I have SNN 3.1 loaded onto my Wizard and I can't connect to the internet at all. I'm not sure if it's a setting I did or it's been like this since I installed SNN 3.1 . It's not connecting through Wifi or Edge at all.
Someone please help, I wanna be able to surf through wifi again.
I'm able to connect through a USB connection to my computer, but not through wifi. I've just installed AMP and it's the same there. I had the v2.19.11 radio rom from the T-Mobile UK and went back to the v2.25.11 radio rom. That didn't change a thing.
Every time I try to surf through my wifi IE says unable to locate. Now that I think of it, I may have never got wifi to work. Might have accidently used Blue Tooth through my PC to surf the net.
I need serious help please.
Doing a hard reset fixed the problem.
Related
i read pages of threads on this forum, but im not getting nowhere fast!
I'll start at the begining, mda t-mobile original rom, working as it should, upgraded the rom several diff ones and not working, tryed the origainal rom and not working!
rom now on the mda,
ROM version 2.8.7.1WWE
radio version 01.13.10
protocal version 4.0.13.24
ExtROM version 2.8.7.101
ive intsalled DJVW WLAN 302.11g Activator 1.0.cab
Now the problem, when the wifis switched on it takes awhile to even detect the network, my old ipaq would be conected as soon as switched on?
when it does detect the network it trys to conect for about 2mins then gives up ( in same room as router )
it wont conect but i can see the mda has downloaded about 20kbs of info, but can get no further?
Am i missing something here?
Also where do you go to check you have the latest drivers, updates, newest rom etc
Thanks for taking the time to read this :wink:
Hello,
I have found that i am having similiar problems with Wifi after updating to the latest qtek 9100 ship ROM on my qtek 9100 device.
the device can "see" the WIFI but it will not/connot "use" it.
Ya same here. I can turn on the wifi but it doesnt connect anymore ! I know fopr sure that there are at least 4 wifi connections around me normally but I dont see any of them !
I had this problem but was able to fix it by giving my router my DNS settings (that I got from my ISP).
For some reason, certian routers will not serve the MDA with any sites unless it has the IP address of your ISP's DNS server.
This should take care of your problem.
If this doesn't work, go to your public library and see if you can get on their wifi. This will help you troubleshoot to see if there's actually a hardware problem.
Actually the problem i had is unusual in that i could connect to any open WIFI zone aswell as our work and home one, BUT it will not carry any traffic AT ALL. Only uses GPRS NO wifi.
I actually hard reset the device yesterday and ensured that Push email was switched off - WIFI is functioning fine now.
There is still one problem. When i cannot the device to my PC for an active sync. It will sync with the PC but throw an error when trying to sync with exchange server via the WIFI.
The error on the PC active sync is
"The server could not be reached. This can be caused by temporary network conditions
SUpport code:85002003"
It also throws an error on the device.
This is a right pain and did not happen on the previous version of the ROM. It means i have to do a seperate exchange server sync when disconnected from the PC. ANyone have ideas on how to fix this.
Incidently, another thing I have noticed with the NEw ROM is that contact lookup is noticeably slower - sometimes I have to wait for a few seconds
before the contact i am searching for actually comes up. This is in comparison to the immediate results of searches in my old ROM.
Jass
right ive reload a rom, and the wifi works, then after adding each of my aplications, ive tested the wifi conection, i found wififofum being the problem.
now i know the developer of wififofum has an wizard himself , that runs this aplication no problems, ut on mine it seems to just freeze the wifi, giving a rssi signal of 90 no matter how close or far im from the source?
http://img.photobucket.com/albums/v12/XRfil/mdawifi.jpg
Hello,
I have the Orange M700 which I modded to Mun's rom (TE) the other week, all went well or so I thought.
Tried to connect into work from home for the first time last night and even though my wireless is on and connected the damn phone keeps insisting that it tries to connect under gprs.
What on earth is causing this, I have everything set to use the WiFi (I think) but it just refuses. It will surf the net normally under WiFi and won't even think about using the gprs - it just does that for the vpn connection.
Any ideas would be very helpfull, I'm at a loss.
1st, let me say that I use WMWifiRouter religiously for the last 6 Months as my ONLY source of internet at home, as I cannot get DSL or Cable where I live.
Having said that, I woke up the other day and could not connect at all. At first I thought this was a wmwifirouter issue, but no matter how many hard-resets I do I cannot connect to the (or any) Add-hoc network connection on my phone. I installed Alltel's WM6.0 Update about 4 days before this happened, and I did have wmwifirouter running after the upgrade.
- I can ICS via USB
- I can Sync via Usb AND Bluetooth
- I can connect to my Home Wifi Network
- I have done a Hard Reset and ONLY installed the wmwifouter
- I have done a hard Reset and ONLY setup an Add-hoc Network
- When I turn the wifi hard switch ON it comes on, and I CAN connect OUT via wifi to my home network.
- I Cannot connect TO my phone on a wifi connection.
I assume this is a hardware issue, but I need some input on what to test so I can either Fix it, or explain the issue to an Alltel Tech so I can get the phone replaced.
Any help is extremely appreciated.
long and short of it, i'm trying to connect the HD to another device (Hermes) to share internet via bluetooth, and its not having it.
I've gotten my pc to connect, but i can't figure out how to get this up & running on the HD.
The steps i've taken:
With WMWifirouter
Setup the Cellular to Bluetooth Connection
Paired the HD to Hermes
result: no internet connection
(it briefly shows as being connected , then quickly goes back to waiting for connection)
but i've realized that internet explorer is trying to access connections settings
So i go to Connections, Add a new modem connection , select bluetooth as the modem, try to add a new device, it sees the Hermes, try to connect, it shows no services, and when you select save, it brings me right back to the add a new device page....no saved connection w/ the hermes...
Bear in mind i can still send files between the devices (Hermes & HD) showing they are paired. (and of note during this time, the bluetooth status in WMwifirouter goes to connect, and then after the file has finished being sent goes back to waiting for connection)
Trying to use ICS, is more of the same...as in exactly the same...add the device, no services, never saves.
I've tried installing the wm6 DUN found here on both devices, no go.
I am desperately hoping that someone has some words of wisdom to share with me.
What am i doing wrong, and has anyone successfully gotten this to work on an HD.
I was originally running Dutty's 2.5 when i first tried this, and at the time thought it might be an issue w/ the rom, so flashed back to the stock rom , but its made no difference.
Eagerly awaiting your help
Tiger
Hi guys.
I just tried flashing Duttys Leo Multi-Lang V1.1 ROM.
Actually I decided to sync my contacts before flashing but the GPRS connection wouldn't work then. I didn't think too much into it since I had just used it a couple of hours before without problem, and though it was some soft reset issue or something.
However, I tried flashing to the rom and the procedure went without any trouble. But I can't get my GPRS connection to work anymore. I tried flashing back to stock 1.48 which didn't work either, and after that I flashed back to the original stock 1.43 roms.
No matter what I do I can't get internet and my GPRS to work anymore.
I tried putting my simcard in my old SE P1i and I could connect to the GPRS and surf the net without any issues.
This leaves me to think no other than that something has happened to my beloved HD2.
I now have 1.43 ROM and I uninstalled the HSPL, so I don't think there should be any issues sending it in for repair, but I wanted to check with you guys before. I rather not send it in
Any ideas?
I've had exactly the same problem and just reported it to HTC. My battery almost ran flat yesterday but I didn't pay attention and just assumed that I'd left something running. I soft reset the phone and put it back on the charger for a few hours, took it off and then left it overnight. When I went to use the phone again today the battery was completely dead. I charged it up again and then left it to see how quickly the battery was discharging. I noticed that the phone thought I was in the Punjab but didn't realise that I didn't have an internet connection because the taskbar said I was connected via HSDPA. I ended up doing a hard reset as I assumed the battery problem must be software related.
After the hard reset I noticed that I didn't have an internet connection but assumed that it was an aberration and connected via WiFi to set the phone up again. To cut a long story short, I eventually realised that I could only connect to the internet via WiFi despite the fact that the taskbar still said I had an HSDPA connection. I tried a couple of hard resets and even reflashed the ROM to 1.48 but whatever I do I can't connect to the internet through my phone provider. I can make calls and I can connect via Wifi but I can't connect via HSDPA.
I don't know why this happened really, but after trying this and that it worked out for me.
What I did was, I turned off the 3G and tried to surf through G only.
That worked, then I tried to turn on 3G and surf and it also worked again.
I then tried to do a soft reset and tried to surf and again, it didn't work.
So I turned of 3G and tried to surf on G which worked, and when turning back to 3G I could again surf.
Ofc it would be lame to be forced to turn off 3G and surf 1 time before one can surf on the 3G every time one does a soft reset, but for some wierd reason it works now without the need of turning 3G off.
I hope this can help you a bit and hope you get ur mobile working well soon again!
Thanks umiss. Out of interest, how do you force the phone to only connect via GPRS?
My problem is getting weirder and weirder. It turns out that I can connect to the internet via HSDPA when I'm at work but not when I'm at home or around my home. This is despite the fact that my phone still says that I have a strong HSDPA connection at home.
I also tried popping my SIM card into my old N95 and I have no problems connecting to the internet with that The only thing that's giving me a bit of hope is that my partner's SIM card (she's on the same network as me) struggled to connect to the internet in my phone too so I'm hoping that it's related to a network problem in my area.
I only have G/3G connection so GPRS is the only choice for me to connect to the internet. (Or maybe I mixed 3G and GPRS being the same?)
Anyhow, I connect through my 3G connection.
It's weird why this problem happened, and how it by itself solved (maybe me switching to G instead of 3G helped but I don't really know).
However, regarding your problem.
You say that you don't have any problem connecting to internet (through HSDPA I presume) with your N95? But if you connect with your HD2 it doesn't work.
Furthermore, with your friends SIM it also doesn't work with your HD2.
This obviously sounds like theres an error with the phone rather than the network?
Specially since it worked with your N95. Could you maybe try your friends sim in your N95 to see if it works?
But then again, how weird isn't it that your phone works well at work :S
Did you try forcing your phone to go into GSM to check if internet works?
Please try this and keep me updated, I would really like to know if this somehow helps solving this "problem" :S