to revert back to the previous version cause i am unable to install the ROM you have suggested in the link above??? It says that the image is corrupted. Please help me out.
Thanks
XDA Taher said:
HI,
I tried using "Artemis Touch 4.01 Full with 4 sided cube", which i found somewhere in this forum but i dint find the results more attractive and moreover my phone has become slower than ever before. Is there any way to revert back to the previous version cause i am unable to install the ROM you have suggested in the link above??? It says that the image is corrupted. Please help me out.
Thanks
Click to expand...
Click to collapse
I didn't sugested any ROM.
You can't revert to your old ROM. There isn't any shipped ROM from P3350.
Flash other ROM that you like.
Hi,
While trying to install the ROM available here "http://forum.xda-developers.com/showthread.php?t=378535", it returns with an error saying "Image Corrupted" once it reaches the 3% mark. What du i du???? Please HELP...
Thanks,
XDA Taher said:
Hi,
While trying to install the ROM available here "http://forum.xda-developers.com/showthread.php?t=378535", it returns with an error saying "Image Corrupted" once it reaches the 3% mark. What du i du???? Please HELP...
Thanks,
Click to expand...
Click to collapse
I faced the same proble....Only solution u have to flash back to your own factory rom first before trying anything else.....
try to find in this....http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
Thanks for the timely reply.
I have now installed "achilles_ROM_ver_3_YouTube" and works pretty nice, but the problem now is that i am unable to send or receive files via bluetooth, any suggestions?
Thanks.
I haven't used my Touch HD in a very long time and when I turn it on now (dont remember what happened) it says upgrade ROM code error please try again. Does HTC have an upgrade for it? I live in the US and their site doesn't show anything about the phone, used europe site but gave me a no updates for that serial number. I am guessing that a stock ROM from HTC would fix this problem as the phone is not unlocked.
Shipped roms can be found here. Hope this helps.
If you receive "Upgrade ROM code error" then you will need to flash original stock rom which was on your device, i.e. not any stock rom but the original one. Your original stock rom should flash whether it says 'usb' or 'serial' at bottom of bootloader.
Link to stock roms has been provided in post above
Thanks
Thanks a lot, I haven't used that phone for probably a year so I hope that fixes it. I cannot wait to use that phone again, since I paid good money for it.
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
make007 said:
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
Click to expand...
Click to collapse
Did you follow this guide and put either USPL or HSPL on your device first?
Before flashing anything, its always best to read the stickies (thread stuck at top of each forum which provide guides, references etc). My advice would be to read this
I need to send my Tmobile HD2 phone back to HTC for repair since my touchscreen isnt working anymore. Anyways, I need to uninstall the HSPL and install the stock / Factory ROM as if it came when brand new. I have been searching on this forum but I havent had much luck. Where can I download the stock rom? I looked on the htc website but I couldnt find it.
Also as for uninstalling HardSPL, I understand all I have to do is to flash the stock rom from the sd card and that will put the orig SPL back on, correct?
I think hspl2 lets u install spl .. And you can go to www.htc.com and enter your s/n..
In the folloing link you will find all the kinds of stock roms. Click Here.
sudeep6258 said:
I think hspl2 lets u install spl .. And you can go to www.htc.com and enter your s/n..
Click to expand...
Click to collapse
Thanks but I can't find anywhere on the htc.com to input my s/n and find the rom. Can you point me in the right direction?
It's been a while, so I may be remembering wrong, but I'm pretty sure the last official ROM I downloaded came right from T-Mobile's site.