With Sprint, I had internet sharing working fine over Bluetooth on the latest WM6 rom. I upgraded wto WM 6.1 and am unable to use Bluetooth DUN - (I get error 67 when the phone dials a connection). I can connect using USB and PDANet doesn't work for Bluetooth. Did sprint change something with WM6.1?
Thanks
Related
I am been reading all the related Theads I could.
When I activate Internet Sharing and connect via USB my PC searches for an IP over then finally fails with and tells me "Limited or No connectivity"
I'm running AS 4.5, XMXL v0.20, XP x64.
I tried With AS on, with AS disconnected, Disabling USB.
Everything has the same results...
Did I miss something???
Thanks,
-J
disabling HSDPA did the trick for me...
when enabled got the same error..
first time i tried on laptop with it disabled it went through
I used HTweak to disable it..
Same thing.. It tries to aquire a network address then times out..
Disable bluetooth then it will work. The BT stack on WM6 seems to not let the DHCP service work on USB when its enabled.
edit: not sure if this is deliberate or not. I'm a bit bummed by it b/c before when using the AKU3.3 Cingi ROM (which didn't have this ideosyncracy) I could talk on the phone using my BT headset while surfing over USB tether.
Son of a ........
That did it..
I would have never guessed BT was the issue..
In fact I would have kept on screwing with it..
I even copied the old Wireless Modem app.. was going to try and get that working..
Any way to use the BT stack from the AKU 3.3 rom?
What about the Widcomm Stack?
What is the issue with BT and Internet Sharing with this rom?
hmm this is veryvvery wierd..
I have bluethooth enabled and connect just fine, but if i enable HSDPA i just time out not getting network address.
Btw using XDA live 0.2.1
I dont know if this may help, but it worked for me.
On your phone connection settings if you assign the dns servers rather than using the server-assigned ones, the computer seems to make a connection without timing-out.
The dns settings i'm currently using are:
4.2.2.1 and 4.2.2.2
PS
Im on t-mobile uk and the HSDPA connection seems more stable with these settings.
Anyone try the Widcomm Stack on WM XDA Live v0.2?
Does anyone know of a WM5 or WM6 device that supports the Bluetooth PANU (User/Client) profile? I need a WM phone that can connect to a PAN NAP device.
I currently have an HTC Apache (PPC-6700) with Kirvin's AKU 3.5 ROM and RoniXT's PAN profile. Unfortunately the PAN profile does not support PANU. I have access to other phones and am willing to try cooked up ROMs.
Thanks - Mark.
I would also be very interested in getting PANU support in WM6.
Or even the other way, allowing WM6 to act as a NAP (internet connection sharing) but without having to activate a GPRS connection on the phone.
Hi all,
I've seen a lot of threads specifying how one would go about using the bluetooth to share the phone's internet connection. However, I would like to do the opposite, that is, share the PC's internet connection via bluetooth so that I can surf the net on my phone (I do not have wifi). Any help would be most appreciated.
http://forum.xda-developers.com/showthread.php?t=274581&highlight=bluetooth+modem
http://forum.xda-developers.com/showthread.php?t=313886&highlight=bluetooth+modem
many more hits of you use search and search "bluetooth AND modem"
thanks for the reply, but i already know how to do this. Perhaps you didn't understand my question; I do not want to use my XDA as a bluetooth modem. I would like to use my home ADSL connection via bluetooth to access the internet through my phone. This feature was there by default in my SE P910i, and I'm sure it should be possible to do this via my XDA as well. Once again, I do NOT want to use my XDA as a bluetooth modem
when connected to activesync pda's have the same network access as the pc they are connected to unless one have disabled it
so synch with bluetooth to your pc and you got it's internet
Check this page. Hope it helps you
http://www.geekzone.co.nz/content.asp?ContentId=449
I'm successfully running such a setup, using Linux (w/ bluez stack) on the Internet Gateway. However, I had only luck with the Widcomm stack on the Windows Mobile, w/ the MS stack, I could not manage to find any way to use DUN or NAP. With Widcomm, you can configure access via a "Bluetooth Access Point", which will use DUN services on the Host (Gateway) computer. On Linux, this means setting up dund (comes with bluez) and configuring a PPP profile for it.
Any idea if Widcomm BT stack is available for installing it on WM5. I think mine is with MS by default and couldnt find an option to configure it.
I think it isn't offered for free to the public. Nevertheless, there seem to be a few CABs with the broadcom/widcomm stack out there in the WWW. Google might lead you the way...
Thanks a lot for the feedback guys.
I have succesully used DUN with both my original iMate Jamin ROM and PDAViet 4.0.0.0.6 ROM to access the internet via a linux box running Bluez and dund.
I was hoping the new PAN profile in wm6 would allow me to simplify and setup a standard wm6 PANU -> linux NAP. However it looks like wm6 only supports running as a NAP and wont allow you to do that unless your connected to the internet via GRPS etc.
Is it possible to either add support for PANU in wm6 or activate the NAP without an active connection?
I'm not sure if I'm the only daft bat that does this. But in the past i would use my Hermes under wm6 as a Bluetooth Pan Internet sharing connection with my BA as it had the ability to either Host or establish a Bluetooht PAN link.
Since i've upgraded the BA to Wm6 I've noticed that as with my hermes the betowrk options are severly depreciated. and now when i search for Bluetooth services on the hermes it only shows Dial up networking but doesn't give you the option of Bluetooth PAN as a service it can find or give. also Can not set the init string to send to Bluetooth modem if choosen. thusly cannot tell it the access point etc.etc.
Is there any advise possible to help me link the BA with my hermes using Bluetooth PAN for the internet sharing through the hermes ( yea i know but HSDPA is far faster then the BA's basic 3g hehehe)
RESOLVED: the problem is in the Bluetooth stack of this rom. in short the Wm6 rom appearantly can't find a PAN connection at all as I tried to find the one on my PC at home and it definatly didnt' show anything accept a serial port. However my hermes could see the personal network conenction and once reflashed to the t-mobile latest rom it can now establish a PAN network conenction with pc or hermes300.
guess the bluetooth profiles in the rom for the BA in wm6 are a bit lacking at moment
It works great in Vista
Hi,
My Vista has automatically recognized my Hermes. No need to define a modem or connection string. Just run the Internet Sharing on Hermes and then it is seen in Networks and Sharing Cetner. I just open my IE and it works.
edwardgonen said:
Hi,
My Vista has automatically recognized my Hermes. No need to define a modem or connection string. Just run the Internet Sharing on Hermes and then it is seen in Networks and Sharing Cetner. I just open my IE and it works.
Click to expand...
Click to collapse
cool, only problem here is that my Hermes 300 ( t-mobile vario II) using Schaps 3.54c Wm6 Rom has the bluetooth Pan driver for internet sharing, as well as the modem link yea? And the Blue angel now being Windows mobile 6 doesn't show like Wm2003 did. in Wm2003 you could create a Bluetooth Netowrk connection for PAN to the hermes. Or a bluetooth serial connection to the hermes Modem link. Now it only shows Dial up networking in both since they are both wm6. And also doesn't give you the option of an init string entry in the advance network options for the AT+CGD init string that also lists the part "ip", "general.t-mobile.uk" which is the access point when doing Bluetooth DUN.
How would i establish a PAN connection to the hermes Internet sharing with the BA under Wm6 from helmi is the real question?
Ok I can assume then nobody else has 2 windows mobile 6 devices and tries to have one work via the other or nobody other then me has tried this.
Hermes300 windows mobile 6
Blue angel Helmi Windows mobile 6
cannot make a Pan connection in either direction Hermes to Blue angel, or Blue angel to hermes.
this means potentially people with Pda's ( ie: Compaq or HP Ipaq's runnign Wm6 ) or other mobile with wm6 will not be able to use the Helmi rom for internet sharing and really are better off leaving WM2003se on as has more compatability in that regard.
If however others have tried this and found a way to get it working please post =)
Me too
cyberjak said:
Ok I can assume then nobody else has 2 windows mobile 6 devices and tries to have one work via the other or nobody other than me has tried this.
Click to expand...
Click to collapse
I have two WM5 devices and am having exactly the same problem! I always through DUN was simple enough, but I am not going to get in to a debate about it versus Internet Sharing BUT why the hell did MS remove the "client" functionality? It is all very well and good if your Internet Sharing device (i.e. WM5 or 6 phone) is going to be the "server" but what if it is the client (as many PDAs will be).
I see no way of doing it! Anyone?
HeMan321 said:
I have two WM5 devices and am having exactly the same problem! I always through DUN was simple enough, but I am not going to get in to a debate about it versus Internet Sharing BUT why the hell did MS remove the "client" functionality? It is all very well and good if your Internet Sharing device (i.e. WM5 or 6 phone) is going to be the "server" but what if it is the client (as many PDAs will be).
I see no way of doing it! Anyone?
Click to expand...
Click to collapse
you can still use the Modem link if you can get it to create a serial port bluetooth link , ie: pair the devices and select Serial Port. then under the connections then you would tell it to use Bluetooth Modem
and put in the advanced dialing string for bluetooth DUN.
there are a few threads about bluetooth DUN on this forum.
the only thing i can thnk of that would make this not work however is if the roms your using are cooked roms and the profiles in the bluetooth stack are missing on 1 or both for the features suggested.
this is what stopped me from having this work as the wm6 on the Hermes and on the Helmi rom are missing the profile for HOSTING a PAN directly without internet sharing and dont' offer bluetooth serial port as an option
Hello all
I am having a problem getting the HD2 to connect to a TomTom Go 530 so that the TT can use the GPRS connection from the HD2 to get real time traffic data.
The problem is that if I put my T-Mobile contract SIM into a HTC Touch Cruise running WM6.0, load the DUN drivers cab. file and pair up to the TT, everything works perfectly. (The T-Mobile settings in the TT are incorrect but it is a straightforward job to manually enter the correct settings and then it all works).
However, if I put the same T-Mobile SIM into the HD2 (which runs WM6.5), and again, load the DUN drivers cab. file and pair up to the TT, the TT cannot establish a GPRS connection to T-Mobile. All I get is the 'Unable to establish wireless connection' error message on the TT and you can also see the 'Dialup Networking' service connecting and disconnecting on the HD2 whilst the TT is trying to connect. The process always ends with the dialup networking service disconnected on the HD2. I should point out that the HD2 and TT do pair up successfully for hands-free operation but not for GPRS.
Please can anyone help here? Am I doing something daft? Is the DUN drivers cab. file compatible with WM6.5 or is there a new one? Is this a bug in WM6.5 itself? e.t.c.
Thanks to all in advance for any help.
Regards
Mutts