Has anyone got a cab for the diamond version of the transcriber? Ive tried ALL the others I can find via searching but none seem to be the same version which comes with the standard diamond roms, Ive found it runs perfect (recognition) for me and would like to be able to include it when running other peoples custom roms.
did you ever find an answer to this? (I found this thread doing a search on transcriber .cab) thank you
what the previous poster said x 2
ratcom said:
Has anyone got a cab for the diamond version of the transcriber? Ive tried ALL the others I can find via searching but none seem to be the same version which comes with the standard diamond roms, Ive found it runs perfect (recognition) for me and would like to be able to include it when running other peoples custom roms.
Click to expand...
Click to collapse
Try the one below, from Suiller's collection - he stripped the Diamond down to BONES, literally.
http://diaduit.bounceme.net/SysTranscriber.cab
I hope it works for you
much thanks for v quick reply - it always drives me nuts, every time I re-flash, finding a transcriber cab that actually works with the new ROM I much prefer scribbling a whole sentence to tapping/carving out letter by l a b o r i o u s letter
ETA: not work oh well thanx for trying!
I finally found this one lurking on a quiet part of my home drive; it's worked with every ROM I've tried it with so, with thanks to jasjamming, I'm attaching it.
Thanks man.... thanks for sharing....
Related
OK BeeJive has released Jivetalk (alpha) for WinMo6.x pro devices
It is truly a marvel on my Hermes(Cingy 8525)
Heres my issue I cannot get it to run for the life of my on my Herald(tmo wing)
I have tried several roms and it wont work
Open Touch, Touch-IT, and another i cant remember at this time
I want some other Wing users to see if they have the same issue also
Also I will post some screenshots to make your mouth water!!
yeah i have open touch 4.0 lite and it doesn't work, fails to startup. when i had the original tmobile rom on my wing, it worked.
The JiveTalk cab of yours work perfectly on my O2 terra, a Herald variant.
Used to use Palringo until today but JiveTalk seems to take over that place, thanks btw
I checked out the Jive site and there you could make a HTC P4350 and a T-Mobile Wing selection.
I'm not sure if this is just a marketing questionaire or a hardware id related question field.
Which version did you pick?
When I login to various IM networks the status messages is "On HTC P4350",
my assumption is that it could be hardware related.
Try if selecting the Wing version makes a differences if not try to use JiveTalk over WiFi,
because your mobile carrier might block the appropriate port via proxy.
CONFIRMED
ultraman69 said:
yeah i have open touch 4.0 lite and it doesn't work, fails to startup. when i had the original tmobile rom on my wing, it worked.
Click to expand...
Click to collapse
FLASHED BACK TO TMO ORIGINAL (on my HERALD)
And it worked like a charm
This app is tht HOTT to me
I cant understand why it wouldnt work with the custom roms though
Make a ROM cooker cn shed some light on that
PS: Your Welcome Gambit.
I figure get it while its free!! because one day it will cost $
Im keeping a copy of every version, but i believe on first startup it will authenticate to jivetalks server first so that maybe frivolous
UPDATE
Now WORKING on Binky11's v3.3 ROM (On my Hermes) ALSO!!!
VP3Gv3.62 WORKING
Working on Vp3G 3.62 Hermes ROM!!!
looks like v 0.5.2.13 is out, it is still not working for me on ot4 lite. getting a typeloadexception, anyone have any ideas?
ultraman69 said:
looks like v 0.5.2.13 is out, it is still not working for me on ot4 lite. getting a typeloadexception, anyone have any ideas?
Click to expand...
Click to collapse
The roms it doesnt work on are because they do not have SQLCE cooked in
Must be "cooked in" for jivetalk to work
Works on all Binky11's ROMS and all vp3G's as well
SQLCE and .NET CF are both required for JiveTalk to work.
I haven't managed to get Jivetalk to work on my phone, after trying to install everything... still errors every time...
duprade said:
SQLCE and .NET CF are both required for JiveTalk to work.
I haven't managed to get Jivetalk to work on my phone, after trying to install everything... still errors every time...
Click to expand...
Click to collapse
Same here. Got .NET CF 2.0, 3.5 and SQL CE installed and still no luck.
Itje's 7.1 ROM was the the last ROM JiveTalk could run properly.
Anybody know how to enable the today plugin for the newest JiveTalk? It's not under start>settings>today>items.
you have to download it separately. after you do that and install it will show up where the normal today plugins show up in that list. it shows up for me.
does anyone know where it saves logs? or how to delete them? i think they are taking up a lot of my memory, i only have 3.2MB left and i am not putting ANYTHING on my phone and cleartemp clears like 500KB
Care to show me the download for the today plugin because it's nowhere to be seen on there site =O?
i couldn't begin to tell you where it is. the only reason i know about it is because when i updated it told me i can either edit a css file (or something) to have it work or install the cab that will automatically add it.
just checked, i don't have the cab anymore.
has anyone gotten it to work with cooked roms?? im using heralds serg's rom?? thanks guys!!
I went back to the OEM and got the today plug-in back. It is working fine on my ROM (for the Kaiser).
i emailed bee jive people and they told me it should work on custom ROMs.
however, i have a tmo wing running on papa black diamond but it doesnt work however many times i tried it. i used to have it on my blackberry and it is really the best messaging software out there
**EDIT - i found a solution to the problem.. follow instructions and install the following from this topic:
http://forum.xda-developers.com/showthread.php?t=370772
Unbelievable...
thanks cbbplanet, I never thought I would ever see JiveTalk running on Papamopps' ROM.
I know it runs out of the box on Itje's, ICP's and tttrans's ROMs, but i never got it to work on this one.
Perfect, you made my day
cbbplanet said:
i emailed bee jive people and they told me it should work on custom ROMs.
however, i have a tmo wing running on papa black diamond but it doesnt work however many times i tried it. i used to have it on my blackberry and it is really the best messaging software out there
**EDIT - i found a solution to the problem.. follow instructions and install the following from this topic:
http://forum.xda-developers.com/showthread.php?t=370772
Click to expand...
Click to collapse
NIIIICE
Alas we have upgraded to KAISER's
But good to know !!
Anyone know how to make it work with tzones proxy?
smanzor88 said:
has anyone gotten it to work with cooked roms?? im using heralds serg's rom?? thanks guys!!
Click to expand...
Click to collapse
Works fine on mine, using opentouch 5.1
well
i tried many " cab " , but all of them had some problems
so is there any which work perfectly???
I tried a couple of .cab installs of TF3D but had similar frustrating problems. So I bit the bullet and installed Jack's v1.06 ROM [ http://forum.xda-developers.com/showthread.php?t=445818 ] and it's incredible. Very fast, stable and looks great.
I think it's the only way to get this properly working on the X1 for now.
What is the difference between it and the standard rom? The stuff it adds are available from apps
dadeadman said:
What is the difference between it and the standard rom? The stuff it adds are available from apps
Click to expand...
Click to collapse
If you read the first post in the thread, you'll see what the difference is
So if i dont really need the extra memory freed up by the removed portions, the rom is as good as generic?
mmmm
thanx for this help
but actually i was only looking for adding it like a software
more than changing my rom..
so i think i have to wait bit more , maybe one can do it
Touch-IT TF3D works quite well for me. better than the FullHDManila cab...don't asky why.
derliebewolf said:
Touch-IT TF3D works quite well for me. better than the FullHDManila cab...don't asky why.
Click to expand...
Click to collapse
could you please link the page that you download the Touch-IT TF3D? There seems to be so many cab. files that it is so confusing which cab. to download. thanks
look no further than here: http://forum.xda-developers.com/showthread.php?t=441439
Does anyone know where i could get a cab installer for the diamond keyboard from the 2.03 ROM? I've run a search but looks like all extraction projects have been abandoned
halp!?
search
search for the hd kbd in diamond forums, i found mine there, if like the the large keys one go for the `st` version (stands for stock)
wycked.ninja said:
search for the hd kbd in diamond forums, i found mine there, if like the the large keys one go for the `st` version (stands for stock)
Click to expand...
Click to collapse
i couldn't find the one i was looking for...i'm after the tiny one off the diamonf 2.03 ROMs you know the one? its about half the size of the ones i found whilst doing that search - link me to the site/thread plz...
im lookin for the same keyboard too, mainly to fix the landscape bug with the hd keyboard. if anyone could provide a *.cab, it would be much appreciated
You search for this?
RichardTenggren said:
You search for this?
Click to expand...
Click to collapse
Actually i have searched a number of times with no luck. Just installing that one there now to see if it's the one i've been looking for...and it is! Thank you
thank you SO much
Hi guys,
Ive downloaded Touch-ITs very good touch flo and so started to download other programs. So far ive done the keyboard and that works a treat.
Problem is ive downloaded the mp3 trimmer and social network engine installed them but cant find them anywhere...how do i access them? can these be used as tabs on the touchflo screen as i really like the interface?
x1fan said:
Hi guys,
Ive downloaded Touch-ITs very good touch flo and so started to download other programs. So far ive done the keyboard and that works a treat.
Problem is ive downloaded the mp3 trimmer and social network engine installed them but cant find them anywhere...how do i access them? can these be used as tabs on the touchflo screen as i really like the interface?
Click to expand...
Click to collapse
mp3trimmer already comes WITH itje's rom. no need to install it again. which "social network engine" are you talking about?
you'll find all programs if you click "start" (upper left) and then "all programs" (lower left).
I used this thread http://forum.xda-developers.com/showthread.php?t=442154 to get the cabs and installed them. Cant find the option to trim MP3s at all. and i downloaded the Touch-It Blackstone Social Network engine. Any ideas?
Im hoping that by downloading the engine that the social networking sites would pop up under the internet tab where youtube is...you know where i mean?
oh, my mistake. you installed the cab and not his rom with manila cooked in...
okay, i'm sorry, but i never used stock rom with manila-cab. but i can tell you this:
- manila works best if cooked in, use a custom rom (i.e. itje's touch-it v.10. but there are many good roms, have a look in the rom-developing-part)
- the cab you used is from november 2008, there's a newer version out now
- "social engine": never saw it in the internet tab, it connects your contacts with a corresponding facebook-friend.
so, bottom line:
programs should show where i told you above, even in the cab i think. and: manila as a cab is slow, cooked-in it flies these days.
caliban2 said:
oh, my mistake. you installed the cab and not his rom with manila cooked in...
okay, i'm sorry, but i never used stock rom with manila-cab. but i can tell you this:
- manila works best if cooked in, use a custom rom (i.e. itje's touch-it v.10. but there are many good roms, have a look in the rom-developing-part)
- the cab you used is from november 2008, there's a newer version out now
- "social engine": never saw it in the internet tab, it connects your contacts with a corresponding facebook-friend.
so, bottom line:
programs should show where i told you above, even in the cab i think. and: manila as a cab is slow, cooked-in it flies these days.
Click to expand...
Click to collapse
I am LOST, however up for installing whatever makes it run that little bit smoother! I like the look of manila i am using now but if there is an upto date one then i can give that a go.
I havent found the ROM you suggested but will keep looking, the first thread i came across (the main one) seems to have the download links removed, any ideas?
Thanks so far mate, youve been a star
Ahhhh think i have found the ROM now just waiting for the file to download now for the installation...
Trying to enter bootlegger mode and all im getting is the coloured screen, try to connect to PC but doesnt do anything, just stuck on coloured screen.....
x1fan said:
Trying to enter bootlegger mode and all im getting is the coloured screen, try to connect to PC but doesnt do anything, just stuck on coloured screen.....
Click to expand...
Click to collapse
typing this from my mobile, so to keep it short:
- you need to apply "hard-spl" first to flash a custom rom (it's a sticky)
- if you're flashing itje's v.10.2, be aware that there is a bug for some people with sending sms. i NEVER had it though. also you'll need to apply 2 or 3 fixes.
- READ READ READ!
if you're going to flash ANY custom rom you'll have to learn a lot. "just install and everything's perfect" won't work. and everytime you flash a new rom you'll loose all data on your phone, so make backup first!!!
if you're willing to get into this - do it. it's worth it and it will really improve your x1. if you want to have everything working out of the box with many restrictions - apple makes such a device...
Ill let you know how i get on, im just loading 10.2 now so we shall see
x1fan said:
Ill let you know how i get on, im just loading 10.2 now so we shall see
Click to expand...
Click to collapse
have fun then.
hope you did a backup of your data - if not, don't come yelling if it's all gone...
edit: the fixes needed
since the thread on v10 is pretty much to read (it started as v7...), for starters the 3 fixes needed with this version.
- Advanced Network (found in itje's first post, under the dl-link for the rom itself)
- "v10.2_corrected_highlights.zip" (also posted by itje, somewhere in the thread, search for it)
extract the files in these two zips to your \windows-directory (on your x1) with total commander (comes with the rom)
- v10.2_smaberg_1_percent_battery.cab (install normally. this fixes a bug that the battery-meter always shows 100% full. alternatively you could install another icon-set from this forum. watch out if they're for WinMob 6.1 or 6.5 though!)
the cooked-in build of opera mobile 9.5 doesn't work with the hardware-keyboard of xperia. either install build 16194 (iit's from an official x1-rom) or try opera mobile 9.7 beta.
every other question you should ask in the thread of the rom you've chosen.
this should set you up, from here on it's all tweaking, lots of reading, learning and adding apps to your likeness.
i have a problem like this one: i installed the touch it manila cab and then i installed the touch it htc album but... i cannot find the program... what do i have to do?
EDIT: ok i found two exe files in the windows folder wich are : HTCAlbum.exe and AlbumSearch.exe, and when i run each of them i have HTC Album... btw the problem is that i have no text in the menus... what may be the problem?
Thanks for all the advice guys...im installed and up and running and so far so good, no issues at all, the sms seems to be working fine etc.
Ill apply the fixes as noted so far as and when i come across the issues!
Cheers again all
caliban2 said:
- v10.2_smaberg_1_percent_battery.cab (install normally. this fixes a bug that the battery-meter always shows 100% full. alternatively you could install another icon-set from this forum. watch out if they're for WinMob 6.1 or 6.5 though!)
Click to expand...
Click to collapse
I cant find this CAB
jup, sometimes the search function takes getting used to... here you go.
caliban2 said:
jup, sometimes the search function takes getting used to... here you go.
Click to expand...
Click to collapse
Mate i looked everywhere, searched forums and then even threads but couldnt locate the cab, im slowly getting used to the site and where to find things so hopefully wont be pestering too much soon
Thanks again
-=W1S3=- said:
i have a problem like this one: i installed the touch it manila cab and then i installed the touch it htc album but... i cannot find the program... what do i have to do?
EDIT: ok i found two exe files in the windows folder wich are : HTCAlbum.exe and AlbumSearch.exe, and when i run each of them i have HTC Album... btw the problem is that i have no text in the menus... what may be the problem?
Click to expand...
Click to collapse
still nothing for my missing menus text problem?
Chaps,
Have searched in the Hermes forum but no joy. There is a thread in the Leo forums but it doesn't tell me what I am looking for.
Has anyone successfully used this keyboard on a Hermes? If yes how did you get it to work?
I simply get a blank screen when I tap into it.
Your comments appreciated.
Thanks
WB
Swype link: http://www.swypeinc.com/product.html
Is it WM6.5 only?
Mike
Mike,
I don't know is the short answer. I am using WM6.1 and simply assumed that this would work in a 6.xx rom.
I will hop onto their website to see if there is any substance in your theory. Would be surprised if there is as they would be doing themselves out of a significant cut of the market. After all 6.5 only got officially released a few weeks ago!
Thanks for the input though.
Anybody else?
WB
PS: Hmm, you might be right Mike. Their forum seems to suggest that it only works in 6.5. Great keyboard but having to load up 6.5 to run it is not an attractive option.
Pretty loath to destabilise my rock solid stable device. Will have to look for an alternative that is similar in concept.
WB
I've got it working no problems on mine. I'm running CRC's 13.4, which is a WM6.1 rom. I am using the QVGA cab from here.
It seems totally stable, and is by far the best keyboard I have come across.
Jez,
Thanks a bunch. I managed to find that thread about an hour ago but appreciate the input.
The qvga version works like a charm! Can't believe how quick one can be using this.
Word of warning; will only install onto main memory so make sure you have some space to do so.
Cheers
WB
Now you've got that solved, I think I'll try it as well
Mike
Let us know what you think. I love it as you can use it either as a traditional tap keyboard, a slider or both!
Only small issue for me is I make mistakes when I am tired as I can't always remember where the letters are on the querty keyboard as I do the slide (lol).
This, even though I have been using querty for donkey years
Enjoy.
WB
The link for the cab has gone
It does look a very good app and I hope they bring it out soon so I can try it.
Look for an app called Shape writer...
ultramag69 said:
Look for an app called Shape writer...
Click to expand...
Click to collapse
Thank you for the link
I think I will get some info on this as it looks very good.