Hi all, need help with my liberated shift. It was working fine for the past 2 wks that I have had it. 3G worked flawlessly on both wm/vista.
I had installed Mozilla firefox browser on the vista side 2 days ago and now I can't get a connection. The wm side shows the connection to be 3g but I am not recieving any push mails or weather updates at all.
When I tried to manually send/receive I get an syncro error with no internet connection, yet the display shows 3g?
On the vista side, it just shows the connection to be local only. I uninstalled the Firefox/restarted but this problem is not going away. By the way..I have the performance at the vista side set to "high performance" as well. Please help me out...
Thank you
Same problem here since 5 minutes, re-installed german ROM, Provider E-Plus BASE, Data flat.
No idea, what happen...
What is really strange is that I am showing full bars @ 3g on the wm side...hopefully someone can bring some light to this matter...but glad that it's not a hardware issue as I am really enjoying this device..despite the battery life.
I had the same problem. It went away after updating connection settings in WM. My shift seem to periodically need that (or perhaps the "switch off..." that follows). Sorry if that was an obvious suggestion, but it realy helped me from a similar problem.
Also, the new usb... driver included in the driver update is said to ignore powersettings on vista. Since upgrading, I have run on powersawer mode without any network problems (provided that I safley remove usb stuff like SD or Lan, before hibernating vista). Have anyone else seen that?
as usual..thanks to all for the help... the real culprit was myself, as i had forgotten to pay the bill for the data service...all is good now... hehe.. so the only item that remains to be solved for me with this great device is the battery...all else is good!
thanks
Related
Hi @ all,
I just installed Active Sync 4.5 and have not yet synchronized once my wizard. I have following rom:
aku-3 Roms V2 For Htc-wizard 3.3.0.0
what are the problems?
- rapimgr.exe hast ALWAYS about 99% CPU loading, notebook is not anymore usable
- a synchrnonization lasts several minutes and ends with failures: when i click on view status after it seems to be synchronized, i get following message: server busy
- i cant edit settings, e.g. which outlook folder have to be synchronized, the option is grayed out...
(
has someone else problems like me?!
i will deinstall that and go back to 4.2 or what it was before...
thanks for replies
what versions of office and outlook are you using? also did you make sure you cleared up everything with your firewall software (if any)?
if all else fails uninstall, reboot, then reinstall. that usually does the trick.
good luck
I use Office 2003.
I reinstalled it already twice
now I connected it to my work pc, there it works... pah - it takes much longer than with 4.2, but the rapimgr.exe has not 99% cpu load while synchronizing and after like at my private notebook... :/
dbsoundz said:
I use Office 2003.
I reinstalled it already twice
now I connected it to my work pc, there it works... pah - it takes much longer than with 4.2, but the rapimgr.exe has not 99% cpu load while synchronizing and after like at my private notebook... :/
Click to expand...
Click to collapse
i'd bet money it was your software firewall. are you using zone alarm? if you are give access to all the components of zone alarm and you should be fine.
good luck
sorry, forgot to answer to this question:
i use sunbelt kerio. for old version it was configured correctly. when i look to the firewall, i see the programs with new icons which all have access as it was before... so i think that's not the problem
Hi i seem to have a problem with my dopod 838(htc wizard) i bought it 2nd hand and i can't get it to work with my sim cards( i tried 3 different network sim cards ) and i can't get any signal. the blue tooth, wi-fi, IR, and GPRS doesn't work. I can not connect with active sync... windows can see a device is connected but it says "unidentified device". The PDA side of the unit works perfectly fine, only the connectivity part and the sim won't work. I am sure it wasn't stolen coz it still has reciepts of the unit but its out of warranty already. any ideas on how to fix this? your reply would mean a great help. thank you in advance
vin-saint said:
Hi i seem to have a problem with my dopod 838(htc wizard) i bought it 2nd hand and i can't get it to work with my sim cards( i tried 3 different network sim cards ) and i can't get any signal. the blue tooth, wi-fi, IR, and GPRS doesn't work. I can not connect with active sync... windows can see a device is connected but it says "unidentified device". The PDA side of the unit works perfectly fine, only the connectivity part and the sim won't work. I am sure it wasn't stolen coz it still has reciepts of the unit but its out of warranty already. any ideas on how to fix this? your reply would mean a great help. thank you in advance
Click to expand...
Click to collapse
You should have started your own thread for this. You need to post more information though or nobody will be able to help you. Reboot your phone and you'll soon see a page that list your IPL, SPL, OS, GSM, etc in the upper left hand corner while it's rebooting. Write that info down and post it. if you want help.
hey guys, just wanted to know if anyone else is having a problem connecting to the internet. moreso through GPRS
I reset my phone and I know I have all the settings correct but I CANNOT browse pages. I am connected and have 4 bars but I cannot use IE to surf (or firefox for that matter) I cannot use my gmail settings on Poutlook either.
Any ideas? I had it working a few nights ago but now nothing....
its the prepaid svc so maybe they found a way to fix the tzones=free internet thing... hope not
anyhoo, thanks guys
Same problem
I too have the same problem with T-Mobile. I can no longer surf the web on my 8125. Worked great last week ,but will no longer work this week. I have tried to reset and reinstall the setting, but to no avail. Maybe T-Mobile has finally closed that loophole or the system is under repair. My phone shows full signal and the "E" symbol for edge, but will not work.
First let me say that many of you that post here are much more technically savvy than I am, so please be gentle.
I upgraded my shift to with SP1 last night, and it seems as if my connection keeps connecting/disconnecting while I am using my sim card connection. The signal seems to constantly be shifting between edge, 3G, and HSDPA. The fact that the signal from the carrier is constantly shifting protocols is not really unusual, but the constant connecting and disconnecting seems to be new (since SP1).
Has anyone else experienced this? Is there a known issue? Is there a fix?
Thanks
Dean
Yes. We talked about it in two other threads. I did many things and some of them worked. Try to disable USB port on activesync (WM Side).....
Dani
danielherrero said:
Yes. We talked about it in two other threads. I did many things and some of them worked. Try to disable USB port on activesync (WM Side).....
Dani
Click to expand...
Click to collapse
Thank you for the info. I am not able to find where to disable. My WM side is still like it came out of the box BTW.
mm, ok. then you should think about enable full WM and perform that tweak (and many others)
http://forum.xda-developers.com/showthread.php?t=378234
Well, I made the WM modification, and I went into activesync and unchecked the box next to "synchronize all PCs using this connection".
Was this the right place? If so, it didn't fix my issue, but I am not sure if this is what you meant for me to do or not.
Thanks again.
Hi. Yes, that what I meant. Have you disabled same option in Vista side too?
danielherrero said:
Hi. Yes, that what I meant. Have you disabled same option in Vista side too?
Click to expand...
Click to collapse
Thank you again.
I looked at Activesync in the CP,and didn't see where to disable it. I did see a couple of assocations there, but I didn't make any changes.
Is this the correct place to look or do I need to look someplace else?
OK... I gave up. I un-installed SP1 and everything (that I use) is back to working normally. I hope I don't have issues when I want to re-install the SP.
I did leave the more opened up version of WM6 in place though.
Dean405 said:
OK... I gave up. I un-installed SP1 and everything (that I use) is back to working normally. I hope I don't have issues when I want to re-install the SP.
Click to expand...
Click to collapse
Yeah,
Me too.....
Pfeffa-rah said:
Yeah,
Me too.....
Click to expand...
Click to collapse
Grrrr. Don't really want to give up myself but I can't find any solution to this. I also disabled USB connections but still no luck.
After I removed SP1, my connection starting working ok, but I had several other issues, the worst of which that the computer would not connect again after being woke up, and it would lock up on shut down.
I reinstalled the entire operating system... I hated to, but I hadn't installed but a few programs, and I felt now was the best time.
The weird part for me was that my WM6 modification was still in tact. I didn't expect that.
Dean405 said:
the worst of which that the computer would not connect again after being woke up, and it would lock up on shut down.
Click to expand...
Click to collapse
That issue happens to me with and without sp1. Not always, 20% of times. Specially if the device was suspended or hibernated a long time:Sometimes when I resume the system It doesnt connect. Looking at the events viewer It seems there was a problem restoring the usb connection (It hanged) so I cant turn off Vista but Keeping pressed the power button. I hope Microsoft and/or HTC solves that problem soon
I had never had any problems with the 3G/HSDPA copnnectivity until I upgraded to SP1. Weird though, after I upgraded on Monday I restarted and tested (as I knew some of you had had issues) and all was fine. However when I booted up last night I had the connection reset every minute as some of you have reported.
Has anyone who has upgraded to SP1 NOT had these connectivity problems on the VISTA side? Perhaps this would help us work out what is different on these installs....
firedup said:
I had never had any problems with the 3G/HSDPA copnnectivity until I upgraded to SP1. Weird though, after I upgraded on Monday I restarted and tested (as I knew some of you had had issues) and all was fine. However when I booted up last night I had the connection reset every minute as some of you have reported.
Has anyone who has upgraded to SP1 NOT had these connectivity problems on the VISTA side? Perhaps this would help us work out what is different on these installs....
Click to expand...
Click to collapse
I haven't got any problem with the connection, all my connection works perfectly before and after i install sp1
I won't be installing SP1 again until I see clear evidence that this issue is resolved.
BTW, after SP1, If I left my Shift sitting on my desk it would never loose connection. But if I used it anywhere else, it would connect and disconnect and eventually quit working. I am talking about the radio connection. I never tried the wifi connection after I installed SP1.
Everything seems to be back to normal now since I did a complete re-install. I am gong to wait as long as it takes before I try SP1 again.
Dean405 said:
I won't be installing SP1 again until I see clear evidence that this issue is resolved.
BTW, after SP1, If I left my Shift sitting on my desk it would never loose connection. But if I used it anywhere else, it would connect and disconnect and eventually quit working. I am talking about the radio connection. I never tried the wifi connection after I installed SP1.
Everything seems to be back to normal now since I did a complete re-install. I am gong to wait as long as it takes before I try SP1 again.
Click to expand...
Click to collapse
That's interesting you say that. The first day after SP1 it was on my desk and I had no problems. The problems started when I was using it sitting up on my hotel bed moving it around. Then toady I'm in the office, its on my desk and no problems again. Mmmmm not sure how this could make a difference but it is odd. Very odd.
OK, I'm now typing this on the WM side while SP1 uninstalls on the Vista side. Daniel - thanks for your solution, it does seem to work but my OCD won't alow me to accept it until the bug is fixed properly or we can work out why it seemingly affects some users and not others. I will contact HTC tomorrow and see if they are aware.
Have the people who it has not affected liberated their shift?
Have they done something to disable USB connection as has Daniel?
Either way it really annoyed me - the S in SP1 is for sh*t as far as I'm concerned.
I contacted HTC 2 weeks ago asking for a solution but they havent contacted me by now. I think some situation makes NDIS shared usb connnection and an activesync connnection fight for the same usb connection. Some of the actions I exposed befored solved the situation for me. Proobably most of the people wont have the problem beacause They will never connect snapvue with vista (usbtools). Maybe Its a problem for some of the people who converted snapvue on wm6....
Dani
danielherrero said:
I contacted HTC 2 weeks ago asking for a solution but they havent contacted me by now. I think some situation makes NDIS shared usb connnection and an activesync connnection fight for the same usb connection. Some of the actions I exposed befored solved the situation for me. Proobably most of the people wont have the problem beacause They will never connect snapvue with vista (usbtools). Maybe Its a problem for some of the people who converted snapvue on wm6....
Dani
Click to expand...
Click to collapse
Yes that sounds likely. In this case I assume hard resetting WM6 to take it back to SnapVue would solve the problem also.
If anyone has had no problems as we suggest after using uSBtools and/or liberate please post here!
I've never had any of the problems that you've described in this thread... but then I've never installed SP1.
For the past couple of weeks, I've been having issues keeping an internet connection. To describe, I have push email set up so I'm always connected. I seem to get emails fine and I always have an "e" above my signal strength to show that I'm connected. But When I actually want to go to a website, it will connect but after I click on a few links, the next link will just hang. I'm using Opera mini, and after a few pages I get the network test page. Sometimes it will come back and say "you have a working network", and other times it just won't start again.
I was thinking it was just my service (T-Mobile USA) because I use a proxy configuration that's not really ment for full internet access. But I noticed that I was having the same issue when connected to wifi networks. Then I tried PIE and I had similar issues connecting with it as well.
I did just replace my housing. That's the only major change I can think of. I hope this isn't a hardware issue. Anyway, emails still come through but surfing forums has been pretty much shut down. Anyone have any idea of what it could be?
BTW, I've been using the same ROM for over 7 months (O2 Premium Plus) and never had this issue before. No new programs installed since problem either.
With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
sbirsen said:
With internet sharing, my Kaiser used connect to the internet (T-Mobile mobile broadband) without problems fro the past year. Now since I got the HD, my internet connection is inconsistent. Sometimes it tries to load pages for ages, then timeouts, and sometimes it works like a charm. I don't think it's because of the signal, because network coverage seems fine (nearly always at 4 bars with HSDPA).
Has anybody been experiencing something similar ? Don't really think it's a problem related to USB because when my internet connection doesn't work when connected via USB, I sometimes switch to bluetooth, and that seems to work for a while, then it fails again.
I also tried it on a PC with XP, and had similar problems. Any ideas ?
Thanks
Click to expand...
Click to collapse
Hey there,
I'm experiencing the exact same problem with my Touch Diamond ...
My internet sharing via usb has been working fine for months now until this this week. Now, since monday, connection times out, loads half a page, etc. i.e. exact same symptoms as yours.
Internet sharing via bluetooth works fine.
Need help PLEASE!!!
Cheers
[email protected] G
It lasted for a few days and since last week it's working brilliantly as it should. Maybe it was just a network issue ? Did you manage to get your connection to work again ?
I also think it's network related ...
It was working fine again for one day, then it just started acting up again.
I now use the bluetooth connection instead of USB. Seems to be much more reliable and for some reason I'm getting better speeds than via USB.
I always thought USB wud be much quicker.
If only our ISP can get their damn act together.
Thanx for the feedback ..
Cheers
Has anyone found a solution to this problem? I'm having the same exact issue with my Raphael.
Hey... my Problem is the Internet, Data Connection to works fine very fast.... but the Internet Sharing with computer doesnt work anymore since Yesterday... but i dont know why... i flash new ROM and Radio Yesterday soo maybe thats why...
I flash Duttys V2.1 and the 1.12.25.16 radio....
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
O and O said:
Is it at all possible to use internet sharing and activesync or use the phone as a modem while using active sync?
Click to expand...
Click to collapse
So far i know active Sync Closing if you use it as Modem...
So no Sync and modem at all? That sucks, worked great for ym old Nokia.
I have noticed the following problem:
When I use my HD as a modem it functions properly for about the first 15 minutes, then HSDPA icon disappear and remain fixed only 3G icon and the connection becomes very slow.
Similarly this happens even if I use my HD with built in opera browser; besides in this manner I notice that the memory usage increases: even if I stop the internet connection and I delete cache the memory usage remain high and it is necessary to perform a soft reset to fix it.
I've tried with another sim card and GSM operator; with HSDPA and HSUPA enabled and supported by the operator, but I've experienced the same problems.
If I use my old USB or express card wireless modems I have no problems and the connection is always very fast
A ROM upgrade by HTC to solve once and for all this problem will be appreciated !!!