Tips/ instructions on using touchflo/ cube - Wing, P4350 General

Very new to this and how it works, so far ive come across scrolling and this cube thing, but i havent found much information on besides youtube videos demonstrating not explaining, i do have a touch rom installed though

You have to make sure the rom you have installed even HAS the cube. Most cooks named their rom versions using the word TOUCH, but they may not necessarily include the cube... so look thru the rom info from the download post and see if its included in the rom u have.
First go into the cube settings, and set up the gesture you want to use to activate the cube
you have to set a shortcut to the aplauncher.exe which is located in the windows dir somewhere ... such as one of the soft keys or a link in programs.
When you run that shortcut, you'll notice ur flicker or something strange .. if I remember correctly, the X at the top right would dissappear. When that happens. you just slide your finger across the screen in the method you set up under the first step of what I wrote.
Most tutorials you see on youtube are an actual HTC TOUCH device ... which has an extra button that serves the sole purpose of running the applauncher.exe to bring up the cube. For all of us that don't have that actual device, we have to set the shortcut somewhere else in order to be able to activate it

Related

Enlarge your today screen (how to remove the bottom menu bars)

If you're looking to get rid of the menu bar at the bottom of the Today Screen, read on. This is not a new tip, but might save you time, as there's a lot of different versions of these programs flying around. Only the one below works on WM6 / HTC Touch.
I personally find that the Menu Bars at the bottom of the Today Screen really spoil the look of the HTC Touch's sleek black/grey theme. Besides, the Comm Manager and Contacts are both accessible via the spinning cube (or the camera button if you install Double Launcher) so there's no need to have on the Today Screen, you may as well get more space for plugins, or just to keep everything looking neat and tidy. See screenshot below!
Here's how to banish them forever (?!) :
1. Download ToggleTodayIIAlpha from this link:
http://www.vijay555.com/vj/releases/vjtoggletodayii/vjtoggletodayiialpha.exe
2. Copy it to your \Windows\Startup directory. (or somewhere else and paste a shortcut instead)
3. Go into the registry and edit this key:
HKLM/Software/Vijay555/VJTodayToggle
Change these keys:
Softkeysize = 1
StartSize = 26
TrayVisible = 1
That's it! I've had no massive problems with this so far, although I haven't been testing it for too long. I'd be interested to hear how people get on in terms of stability/bugs. You WILL get problems if you try to use any of the older VJTodayToggle programs in the thread on this forum:
http://forum.xda-developers.com/showthread.php?t=243211
(SIP keyboard staying on, SIP moving to the top of the screen, menu titles disappearing but not the background, etc.)
...in fact, that's precisely why I'm sharing this info with you, as this thread is 39 pages long and it's only towards the end that things become totally clear! I'll post again if there's any unexpected side-effects, I'm currently minimising BatteryStatus and I don't know whether this will
Good luck!
Carlos
NOTES / ADVANCED
=======================
A: If you want to make your screen even neater AND still overclock your Touch, then, in step 3 above, you can make TrayVisible=0 then you can minimise the BatteryStatus plugin and it won't show up on your today screen. (right click on batterystatus icon, choose 'show rows -> minimise') I haven't tested this properly yet.
B: If you want to explore hiding the Start Menu, feel free, it looks superb when you first do it, but then I have found that the HTC biotouch (spinning cube) automatically re-instates the start menu bar when it's deactivated each time.
C: Please note, this program ( tt2.exe) DOES NOT TOGGLE, even though it's called that! Again, it's a 39 page thread, I warned you...
D: You can also run TT2.exe with a -config option to avoid editing the registry, but this would actually make the above even more long-winded to explain to any n00bs.
E: A nice new HTC wallpaper is doing the rounds without the logo. (As you can see from my screenshot, it's mis-positioned with the extra screen space) See http://forum.xda-developers.com/showthread.php?t=319830
F: Vijay555 has been meaning to release a new (non-alpha) version of the software for some time, but sounds pretty busy. He seems like an all-round splendid guy though and I'd like to thank him for this software and his continued postings/programming.
I have the HTC X7500 WM6 and I've been desperate to make it works.
I've been trying other version from the 40 pages thread, so I'll try this one and I will post result.
BigDede said:
I have the HTC X7500 WM6 and I've been desperate to make it works.
I've been trying other version from the 40 pages thread, so I'll try this one and I will post result.
Click to expand...
Click to collapse
Good luck! The honest truth is that after I'd posted this, I discovered a couple of bugs that appeared in soak testing. I gave up in the end - it worked 90% but I would still occasionally get conflict, e.g. the SIP keyboard would appear at the top of the screen sometimes and only a soft reset would put it back where it was meant to be!
carlosp_uk said:
Good luck! The honest truth is that after I'd posted this, I discovered a couple of bugs that appeared in soak testing. I gave up in the end - it worked 90% but I would still occasionally get conflict, e.g. the SIP keyboard would appear at the top of the screen sometimes and only a soft reset would put it back where it was meant to be!
Click to expand...
Click to collapse
Yep I confirm that, SIP keyboard is there, and sometimes as well softkeys stay there after softreset.
Well actually for me it's even worse, it's hiding the system tray (the bar just above the softkeys bar) where we can add shortcuts icons and keep the softkeys bar enabled..
Im disappointed but thks for vijay555 for all the efforts
Perfect... without HTC Logo is even better...
Thanks Carlos,
I've just installed and its working fine. With the clean background from http://forum.xda-developers.com/showthread.php?t=319830 looks even better.
Cheers,
Marcelo
BigDede said:
Yep I confirm that, SIP keyboard is there, and sometimes as well softkeys stay there after softreset.
Well actually for me it's even worse, it's hiding the system tray
Click to expand...
Click to collapse
See my original post, have you tried setting TrayVisible=1 in the registry, this should show the system tray.
I followed exactly what u posted, it displayed it correctly the first time, then after soft reset it was displaying only the softkeys bar and hiding the system tray bar
Thks anyway
How does this look on screens BESIDES the today screen? I have used other programs on different WM phones in the past and although the bottom bar disappears on the today screen, it is still on other screens.
Also, can you use the bottom of the screen or is it just dead space? Some of us have moved the HTC Home Plug to the bottom of the page and if it is just dead space, it is going to look bad....
maevro said:
How does this look on screens BESIDES the today screen? I have used other programs on different WM phones in the past and although the bottom bar disappears on the today screen, it is still on other screens. Also, can you use the bottom of the screen or is it just dead space? Some of us have moved the HTC Home Plug to the bottom of the page and if it is just dead space, it is going to look bad....
Click to expand...
Click to collapse
The menu bar is visible on other screens, this behaviour is by design. I cannot see why anybody would want it invisible on other screens, as you normally need those softkeys for menus in most programs!
As far as I know you can use the bottom of the screen, it is not dead space. But why not try it out - it's unlikely to do any harm. You can always delete it from your startup directory to uninstall if you don't want it.
C
Well it works well so far.....(Not my screen, Neo's screen @ HoFo)
I can't remember if the TrayVisible setting even works - I think it was something I was intending to build in, but never got around to it.
Apologies... I'm kinda programming again, had lots going on, so never finished the app. Sorry for you guys having to use my unfinished piece of cr*p. I'll make it work properly one day!
V
vijay555 said:
I can't remember if the TrayVisible setting even works - I think it was something I was intending to build in, but never got around to it.
Apologies... I'm kinda programming again, had lots going on, so never finished the app. Sorry for you guys having to use my unfinished piece of cr*p. I'll make it work properly one day!
Click to expand...
Click to collapse
Thks a lot vijay555
HELP!!!
I installed this, but I don't know how to get into the registry from an .exe file, so I just tried to open the file through my phone, and instead it has hidden my start bar, as well as the bottom bar. How do I reverse this???
maevro said:
Well it works well so far.....(Not my screen, Neo's screen @ HoFo)
Click to expand...
Click to collapse
How did you "move" the HTC Home plugin to the bottom part of the Today-screen without any plugin above it? I searched all over the forums, but I cannot find the answer to this question
--Marc
soulstar said:
HELP!!!
I installed this, but I don't know how to get into the registry from an .exe file, so I just tried to open the file through my phone, and instead it has hidden my start bar, as well as the bottom bar. How do I reverse this???
Click to expand...
Click to collapse
Just soft reset your phone.
marc2503 said:
How did you "move" the HTC Home plugin to the bottom part of the Today-screen without any plugin above it? I searched all over the forums, but I cannot find the answer to this question
Click to expand...
Click to collapse
Use the HTC Home customizer to "unlock" it. Then you can move it around like normal.
However, it doesn't redraw correctly on the right side if you unlock it, and a scrollbar comes and goes.
i have a other solution!! PCM shrink installe it and your bar remove it s very easier! For become to the original config juste delete the programmz!!
won't stick
Hi..very nice and easy Zip File..just one problem: the toggle won't stick after a soft reset = one has to go into File Explorer..double click the Toggle File and only than the screen is "clean" again.
Any way to make the toggle "stick"?
I have not this problem! I install the cab i going on the explorer and today shrink and clik on after i reboot my pda ans the bar not appear ... You can try put a abbreviated of today skrink in WINdows/started for star the application automatic on windows sartup
the result of the appl:
I have this running at startup on my Tilt, works with screen rotations and everything! And the hard keys are still mapped to calendar and contacts for quick access, awesome.
Many thanks, couldn't stand those useless soft keys before.
- Charles

TouchFlo implementation on Mogul

Given that I believe the hardware as far as the touchscreen itself goes, are there any plans to try and migrate the TouchFlo / TouchFlo II ROM or application layer over so it'll work with the Mogul?
I love the Touch Flo's inteface, but there's no way I would ever give up my full keyboard.
You can find the touchflo application at this post
http://forum.xda-developers.com/showthread.php?t=334965&highlight=pcm+keyboard
Make sure to download a4, this is the most recent release. Also, read the entire first post before installation. I have the HTC 6800 (mogul) from sprint and I successfully installed this software this morning.
I have also installed A4 on my mogul. It is running great! I modified the config file a tiny to give a longer delay and to add SSContact.
Where is my cube?!!!
I can get the touch scrolling to work but still cannot figure out the cube. I can access the audio manager and the home screen (with tabs) but do not see any of the other full screen touch menus or animations.
I have installed the following files:
FTouchFlo_a4.CAB
HomePlugin WM6.cab
HTC_Audio_Manager.cab
HTC_Audio_Manager_Today_Plugin.cab
JT ButtonFlo.cab
Touch Flo (Alpha).cab
Touch Settings v1.22.CAB
I changed the registry key so that audio manager is the music player and also deleted the bio.lnk and mediahub.lnk from the windows/startup. I even went as far as to copy .brn files to make sure they were there. Even Touch settings is working fine.. BUT any time I slide LR or click the button I get the stupid black screen. (WTF, it is killing me!)
Has anyone figured this out on Sprint Mogul???
I didn't try too hard on the cube because I couldn't get the gestures to work. Maybe this is something that will be improved in later versions.
jpshook said:
I can get the touch scrolling to work but still cannot figure out the cube. I can access the audio manager and the home screen (with tabs) but do not see any of the other full screen touch menus or animations.
I have installed the following files:
FTouchFlo_a4.CAB
HomePlugin WM6.cab
HTC_Audio_Manager.cab
HTC_Audio_Manager_Today_Plugin.cab
JT ButtonFlo.cab
Touch Flo (Alpha).cab
Touch Settings v1.22.CAB
I changed the registry key so that audio manager is the music player and also deleted the bio.lnk and mediahub.lnk from the windows/startup. I even went as far as to copy .brn files to make sure they were there. Even Touch settings is working fine.. BUT any time I slide LR or click the button I get the stupid black screen. (WTF, it is killing me!)
Has anyone figured this out on Sprint Mogul???
Click to expand...
Click to collapse
Well this Flash version of the Touchflo 3D Cube it seems to work really well so far on my mogul, like I said it's not the real cube but it's really neat just the same.
http://forum.xda-developers.com/showthread.php?t=328010&highlight=ByKa+Cube+Launcher
Yeah, Byka's Flash version is cool, but it uses lots of system resources and just isn't quite the same.
Someone having the black screen issue has to have found a fix by now?
I've tried the BYKA cube but it jsut looks tacky. It works great but I guess I just have a problem with the icons and the background. Slither is working on a cub which looks exaclty like the TOUCHCUBe but it still has a way, although he's working very diligently. I would love to see the original cube, hopefully some cab extracted in combination with the touchfloa4. That would be ideal.
I tried it yesterday and was not impressed. So I installed SPB Pocketplus V.4 which also has "touch" features and works much better to be honest...
this is from my post in: http://forum.xda-developers.com/showthread.php?t=333513
BEGIN
I got this working on my mogul (close to barebones w/o ext_rom) seemingly perfectly... I did it on a fresh hard hard reset because of some conflicting software and my remove programs list being blank (this is not related to anything with touchflo btw... so don't worry)... I mapped touchflo.exe (on Ftouchflo) to left-right(to make cube both initialize and rotate with my finger dragging left right) and it works like a charm! I also mapped up-down to efrost's minimize program(efrostminimize.exe) that I got from Slither's cube, this brings me back to the Today screen. Not sure what the "ns.exe" is for in your config files but it seems to be working fine for me so far following the instructions. I'm thinking with the mogul black screens there must be a conflicting software involved.
I only have:
HTC plugins + Audio/Comm Manager
Total Commander
TCPMP+FlashVideo
PHM_Reg
Memmaid
Palm Msging
Oxios
Slide 2 Unlock 2 0.53
Ftouchflo alpha 4
Adobe Flashlite 2.1
Edit: Be careful how fast you retry using finger swipes upon the initial initialization (from closed) as it will run two instances if the touchflo did not fully initialize yet. (they both load though... phew* still no black screen)
Edit 2: Remember, if you map left-right and use Slide 2 Unlock 2(S2U2), to exclude s2u2.exe in the Ftouchflo config.
will post if black screen comes up in the future
I w as going to try this after midterms, how is it working? Is it pretty awesome? Is it worth it? does it bogg down your system? Are you afraid of installing other apps for fear of it "blacking out"? I'm very interested in the cube but it seems out of reach right now because of the bugs.
wandrerx said:
this is from my post in: http://forum.xda-developers.com/showthread.php?t=333513
BEGIN
I got this working on my mogul (close to barebones w/o ext_rom) seemingly perfectly... I did it on a fresh hard hard reset because of some conflicting software and my remove programs list being blank (this is not related to anything with touchflo btw... so don't worry)... I mapped touchflo.exe (on Ftouchflo) to left-right(to make cube both initialize and rotate with my finger dragging left right) and it works like a charm! I also mapped up-down to efrost's minimize program(efrostminimize.exe) that I got from Slither's cube, this brings me back to the Today screen. Not sure what the "ns.exe" is for in your config files but it seems to be working fine for me so far following the instructions. I'm thinking with the mogul black screens there must be a conflicting software involved.
I only have:
HTC plugins + Audio/Comm Manager
Total Commander
TCPMP+FlashVideo
PHM_Reg
Memmaid
Palm Msging
Oxios
Slide 2 Unlock 2 0.53
Ftouchflo alpha 4
Adobe Flashlite 2.1
Edit: Be careful how fast you retry using finger swipes upon the initial initialization (from closed) as it will run two instances if the touchflo did not fully initialize yet. (they both load though... phew* still no black screen)
Edit 2: Remember, if you map left-right and use Slide 2 Unlock 2(S2U2), to exclude s2u2.exe in the Ftouchflo config.
will post if black screen comes up in the future
Click to expand...
Click to collapse
it works fine... no real big load on system resources (it was designed for a slower processor actually). No, I'm not really afraid of installing other programs. I was just stating that it's obvious that all those people complaining about black screens have something that conflicts with the cube somehow (or they didn't install according to instructions). Most likely something that runs in the background...
wandrerx, how do you actually get the cube? What application does it get installed with?
Can you send links to the exact apps you are running that are minimum requirements for this to work?
The original detailed instructions (by mikewtw) and files are in: http://forum.xda-developers.com/showthread.php?t=333513
This is really just a summary of instructions and issues since it's getting messy there...
You need all the files from the original instructions:
TouchFlo.zip
AL_xx_Touch.zip
Touch Settings v1.22.CAB
Installation:
Prereq (To be installed first...):
HTC Home Plugin - I used the one from here... http://forum.xda-developers.com/showthread.php?t=319308
HTC Audio Mgr - I got it from the touchflo.zip
HTC Audio Plugin - I got it from the touchflo.zip
Installation Process
1)Install "Touch Flo (Alpha).cab"
2)Install "JT Buttonflo.cab" (This is needed because it causes a script to run at startup which makes it actually work)
3)Install "Touch Settings v1.22.cab"
4)Delete "Mediahubmini.lnk" from "\windows\startup"
5)Unzip all of the files from "AL_xx_Touch.zip" to "\touch" (this step may not be needed but it was mentioned in the original post and I did it anyways)
6)Copy those "AL_xx_Touch.zip" files into "\windows"
7)Now might be a good time for a soft reset
8)Run "Touch Settings" from programs once but do not touch anything just yet... click on save option at the bottom" (this step apparently saves the icons you just installed so they'll appear... I think)
9)Soft reset
Touchflo is now installed you can either:
A) Map it to a button thus making it buttonflo
B) Install Ftouchflo Alpha 4 and use the touch screen to launch and rotate left to right (one way only currently)
If you decide to use Ftouchflo Alpha 4 I've enclosed:
"FTouchfloConfig.txt" - To be copied into "\Program Files\Ftouchflo_a4"...this also makes it compatible with s2u2
"efrostminimize.exe" (by efrost duh!) - To be copied into "\windows"
FTouchflo usage:
Using my config you can bring up the cube by swiping down-to-up (like the real one) or you can do the same going left to right. You can also minimize the cube by swiping up-to-down(via efrostminimize.exe)
Notes:
1)Upon initial run from either being closed or soft reset, try not to swipe it activated too much otherwise it will open twice. Once started swipe all you want. Of course you could just activate touchflo another way first.
2)Installing Touchflo alpha takes away HTC Home contacts
3)This does not seem to be a killable app via "memory"
4)I'm trying to figure out whether I can make some script to make it run smoother
5)Audio Mngr seems to be the only resource killer as it also loads into the cube
5)Yes it only goes one direction, this was a modified touchflo designed to work with buttons. As I said, this is the one we have to use till a cooked rom with the cube comes out.
6)This does not run on initial boot, you've got to either run it from Ftouchflo or "touch flo" in programs
7)If you run "Touch flo" without button mapped or "Ftouchflo"(configured for it) it will stay on the first screen
8)Can also be minimized by using the "red hangup button" (buttonflo-method as opposed to using my config for Ftouchflo)
9)Using HTC Home Plugin Customizer requires a soft-reset because it disables the Home Plugin temporarily
7)Icons not installed correctly is one very big cause of black screen
8)Conflicting programs may also be a reason for black screen as I did this all on a hard reset
Ftouchflo Alpha4
http://forum.xda-developers.com/showthread.php?t=334965
Followed these steps exactly. 3 attempts, 3 blackscreens. 0 fun. Guess we'll just have to wait for a rom...
jbmoneys said:
Followed these steps exactly. 3 attempts, 3 blackscreens. 0 fun. Guess we'll just have to wait for a rom...
Click to expand...
Click to collapse
thats pretty humorous.
Please Help Me Understand!!
Ive installed the touchflo a4, that's the most recent one. but what is touch flo alpha, does it go with the touch flo app I installed? what is the cube, was I suppose to install all three together? right now the app works fine but when im scrolling on the net it accelerates out of control. how do I slow it down? Please respond..
Ncruze said:
Ive installed the touchflo a4, that's the most recent one. but what is touch flo alpha, does it go with the touch flo app I installed? what is the cube, was I suppose to install all three together? right now the app works fine but when im scrolling on the net it accelerates out of control. how do I slow it down? Please respond..
Click to expand...
Click to collapse
dont get the a4 get touchflow v1.3 from the link below.
http://forum.xda-developers.com/showthread.php?t=338143
if you want a cube, I highly recommend slithers cube.
http://forum.xda-developers.com/showthread.php?t=336234
I have been using both of these programs and they work together flawlessly on the Mogul
HTC HOME vs. the Cube
For anyone who has tried both.
I am currently running the HTC Home on mine and it works very well. Power consumption is normal. Good quick response. No complaints overall.
However, I am somewhat intrigued by the Cube and have been contemplating trying it out.
How is the CPU/Power consumption. Responsiveness. Stability? Thanks for your thoughts in advance.
Michael
Stability
I have tried both the Home plugin and the cube. If youuse the home plugin, do a search for the six tab "fixed" kaiser plugin. Fixes some memory leaks and has more functionality. The Cube here is very unstable and not too quick. I had to hard reset to get it to work, and it will not work with some other apps installed. For me, it would not work with SPB Pocket Plus. I would recommend getting the cube Slither has in development. It runs on flash, is quick, and does not seem to have compatibility issues.

Sprint Touch Cube Configuration Tool 4.1

Ok, I think this one is gonna need a sticky. I got sick of having to type in all of the shortcuts in the registry editor to change the cube, so I wrote this little spiffy app. It allows you to customize the 2 sides of the cube with shortcuts. Just make sure you know what you are doing as far as what can go where. Enjoy!
Version 1.1 - I got tired of waiting for the file browser to refresh everytime. Now you only have to wait for the first time, after that it is cached.
Version 1.2 - Added IconPress to the 6-App Side, and IconPlaying, IconPlayingPress, and IconPress to the 3-App side.
Version 2.0 - Added param for 6-App Side and 3-App Side. Added links to animation files. Added GUI for app selection for 3-App side and 6-App side.
Version 2.1 - Squashed the bugs that were coming up. Sorry I didn't test it enough before releasing.
Version 3.0 - Now supports multiple 6-App sides (See Polen's Vista Cube)!! Added reset to defaults. Automatic shortcut selector or browse for apps. Fixed the bug where the Program Files directory wasn't showing up in the Browse tree.
Version 4.0 - Added support for the iCube , animation configuring for newly added sides, export settings to .reg file, and icon image preview*.
*The icon image preview must be set up correctly to work. It all depends on the naming convention used. Polen's icon packs work with the preview. Since the .brn files cannot be rendered, a .bmp file must be placed in the directory with the .brn having the same filename or following Polen's naming convention (ex. ie.bmp -> ie_top.brn, ie_top_press.brn).
I tried testing it with the stock cube, Polen's 6 sided cube, and the iCube, but may not have caught everything, so if you find a bug, let me know!
SORRY!!! I left out a file from the .cab, it's all fixed now! Enjoy!
Version 4.1 - Fixed a bug in the export settings and the Save button was getting disabled.
Download link: http://rapidshare.com/files/79573356/CubeConfig4.1.zip
If you guys have anymore suggestions, let me know.
Cheers!
thisguyinoc said:
Ok, I think this one is gonna need a sticky. I got sick of having to type in all of the shortcuts in the registry editor to change the cube, so I wrote this little spiffy app. It allows you to customize the 2 sides of the cube with shortcuts. Just make sure you know what you are doing as far as what can go where. Cheers!
http://rapidshare.com/files/73227261/CubeConfig.zip
Click to expand...
Click to collapse
Thanks for the App, works great.
difference between this and touch settings???
ok one question
when i make Icons. I save them as a BMP 24 bit, then i can just BMP to BRN and it will work?
also you just install CAB and go. Do you have to stop any processes before going. I guess i wont wait for Touch settings. This looks like it will work great???
just need to know if i need different icon sizes for the 3X2 and Media Hub????
thisguyinoc said:
Ok, I think this one is gonna need a sticky. I got sick of having to type in all of the shortcuts in the registry editor to change the cube, so I wrote this little spiffy app. It allows you to customize the 2 sides of the cube with shortcuts. Just make sure you know what you are doing as far as what can go where. Enjoy!
Click to expand...
Click to collapse
Without wanting to detract from what you have done, you may also want to look at 'Touch Settings' which has this functionality already. (now works on the Vogue) See:
http://forum.xda-developers.com/showthread.php?t=324556 (main thread)
http://forum.xda-developers.com/showthread.php?t=347892 (vogue support thread)
in your post though it said that you cant do Iocns yet on the sprint touch this one i believe if you just set the filepath you can!
also carlos kind of in response to my other thread in the vogue forum.
I was at my friends house playing w/ his sprint touch, downloaded some icons from my website, and put them on w/ this prog. I just saved files to the windows folder with BRN extension and it worked? Idk if it will w/ touch settings, but this one works for that purpose....
still not sure though if you need different size icons for mediahub..???
also still my question..... do you have to stop running the mediahub.exe or w/e the file is called before installilng this puppy?
ambush276 said:
in your post though it said that you cant do Icons yet on the sprint touch this one i believe if you just set the filepath you can!
Click to expand...
Click to collapse
As of yesterday's build Touch Settings can display / change Sprint (BRN) Icons. Simply tap the pictures to change.
great! ive heard so many great things about the touch settings program.. That i want to continue using it.
My question is are the pics still fuzzy when you use BMP to BRN. OR are they clear like sprint pre installed logo's.
my final question, and i know its been asked, can i use the 119 by the other dimension for both the 3X2 and Media Hub Screen?? What dimensions do i need? on the pics?
also i heard about Media hub not closing? is this true or is it fixed?
Would this work for the Bell Mobility version of the HTC Touch? (Canadian carrier, with a version of the Sprint vogue)
what i dont understand is th animation tab. I know how to make my own icons and stuff, my question is... like what is the animations brn?? What do i have to make for those. Do i need to change it?? I have all custom icons, does animations matter?
ambush276 said:
what i dont understand is th animation tab. I know how to make my own icons and stuff, my question is... like what is the animations brn?? What do i have to make for those. Do i need to change it?? I have all custom icons, does animations matter?
Click to expand...
Click to collapse
those are the images that are shown when changing from side to side. You don't have to change them, but you now have the option.
i c. So like if i make icon images... when i go to animations tab, i just say for image 1, run the path to my icon. Then i will be fine?? and it will turn w/ icon of choice... But there are only 6 icons???
thisguyinoc said:
If you guys have anymore suggestions, let me know.
Click to expand...
Click to collapse
What I'd really like to see is the ability to add QDail sides to the cube like you can with the Aplauncher. Has anyone got that working? I have more than 9 frequently called contacts and would love to have at least 2 sides of contacts - one for personal and one for business would be perfect.
But now that I've typed all this...I just realized that you didn't write the 6-sided cube app, right? I just integrates with yours....
I've been using the Touch Settings program from Carlos -- I'm anxious to see how this one works, too. Thanks to both of you for your hard work!
Haggar said:
What I'd really like to see is the ability to add QDail sides to the cube like you can with the Aplauncher. Has anyone got that working? I have more than 9 frequently called contacts and would love to have at least 2 sides of contacts - one for personal and one for business would be perfect.
But now that I've typed all this...I just realized that you didn't write the 6-sided cube app, right? I just integrates with yours....
I've been using the Touch Settings program from Carlos -- I'm anxious to see how this one works, too. Thanks to both of you for your hard work!
Click to expand...
Click to collapse
Yeah, I didn't write the 6-sided cube. I worked with Polen to make my app scale to the number of sides you have installed.
thisguyinoc said:
Yeah, I didn't write the 6-sided cube. I worked with Polen to make my app scale to the number of sides you have installed.
Click to expand...
Click to collapse
I played with your program yesterday (okay, let me be honest...I spent 20 hours in the past 24 hours making new cube graphics and drinking coffee until it was bleeding out my ears) and it's wonderful. In combination with the 6 sided cube it's a really great ap.
This may be from a total lack of sleep and the really nice caffiene buzz I've got going, but I'm a bit confused regarding the rotation anims and how to set them via the anim tab.
Is there a way to specify different transition graphics sets between sides 1&2, 2&3, and 3&4? It seems like the default is set to use C0-C5 for all rotations of the Launcher. Am I missing something? I was that the VistaCube program installed D0-D5 so manually created my own and added them to the Windows directory. My D series seems to be applied to those transitions eventhough the animations page shows C0-C5.
Is there a way to get to a drop down menu specifically for the extra sides or is this something that must be done manually? And in either case...how would I set it up to have separate anims for each of the different sides?
The main reason I ask is because I'm planning to use rather generic icons on my launcher pages so that I can swap out programs whenever I want without having to update the graphics on the cube. For example...I have an MP3 player icon that says "Music" on one page. I can assign that to Mort, or WMP, or anything else I want and not worry about the icon. That allows me to put the icons into the rotation graphics so it's a smooth transition and I don't see the "flash" when the app icons load on top of an otherwise different background.
Whew...long-ass question for something so simple. Any help would be appreciated!
Haggar said:
I played with your program yesterday (okay, let me be honest...I spent 20 hours in the past 24 hours making new cube graphics and drinking coffee until it was bleeding out my ears) and it's wonderful. In combination with the 6 sided cube it's a really great ap.
This may be from a total lack of sleep and the really nice caffiene buzz I've got going, but I'm a bit confused regarding the rotation anims and how to set them via the anim tab.
Is there a way to specify different transition graphics sets between sides 1&2, 2&3, and 3&4? It seems like the default is set to use C0-C5 for all rotations of the Launcher. Am I missing something? I was that the VistaCube program installed D0-D5 so manually created my own and added them to the Windows directory. My D series seems to be applied to those transitions eventhough the animations page shows C0-C5.
Is there a way to get to a drop down menu specifically for the extra sides or is this something that must be done manually? And in either case...how would I set it up to have separate anims for each of the different sides?
The main reason I ask is because I'm planning to use rather generic icons on my launcher pages so that I can swap out programs whenever I want without having to update the graphics on the cube. For example...I have an MP3 player icon that says "Music" on one page. I can assign that to Mort, or WMP, or anything else I want and not worry about the icon. That allows me to put the icons into the rotation graphics so it's a smooth transition and I don't see the "flash" when the app icons load on top of an otherwise different background.
Whew...long-ass question for something so simple. Any help would be appreciated!
Click to expand...
Click to collapse
That's a very logical request. Look for it in the next release.
thisguyinoc said:
That's a very logical request. Look for it in the next release.
Click to expand...
Click to collapse
Pithy. I like it.
Haggar said:
What I'd really like to see is the ability to add QDail sides to the cube like you can with the Aplauncher. Has anyone got that working? I have more than 9 frequently called contacts and would love to have at least 2 sides of contacts - one for personal and one for business would be perfect.
But now that I've typed all this...I just realized that you didn't write the 6-sided cube app, right? I just integrates with yours....
I've been using the Touch Settings program from Carlos -- I'm anxious to see how this one works, too. Thanks to both of you for your hard work!
Click to expand...
Click to collapse
Did you ever figure out a way to add another contact side to the cube?
I just installed the CubeConfig3.0.CAB
In the usual screen that says successfully installed and if you need more room... It is followed by a message I have not seen yet:
The program you have installed may not display properly because it was designed for a previous version of Windows Mobile software.
FYI
EDIT: I'm running the unmodified WM6 on a Bell CDMA Touch (Vogue - 128MB RAM/256 MB ROM)
Hmm I never got that one.... I'm running the exact same phone as you, MM.

Minimize programs with touchflo

I know that this has been discussed here: http://forum.ppcgeeks.com/showthread.php?t=13771&highlight=minimize
but the instructions on how to specifically use an up -->down motion (in order to minimize a currently open program) are either beyond me, not clear enough, or not there at all. Has anyone been able to get this function to work, and if so can you post instructions. Also, as mentioned in the above thread can we get a side-to-side motion the switch between open programs?
I read the thread. Like you said, instructions were missing
I have a modded cube and lots of hacks on my Touch.
So, one option that works for me at the moment - is a two step process.
1) press red button to return to Home screen.
2) press task list drop down in top right corner and choose running program to switch to.
It's fast, easy, working and doesn't require any potential confilcts with TouchFlo.
Aairman23 said:
I know that this has been discussed here: http://forum.ppcgeeks.com/showthread.php?t=13771&highlight=minimize
but the instructions on how to specifically use an up -->down motion (in order to minimize a currently open program) are either beyond me, not clear enough, or not there at all. Has anyone been able to get this function to work, and if so can you post instructions. Also, as mentioned in the above thread can we get a side-to-side motion the switch between open programs?
Click to expand...
Click to collapse
I think the minimize.exe app they refer to is used in conjunction with the ftouchflo application - not the standard touchflo. You can find it here: http://forum.xda-developers.com/showthread.php?t=338143

Need the following apps

I need the following HTC Wizard apps:
-An app which locks the touch screen and keypad and can be unlocked by pressing a combination of buttons (Like left softkey + right softkey) like in symbian and java phones.
-A good java emulator
-A notes app like WM5 built-in notes app which supports recognition of what you draw.
Please post here if you have.
PS: I'm a newbie here so I apologize if these apps are already uploaded.
#1: you can configure the standard lock to unlock with a simple numeric PIN or a more complex passphrase. You can configure it to lock with a timeout ... I use one hour: when I haven't used the phone for an hour it automatically locks. You can also get S2U2 or other locking programs.
#2: Java ... look for "Esmertec Jbed".
#3: bring up the notes app, then click on the soft keyboard. click on the little up-arrow beside the keyboard icon on the bottom of the screen, and you might find other keyboard options including recognition. Some cooks left it out of their ROMs to save space, but it's a standard thing.
Lots of free apps are available. One excellent source is OMarket. Also search the xda-developer forums, especially the development forums, for old threads where people may have attached cab files or zips of cab files.
#1: I got the lock application but still thanks for telling
#2: Thanks!
#3: I don't mean that. I mean when you draw something on the screen and then go to Tools > Recognize, it recognizes the letters you have drawn and shows them as text. That feature is not in my TNT Rom. I think it's only for WM5. Do you have such a plugin to enable that?
Thanks!
Ah, I know what you mean. I don't clearly remember but I think someone posted a cab for that in one of the ROM development threads.
Sent from my Android on HTC Kaiser using XDA App

Categories

Resources