touch cube, did i have this. - Touch Cruise ROM Development

hello all
did i have touch cube on my device, or i need to install this, can some help me and tell what i need to enable/install touch cube, where i can find cab file to install touch cube
thanks
sorry my bad english

If you're using the stock ROM, then yes you have the cube (swipe your finger from the bottom of the screen up).

i have original swedish rom.
can i install touch cube, wherre can i find cab file to install.
thanks.

Can check your registry to make sure it's not disabled:
HKLM\Software\OEM\TFLOSettings (should have a 1, not a 0)
You can also try this flash-based cube clone: http://forum.xda-developers.com/showthread.php?t=336234
But if your ROM is stock, there is no reason why the cube wouldn't be included??

Not sure if this will help, but can try the cab from here: http://forum.xda-developers.com/showpost.php?p=2484400&postcount=45

yes its enabled, but i can get this to work with finger , to get this work i need to swap with pen WERY fast from bottom to the top,and when i add people to the fast dial it dont ask after picture?

You should be able to use your finger, not just the stylus.
For your favorites, you have to add the photo to your contacts.

i juse my finger a little hard, start at the htc logo, and push the finger up

Related

TouchFlo implementation on Mogul

Given that I believe the hardware as far as the touchscreen itself goes, are there any plans to try and migrate the TouchFlo / TouchFlo II ROM or application layer over so it'll work with the Mogul?
I love the Touch Flo's inteface, but there's no way I would ever give up my full keyboard.
You can find the touchflo application at this post
http://forum.xda-developers.com/showthread.php?t=334965&highlight=pcm+keyboard
Make sure to download a4, this is the most recent release. Also, read the entire first post before installation. I have the HTC 6800 (mogul) from sprint and I successfully installed this software this morning.
I have also installed A4 on my mogul. It is running great! I modified the config file a tiny to give a longer delay and to add SSContact.
Where is my cube?!!!
I can get the touch scrolling to work but still cannot figure out the cube. I can access the audio manager and the home screen (with tabs) but do not see any of the other full screen touch menus or animations.
I have installed the following files:
FTouchFlo_a4.CAB
HomePlugin WM6.cab
HTC_Audio_Manager.cab
HTC_Audio_Manager_Today_Plugin.cab
JT ButtonFlo.cab
Touch Flo (Alpha).cab
Touch Settings v1.22.CAB
I changed the registry key so that audio manager is the music player and also deleted the bio.lnk and mediahub.lnk from the windows/startup. I even went as far as to copy .brn files to make sure they were there. Even Touch settings is working fine.. BUT any time I slide LR or click the button I get the stupid black screen. (WTF, it is killing me!)
Has anyone figured this out on Sprint Mogul???
I didn't try too hard on the cube because I couldn't get the gestures to work. Maybe this is something that will be improved in later versions.
jpshook said:
I can get the touch scrolling to work but still cannot figure out the cube. I can access the audio manager and the home screen (with tabs) but do not see any of the other full screen touch menus or animations.
I have installed the following files:
FTouchFlo_a4.CAB
HomePlugin WM6.cab
HTC_Audio_Manager.cab
HTC_Audio_Manager_Today_Plugin.cab
JT ButtonFlo.cab
Touch Flo (Alpha).cab
Touch Settings v1.22.CAB
I changed the registry key so that audio manager is the music player and also deleted the bio.lnk and mediahub.lnk from the windows/startup. I even went as far as to copy .brn files to make sure they were there. Even Touch settings is working fine.. BUT any time I slide LR or click the button I get the stupid black screen. (WTF, it is killing me!)
Has anyone figured this out on Sprint Mogul???
Click to expand...
Click to collapse
Well this Flash version of the Touchflo 3D Cube it seems to work really well so far on my mogul, like I said it's not the real cube but it's really neat just the same.
http://forum.xda-developers.com/showthread.php?t=328010&highlight=ByKa+Cube+Launcher
Yeah, Byka's Flash version is cool, but it uses lots of system resources and just isn't quite the same.
Someone having the black screen issue has to have found a fix by now?
I've tried the BYKA cube but it jsut looks tacky. It works great but I guess I just have a problem with the icons and the background. Slither is working on a cub which looks exaclty like the TOUCHCUBe but it still has a way, although he's working very diligently. I would love to see the original cube, hopefully some cab extracted in combination with the touchfloa4. That would be ideal.
I tried it yesterday and was not impressed. So I installed SPB Pocketplus V.4 which also has "touch" features and works much better to be honest...
this is from my post in: http://forum.xda-developers.com/showthread.php?t=333513
BEGIN
I got this working on my mogul (close to barebones w/o ext_rom) seemingly perfectly... I did it on a fresh hard hard reset because of some conflicting software and my remove programs list being blank (this is not related to anything with touchflo btw... so don't worry)... I mapped touchflo.exe (on Ftouchflo) to left-right(to make cube both initialize and rotate with my finger dragging left right) and it works like a charm! I also mapped up-down to efrost's minimize program(efrostminimize.exe) that I got from Slither's cube, this brings me back to the Today screen. Not sure what the "ns.exe" is for in your config files but it seems to be working fine for me so far following the instructions. I'm thinking with the mogul black screens there must be a conflicting software involved.
I only have:
HTC plugins + Audio/Comm Manager
Total Commander
TCPMP+FlashVideo
PHM_Reg
Memmaid
Palm Msging
Oxios
Slide 2 Unlock 2 0.53
Ftouchflo alpha 4
Adobe Flashlite 2.1
Edit: Be careful how fast you retry using finger swipes upon the initial initialization (from closed) as it will run two instances if the touchflo did not fully initialize yet. (they both load though... phew* still no black screen)
Edit 2: Remember, if you map left-right and use Slide 2 Unlock 2(S2U2), to exclude s2u2.exe in the Ftouchflo config.
will post if black screen comes up in the future
I w as going to try this after midterms, how is it working? Is it pretty awesome? Is it worth it? does it bogg down your system? Are you afraid of installing other apps for fear of it "blacking out"? I'm very interested in the cube but it seems out of reach right now because of the bugs.
wandrerx said:
this is from my post in: http://forum.xda-developers.com/showthread.php?t=333513
BEGIN
I got this working on my mogul (close to barebones w/o ext_rom) seemingly perfectly... I did it on a fresh hard hard reset because of some conflicting software and my remove programs list being blank (this is not related to anything with touchflo btw... so don't worry)... I mapped touchflo.exe (on Ftouchflo) to left-right(to make cube both initialize and rotate with my finger dragging left right) and it works like a charm! I also mapped up-down to efrost's minimize program(efrostminimize.exe) that I got from Slither's cube, this brings me back to the Today screen. Not sure what the "ns.exe" is for in your config files but it seems to be working fine for me so far following the instructions. I'm thinking with the mogul black screens there must be a conflicting software involved.
I only have:
HTC plugins + Audio/Comm Manager
Total Commander
TCPMP+FlashVideo
PHM_Reg
Memmaid
Palm Msging
Oxios
Slide 2 Unlock 2 0.53
Ftouchflo alpha 4
Adobe Flashlite 2.1
Edit: Be careful how fast you retry using finger swipes upon the initial initialization (from closed) as it will run two instances if the touchflo did not fully initialize yet. (they both load though... phew* still no black screen)
Edit 2: Remember, if you map left-right and use Slide 2 Unlock 2(S2U2), to exclude s2u2.exe in the Ftouchflo config.
will post if black screen comes up in the future
Click to expand...
Click to collapse
it works fine... no real big load on system resources (it was designed for a slower processor actually). No, I'm not really afraid of installing other programs. I was just stating that it's obvious that all those people complaining about black screens have something that conflicts with the cube somehow (or they didn't install according to instructions). Most likely something that runs in the background...
wandrerx, how do you actually get the cube? What application does it get installed with?
Can you send links to the exact apps you are running that are minimum requirements for this to work?
The original detailed instructions (by mikewtw) and files are in: http://forum.xda-developers.com/showthread.php?t=333513
This is really just a summary of instructions and issues since it's getting messy there...
You need all the files from the original instructions:
TouchFlo.zip
AL_xx_Touch.zip
Touch Settings v1.22.CAB
Installation:
Prereq (To be installed first...):
HTC Home Plugin - I used the one from here... http://forum.xda-developers.com/showthread.php?t=319308
HTC Audio Mgr - I got it from the touchflo.zip
HTC Audio Plugin - I got it from the touchflo.zip
Installation Process
1)Install "Touch Flo (Alpha).cab"
2)Install "JT Buttonflo.cab" (This is needed because it causes a script to run at startup which makes it actually work)
3)Install "Touch Settings v1.22.cab"
4)Delete "Mediahubmini.lnk" from "\windows\startup"
5)Unzip all of the files from "AL_xx_Touch.zip" to "\touch" (this step may not be needed but it was mentioned in the original post and I did it anyways)
6)Copy those "AL_xx_Touch.zip" files into "\windows"
7)Now might be a good time for a soft reset
8)Run "Touch Settings" from programs once but do not touch anything just yet... click on save option at the bottom" (this step apparently saves the icons you just installed so they'll appear... I think)
9)Soft reset
Touchflo is now installed you can either:
A) Map it to a button thus making it buttonflo
B) Install Ftouchflo Alpha 4 and use the touch screen to launch and rotate left to right (one way only currently)
If you decide to use Ftouchflo Alpha 4 I've enclosed:
"FTouchfloConfig.txt" - To be copied into "\Program Files\Ftouchflo_a4"...this also makes it compatible with s2u2
"efrostminimize.exe" (by efrost duh!) - To be copied into "\windows"
FTouchflo usage:
Using my config you can bring up the cube by swiping down-to-up (like the real one) or you can do the same going left to right. You can also minimize the cube by swiping up-to-down(via efrostminimize.exe)
Notes:
1)Upon initial run from either being closed or soft reset, try not to swipe it activated too much otherwise it will open twice. Once started swipe all you want. Of course you could just activate touchflo another way first.
2)Installing Touchflo alpha takes away HTC Home contacts
3)This does not seem to be a killable app via "memory"
4)I'm trying to figure out whether I can make some script to make it run smoother
5)Audio Mngr seems to be the only resource killer as it also loads into the cube
5)Yes it only goes one direction, this was a modified touchflo designed to work with buttons. As I said, this is the one we have to use till a cooked rom with the cube comes out.
6)This does not run on initial boot, you've got to either run it from Ftouchflo or "touch flo" in programs
7)If you run "Touch flo" without button mapped or "Ftouchflo"(configured for it) it will stay on the first screen
8)Can also be minimized by using the "red hangup button" (buttonflo-method as opposed to using my config for Ftouchflo)
9)Using HTC Home Plugin Customizer requires a soft-reset because it disables the Home Plugin temporarily
7)Icons not installed correctly is one very big cause of black screen
8)Conflicting programs may also be a reason for black screen as I did this all on a hard reset
Ftouchflo Alpha4
http://forum.xda-developers.com/showthread.php?t=334965
Followed these steps exactly. 3 attempts, 3 blackscreens. 0 fun. Guess we'll just have to wait for a rom...
jbmoneys said:
Followed these steps exactly. 3 attempts, 3 blackscreens. 0 fun. Guess we'll just have to wait for a rom...
Click to expand...
Click to collapse
thats pretty humorous.
Please Help Me Understand!!
Ive installed the touchflo a4, that's the most recent one. but what is touch flo alpha, does it go with the touch flo app I installed? what is the cube, was I suppose to install all three together? right now the app works fine but when im scrolling on the net it accelerates out of control. how do I slow it down? Please respond..
Ncruze said:
Ive installed the touchflo a4, that's the most recent one. but what is touch flo alpha, does it go with the touch flo app I installed? what is the cube, was I suppose to install all three together? right now the app works fine but when im scrolling on the net it accelerates out of control. how do I slow it down? Please respond..
Click to expand...
Click to collapse
dont get the a4 get touchflow v1.3 from the link below.
http://forum.xda-developers.com/showthread.php?t=338143
if you want a cube, I highly recommend slithers cube.
http://forum.xda-developers.com/showthread.php?t=336234
I have been using both of these programs and they work together flawlessly on the Mogul
HTC HOME vs. the Cube
For anyone who has tried both.
I am currently running the HTC Home on mine and it works very well. Power consumption is normal. Good quick response. No complaints overall.
However, I am somewhat intrigued by the Cube and have been contemplating trying it out.
How is the CPU/Power consumption. Responsiveness. Stability? Thanks for your thoughts in advance.
Michael
Stability
I have tried both the Home plugin and the cube. If youuse the home plugin, do a search for the six tab "fixed" kaiser plugin. Fixes some memory leaks and has more functionality. The Cube here is very unstable and not too quick. I had to hard reset to get it to work, and it will not work with some other apps installed. For me, it would not work with SPB Pocket Plus. I would recommend getting the cube Slither has in development. It runs on flash, is quick, and does not seem to have compatibility issues.

Tips/ instructions on using touchflo/ cube

Very new to this and how it works, so far ive come across scrolling and this cube thing, but i havent found much information on besides youtube videos demonstrating not explaining, i do have a touch rom installed though
You have to make sure the rom you have installed even HAS the cube. Most cooks named their rom versions using the word TOUCH, but they may not necessarily include the cube... so look thru the rom info from the download post and see if its included in the rom u have.
First go into the cube settings, and set up the gesture you want to use to activate the cube
you have to set a shortcut to the aplauncher.exe which is located in the windows dir somewhere ... such as one of the soft keys or a link in programs.
When you run that shortcut, you'll notice ur flicker or something strange .. if I remember correctly, the X at the top right would dissappear. When that happens. you just slide your finger across the screen in the method you set up under the first step of what I wrote.
Most tutorials you see on youtube are an actual HTC TOUCH device ... which has an extra button that serves the sole purpose of running the applauncher.exe to bring up the cube. For all of us that don't have that actual device, we have to set the shortcut somewhere else in order to be able to activate it

plzzz can anyone tell me where to grt cube for my cruise!~

plzz i dont have cube on my device! can anyone tell me where to get it? and how to install?
What do you mean you don't have? Do you mean to say that when you swipe your finger from bottom of the screen up, the TouchCube doesn't launch?
TouchFlo - Cube - CubeSettings
Athanaso, I would mention that this actually is FTouchFlo and not the original TouchFLO.
gishan, did you flash a non-cube ROM and want the cube or do you just not know how to get to the cube?
thankx!
i got cube! problem is i dont know how to use!!! coz ma cruise came with dutch version!!!!
thankz guyzzzzzzzzzzzz
There was a transparent sticker on your screen which you had to rip off. It showed the instructions to get to the cube. There are dozens of movies on youtube and other places which show how to get to the cube. Slide your finger across the screen, starting at the very bottom sliding upwards.
http://www.youtube.com/watch?v=Cfc8CllDk2U
http://www.youtube.com/watch?v=LlRVh8oA1rw

Quick "Cube" Question

For some reason when i try install Skins for the cube, the side of the cube with the 6 options never gets skinned, but the contacts side and the side with the 3 options (music, photos, and videos) does.
So far i've tried poorly ducks vista cab and someone else's cab to install, the install's went smoothly but both didnt skin the side with the 6 options. What am i doing wrong?
refthemc said:
For some reason when i try install Skins for the cube, the side of the cube with the 6 options never gets skinned, but the contacts side and the side with the 3 options (music, photos, and videos) does.
So far i've tried poorly ducks vista cab and someone else's cab to install, the install's went smoothly but both didnt skin the side with the 6 options. What am i doing wrong?
Click to expand...
Click to collapse
This happened to me all the time, the original cube is a pain! Your best bet is to remove it and use Slither's, check below for Tips & Tricks.
Somehow i knew you were gonna answer my question TheChampJT, haha, so how difficult is the install on that Slither? would it open the same way the original cube would open? with the swipe of a finger....
refthemc said:
Somehow i knew you were gonna answer my question TheChampJT, haha, so how difficult is the install on that Slither? would it open the same way the original cube would open? with the swipe of a finger....
Click to expand...
Click to collapse
LOL! I try to help where I can.
By removing the cube, you'll save the memory and the hassle of it opening in apps like S2U2.
What you can do is use the FTouchFlo, which is better than the stock TouchFlo. Also install the FtouchFlo config tool. Then you can disable TouchFlo. Then in the config tool, you can set the cube to open on a swipe gesture.
It's an upgrade all the way around in my opinion, and much easier to cusomtize, since there are a few skins available.

Looking for BEST BLACK KEYBOARD!! - SOLVED AND FOUND BETTER!!!!

Looking for the black keyboard in yota contacts to be used as all keyboards. Essentially i want Diamond original to be black
****************************
Allright LADIES and GENTS, Found THE nicest KEYBOARD in BLACK!
Step 1: Unzip File and copy the unzipped folder directly under PROGRAM FILES on you DEVICE (not INTERNAL)
Step 2: Run fingerkey_register file and select yes!
Step 3: Reboot Phone, and under SETTING, KEYBOARD select Finger Keyboard for Default keyboard
** If you dont like the PGDN buttons on the bottom, no fear
Rename SKIN file in SKINS DIR to SKIN3 and rename the rename SKIN1 to SKIN.
The page down buttons will now appear on the 123 page.
PS Found that on Touch HD ported roms, everytime you reboot phone it defaults to TOUCH KB, so just hit keyboard button at bottom and select finger. If anyone can fix this that would be great!
TO REMOVE - Unregistered it, then soft reset. Now go and delete the entire FingerKeyb folder. That should remove it all.
If the yota keyboard could be used as the normal keyboard is would be awesome!
IT CAAAAAAAANT!!!
does the yota phone use the normal diamond type keyboard for the rest of windows?
I inverted colours in some keyboard files now, I'll post them in few days, when I edit all of them.
That looks amazing keemot, im looking forward to it
Kemot320 said:
I inverted colours in some keyboard files now, I'll post them in few days, when I edit all of them.
Click to expand...
Click to collapse
Please upload when your ready !
I LOVE THIS !!!
Kemot320 said:
I inverted colours in some keyboard files now, I'll post them in few days, when I edit all of them.
Click to expand...
Click to collapse
wow nice think you can make the phone keypad like this too or u doing all the diamond keyboards thanx again for sharing
Hey.
does it exist anything able to make the keyboards on Diamond ROM 203 swe to become black? i've tried alot of things and it always ends with a Hardware reset.
would have been nice with a black skin for the Dial app too. now i'm using assets_black dial, but i need to copy the file after each soft reset.
finally,
I'm deeply impressed by all the hard work you guys have done, to develop some amazing apps/skins for the Diamond.
awestby said:
Hey.
does it exist anything able to make the keyboards on Diamond ROM 203 swe to become black? i've tried alot of things and it always ends with a Hardware reset.
would have been nice with a black skin for the Dial app too. now i'm using assets_black dial, but i need to copy the file after each soft reset.
finally,
I'm deeply impressed by all the hard work you guys have done, to develop some amazing apps/skins for the Diamond.
Click to expand...
Click to collapse
du svesnk men go look in Nisse's rom nice for you to join all of us here
Looking nice
Look at the first post for the NICEST and BEST (I ASSURE YOU) Black keyboard. If some can solve how to get it to be default KB on Touch HD ports, that would be great. Read all of Post 1 before asking questions...thanks and thats to the CREATOR
here is the HD thread for those who want screenies...it looks very nice indeed
http://forum.xda-developers.com/showthread.php?t=479464
waiting to test it (TP is away for screen replacement lol)
@ Kemot320
Dude! Could you possible invert the whole Touch Diamond small keyboard and upload the files!
i found this cab at ppcgeeks install it and go to programs and run it set this new keyboard as the default and set the delay to 30 it is the only way i can get it to work hit ok and soft reset your phone and when it starts the phone will default to this new keyboard!!!!!!! NOT the small touch keyboard
Dude is awesome. Congratulation and please keep it alive.You are the man!!!!
VarioIII said:
Looking for the black keyboard in yota contacts to be used as all keyboards. Essentially i want Diamond original to be black
****************************
Allright LADIES and GENTS, Found THE nicest KEYBOARD in BLACK!
Step 1: Unzip File and copy the unzipped folder directly under PROGRAM FILES on you DEVICE (not INTERNAL)
Step 2: Run fingerkey_register file and select yes!
Step 3: Reboot Phone, and under SETTING, KEYBOARD select Finger Keyboard for Default keyboard
** If you dont like the PGDN buttons on the bottom, no fear
Rename SKIN file in SKINS DIR to SKIN3 and rename the rename SKIN1 to SKIN.
The page down buttons will now appear on the 123 page.
PS Found that on Touch HD ported roms, everytime you reboot phone it defaults to TOUCH KB, so just hit keyboard button at bottom and select finger. If anyone can fix this that would be great!
TO REMOVE - Unregistered it, then soft reset. Now go and delete the entire FingerKeyb folder. That should remove it all.
Click to expand...
Click to collapse
Mate this keyboard rocks! I love it.
Didn't work for me. Diamond with AZTOR X. Install it, switch to finger keybaord and it don't show
nice job on the ported HD black KB.works well on my diamond.
But I'm expecting this on my diamond....
dobb said:
Didn't work for me. Diamond with AZTOR X. Install it, switch to finger keybaord and it don't show
Click to expand...
Click to collapse
try to copy out the 2nd folder in FingerKeyboar... to device's Program Files. It works for me after doing so.

Categories

Resources