Default keyboard, sip change - Windows Mobile Development and Hacking General

I really didnt want to post this, but i used sipchange and tried several keyboards but after a reset it defaults back to keyboard
I am using asergs rom on my herald and it includes sipchange i changed to touchpal and the touch dual neither stays after reset

Try setting a longer Initial delay in sipchange, 30 sec or more. Make sure u press the 'Select' button after setting the new KB, wait a while before existing the program.

i cant wait a while, as soon as i select it the program closes

Haha.. that means I have a SLOW device.. set a longer delay then.

Related

Changing Default Input method Bombs out Device

Done this twice. First with Wizard Reg Tweak and then with SK Tools
Both times I set Resco Keyboard as the Deff Input app.
Both times after soft reset device boots into a white screen and does no more. I need to do a hard reset and re load
Just a Heads up.
Any one know a way to set resco keyboard as default as it always resets to normal keyboard.
Jules

TouchPal wont show after a while

Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
iv got version 3.5 aswel, iv had no problems with it
the only problem i have is that, in landscape mode the key sizes dont increase, it appears small, but never the less a great keyboard
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
gt112 said:
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
Click to expand...
Click to collapse
just tried that, no problem what so ever
try this
uninstall, soft reset, install, soft reset, then go to settings, inputs, choose touchpal as default keyboard, then press ok, then soft reset
i know thats long but it should do the trick, seems to me as if that it wasnt installed correctly and theres some errors, so try what i said and let me know if it works
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
gt112 said:
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
Click to expand...
Click to collapse
just the thread, i guess your right, your not alone...but..its still wierd as iv been using touchpal since last wednesday and its still working fine for me
could it be that touchpal is conflicting with another keyboard on the device?
Have you gone to settings/inputs and selected touchpal as the keyboard?
I cant think of any other ideas because its working perfectly for me
Thanks xdaman
Just done a new re-install and it seems ok now. TBH I am now using the version from Cooltek so I may have had myself to blame.
On another note, I am having probs setting custom commands, I have the followig questions, can anyone offer any wisdom ?
You can setup custom commands such as Ctrl+z etc. They can be stored in place holders accessed by tab+downslide on the Control Tab button (the one with the 4 arrows). The instructions for creating custom command scan be found in the manual (section 4.2) here
Here are my questions
1. How do you create a combination command? e.g. They have a built in command called "Select All && Copy". This is 2 commands. How do you create this ?
2. After I mess up all my command buttons. How do I reset them to their defaults ?
3. When I create a command, Is Flag5 the ASCII key code? The manual is not specific on this. Also, if Flag5 is the ASCII code, why do I need to then enter the Alphabet index of the letter ?
4. I only seem to be able to edit the top Custom command button. If I try and assign values to the lower buttons, the edit appears in the top button. Is this a bug ?
cant install/wont install
downloaded the cab file..after it ran..it looks like explorer window pops up and tried to o something..anyway it says the page cant be found..tried loading in both card and local and get the same response..it does tell me the it was unsuccessful in loading
i gues its the lastest becuase i downloaded from the site
gt112 said:
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
Click to expand...
Click to collapse

Touchpal freezing

Hi,
I use Touchpal V3.5 and i absolutely love it, if you haven't tired it I highly recommend it, especially good is the mixed language input and I actually type faster using touchpal+gsen in landscape mode than I did with a hardware keyboard (a worry that almost prevented me from buying this marvelous device). I do have two little niggles that would be great if i could overcome somehow:
1. Setting Touchpal to the default keyboard does not stick after a restart/reset. I have to change the keyboard each time i start up. I tried SIP Change but it doesn't seem to have an option for running at start-up....anyone know if i can get at the registry somewhere or something?
2. When I first open it, if i try to type in Chinese before using English, it freezes in a bad way, disabling EVERY window that tries to call the sip and requiring a soft reset to make the phone useable again. If I open it, type something in english, and then switch the input to chinese it runs like a charm until I restart again...what is that about?
Actually neither of these issues is a deal breaker, but it would be nice not to have to worry about it, is anyone else having these troubles?...any suggestions are greatly appreciated!
touchpal
i have touchpal also and cant keep it as default. Ive tried all the fixes there are on all the threads. Doesnt work for Touchpal. any suggestions or fixes would be greatly appreciated.
Well I figured out the answer to problem one on my own...TF3D takes a little time to load and interferes with SipChange so you need to adjust the delay so as to happen after TF3D is finished.
Just tap SIPChange, select the IM you want, and set the time to 45 seconds (shorter may work). Bingo, stays the default IM on restart
whats the difference (apart from it's tabulated) between touchpal and "compact QWERTY" mode keyboard?
you also need to Go make this change: HKCU\Software\HTC\BootLauncher\Apps and remove the folder called "Startkey"
I have the same problem with touchpal, where do i do this?
Just tap SIPChange, select the IM you want, and set the time to 45 seconds (shorter may work). Bingo, stays the default IM on restart
@FRUSTIN:
TOuchpal is third-party software by CooTek, "Compact Querty" is just a different layout for the tock HTC input method. TOuchpal is MUCH more feature rich and just kicks the [email protected] out of the default keyboard in every way, it supports tons of languages and multi-language input (go back and forth between two languages in the same sentence without changing any settings), web hotkeys, adds copy/cut/paste and D-pad to EVERY app, etc. check it out at www.cootek.com
@DIAMONDBS:
I did NOT do that and it works perfectly for me...why do you need to remove an entire folder from the registry? Can anone confirm this?
@WEETABIX1980:
Just go to start>programs>SIP Change, when the program opens you select Touchpal from the list of input methods and then change the numbers in the box below the list to 45, then click "Select"...should be the only button there...tapping "OK" is not good enough, be sure to tap "Select"
thanks, any clue what sip change in dutch is in the programs?
anyone knows this?
SIPChange is a little tool developed here at XDA:
http://forum.xda-developers.com/showthread.php?t=271008
Download the cab to your phone and install. This should then give you the options mentioned above.
Touchpal intermittantly hangs on me aswell. I post on here about it before. I tried allsorts to cure it (hard resets, clean installs etc). So annoying when demoing the phone to a friend and all of a sudden the keyboard hangs and wont popup.
I used to love Touchpal, now I hate it and will not install it on my phone.

default keyboard keeps changing back to original

when ever i aet a custom keyboard as my default it changes after i restart my phone :s
any ides why or a fix?
From Finger Keyboard 2 thread:
Rozenthal said:
SIP CHANGE:
Installing this will allow you to keep FingerKeyboard as default keyboard after you soft-reset the device. Normally, it would switch back to default WinMo keyboard after every soft-reset, and it would have to be reselected under input options. Keep in mind that for this to work with Touch HD, you must increase the timeout delay to at least 50 seconds!
Click to expand...
Click to collapse
I have this problem too, and even after Finger Keyboard 2, it still changes back after soft reset.
I don't know if we'd need to change that timeout setting. It's not clear how to do that.
The old version of Shap's Advanced Config xxxxxxxx [edit]
EDIT: I got confused. See the post below about using SKTools to do it. That's what I used
10 second delay has worked for me with both the Blackstone keypad and Finger Keyboard 2.
hi guys.
i found better solution.install latest sktools.start sktools.choose category.under maintenance/input methods choose fingerkeyboard as default keyboard and soft reset sexperia.voilayour default keyboard is fingerkeyboard v2.cheers

Turn off XT9 permanently and stop it from interfering with Swype?

I've installed Swype and really like it. I'm using SIPchange to enable it as a default. Unfortunately, XT9 will interfere with the words selected by Swype even after you've picked the right word. The only way to disable this is to manually change to Touch Input keyboard and disable XT9 on the keyboard before changing back to Swype.
I've already disabled both Spell Correction and Word Completion in Touch Input under Settings> Personal> Input> Touch Input> Options, but XT9 still turns on the next time I restart the phone.
Hi, I'm using swype too and haven't noticed any interference from XT9, but I might not have known what I'm looking for.
What are your symptoms?
I have had that happen to me before on certain Roms... cant tell you which one... usually, it works fine (I am using Topix Rom now)
When it did happen, I turned off XT9 under the settings but I ALSO opened the default keyboard and turned it off there but pressing the key.... moved back to swype after that and the xt9 word options were gone... just the usual swype dictionary/options at times.... Soft reset didn't change anything... it was all ok still
Hope this helps
Unfortunately for me, once I shutdown/soft reset the phone, XT9 is automatically activated on the Touch Input keyboard again even though everything has already been turned off in the Settings>Personal>Input. Also, it seems that the Touch Input keyboard automatically defaults to one of the Chinese input methods instead of English. Maybe that's where the problem lies. Where can I default the Touch Input keyboard to English?
BTW, I have my Locale set as Australia, so that isn't the problem.
The symptoms are: Once you've "Swyped" the word and pick the one you want, XT9 then shows up with it's word choices and either shows the same word or if I have it initial caps, make it all small letters
I also noticed that in Settings>Personal>Input, when I select Swype then click the "OK" button, it doesn't save the selection, and goes back to "Touch Input" when I open the "Input" dialogue again. I guess this probably means that some of my registry entries are toast...
That is indeed weird... do you have something like SIP change installed? I use that to start Swype by default during startup after a restart.. Don't know if that might help...
Yes, I do have SIPchange installed, but it's already set to Swype as the default.
I had the same problem and this is my partial solution.
Go to HKLM/Softwares/Tegic/eT9/IsSupportMSSIPContact
Change the Dword from 1 to 0.
this will get rid of XT9 for Swype but only if it is NOT the default. Therefore, there is the nagging inconvenience of having to change it to Swype every time your soft reset. But it is better than that nothing.
Thanks for the partial solution. It's at least better than what I'm doing now after every reboot, which is to:
1. change Swype to Touch Input
2. change Touch Input to EN so that the keyboard shows up
3. click on the XT9/ABC button
4. change Touch Input back to Swype..
One thing to note, I just went to the registry and there isn't the value you listed. However, there is the following string value:
HKLM\Software\Tegic\eT9\LRU_MS_InputMethod and the value is Swype.
I'm wondering if this is what is causing XT9 to activate when Swype is active.. Do you have this value in your registry? what value is it?
Quick edit to note that I added a DWORD IsSupportMSSIPContact with value "0" and soft reset... Sorry to say that it didn't disable XT9 even if Touch Input was defaulted. Guess my problem is slightly different than yours.
Yes, all those values are the same. Need ot check if you also disable xt9 using some .cab. If not then you will need to do the following:
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Ime File
Change it to read as compime.dll
and
HKLM\System\CurrentControlSet\Control\Layouts\e0010409\Layout Text
Change to COMP IME
This will disable eT9. Please remember the original values should you want to revert back.
I think that should work.
have fun.
weenween, the two registry values you gave are already what is on my phone..
But XT9 still enables itself when I restart the phone. I've now resigned myself to disabling XT9 on the Touch Input keyboard manually each time I restart the phone.
In any case, thanks for your help.
I have exactly the same problem adn symptoms as GregWee. Must be becasue we both have Hong Kong HD2s where the default english keyboard is PinYin?
I have a similar issue. I have a TMOUS HD2 with QQ 2010 mobile loaded on it for chinese text entry. The QQ keypad has become the default everytime I reboot - entirely unwanted. Somehow it interferes with the contact dropdown list in messaging and email. It has something to do with the T9 staying on when entering a contact name. I installed sipchange but it does not overide the QQ default after a soft reset.
After changing between keyboards a few time it begins to work properly in email and then finally in messages. Right now, since the last soft reboot and playing around, when I am in either email or messages the stock keyboard will automatically switch from T9 to abc when I move the cursor to enter a contact name. The contacts appear as I type as they should. Swype works fine too. I have no idea what I did to get it to work but I have had the same experience several times today. Hopefully I will figure it out.
I would like to know a way to override the QQ as the default keyboard. I think this might fix the problem.
Any suggestions?

Categories

Resources