I was using vjspeeddialer for mapping the one of the softkeys for opening the speeddial.But, since the build 20270 and later the it does not work. The speed dial button is no more there on the new gen diamond dialers as well.
I wonder how to use speed dial now? can any body make a suggestion?
Related
Hello all,
I did some searching and haven't really been able to find an answer so far. I am using the eten skin with smartdialer with the black glass blue skin. The problem is that all of the buttons have a gray shadow behind them. What's even more funny is the "History" button has a shadow behind it that says "Call History" and they don't seem to match up at all. Overall, none of the buttons are aligned correctly. Does anyone else have this problem and have you found a workaround?
I have attached a screen shot of what I'm talking about
First and foremost the Eten dialer program doesn't seem to work properly with smartdialing. It takes up too much space in the upper portion and causes the replacement of some of graphics like you are seeing.
Second you are using a skin pack on top using the Eten dialer. The Eten dialer replaces almost all of the phone program graphics, then you have replaced them again. The Eten dialer does not put the graphics in the same place as the original dialer program, so things aren't aligned properly with the text.
There's a (hacked?) version of Eten that supports smart dialing.
Unfortunately I'm also suffering from the same problem. WarlockLord, were you using any of paulyA's skins before this? The text looks like "legacy text" from his classic skins. I was using the original Eten dialer with the famous orange skin before this.
I'll post again if I find a solution to this...
I use the E-Ten dialer with smartdialing for over a week now on my Wizard.
(Pauly A) Said that it has some bugs and that it is a beta version, I didn't find or noticed ANY bugs!
It works just perfect on my device (with the standard blue skin).
Screw the original dialer.....E-Ten dialer for life
The problem with th e*Beta* version of the Eten dialler is that, even though the original (non-SD) version used 'drawn' buttons, the new version uses a comination of the two, the number pad is 'drawn' while the in-call pad seems to require system fonts, the PaulyA versions of skins have drawn buttons in both version... there are versions of the Eten Dialler with SD support that use drawn or system buttons here, and also a landscape skin, however I find either one has the same issues on the in-call pad!! Others seem to have had success though...
Has anyone had a problem with the Eten dialer and SPB Pocket Plus?
Every time I have them both installed, once I reboot, my device gets hung on the Windows boot screen. Any ideas?
yes I have the same problem with spb pocket plus!
First I installed pocket plus 3.0 and afterwards the E-Ten Dialer, then I tried it the other way round: first Eten Dialer, then SPB Pocket Plus...same result:
It hangs up in the windows mobile startup-screen.
Okay, I've been reluctant to post this, but I've search the forums and I've search Google, etc, etc. and can't find the answer... What I want to do is add two icons on my Today screen that go to my Call History and my Speed Dial. I'm using iLaunch and can pretty much create an icon to anything, but for the life of me I can't figure out the link/path to Call History or Speed Dial. I'm pretty sure it possible bacuse it's right there as a button on my dialpad. Can anyone tell me the link or how to create a link to those two applets?
Thanks!
Oh, I have a 8525 running Black 2.0
egypt123 said:
Okay, I've been reluctant to post this, but I've search the forums and I've search Google, etc, etc. and can't find the answer... What I want to do is add two icons on my Today screen that go to my Call History and my Speed Dial. I'm using iLaunch and can pretty much create an icon to anything, but for the life of me I can't figure out the link/path to Call History or Speed Dial. I'm pretty sure it possible bacuse it's right there as a button on my dialpad. Can anyone tell me the link or how to create a link to those two applets?
Thanks!
Oh, I have a 8525 running Black 2.0
Click to expand...
Click to collapse
Download the attached file, unZIP it, copy CallHistory.exe to your phone, and you will have CallHistory. I dont know the solution for Speed Dial. sorry.
Thanks! Worked like a charm. Now if I could only find the Speed Dial app....
egypt123 said:
Thanks! Worked like a charm. Now if I could only find the Speed Dial app....
Click to expand...
Click to collapse
can you guys please post a Screen Image?
I just want to see if it's what I'm looking for
I currently don't have a screen-print app on my device to get you the actual image of my Today screen, but this image is similar to the look of mine with the larger icons pointing to various applications/shortcuts. The Call History and Speed Dial screens are the same as you get to by going to the Dailpad and clicking on the History and Speed Dial buttons.
I find myself using the Call History and Speed Dial more than my Contacts or manual dialing so I wanted access to those two options with one click rather than going through the dial pad or fumbling around with the bottom jog pad.
Try
http://www.vijay555.com/?Releases:VJPhoneShortcuts; try it
or I made myself a small cab that I can send u with one the apps above (speedialer) to install to left soft key straight.
dan1967 said:
Try
http://www.vijay555.com/?Releases:VJPhoneShortcuts; try it
or I made myself a small cab that I can send u with one the apps above (speedialer) to install to left soft key straight.
Click to expand...
Click to collapse
hello dan1967 could i have a copy of this cab please ??
Thankx
John..
Why should you have a piece of software running for his.
Press the "green" button and directional pad "right" and you will have the calle history
Press the "green" button and directional pad "left" and you will have the speed dial list
speed dial
thanks for that Davuzal and it very useful ,but i can not get to both buttons when its in car holder what i needed to do was a press of the top side button or voice comand iv done both with help from here
http://www.vijay555.com/
thankx to all
John..
towinguk said:
hello dan1967 could i have a copy of this cab please ??
Thankx
John..
Click to expand...
Click to collapse
here it is; let me know if it works for you.
hello
yas that works fine thanks
John
The PaulyA skins like black glass and the others based on the Eten dialers have a couple of issues. Firstly the talk button does not redial, it just does nothing. Second in the dialer screen the left soft key instead of being linked to contacts is linked to hide the dialer.
Can anyone help? Its happening on a PPC6800 Mogul/Titan with WM6. I'm sure it's an issue with WM6 so anyone with a WM6 device can test this.
I have the same issue and was wondering if anyone had a fix for this as well.
ericc191 said:
I have the same issue and was wondering if anyone had a fix for this as well.
Click to expand...
Click to collapse
Are you using the dialer without smartdial or the beta with smartdial? The beta works fine for redialing the last #...also there is an app called redial 1.02 that can be set to auto redial a busy # X times with x seconds between attempts....should be on pocketpcfreeware.com
Dialer problems
I have the same issue: the left soft key is 'Hide Keypad". It is "contacts" on the standard dialer.
When I installed it on my 8525 it worked correctly and now on my Mogul it has this 'bug'.
I sent PaulA an email today about the issue. We will see what happens.
I installed and later removed the Smart Dialer and that may have left behind some files during the Remove Programs routine. I have not done a hard reset because I have a lot of configs as well as a couple of apps I do not wnat to reinstall.
Is there a large dialpad similar to idialer but with smart dial (so spelling out a contacts name will bring up their number) ? or even a way to enable smart dial?
iDialer here:
http://forum.xda-developers.com/showthread.php?p=2694308
or something similar to the minimal dialer here:
http://handheld.softpedia.com/get/Skins/Minimal-Dialer-64089.shtml
but doesnt use the diamond phone canvas as a base (because of the issues with wm6.5 & the just stupid amount of ram the diamond phone canvas uses)
currently i'm using the gorgeous Ryon dialer skin here:
http://forum.xda-developers.com/showthread.php?t=508920
but the buttons are to small
Anyone know what dialer this is and where to get it?
http://forum.xda-developers.com/showpost.php?p=1336681&postcount=41
Seems to be what i'm looking for
looks like an old version of inesoft try here
http://www.inesoft.com/eng/index.php?in=phone.html
You can try Yota Dialer (search here), except it's a little buggy for me.
thanks for replies guys but Innosoft doesn't seem to have smart dial otherwise was good and ya yota is just a bit too buggy (not to mention it takes up as much space as the regular htc dialer)
anyone else have suggestions on a large button dialer with smart dial?
averma said:
anyone else have suggestions on a large button dialer with smart dial?
Click to expand...
Click to collapse
There isn't one really.
I've been looking for the same solution for a while.
Put a request for a developer here instead. I'll put my hand in for the graphics.
iconsoft phonex has smart dialing and a large keypad, I think the latest version uses a lot less ram too a simple dialpad similar to that would be great to replace the small wm dialer
Maybe o3touch brings what you want? See http://www.o3touch.com/
phonex is not bad but when receiving it interferes with the windows 6.5 lock screen, otherwise it was actually pretty good, had smart dial n everything
o3touch seems to be a keyboard not a dialer so cant really comment on that
i came across a really good 1 but its incomplete, its here:
http://forum.xda-developers.com/showthread.php?t=437296
its a VGA touchflo 2d dialer, the dial screen is perfect with smart dial and good buttons, as well the incall screen works great.
forgot to test out how it works with an incoming call and the wm6.5 lock screen (though it probably wont work that well)
but the big killer for this is that its not finished and in wm 6.5 when using smart dial the contacts all wash into eachother and become unreadable (the names will just constantly overlap eachother so its unreadable)
anyone know of a dialer similar to this but JUST the dialer, the incall screen is nice but not a big deal but any kind of custom incoming call screen will just screw with the wm6.5 lock screen
i've seen a boat loads of dialers for qvga (minimal dialer being really good) so their has to be something similar for VGA, or if their are any developers who could make 1 for 6.5
its the same dialer as 6.1 but because the lock screen already has slide to answer built in and an incall screen built in we only need to skin the actually dialer itself
and of course if anyone has a dialer they really like please share
Hi Guys
I am using Iconsoft Phonex as my dialer. Its a super dialer. My problem is it doesnot integrate with the People tab provided on Touch flo. Clicking on the call button in the people tab doesnot initiate a call. It appears to become a dummy if i have Phonex running. I think it is because TF3D doesnt know it needs to use Phonex dialer to initiate the call. I am sure there is some registry key i need to modify to get this working.
Anybody aware of this? Any known fixes available? This would make my phone perfect!
I am on Dutty 3.3 XT ROM.
cheers
Raz
I'm usingthe stock ROM, PhonEx 1.4 and what you're describing works OK for me. Trying my home landline from TF3D/ People dials home and goes straight into the PhonEx dialling screen. I know that this is no consolation to you at the moment but I would try a complete uninstall and reinstall. HTH.
micken thanks for the reply. I just did an uninstall, reset, reinstall reset... still the same problem... maybe its the rom version i use? i never tried it with the stock rom i had.
its such an annoyance!
One thing.. when you disable phonex, do you get the standard wm dialer working in all its glory? For me the dialer comes back but i cant see the call list in the dialer.. its all blank, though i can dial and make calls and even scroll down the blank list!
i have same problem