!!!!!!!!!!!!Artemis Help Please Please Please USPL and Hack touchflo etc!!!!!!!!!!!!! - P3300, MDA Compact III upgrading etc.

Hey guys please need some seriose help herei hav a artimis tmob mda comact 3 and i want to change the skin to the cube thing via touchflo or something please help me i have been trying for a few days now and i cant seem to get anywhere, i need to know what the basic things i need to do in order to make it work, i dont sem to understand the program properly, however from reading the forums i found out that (please correct me if wrong) i need to do the cid unlocking first before i do anything. right?.... so anyways i have bin trying to use the uspl thing in this forum and cant seem to get anywhere with it. everytime i try and instal iti end up at a white screen and the activesync conncetion disconects from my pc. and the white screen just stays there, so i am so lost in this, please help me. please point me in the right direction to hack this phone. please any information about what i need to do will help, also, i had this phone unlocked to all networks from the shops so i dont know how they done it. here are my specifications
tmobile mda compact 3
spl = 3.15.000
windows mobile 6 (which i upgraded to from 5)
rom version = 3.15.110.2 wwe
radio version = 03.06.90
protocal version = 3.15.110.102
please help me i dont know where to begin
thanks
Kieran Dhavsadh

Did the white screen stays on even when you performed a Soft-/Hardreset?
What about the connection to AS after resetting?
I think without connention to your PC you'll have a prob.

the white screen comes on during uspl installation and it is supposed to reboot for the ruu installation but it jus stays white and the connection disconects and doesnt connect to the pc. so the ruu doesnt run and i get error code 260 is my mda specs ok to run these program. i.e. the spl version etc..
thanks

Related

please help meeeeee / i want back to orginal rom

i upgrade my mobile (Qtek 1010) to new rom but now i have many of problimes and i want back to my origenal rom----how???
please in steps
every time when i am trying to make upgrade for rom give me message
error 011: execute remot communication programe error
cannot rxrcute the remot communication programe please make sure the usb-serial cable is properly connected
put every thing connected and work well why give me this message just when i want make upgrade
please help me
Ever tried searching in the forum?
Some ROMs (especially the T-Mobile) prohibit flashing via exe file. You have to flash your device via sd-card...
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
but my mobile work and
i am trying to click in the screen but didnt do any thing click 9 give me 0 there is something happend
Go to settings/system/screen. Run the screen alignment procedure.
i cant go to setting or any where
If this problem still exists after a hard reset, then i would say, is the digitizer malfunctioning.
I think you have to rpelace the device.....
Stefan
http://forum.xda-developers.com/viewtopic.php?t=10550&highlight=alignment
Try that and see if you can align from there.

Need Help Puttin In Touch It

Can Someone Tell Me How Or Give Me A Program To Sign On As Guest So I Can Install A Touch It Rom
you can search the forums for how to flash roms... there are so many different ways to do it.
If you have ActiveSync in XP or Mobile Device Center in VISTA.. and you are able to successfully sync your phone with your machine ... all the instructions you need are included with the Rom download. Try reading the directions.
I will help you, what kind of herald do you have, CID lock yes or no? Which provider?
secondxg said:
Can Someone Tell Me How Or Give Me A Program To Sign On As Guest So I Can Install A Touch It Rom
Click to expand...
Click to collapse
When you hard reset your PDA, and then connect it to your PC with activesync it will ask you to setup a new activesync session. Cancel that process and it'll be connected to activesync in guest mode. If you go to the help options in your PC for activesync and search on Guest it'll go into slightly more detail.
thanks a lot
oh yea... i got the original tmobile wing with the original rom. 4.10.531.3 wwe im tryin to install one of those tmobile original rom with touch flo. ima newbie so just tryin the simple til i get better at all this. dont wanna brick my phone
is this a reversible procedure? installing touch it?

Where to start?

I have an HTC Innovation, Qtek 9100...also wizard i think, Os: 1.1.7.8
GSM 1.4.10, SPL 1.01, Ipl 1.01, The language is in french.
I want at least to change the language to english, but i want it also a little updated.
I don't know what g3, g4 means and how to find out what version i have.
Please tell me where to begin to upgrade the phone, here are to many post and are some terms i don't understand like g3, g4, ipl, spl.
I don't think the phone is locked.
I also have vista
Thankyou and please guide me a little.
Start Here
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
You have a G3 device
Here is a link to flash an english rom to your device
ftp://xda:[email protected]_9100_RUU_Prodigy_10107105_Qtek_WWE_ship.exe
it is not an upgrade basically the same as you have now but in english
here is a link to all the files you need to unlock the wizard both sim unlock(any sim card can be used) and cid unlock( You can install any rom)
http://rapidshare.com/files/53377946/Wizard__CID___Sim_Unlocker.rar
password for rar file is scousemartin
Once you have all this installed, you can flash any wm5/6 rom available for the wizard
thankyou, u've cleared things up for me ...
just how u know that is ia g3 or g4, g i think g stands for generation right??.....
found the info from the links...thanks again..
lanst question, after u what is the best wm5/6 to install onto the wizard? what rom posted here? i see here some tnt rom, are they good?
I use tnt 1933 from here and have no problems with it ,i would use radio 2.19 as well,as people have issues with missed calls etc, a link for that is there too
I know you have a g3 as your ipl and spl are 1.01 if it was a g4 it would be 1.01.xx
http://forum.xda-developers.com/showthread.php?t=341550
download links are located in post 3
you know what is not working? the link to the original wwe rom, from the ftp, looks like it is not there anymore!? can u verify that? or is my computer the problem?
yes i have just checked it isnt available anymore, in fact none of them are there anymore. download my wizard unlock pack and unlock the wizard with lokiwiz2b how to is here http://forum.xda-developers.com/showthread.php?t=249474
hope this is my last question!
What i have missed or what am i doing wrong?
so, i installed the rom from your unlock archive and it is ok, my wizard is in english now
i tried my simcard and it works so that results that my phone is not sim locked so i didn't use any of the sim unlock tools.
now i try to flash the tnt rom and gives me : error 295 and says something like imposible to use on your device and says to use some newer nfb file
...and what is the extended rom?
now i am reading: You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
so this means i can't install this rom if i have ipl spl 1.01?
reading a tutorial while updating this post!, so i red that i have to install a tmobile rom before i can install any rom? is this true?
Which rom did you install the button rom? or the o2 rom?
if it was the button rom did you follow these instructions
1 - Unzip lokiwiz.zip to a folder on your desktop
2 - Copy EnableRapi.cab to your Wizard
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via activesync with the computer
press the windows key + r and type cmd and press enter to get a dos window,that way when lokiwiz finishes you will still be able to read what it says
5 - Click on the black dos window that has opened and type cd desktop then type dir /ad and then a list of all the directorys on your desktop will be shown then change directory to the lokiwiz2b directory and Execute lokiwiz.bat (on your computer!)
Extended rom is what it says, a part of rom that is in an extended partition, basically it contains customisation programs and important files for installing into the wizard when it is hard reset.
when you say you tried your simcard ,was it the same provider e.g. o2 that you were using before? If it is the same that wont make a difference, try a sim from a provider that you dont have like t-mobile.
Anyway simunlock just allows you to use any sim, cid unlock allows you to load any ROM which is what you want to do.

Upgrade ROM without ActiveSync!

hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?
see this post 6
this method work!
http://forum.xda-developers.com/showthread.php?t=340618
I've done all said in the forum you have indicate but nothing....
I fear that my device is not out!
WaveMaster1406 said:
hi bro
My Herald have a big problem. it's freeze on the HTC spash screen and can't load the ROM. I've made a hard rest, it's done but the problem ist still present.
I've download the Windows Mobile 6 RUU on the HTC official site but it's impossible to do the rest because ActiveSync is not connected with my phone. How can i resolve my problem without ActiveSync?
Click to expand...
Click to collapse
Have you placed the phone into bootloader mode before using the RUU? (Holding the camera down and pressiing the soft reset button?)
Activesyn won't recognize the phone if connected during bootloader ... but if the phone says "USB" on the bottom left, you can run the RUU and it will work.
My device display "USB" in bootloader mode when i connect it to my PC.
But the problem is that the pc can't detect a new device connected...
When i try to flash by the SD card my herald can't detect the card!
I'm affraid! Please HELP ME!!!
why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao
why you d´ont write more?
isp XXXXXXXXXX
spl XXXXXXXXXX
card formatted at FAT 32?
camera + comm + reset ?
and was see you
"card not recognized?"
i am not a profi, but if one one this read, can you help
i find this in herald forum from here, try it again, and again....
and answer.
Ciao
IPL 1.08.0001
SPL 1.08.0001
It's normal that i get same informations about IPL and SPL?
I've done the procedure to enter in bootloader mode
But my computer don't detect it and my device display "USB" in the white area
of bootloader screen (this is normal)
But i don't know why it can't read my card with HERAIMG.NBH file inside!!!
The version of my bootloader is not displayed. Is it normal?
Per aps my bootloader get to be flashed, but how can i do it if it's the source of my problem?
PLEASE YOU ARE MY LAST SOLUTION!
about ipl 1.08xxxx and spl 1.08 xxxxx (very bad problem)
http://forum.xda-developers.com/showthread.php?t=343760&page=2
1 you have original Ruu.,.,......ship.exe
try it again when you are in bootloader mode, and reply. goes or not?
2 you have your original ruu..........ship.exe
whit winrar extrat all, and you have to rename the ruusigned file (60MB or more MB not the file with 1 MB!, to HERAIMG.nbh.
if dont work i some not can help you i m sorry.
my device work after many problem again but i have no WLAN and i have not isp 1.08xxxxxxxxxx
i wish you can write very good new!
show in your computer
if you are in bootloader mode wiht herald
if you have a networkcard not active! reactive this now
i had wm5 and his sync automatic
but after data crash on herald with wm6 does not sync again,
i search in my computer and a have see that 1 windows mobile device card does not was connect and i have reconnect this. and momentanly works again good with wm5, wm6, touch flo
show, you have no other way
ciao

MDA Vario II (Hermes) upgrade problem,

Hi @ all
I need help!!! I have a Vario II and wanted to unlock it to use another sim, i downloaded a package called HTC_Hermes_SIM_CID_Unlock_v3a and started it. Ok now i have the big problem that when i start the MDA, only the Tri color screen appears. What can i do, do make it work again??? Maybe an upgrade, i have no idea.. Please help me, i wanna use my Vario II again, now it seems, that i can throw it in the rubbish bin. I'm absolutely hopelessly....
Ps. I also tried to update it to WM6 with the t-mobile software and with a normal one, downloaded from a link in this forum but after 1 % there is a update error 286 : The ROM Update Utility has encountered communication errors during the update process... This programm will guide you.. and so on ..
On the screen are the 3 colors and white and the Information: HERM 300 IPL-1.01 and HERM 300 SPL-1.40.0ipro
Ok thats all i know ^^
Firstly, have you tried the unbricking wiki page and followed the instructions. Be patient, read, reread and understand.
Secondly, what OS are you using (Vista, XP, W2K etc?) do you have the .net framework installed on that PC?
You (fortunately) appear to have HardSPL on the device by the sound of it so should be able to unbrick it if you follow the instructions on the wiki page.
Make sure you're using a non-vista PC with the .net framework installed and then try flashing ANY OS ONLY Rom in NBH format using the custom RUU wrapper. This should restore your device to some form of order.

Categories

Resources