Related
Hi all,
I am aware about all the other threads but yet could not get across some nonsense on my MDA Pro.
I went back to the t-Mobile ROM because of german support on many features but running ozVGA now successfully with two exceptions:
1. Each time I reset the device, I have to reinstall vjbigphone (0.91) and re-run the .exe to get my dialer back to full screen. VJ did a real got job, but I hope anyone coud tell me, what could be wrong?
2. Does anyone know, how to get rid of the stupid and ugly video-button in the t-mobile dialer? I replaced all BMPs with the one's from iMate, but yet video is the stupid grey. flat button.
Once this is solved, I will write down exactly how to get really the tiny machine running with the best tools for best results.
Greetings
ndee
ndee: why do you have to re-install the app?
After a soft reset, what happens when you choose the "load and fix" option from the tray?
I am hoping to spend some time on this app over the next few days. Many apps being fixed, one a at time...
V
Hi Vijay,
when I softreset, everything on the phone is back to the tiny layout. Even though I "load and fix".
Only workaraound I figured out is reinstall :-(
ndee
Strange - I know we spoke about this before, but then, after you re-install it works?
Have you tried not loading VJBigPhone, soft reset, load the phone (eg press green key, so you can see Tiny buttons) and then load VJBigPhone. Does that make any difference? Re-installing shouldn't make any difference, it doesn't load any settings etc from the registry etc...
v
I have some similiar problems. I'm using also the neweset german ROM on my MDA Pro and after a soft reset I don't have to reinstall the app, but I have to close it and restart it again to gain access to the phone application. Without close VJBigPhone nothing happens, after starting the application again everything works fine (till the next soft reset, which happens every morning after the daily backup)
Wolfgang
I have an idea what might be the problem then.
The code was modified a while back to try to find the "phone" program without you having to specify the name in your own language (eg "telefon" instead of "phone"). However, it's possible that if the phone isn't found, it's getting confused. I'll try to look at the code again soon.
I'm not writing any new programs for a while while I do updates to all the old stuff
V
out of sudden, I dont need to reinstall anymore. Just after reset, I run vjbigphoneres and phone comes up full screen. Dont know what I did and how long it will last - keep you informed though - thx so far.
Any solution for the ugly video button of TM insight?
ndee
TM Button: I know you've spoken about it for a while, but I've got no experience of it, I don't really use my Universal I think someone (you?) posted one before, but could you send me a screenshot if you've got appropriate software, and if you have them, a zip of your extended rom?
V
Well I did 2 hard resets to see if Manilla2D was the problem and i'm using just that and the stock sprint 6.1 ROM and all of a sudden im having a couple annoying problems and wondering if there is any fixes to them.
- When I click on a Text Message from the main screen and it brings up the threaded texting, when im using XT9 and I start typing it will type as if im holding down the letters like if I press the "as" button "?" will come up, and for me to type normal i have to go to Start>Programs>Messaging, which is really annoying lol.
- Another one is im using the TouchFlo2D Dialer, if i switch to keypad from call status the whole phone freezes up and i have to soft reset
- everytime i restart my touch i get a startkey.exe error and i just hit dont send and start up touchflo.
- last problem/bug that i can remember is that my phone is really really slow and i have nothing on it except manilla2d.
these are the steps i did to install manilla 2D idk if it will help solve my problem:
copied the "EMPTY" biotouch.exe and 3 other files I got from XDA and put them in the "Windows" folder, then used resco registry editor and disabled the cube, then installed all the cabs for Manilla2D to my "Device" not storage card, (it asked me to soft reset after some of them, but i didnt since i was going to soft reset after i finished installing them all.) then soft reseted and manilla2d works just is really laggy =(
any help would be greatly appreciated! thank you in advance =D
I had the same problem with my phone running extremely slow whenever i tried installing manila 2d on my phone through the cab installs. I flashed to a custom rom with manila 2d built in it and the problems went away. It runs extremely smooth now.
ive never flashed my phone and only way i would do it if i had someone walk me through it as im doing it=\
How did you get the 6.1 ROM? You would flash it the same way as you did that one.
i just installed it from the htc site or whatever, but for custom roms dont you have to do all that unlocking and what not?
reeno said:
i just installed it from the htc site or whatever, but for custom roms dont you have to do all that unlocking and what not?
Click to expand...
Click to collapse
It's not terribly hard - in fact, the unlocking process is very similar to how you flashed the official ROM update.
Just use COKE's unlocker (just an app like the flasher) and install any custom ROM you want
this slowness has happened to me with a custom rom, i think its manilla.
it was very wierd, overall the entire OS was mega slow and un-usable as the OP said
I found what works best for me is piecing everything. I took everything from Update 19 except M2D-Beta-x.xx(Update19).cab. I installed M2D-Beta-x.xx(Update 15).cab (anything after made my device slow). I installed the latest version of Opera.
(sorry for the dots I'm just looking at them on my phonenand it's not showing all of the titles on some.)
First I ran:
HTC.home.v2.1.1005.722.directory.and.......... .cab
So From 19:
Enchasement..outlook.and.picture...... .cab
Audio Manager_2.0_1819.2129.cab
FSP, DShow, WMP, Youtube, Video Fixes.cab
Album_2.0_1818.3829.4.cab
Task_Manager_2.1 34837.5.cab
GoogleMaps_compressed.cab
HTC_Opera9.5.2392_www.cab(This is not from 19 Found it in another thread)
YouTubeQVGA1_5_1819_1531.and.mhubVO.cab
From Update 15:
M2D-Beta-0.08(Update 15).cab
Good Extras:
digital clock
Ringtone_plugin_1.00.080416.2.cab
Volume_control.cab
UI Tweaker
If you need this packaged let me know.
Great manilla2d rom
Hey guys.
If your looking for a good, fast, stable rom with manilla29 PLEASE flash this rom..............
http://forum.xda-developers.com/showthread.php?t=432487
NFSFAN has spent lots of time on this and is by far THE BEST manilla2d rom there is out there. He is constantly update bugs and getting the fixes out as soon as possible. This is the closest thing you can get to the diamond/touch pro without buying one. Any questions please feel free to ask BUT READ ALL DIRECTIONS ON FLASHING IF YOU HAVE NOT YET!!!!!!!!!!!!!
thermus said:
Hey guys.
If your looking for a good, fast, stable rom with manilla29 PLEASE flash this rom..............
http://forum.xda-developers.com/showthread.php?t=432487
NFSFAN has spent lots of time on this and is by far THE BEST manilla2d rom there is out there. He is constantly update bugs and getting the fixes out as soon as possible. This is the closest thing you can get to the diamond/touch pro without buying one. Any questions please feel free to ask BUT READ ALL DIRECTIONS ON FLASHING IF YOU HAVE NOT YET!!!!!!!!!!!!!
Click to expand...
Click to collapse
I have to second that.
I used to have the stock Bell 3.09.666.10 ROM, with (my last incarnation) update 21. To get all the parts of M2D running (yuotube etc) you have to install alot of patches and tweaks.
My theory has always been, if you have to add too many parts to get something to work, maybe you should start over. Google "Beech 1900D" to see how this applies to aircraft!! A custom ROM with everyhting cooked in oem style runs much better than a Frankenstien special.
It is fun trying to get everything to work though.
When I first added M2D to my device it was extremely slow. After playing around for a while I found that the page pool played a huge roll in the speed of the rom. My page pool is set at 24 and I have no problems at all. I have had no problems with NFSFAN's roms. I believe the PP is already set to 24. Hope this helps.
Guys, I've installed Opera mobile 10 beta 3 on my HD2 from Mike 2037 thread (wont let me post the url yet )
But no matter what I try, I can not get it to autorotate. Anyone managed to do this? If you have, I would be most grateful if you could explain how to do this
Many thanks for any help given
1. install BSB 1.6
2. go to Menu -> Rotation
3. go to Options -> Add application
4. On dialog click OK
5. Go to home or wherever your Opera shortcut is and start it.
6. Shake your HD2 until it says that the app was added.
7. Enjoy.
It worked nicely for me... And still works.
Cheers.
I've just installed Opera Mobile Beta 3 and rotation is working fine for me. It should't need aditional software to make it rotate to landscape.
Hi Guys, thanks for your replies
@ikovac - I've done as you said and got the messagebox telling me the Apped had been added to the rotation but it still wont enter landscape mode when I rotate the phone. All other apps etc do just not Opera 10 beta 3.
It is really annoying me now as I really like the new opera browser
Hi Guys, just letting you know that it is now sorted. What I didn;t realise was that I would have to go back into BSB Tweaks and select Opera 10
Thanks for you help guys - I think version 10 of Opera is the dogs dangly bits
i think ill install opera 10 and try the bsb tweak. not having a landscape mode was the only thing putting me off. ill just ask a quick question here though instead of starting a new thread.....when i install opera 10, do i need to save it to the device itself or can i install it to my memory card. cheers....
Hey donwhann, I did both and I don't think it made a diffence. I settled in the end for installing it on the phone because I use the web a lot but may not always have the same SD card in the phone
Guess it's up to you dude
greenyboy said:
Hey donwhann, I did both and I don't think it made a diffence. I settled in the end for installing it on the phone because I use the web a lot but may not always have the same SD card in the phone
Guess it's up to you dude
Click to expand...
Click to collapse
cheers buddy, i'll do the same and install it to the phone, i never thought about the "changing memory card" bit which ill be doing pretty soon lol. cheers.....
i cant get bsb tweaks to landscape it......gutted
@donwhann
It took me a couple of goes buddy. INstall BsB Teaks 1.6 (I think you need to reset) then follow the instructions ikovac wrote. When you shake you phone, you should get a prompt asking saying the the application has been added. You then need to go back into BsBTweaks and then select the application in the Rotate menu
Hope this works for you fella as it sorted me out
greenyboy said:
@donwhann
It took me a couple of goes buddy. INstall BsB Teaks 1.6 (I think you need to reset) then follow the instructions ikovac wrote. When you shake you phone, you should get a prompt asking saying the the application has been added. You then need to go back into BsBTweaks and then select the application in the Rotate menu
Hope this works for you fella as it sorted me out
Click to expand...
Click to collapse
it took a while but i got it sorted lol,it looks sweet......just need pinch to zoom now
thanks for the help bud.......
@donwhann, yeah pinch and zoom would be brill but everything makes up for it at the moment. No problem with the help - I struggled myself so happy to pass on my experience to help
Do you think Opera 10 is cool? My mate has got an iPhone and he's says (and I agree) that the HD2 browser is better
I'm glad it worked.
BTW I didn't have to select it in the bsb rotate menu. It worked straight after it had been added by shaking. I believe bsb selections are for removing apps only.
edit: @greenboy opera 10 beta 3 on hd2 is way better than iphone browser to me
Does the flash work properly with beta 3 on the HD2? Also, if you install it on the HD2, will it copy over the opera 9.7 that's built into the HD2..?
Raspster said:
Does the flash work properly with beta 3 on the HD2? Also, if you install it on the HD2, will it copy over the opera 9.7 that's built into the HD2..?
Click to expand...
Click to collapse
Na it dont, you end up with both versions, although you can set it as the default browser.
its bsb tweaks thats the problem. it still has a bug in that it doesn't save properly if you soft reset when its prompts you. the solution to it is that when it asks you to soft reset say no and then when the application is closed perform a soft reset. either off and back on or the reset button or xda shutdown etc. should be fine that way.
@all
this enhanced version has landscape by default
http://forum.xda-developers.com/showpost.php?p=5618575&postcount=1458
Enhanced version works great.
sorry,ignore this.
Will that work OK on standard/default windows 6.5 without any tweaks etc?
Ok so i just bought my new HD2 Just arrived last week, And Yah its freezing like most are, I have heard numerous fixes to this I guess flashing Roms or installing apps. I dont know if this thread is in the right category, but can someone help me fix the phone so it doesnt freeze everyday when i use texts and run smoother overall? I dont know how to flash roms or tweak any of these replies can someone help me please? I tried Custom window home tabs app but it got rid of the home screen so i took it out.. please someone help me .... i have yahoo, aim and msn messenger email or just reply on here ? thanks guys
try HR-hard reset.
1.turn your phone off
2.press and hold volume up&down buttons same time and turn your phone on
it will reset and restore it to the factory settings
This should help
I was in the same position 4 months ago... it's a steep learning curve!
In no particular order:
1. Get your phone and PC hooked up with activesync.
2. Learn how '.cab' files work - you basically just transfer them to your phone (I use activesync) and run them to install various things.
3. Get Resco Registry - this is a registry explorer which I find very intuitive and useful for changing registry values.
4. Have a look around this site, notably the tweaks threads, and see what you like.
5. When you are comfortable with the handset, look into upgrading your ROM. I started on Vodafone 1.43 ROM, but have since upgraded to Vodafone 1.66 ROM. It is very easy to upgrade to official ROMs (at least it was for Vodafone) - I image the manufacturers will give you a step-by-step guide.
6. Get Cookie's Home Tab!
Can you tell what ROM/Radio/Manila version you are currently on?
(Go to settings/about phone/software information)
aeagleboi22 said:
Ok so i just bought my new HD2 Just arrived last week, And Yah its freezing like most are, I have heard numerous fixes to this I guess flashing Roms or installing apps. I dont know if this thread is in the right category, but can someone help me fix the phone so it doesnt freeze everyday when i use texts and run smoother overall? I dont know how to flash roms or tweak any of these replies can someone help me please? I tried Custom window home tabs app but it got rid of the home screen so i took it out.. please someone help me .... i have yahoo, aim and msn messenger email or just reply on here ? thanks guys
Click to expand...
Click to collapse
I don't know where you got the idea that most phones are freezing, because if that was the issue this phone would not be nearly as popular as it is.
* If you got the phone from your provider go to them.
* Try a hard reset, make no changes (tweaks, software installs) and see if the problem is gone. If so then something you did is causing the problem.
* Find a stable ROM in the development forum and learn to flash, it's very easy.
I applied all of the stuff mentioned by royalbloodvi in another thread here:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
So anybody, that finds those tips useful enough for him, should go with those. My problem was, that even when I applied all of the stuff, phone was still laggy, had some SOD's, sometimes turned off by itself etc. Since there is still no official note from SE about MR2, I was desperately looking for an answer. Creation of X2 subforum made my search easier, after browsing some topics, I gathered all the info, and to make it easier for you, I exposed it in this topic.
All the credits go to the topic starters in here, once again, I just gathered and compiled the info:
Xperia X2: How to change language (re-flash an Stock Spanish ROM), dreamcrawler for translation and originating tips, gbajzelj for the final idea and ultrashot and lollylost100 that provided the X2 software cabs.
***********************************
Procedure:
1) Open SEUS (SonyEricsson Update Service), start a new update. EVEN IF IT SAYS YOU HAVE LATEST VERS, UPDATE IT ANYWAY.
Another version: click on Start/Settings/System/Clear phone memory, enter all the needed info. It will put phone back into original state (MR1 - since you updated your phone to that version)
2) ONCE IT REBOOTS, CALIBRATION SCREEN APPEARS. RIGHT AFTER CLICKING ON THE CROSSES, IT WILL APPEAR THE SONY ERICSSON LOGO, AND IT WILL START APPLYING THE CABS. PUSH THE RESET RIGHT after it starts applying (hidden behind the stilus, opening the battery cover).
3) After rebooting, the Sony Logo will appear again asking to retry. Press NO. Well by default this will keep on showing up every time you restart the phone, and it will also reset your time & date setting to some time in March. But I found a solution for that. With registry editor of your choice, search for Launch190 (HKLM\init\Launch190\CustAppInstaller.exe). Delete that value, and phone won't ask you again if you want to retry the CABS instalation, also it won't change your Time & Date setting again!!
IMPORTANT: After that, phone returns to original WIN 6.5.2 state, without BUGGY SE stuff. At that point, phone is usable, stable and fast. You will have about 220 MB of free space on your phone.
Now you can go further by installing some of the SE stuff, but this is all up to you, since I don't exactly know, which one causes the problems (except for SlideView and TileWave panel, as was stated in some other posts). Grab the X2 Program cab's here: R1BA023_Original_Cabs
Put the extracted cabs on your SD card, insert it into the phone, and install stuff you want. I installed those packages:
SEMCFlashDeployment.cab
SonyEricssonDialer_1.1.0.996_vulcan_generic.cab -> New Vulcan Dialer
TaskManagerSetup.cab -> Task Manager, obviously
Camera_R109_RC1_38986.cab -> necessary for Camera
CommManagerCab.cab -> Communication Manager
FastGPSSetup.cab -> without this GPS won't work, at least did not work in my case
JMMS_Ver4.5.113_26Feb10_SE_PPC.cab -> reminded by rsx19, this one is needed for MMS
After installation of those, restart the phone. At that point around 200 MB of storage space is left, and around 120 - 130 MB of ram left. Although, it is not necessary to install all of those cabs (except for Camera, which I think is needed, unless you don't want to use camera ), it is all up to you.
Also, since you requested, I'll put down some of the cabs that are needed for different settings. But keep in mind, I am not sure if anyone of those cabs make any troubles or instability. So If you find any trouble or instability after some cab was installed, let us know and together we might find some useful solution.
Ok, to install some of the aditional setting in Setting menu, first install MyCPLSetup.cab, as I discovered, this one is neccessary for following CABS for various settings:
MobileData.cab -> for mobile data settings (HSDPA, ..)
ClearStorage.cab -> installs Clean Phone Memory
PhoneSettings.cab -> updates the Phone in Settings/Personal
SetupSNM.cab -> installs new Sounds & Notifications under Settings/Personal..
For the Illumination to work, install those 2 cabs:
IlluminationSvc.cab
PatternsSetup.cab -> SE Illumination Patterns, don't forget to restart phone after you install those two, and go back to Sounds & Notifications to set the illumination for various events.
After you install those cabs (not necessary to install them all, it's up to you) restart the phone and options will show up in Settings or desired category.
Don't forget, when you finish with installation of cabs, do a restart / soft reset of the phone, since some changes may not show until a restart / soft reset is done!
Using the phone with Windows Default theme, it runs smooth. Also battery life so far seems to be improved, but will have to run it few more days to tell the difference.
So far, my phone is lightspeed fast and, which is more important - stable!! You can now also try to apply settings, royalbloodvi provided in this thread - maybe you get even better performance:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
Ok, some are still having problems with SD cards being unrecognized or disappearing, here is the patch: SD Card Fix
Accelerometer based rotation:
If you loose the rotation during the setup of CABS, and you still want to use it, this is how you turn it back on: with registry editor open (HKLM\Services\MultiService\mods\Rotation\AccelBasedRotationEnabled). If your rotation is gone, this key has the 0 value. Change it to 1 and you get your accel based rotation back. I have yet to find out, which cab disables it!
I'd like that you people give feedback in here, which CABs are safe and needed to install apart from those I (originally gbajzelj) posted.
PS
I personally don't like the idea of stripping the phone down to the bone to make it work. If you buy a new car, it works as it was send out of the factory..you don't need to unscrew half of the engine, disable the steering, take out the seets to make it work. Same is with computers, just everything. But until MR2 comes out and hopefully repairs all the damage that was done with MR1, this is the solution for me.
Also thanks to everyone helping to make this phone less bugy and somehow usable
lyteo said:
...
I also installed SPB Mobile Shell 3.5.3, which works flawlessly on this fresh install.
...
Click to expand...
Click to collapse
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
spasoft said:
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
Click to expand...
Click to collapse
Hm, I tried and my GPS was also unresponsive, so I installed FastGPS and it helped!
its gbajzelj not gbanzelj ) np.
When i installed spb 3.5.3 and reloded weather info then when i turned off the phone and turned it on again the weather data was not saved and the wireless or data conscction did connect but did not load no new data from weather server. Skyfire did load the pages (the connection i guess did work) but spb shell did not load the weather data anymore.
i would also like if anione can make the camera button to open the camera app withouth the slideview. maybe a simple cab file just to set the camera button.
Sorry for typo
Does it ask you every time you restart the phone if you want to continue with setup?
If it does, did you notice that it resets the date? Thats a problem I'm trying to solve now Every time my phone restarts, date is set to 17. March -> maybe thats why your weather data is not reloaded??
For me, when I press the Camera button it opens the CameraApp. I installed only Camera Cab as you sugested, no SlideView, and it works!
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
It think you have to install MobileData.cab & MyCPLSetup.cab
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
lyteo said:
Looking into your answer right now...remind me, in which menu that setting use to be, I forgot already...
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
Click to expand...
Click to collapse
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
royalbloodvi said:
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
Click to expand...
Click to collapse
About the Time & Date bug, I think every time the phone starts as after I made MR1 update...so we must somehow find what is telling the phone that the software is not installed (if we trick the phone that is was fully updated and will not ask for retry at startup, this date & time bug will probably go away) - solution found, check first post
About missing things in Settings, I think it is all connected with MyCPLSetup.cab solution found, check first post
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
rsx19 said:
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
Click to expand...
Click to collapse
You don't need to reinstall, just check the first post, I updated it with solution for that - you just have to change one registry setting!
For Sound & Notification settings install SetupSNM.cab! For the Optical I have yet to find out, I'm doing my best, but can't be that fast I guess I did about 10 reinstalls and about 100 restarts of the phone today
awesome, do you know which one is auto time update
rsx19 said:
awesome, do you know which one is auto time update
Click to expand...
Click to collapse
You mean the Timezone tab in Phone settings? When it automaticly changes time due to time zone change?
In this case it would be:
TimezoneSvcSetup.cab
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
rsx19 said:
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
Click to expand...
Click to collapse
Maybe you know where that Auto Time Update setting was? And if you restarted the phone, after installation?
For the Illumination, check first post
Thanks for the reminder on MMS, will add it now!
For the settingspart1 & 2, I have to check don't know yet
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
X2 phone Signal Pick up Weak
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
rsx19 said:
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
Click to expand...
Click to collapse
Did you went back to the Sounds & Notifications and selected vibration? Becouse at the moment, only cabs I have installed are:
MYCPLSetup, SetupSNM, IlluminatonSVC and PatternsSetup, and illumination & vibration works for me. Or do a soft reset again, it might help.
nguyennghiep said:
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
Click to expand...
Click to collapse
Hm, don't know what your are your signal conditions with other phones, mine has a good signal and it does not matter, what I install..
illuminations work and all the settings are set, but still no vibe.