Related
Looking for a Car mount for my Fuze, I'd like for it to charge my Phone while I use GPS.
http://www.expansys-usa.com/p.aspx?i=174282 Carcomm
or
https://www.expansys.com/zoompic.aspx?type=item&i=173938 Brodit
I realize the Brodit Gooseneck would have to be bought separate, but what I'm most interested in is how the USB fits with the phone. I know at least one is custom made for the phone but you never know. Could be shotty manufacturing.
Anyhow, any experiences?
I think the Carcomm looks nicer, but I prefer having the three outputs with the Brodit. The Brodit should allow audio/video output while charging, instead of just charging the phone.
The Brodit would be my choice as well. I could use the 3.5 out to hook up to my car stereo.
Check out ProClip (www.proclipusa.com). I've been using their mounts for more than 6 years. The nice thing about them is that they have units that charge when you place the phone in them, and they can transfer between different vehicles easily -- you don't lose your whole investment every time you trade cars.
Hi,
I am looking to buy a car charger for HTC Fuze
There are so many listed like at Eforcity and BargainCell
would anyone of them is fine?
Is there a decent place other than those two? Above places are just charging more on shipping than the actual cost of the charger
Thanks
The easiest way would be to swing by an ATT or Verizon store.
I do have several and they are all rated 5 V (rarely you'll find 12V) but use one of these. They are pretty slick because you can charge ALL USB devices and, if you travel, it's a "one-for-all" device (meaning I can charge my headset which has a USB cable, iPod Nano and the phone.
http://www.daydeal.com/product.php?productid=10892
If you travel a lot you may look into one of these as well
http://www.bixnet.com/usbbatterybox.html
There is also one which does both, AC and cig. input to USB output, a little bit bulky though, but I couldn't find the link right now.
how is that compared to this one
http://www.amazon.com/Charger-Generation-Antenna-Booster-Google/dp/B001LP2ME0/
Comparison:
They both charge
The one you listed is cheaper (even incl. shipping)
Not that flexible
I don't know what other USB devices you have to charge, meaning if they have different cables for different devices, I do.
The Last Car Charger You Will ever NEED!
This has worked for me so far....total $19.81 shipped (2 to 3 days)
http://www.amazon.com/s?ie=UTF8&field-zipjids=32931&x=8&y=18&field-keywords=Black%20%26%20Decker%20PI100SB&url=search-alias%3Dwireless-aps
tyguy said:
Comparison:
They both charge
The one you listed is cheaper (even incl. shipping)
Not that flexible
I don't know what other USB devices you have to charge, meaning if they have different cables for different devices, I do.
Click to expand...
Click to collapse
the reason I mentioned that one was I could not find anyone for 5V
all are 12V
in your first post in this thread you mentioned you have all 5V ones
http://www.dealextreme.com/details.dx/sku.13522
i bought 1 of these. works great. has 3 inputs and 1 usb port.
My solution to the car charging problem has been a power inverter. You can charge your phone using your house charger, and plug in other stuff at the same time. The last one I bought even had a couple of USB ports so I can use a standard USB cord to charge various devices. Also handy for plugging in my laptop, dvd, tv, etc.
tyguy said:
Comparison:
They both charge
The one you listed is cheaper (even incl. shipping)
Not that flexible
I don't know what other USB devices you have to charge, meaning if they have different cables for different devices, I do.
Click to expand...
Click to collapse
but the one I mentioned is listed at 12V
will it make a difference?
zenithcoolest said:
but the one I mentioned is listed at 12V
will it make a difference?
Click to expand...
Click to collapse
A car's battery is 12v. So when they say 12v, they are referring to input. It should then regulate that 12v to 5v (USB spec). If you are worried that this one does not have this regulator, spend a few extra dollars and get a better one.
A car charger should have a regulator anyway, because your car's alternator can output up to about 20v. For USB devices, it needs to be regulated to 5v, or damage may occur.
Howler82 said:
A car's battery is 12v. So when they say 12v, they are referring to input. It should then regulate that 12v to 5v (USB spec). If you are worried that this one does not have this regulator, spend a few extra dollars and get a better one.
A car charger should have a regulator anyway, because your car's alternator can output up to about 20v. For USB devices, it needs to be regulated to 5v, or damage may occur.
Click to expand...
Click to collapse
so which one would you recommend buying? thanks
types of usb connectors
Hey guys, tell me please are there two types of USB connectors to TP ?
I mean the one is like a regular mini USB and the other is an asymmetric one ? Because i ordered ones a car charger from ebay and got the one with the mini USB connector although my TP has the second one.
This is the one i think of buying http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250434240310&ssPageName=ADME:X:RTQ:US:1123
TP has a special usb head for multimedia etc, but for charging use, your item would be ok.
have not had a look at your ebay link (at work) will go home to confirm
Old Motorola Car Charger
I use the car charger from my old Motorola Razr. It has a charging light and charges quickly, however, the Razr will not charge from the Fuze home charger...David.
It seems that there is an important issue about car chargers, which isn't mentioned in this thread. The HTC car charger is 2 ampere, where othere chargers (like the one I bought on Ebay) or only 0.5 ampere. This is problem when having heavy load on your Touch Pro. It then actually still drains battery while charging.
hello everyone. i'm thinking about using my iconia as my gps for an 11-ish hour road trip i have at the end of the month. i think i found a decent windsheild mount on amazon (had 4 1/2 stars). what i need now is some car power. has anyone found a good car charger for it? or have you used the regular power adapter with a 12v inverter? looking for some personal experiences. thanks for the help.
http://www.ebay.com/itm/Car-Charger-Power-Cord-4-Acer-Iconia-Tablet-A500-10S16U-/250829136633
http://www.amazon.com/Iconia-Profes...182X/ref=sr_1_1?ie=UTF8&qid=1317657074&sr=8-1
Ive used DC to AC inverters with good results. main benefit is most devices ship with AC power supply so inverters will always work. Sort of like a poor mans upwards compatibility guarantee.
AC inverter with stock wall wart FTW. Allows the flexibility to plug anything in, not all my electronics can run off 12v or USB (battery chargers and such). Inverter tucks underneath the passengers seat and runs off the rear seat ciggies outlet. Have a 6 slot outlet strip plugged into the inverter with extra wall warts plugged in for my most used gear.
speeddaddy said:
http://www.ebay.com/itm/Car-Charger-Power-Cord-4-Acer-Iconia-Tablet-A500-10S16U-/250829136633
Click to expand...
Click to collapse
hi
did you use it , is it good ?
i really want one
Humm my mini van has two built in converters. One in the dash.one in the very back where the portable fridge goes.
Wish acer was as thoughtful as CHEVROLET.
But I still love my tablet.
moderater, i have buyed a Car Charger For 10" Acer Iconia Tab A500.it quality is good and use smoothly.
http://witglobal.com/goods-3793.html
Does it realy work?
post man said:
moderater, i have buyed a Car Charger For 10" Acer Iconia Tab A500.it quality is good and use smoothly.
http://witglobal.com/goods-3793.html
Click to expand...
Click to collapse
Sorry to ask because I did buy one like that but for me it is not charging at all (when in use). So, please can you confirm if it works with while using the device?
Thanks
How do you guys charge the x9500 in the car? I need to buy a car charger but there seems to be no such thing on ebay?
I have a car charger for the HTC shift specifically. I think you can use a "standard" netbook carcharger.. If it have the same output.
Best regards
http://forum.xda-developers.com/showthread.php?t=502548
The EPC's charger is exactly the same...
So it's car charger will fit.
Of course a good OEM carcharger will do the trick as well.
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
earlthepearl said:
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
Click to expand...
Click to collapse
Data pins need shorted together, either in the USB cig plug, or some micro USB cables are this way...
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw. Many USB cables use 28 AWG wire for the data conductors, and then you get varying degrees of wire gauge for the power conductors depending on manufacturer. Some people use 28 AWG for both, some use 26, and good cables are made with 24 AWG wire. The thicker wire gauge means less resistance so less power is lost and more can be put into the battery. To pull a proper 1.8A the phone probably should have 22AWG power wire in the USB cable really...
earlthepearl said:
Reading from the AC adapter, this thing can charge at 1.8 amps. I'm doing some research on car chargers that can output 2 amps to the phone via a USB cable, but the trick is getting the phone to pull more than .5 amps from a car accessory outlet. So far I haven't had much luck. There seems to be a lot of info on ipad stuff, but not much in the way of high powered Android devices. So I thought I'd start a thread about compatible car chargers that will allow a full 1.8 amp pull from my car outlet, and see what you guys and gals think and have tried. I've attached a pic of my current setup. It's a Proclip holder on a 2012 Mustang. I've used this same setup for several previous phones (S2 Skyrocket and S3). The holder itself is adjustable to accommodate various phones with cases.
Click to expand...
Click to collapse
Hi, not trying to hijack your thread, but can you tell me which case you are using? I like the fact that it has a large lip around the screen.
Thanks
What model pro clip holder is that? I need to replace the one from my nexus. May hold out for the G2 specific one with the cable built in (like the nexus one I have now), but no telling how long that will be.
mikea3000 said:
Hi, not trying to hijack your thread, but can you tell me which case you are using? I like the fact that it has a large lip around the screen.
Click to expand...
Click to collapse
It's the Body Glove case from the AT&T store. It was the only one they had at the time, and I didn't feel like waiting to order one so I overpaid in exchange for some piece of mind.
stetsonaw said:
What model pro clip holder is that? I need to replace the one from my nexus. May hold out for the G2 specific one with the cable built in (like the nexus one I have now), but no telling how long that will be.
Click to expand...
Click to collapse
It's the holder I ordered for my Skyrocket a few years ago. It's a generic adjustable one that fits a lot of different phones with cases. It has fit my SR, GS3, and now my G2, all with cases.
EniGmA1987 said:
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw.
Click to expand...
Click to collapse
I have a custom 5 inch up angle micro USB cable I ordered from www.usbfirewire.com. It is a very thick wire, thicker than the charging cable the G2 came with. The one in my pic is probably not thick enough for a 2 amp charge.
Here is an interesting article I came across about car chargers:
The Best USB Car Charger
EniGmA1987 said:
Additionally, the USB cable you use needs to have thick enough power wires to support 1.8A charge draw. Many USB cables use 28 AWG wire for the data conductors, and then you get varying degrees of wire gauge for the power conductors depending on manufacturer. Some people use 28 AWG for both, some use 26, and good cables are made with 24 AWG wire. The thicker wire gauge means less resistance so less power is lost and more can be put into the battery. To pull a proper 1.8A the phone probably should have 22AWG power wire in the USB cable really...
Click to expand...
Click to collapse
Spot on. FWIW, the LG OEM cable is 20AWG on the power wires. This is the only viable explanation as I can't get the OEM wall charger to work with any cables I have sitting around (24AWG at best).
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Provided you short the data pins in whatever car charger you buy (if they arent already) and you get a cable with beefy power conductors then you should be able to draw 1.5-1.8A of power through a car charger. You have to make sure the car charger will do what you want though, many 2A chargers also have 2 ports to plug into. What they don't tell you is that each port is limited to 1A and both together will give 2A draw, but not to charge one device. The car itself also may limit power to the charger as well, I know my car specifically says 1.4A max through the cigarette plug. So it is possible to do, it is all just dependent on so many other things that you have to check off the list.
in_dmand said:
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Click to expand...
Click to collapse
That's what I'm trying to figure out. I'm tempted to try that Scosche charger, with my thick USB cable. I installed Currentwidget, so I should be ale to see at what rate I'm charging at if I decide to order it.
in_dmand said:
So would we be better off just using the factory charger with a power inverter or is there an actual car charger that will work?
Click to expand...
Click to collapse
I like the Powergen dual 2.1A USB charger I got off of Amazon. Has served me well. But really, anything 1.8A+ that's quality will do. The trick is going to be the USB cable. Still trying to source one from a reputable site, but you want something with 20AWG for the power. If I find something, I'll post it. Thus far I found two sites, kinda obscure, but not thrilled that the shipping alone costs more than the cables which run $6.
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
EniGmA1987 said:
Provided you short the data pins in whatever car charger you buy (if they arent already) and you get a cable with beefy power conductors then you should be able to draw 1.5-1.8A of power through a car charger. You have to make sure the car charger will do what you want though, many 2A chargers also have 2 ports to plug into. What they don't tell you is that each port is limited to 1A and both together will give 2A draw, but not to charge one device. The car itself also may limit power to the charger as well, I know my car specifically says 1.4A max through the cigarette plug. So it is possible to do, it is all just dependent on so many other things that you have to check off the list.
Click to expand...
Click to collapse
I suspect the phone can detect the charger capacity because my OEM LG cable works on both the Apple and Non-Apple ports on the Powergen charger. Since that's the case, the phone doesn't seem to care if the data pins are shorted or not. And the Powergen is advertised as 4.2A total, so 2.1A per port.
kyler13 said:
I like the Powergen dual 2.1A USB charger I got off of Amazon. Has served me well. But really, anything 1.8A+ that's quality will do. The trick is going to be the USB cable. Still trying to source one from a reputable site, but you want something with 20AWG for the power. If I find something, I'll post it. Thus far I found two sites, kinda obscure, but not thrilled that the shipping alone costs more than the cables which run $6.
Click to expand...
Click to collapse
Something worth considering is looking at charging cables labeled for tablets. They usually charge in this amperage range. I plugged my g2 into my kindle fire HD charger (1.8A) and didn't get any slow charge warnings.
Geekybiker said:
Something worth considering is looking at charging cables labeled for tablets. They usually charge in this amperage range. I plugged my g2 into my kindle fire HD charger (1.8A) and didn't get any slow charge warnings.
Click to expand...
Click to collapse
Doesn't that come with the same Amazon branded usb cable you can get by itself? Take a look on the cable. A lot of times they label the wire gauge.
Sent from my VS980 4G using Tapatalk 4
my amazon branded micro usb cables are 28awg and they still allow quick charge with oem wall charger.
The charging issues associated with this phone has been a huge PITA. I've been carrying my stock cable around just so I can charge my phone!!! Subscribed so I can maybe help out with some info...
bova80 said:
my amazon branded micro usb cables are 28awg and they still allow quick charge with oem wall charger.
Click to expand...
Click to collapse
Are you certain that's not just the data side that is 28awg? Very surprised you can pull 1.8A at 28awg.
Sent from my VS980 4G using Tapatalk 4
kyler13 said:
Doesn't that come with the same Amazon branded usb cable you can get by itself? Take a look on the cable. A lot of times they label the wire gauge.
Sent from my VS980 4G using Tapatalk 4
Click to expand...
Click to collapse
They are unmarked.