I read thread somewhere and have tried to search many times over and can't seem to find it again.
Here's the issue. When I have a bluetooth device or even a corded headset -- people complain that I sound tinny. I know it's not the corded headset because I use it with my landline and it sounds perfect (it's a nice plantronics headset).
I saw someone mentioning a 'fix' before. I know there is the audopara fix but as I understand it that's just for volume. I'm not sure my volume sounds bad. I also don't even know if I need audiopara fix with DCD 2.3.2.
Anyone have any suggestions?
P.S. Is there any way to get a battery life icon on the desktop or today screen?
Related
And they suck. my clock radio has better sound, i installed the A2DP cab file i can listen to music but its awful! Am i just missing something? Is there something im overlooking that can fix this? I hear people love these headphones. I actully read one post saying its the chipset in these headphones that doesnt work well with the 8125? Music sounds distorted and i keep hearing noise. Any truth to that? please help! Surely this isnt as good as it gets. thanks!
Same prob here. The sound is terrible.
But how is your sound when you connect it with the audio cable, is it still crap? Because mine is a bit better then.
I went back to the store with this problem and they said it wasn't normal and it must be my phone, but i douped that.
Has anybody have a clou?
Would the Motorola HT820 headphones work on Trinity?
They're working fine for me; the only tweak I did was to disable the JointStereo so I have proper stereo audio - there are a million threads about that around here, it's in the registry.
I have the SYN0948D model of the HT820, which I think is the newest, for previous ones there's a flash firmware update that may fix some skipping.
oh! Mind answering some questions for me?
How are they for music? Sound good? Any major problems? I use TCPMP for music.... will the controls work that are on the headphones themselves? How about the battery life (of the phone and the headphones?).
It seems the headphones also have a mic? Does that work with the phone?
Id appreciate if you could answer these for me... thanks!
The sound quality for music is certainly not what I'd call perfect.
Put it this way: I attached them using the supplied 2.5 -> 3.5 mil connector to my high-end audio card in my PC, and they sounded pretty good for headphones of their size.
However, when running over Bluetooth there is a noticeable drop in audio fidelity. I don't know whether to attribute that to the Trinity or to the headphones, but I suspect the Trinity. Maybe it's downmixing the audio?
There is a lot of A2DP tweaking you can do to find the best balance between audio quality and skipping/reception; I left it fairly close to the defaults for now, and I'll probably play with it more later.
The mic works with the phone and the audio quality for voice calling is outstanding. It sure makes a difference to hear a person in both ears - when I use them I almost never have to ask a person to repeat themselves. I haven't heard what anyone else sounds like when calling from the Ht820s, but friends say that they can hear a slight echo depending on the room I'm in. Makes sense because the room I usually call from is a smallish office/den with wood floors and lots of echoes.
I am going to fire up TCPMP right now to try to play a song with it. I've been using PocketMusic but it sucks balls...
Plays the song just fine, but it doesn't seem to support the next/prev track buttons at all. I tried to map them in the Hot Keys section, no dice.
PocketMusic and WMP both seem to work with the buttons, for what that's worth.
If you need anything else, just PM me like last time.
Yah I tried pocketmusic... it blows. I use tcpmp for everything. I suppose I can just use the controls on the phone itself.
I currently use the shure buds.... I hope Im not too used to the great quality ive been getting on them.
I don't know if this is a fault or something I didn't expect but would be glad to here how others have found it.
I have had the ameo for a few weeks and have noticed that if I use a bluetooth or wired headphone everything seems to be fine on a phone call. However when I try to use it as a speakerphone, whoever I am speaking to complains that my voice is breaking up (I have a strong signal strength). It appears that if there is any response from the person I call or any noise in their background then the microphone at my end is interrupted making my voice unintelligible. I know the manual says to use a headset but what is the point of having a speakerphone if you can't use it? Does anyone else have the same problem or have I got a faulty unit?
bobg said:
I don't know if this is a fault or something I didn't expect but would be glad to here how others have found it.
I have had the ameo for a few weeks and have noticed that if I use a bluetooth or wired headphone everything seems to be fine on a phone call. However when I try to use it as a speakerphone, whoever I am speaking to complains that my voice is breaking up (I have a strong signal strength). It appears that if there is any response from the person I call or any noise in their background then the microphone at my end is interrupted making my voice unintelligible. I know the manual says to use a headset but what is the point of having a speakerphone if you can't use it? Does anyone else have the same problem or have I got a faulty unit?
Click to expand...
Click to collapse
I get this on full volume in a small room. Turning the volume down a bit usually seems to solve it. I think the mic is pretty sensitive and can get flooded a bit too easily.
bobg said:
I don't know if this is a fault or something I didn't expect but would be glad to here how others have found it.
I have had the ameo for a few weeks and have noticed that if I use a bluetooth or wired headphone everything seems to be fine on a phone call. However when I try to use it as a speakerphone, whoever I am speaking to complains that my voice is breaking up (I have a strong signal strength). It appears that if there is any response from the person I call or any noise in their background then the microphone at my end is interrupted making my voice unintelligible. I know the manual says to use a headset but what is the point of having a speakerphone if you can't use it? Does anyone else have the same problem or have I got a faulty unit?
Click to expand...
Click to collapse
I have used both the Ameo and the Dopod rom on the same device and can conirm that this problem is worse on the Ameo rom
Could other dopod users tell their experiences regarding hands-free calling
bobg said:
I don't know if this is a fault or something I didn't expect but would be glad to here how others have found it.
I have had the ameo for a few weeks and have noticed that if I use a bluetooth or wired headphone everything seems to be fine on a phone call. However when I try to use it as a speakerphone, whoever I am speaking to complains that my voice is breaking up (I have a strong signal strength). It appears that if there is any response from the person I call or any noise in their background then the microphone at my end is interrupted making my voice unintelligible. I know the manual says to use a headset but what is the point of having a speakerphone if you can't use it? Does anyone else have the same problem or have I got a faulty unit?
Click to expand...
Click to collapse
I experienced something similar but only when the caller has a lot of background noise on their end. It's not a consistent problem here so I assume it's not the same issue you're having.
Thanks for the replies - it looks as if the unit is working to spec but that there is a 'built-in' problem when using the phone as a speakerphone. I didn't get this on the spv2000 I replaced with the ameo so wasn't expecting it. Background noise does seem to trigger it - I just tried phoning using the speaker phone to call an answerphone and it worked fine with clear audio at the other end. I think a day or 2 of playing with the volume to minimise the problem is the next step. I'll post back when I can be more definite but would be grateful for any other opinions.
Cheers
BobG
On my U1000 the mic works fine in speakerphone mode. There are no brakeups of voice even while walking mid-traffic. Yes, I have to speak loud but that is expected with background noise over 85db.
However, the speakers do not return sound very loud at all (for a speakerphone). I have to lean way forward and almost put my face on the screen to be able to clearly hear the other side (even in a totally quiet environment).
Would have been great to have had a decent speaker phone, but as it is I'm sticking to my bluetooth headset.
The 2 drawbacks with bluetooth is the answer delay, it takes a good 1 second before the connection is established between the headset and phone. The second thing is the sensitivity of the mic, it picks up everything that goes on around you, and drowns out your voice. I have to move the mic close to my mouth if there is other noises going on around me (but this is most likely a bluetooth headset problem, and not related to the U1000).
OK several calls later and after fiddling about with the volume I've found that the best way for this problem to be overcome is to set the 'in call' volume to its lowest! I've also set the main unit volume to about 40% but that shouldn't really have any effect. It's odd that the best way for the speakerphone to work is on minimum volume - fine for single calls but not much use if I want a few other people to listen in. However this is a very small problem now and the benefits of this device hugely outweigh this small drawback.
Alright, don't know when this started but I currently have Duttys HGR1.
The problem is that when I have the standard headset (that came with the TD2) the ringtone is played in the headset, so if I have the phone on my desk I can barely hear when there's an incoming call. Worse is, that if the phone is in another room I can't hear it at all.
I have tried different headsets but all with the same problem. When I unplug the headset it's all working as it should.
Can you please post your experience on this, how's it working for you?
I haven't experience it with my TD2, but for me it's OK like that. It was just like that on my previous phones, Nokia, SE...
Logicaly is if you have attached headset that headset should be on head and listening, not disturbing anyone arround.
This is my thinking, I would like to read others also.
uhm...just unplug your headset while sitting on your desk? or any time you AREN'T using it...seriously, the effort of plugging in a mini USB jack is...minimal...to say the least.
I use bluetooth stereo headphones that have such good ear buds, that if my phone WERE to ring loud and not via the headphones, i wouldn't hear it!
Thank's for you input guys.
Might sound like a non-issue but to me it is since I have to connect and disconnect the headset maybe 20 times a day and eventually the usb-port will give up.
I could understand that this is the way it's supposed to work, but before upgrading the ROM (I think that was when this changed) it worked just like I wanted it to.
So my hope is that there is a registry setting for this. If it is, please share! That would really help me out!
Leban,
I can sympathise with you. I have a similar problem. In my car, my car cradle is an FM transmitter and charger. Therefore, my TD2 thinks it is a headset, so all sound is sent through the transmitter. This is great if I am listening to music through the car radio, but often I am not. Therefore, the only way I can tell if there is an incoming call or email or SMS is by looking at the screen. I would like the sound for these notifications to come through the external speaker even if it is connected to the transmitter.....
We all use our phones differently don't we, so Drag-on, don't assume we are all like you.
mitsi said:
We all use our phones differently don't we, so Drag-on, don't assume we are all like you.
Click to expand...
Click to collapse
i completely agree, i just couldn't think of a practical, real-life example where one would need to change where the ring came out of. You did that for me
I am quite sure it IS do-able...i'll ask around.
Drag-On said:
i completely agree, i just couldn't think of a practical, real-life example where one would need to change where the ring came out of. You did that for me
I am quite sure it IS do-able...i'll ask around.
Click to expand...
Click to collapse
Nothing new here? Would be really great if this was possible to change!
This "feature" drives me crazy
Another example is when I'm in my car, if I have the phone enxt to me I can't hear the ringing. And NO, I don't want to sit for hours in my car with the headset in my ears
Tried to ask in another thread but it was kinda off topic.
Last I knew people were playing with diagnostic codes but there was no consensus on what did or did not work.
Audio from the headphone jack and seemly the blue tooth was too quiet.
Is this still an issue?
Is that a no?
In all truth, i don't use the bluetooth. But i just checked my headphones, and they sound OK. My sony earphones work great on the phone. I did d/l that one app... Media Volume Settings and set the volume all the way to 100...that may be what is making mine work better. Hope this helps!
haven't tried Bluetooth...
But when i tried headphones it was waay to loud even at 1.
I don't know how to lower the volume using codes.
You should look through the diagnostics codes thread. It has some stuff about sound changes in there as well as some of the registry tweaks you should look up if you're unhappy enough with it to need to change something.
Funkadube: I did and couldn't seem to get any reliable change. Plus having to redo it everytime I restarted the phone seemed crazy.
I know when I had mine the volume level out of the head phone port was NOT loud enough when hooked to my car radio even though every other phone I've ever had was. You'd have to goto MAX VOLUME to get it very loud and if it was a quiet song or something not at loud (I'm staring at YOU SLACKER RADIO) then you could barely get it listenable.
I then installed Bluetooth module into the car and had the same issue with it also.
I'd wish I knew someone with one I could test IRL to see if its still a problem. I'd love to switch back to WP7...
Is there a way to boost the out-of-call Bluetooth volume on the Samsung Focus? Between builds 7712 and 7720, the Bluetooth volume for voice dial responses, TellMe, and text-to-speech were drastically reduced and now they are so low that I can't hear them with the phone turned all the way up to 30/30. I used to use the phone at 20/30 with my car's Bluetooth without a problem on 7712 and 7390. Has anyone else noticed this change since upgrading to 7720?
I didn't see other people complaining about the volume in the accessories thread.
I also have a bt headset and works fine for me.
EnderPsp said:
I didn't see other people complaining about the volume in the accessories thread.
I also have a bt headset and works fine for me.
Click to expand...
Click to collapse
I have a Bluetooth headset and it isn't as bad with the headset. But the text-to-speech is still significantly lower than call volume. In fact, the real issue is that there's a huge imbalance between the out-of-call volume and in-call volume with Bluetooth headsets in 7720.
As I mentioned before, when the phone is paired to the car I can turn the phone up to 30/30 from 20/30, but I still have to boost the volume from the car side about 5 levels higher when I'm out-of-a-call to get any decent level of audio out of the phone. The problem then is that when I take a call it is way too loud and I have to rush to turn down the volume on the car side. It makes the use of the feature so inconvenient that I've just turned it off. While I would be perfectly content with Microsoft returning volume levels to what they were since 7004, I'd just as readily use the Samsung Diagnostic app to make the adjustment myself, if it is possible. I'm looking for any remedy at this point.
Text-to-speech was the feature I was looking forward to the most in Mango, and now it's the only feature of the OS I can't use. I can't express how frustrated and disappointed I am that this has happened, and I just can't understand why this change was made. I've seen no reports of anyone ever complaining that the volume was too loud before 7720. It's one thing if I was seeking a feature that wasn't implemented, but it is implemented and it's broken. I just wish there was some solution or recourse to make it usable again.