(REQUEST) Screensaver supportıng gıfs? - Windows Mobile Development and Hacking General

Hello fellas!
My HTC Touch doesnt support any kınd of screensaver somehow and ım curıous ıf there ıs anythıng whıch ı could use for ıt... ım consıderıng for anımated gıfs gettıng on after few mınutes and any kınd of gesture does dısable ıt quıck.
Is thıs already avaıble? If not, ıs anyone able to create somethıng lıke thıs? I guess ım not the only one lookıng for such app
Thanks ın advanche!
Regards
Sercıo
Btw ı know ı could use Slıde2unlock but ım lookıng for a standalone Gıf anımatıon on the screen and s2u leeches a huge amount of my dear RAM
Uptade:
I also got the ıdea to put some Gıf anımatıons ınto a specıfıc folder and the screensaver applıcatıon randomly chooses one to play....

sercio said:
Hello fellas!
My HTC Touch doesnt support any kınd of screensaver somehow and ım curıous ıf there ıs anythıng whıch ı could use for ıt... ım consıderıng for anımated gıfs gettıng on after few mınutes and any kınd of gesture does dısable ıt quıck.
Is thıs already avaıble? If not, ıs anyone able to create somethıng lıke thıs? I guess ım not the only one lookıng for such app
Thanks ın advanche!
Regards
Sercıo
Btw ı know ı could use Slıde2unlock but ım lookıng for a standalone Gıf anımatıon on the screen and s2u leeches a huge amount of my dear RAM
Uptade:
I also got the ıdea to put some Gıf anımatıons ınto a specıfıc folder and the screensaver applıcatıon randomly chooses one to play....
Click to expand...
Click to collapse
There may be something out there, but S2U2 is the best option. You say S2U2 takes your RAM? The Touch has tons, so you must have something wrong there. Either way, an animated screen saver will drain your battery and consume some memory, but not much more than S2U2 would.

As far as ı know does the Touch "only" have 64mb RAM and many of ıt already goes away for SPB mobıle shell and plugıns lıke battery status etc...
Addıtıonally ı dont lıke the s2u optıon because the HUD annoys me and ı dont lıke to slıde somethıng always.

sercio said:
As far as i know does the Touch "only" have 64mb RAM and many of it already goes away for SPB mobile shell and plugins like battery status etc...
Additionally i dont like the s2u option because the HUD annoys me and i dont like to slide something always.
Click to expand...
Click to collapse
64? The Touch has 128MB.

nope not my one (XDA elf)

Let me clear up memory question..............
Latest model HTC Touch Enhanced P3452/ Elfin GSM model has 256mb ROM + 128mb RAM
Older Original HTC Touch / Elf has 128mb ROM + 64mb RAM
So older Touch has just half the memory to play with. My 128mb Ram HTC Enchanced has about 68mb free running Mobile Shell and Pocket Plus so an orginal Touch would have hardly any memory left running these apps.

Correct! Thats why ım lookıng for a Gif screensaver whıch dırectly reads the gıf and dont save the whole amount of subpıctures ınto the memory lıke s2u does...

No answers? Is thıs such hard to do?

Sercio,
Every mobile phone I have owed in the past 4 years can display a animated Gif as its screen saver. But none of my Pocket PCs can do this simple task and I was very happy that S2u had this missing feature. I think the reason you have had no reply is because what you want does not exist. I spent ages looking for screen saver software and never found a thing. That was about 6 months ago and I dont think anything has changed except for SU2.

Hmm weırd! There ıs almost nothıng ı dıdnt found for my PDA S: I cant ımagıne that ıts that dıffıcault to code a sımple screensaver
I hope ım not the only one lookıng for thıs...

Related

[SKN]Diamond Calculator VGA Skin V2 [Updated 08.02.08]

Hi to all !
UPDATED 08.02.08 !
V2 available.
Bugs corrected.
See pics below.
PLEASE RELOAD !!!
This is a little contribution for the HTC diamond.
Available for portrait and land mode in true VGA.
- Choose black or white skin folder.
- Install SPB calc CAB.
- Copy "Spbcalc_P_VGA" and "Spbcalc_L_VGA" files in windows folder with "Total Commander" or others.
- Do a soft reset.
- Enjoy !!!
Black Version :
White Version :
Looks great - cant wait to try it out. Thanks
Thats a lot better than the stock version. I was very disappointed with the original one.
Thank you
Yeah !
And what about a white diamond skin ?
Skin updated !
You can choose black or white skin.
Hope you like it !
Thanks
Thanks, looks good........but my calculator keys are not as yours..they travel inward as if you drew them with a horizon point 110mm towards the top.....like looking down an airport runway
2395 said:
Thanks, looks good........but my calculator keys are not as yours..they travel inward as if you drew them with a horizon point 110mm towards the top.....like looking down an airport runway
Click to expand...
Click to collapse
Ya, mine does the same. Still better than what it originally came with though.
2395 said:
Thanks, looks good........but my calculator keys are not as yours..they travel inward as if you drew them with a horizon point 110mm towards the top.....like looking down an airport runway
Click to expand...
Click to collapse
Like this ?
If yes, this one is original SPB black skin ...
You must read first post ! ...
1 : Install CAB in main memory.
2 : With "total commander" copy "diamond calculator skin" files (spbcalc_P & spbcalc_L) in windows folder.
3 : Enjoy DIAMOND Calculator Skin !
Thanks Lord Ghost
Thanks....I have found the problem
I followed your advice and reloaded your files...new download.
removed previous version and graphics
reloaded and reinstalled
graphic remained the same [wrong]
re saved the new graphic again....still the same [wrong]
soft reset made no differance
restarted calculator again and graphic was as before [wrong]
turned to landscape...Graphic was corect
turned back to portrait....graphic is now corect..
Windows must somehow cache the graphic and does not re cache until you turn the diamond to another position and then back....soft reset made no differance.
Working fantastic now...thanks from all of us.
Thanks..tested the theory
Thanks again Lord Ghost,
I tested me theory by altering your excellant graphic [and thanks for your hard and excellant work] by lightening the black so as to make it slightly better visable on the diamond.
copied them accross and yes your original graphic [cached] is there...rotated and the new graphic switches in....mystery.
Have included your graphic [you deserve the praise] with my slight allteration in contrast etc.
If you want to use...copy extracted graphics to Diamond's windows [replacing original graphics] start calculator...old graphic will be there...rotate...new graphics will click in.
Again many thanks
Hi, I've tried this on and nice work. Thank you.
However, when I uninstalled the cab file, then the calculator no longer exists?
has anybody got the same problem?
Nice work!
I have reskinned this calculator a lot to many different themes (QVGA), and was planning on a VGA version... No need anymore!
One thing though, your dot-key is one pixel off (to the left).
princEd said:
Hi, I've tried this on and nice work. Thank you.
However, when I uninstalled the cab file, then the calculator no longer exists?
has anybody got the same problem?
Click to expand...
Click to collapse
What do you mean by uninstalling the cab-file? If you don't want to store the cab-file after installing, just delete it. If you use "remove programs" however, you will uninstall the program itself.
If you are missing the original calculator after uninstalling this version, you are right. The installing of this version overwrites the original files. They are not back-upped somewhere, so the will be gone. You have to find a installer-cab for the original files somewhere.
Skin updated !
V2 is available.
See first post and reload.
Thanx and enjoy !
WELL DONE........
HTC Diamond Calulator Skin
Hi, Noobie here ..
I still have the same "airport runway effect " desipte remove and reload .
a) Have use Resco to copy the gif files from internal memory to /mydevices/windows.
b) Also try rotating the Cal from landscape to portrait .
Despite this .. The airport effect remains .. Wonder if the key here is using TOtal Commander or Resco ?
Can anyone throw a light and advise a poor new noobie here ?
using Rom 1.37.871.3WWE
Sorry Lord Ghost but...
Sorry Lord Ghost but...white graphics work...black graphics are not compatible...file size inconsistancy or ....
jasper_tay said:
Hi, Noobie here ..
I still have the same "airport runway effect " desipte remove and reload .
a) Have use Resco to copy the gif files from internal memory to /mydevices/windows.
b) Also try rotating the Cal from landscape to portrait .
Despite this .. The airport effect remains .. Wonder if the key here is using TOtal Commander or Resco ?
Can anyone throw a light and advise a poor new noobie here ?
using Rom 1.37.871.3WWE
Click to expand...
Click to collapse
I've no problem whatsoever, all works fine. Rotating works fine. Clashing with another tweak?
halloj said:
I've no problem whatsoever, all works fine. Rotating works fine. Clashing with another tweak?
Click to expand...
Click to collapse
Not sure ...
a) I transfer from PC to internal memory, 3 files , the gif files and cab file.
b) Then I install from internal memory which gives you an option whethre to install into main or internal; which i selected main ...
Earlier post states , main memory ... wonder if that got to do with the transfer ? which is highly not possible ... otherwise Cal will not even work at all .
I really wonder why ?
DO you any possible conflicts with tweaks ? Just got my Diamond few days back ...
Sigh !
Since it is written in main.. guess , I may need a hard reset .. if I cannot find .. start all over again !
Thanks much better than the original one

Iphone-like taskbar

Hi folks,
Is there a way to have exactly this bar permanently on today screen? The pic was taken from an Ifonz screenshot.
I have a Gsmart VGA WM6.0 pro.
I tried Wisbar and other stuff but no way..too heavy and not user friendly at all. The best would be a kinda tsk file or whatever... any help?
Thanx for the great forum..Bye.
The only way to have it permanently there is to use PointUI which has the top bar. Its not quite like the iphone bar, but it has what you need and acts as a task switcher as well as a way to get back to the pointui home screen.
I have asked the developer of the today life program (xml config tool with themes) he is making if he was planning on making a permanent top bar. But he didn't seem to care... such a shame too since it is useful.
Wisbar is the easiest way.
You won't get that without additional software.
Are you sure that PointUi is VGA compatible? I tried it before but it didn't work.
Which version? I believe the latest one is (it may be a seperate cab).
perseus75 said:
Are you sure that PointUi is VGA compatible? I tried it before but it didn't work.
Click to expand...
Click to collapse
Well, they did a test version in the old 1.02 version. I don't think they ever did anything for their new 1.5 version in vga.
http://forums.pointui.com/viewtopic.php?f=12&t=862&st=0&sk=t&sd=a
There are some other vga programs listed in that thread that may interest you.
- problem is that this tasbar is much smaler than the original wm6-one.
- also the icons, text, everything is completly different. windows can´t handle this.
- so the only way to get exactly this taskbar is a net application that runnes over windows mobile.
- why should the programmer of todaylife make a new taskbar when he created a complete Gui thats above windows mobile ? funny !
- if you look at my thread (bluephone) you find a todaylife skin with a original iphone taskbar.
I will try PointUi 1.02 alpha and post feedback.
Thanx guys.
bluemetalaxe said:
- problem is that this tasbar is much smaler than the original wm6-one.
- also the icons, text, everything is completly different. windows can´t handle this.
- so the only way to get exactly this taskbar is a net application that runnes over windows mobile.
- why should the programmer of todaylife make a new taskbar when he created a complete Gui thats above windows mobile ? funny !
- if you look at my thread (bluephone) you find a todaylife skin with a original iphone taskbar.
Click to expand...
Click to collapse
Why? He created a complete gui thats above WM, great! But it loses its functionality the moment you open a program and it goes back to the WM interface, top taskbar. I thought it was supposed to be "above" WM? How do you get back to the today life screen?
You even created a skin for today life and I tried it. Sadly, it doesn't feel like a gui replacement for WM when the taskbar changes to the ugly, non functional WM bar.
I don't know anything about programming. But there must be a way to keep that bar at the top. *sigh*
all apps are programmed for the big wm taskbar, even if someone could manage to let a new small iphone tasbar stay on top and hide the original bar, you would have a ugly free space between taskbar and any application. So you want nothing more than programm every available software for windows mobile new
so i can tell you just this two words: Not possible ! believe it or not.
perseus75 said:
Hi folks,
Is there a way to have exactly this bar permanently on today screen? The pic was taken from an Ifonz screenshot.
I have a Gsmart VGA WM6.0 pro.
I tried Wisbar and other stuff but no way..too heavy and not user friendly at all. The best would be a kinda tsk file or whatever... any help?
Thanx for the great forum..Bye.
Click to expand...
Click to collapse
Wisbar. It's pretty easy to make a skin like that, and it's not as heavy as you mention. Give it a second try!
perseus75 said:
I will try PointUi 1.02 alpha and post feedback.
Thanx guys.
Click to expand...
Click to collapse
PointUi alpha 1.02:
seems quite fine and fluid on my Gsmart WM6. I only hope it will be developped for VGA devices.
Wisbar:
I'm still not satisfied with Wisbar 3. It eats my ram and freezes the ppc. Not worth keeping it installed.
I'll keep the original WM interface as it is. Only some spb plugins will be kept in wait of some new advice or suggestion from the forum.
Thanx guys for all the enriching posts.
Ciao ciao.
perseus75 said:
Wisbar:
I'm still not satisfied with Wisbar 3. It eats my ram and freezes the ppc. Not worth keeping it installed.
Click to expand...
Click to collapse
It 'eats' about 300K on my device. I don't find that very much. Many plugins are more hungry.
as Syd159 said. It does not eat too much and I never had freez caused by Wisbar. It is normal app in combination with Ultimate launch (or SBP Pocket plus) you got total "new phone"
Syd159 said:
It 'eats' about 300K on my device. I don't find that very much. Many plugins are more hungry.
Click to expand...
Click to collapse
yes wisbar do consume lot of RAM and slow down my phone so I did't use it anymore
Imho I think that a today plugin like Gsmart glass can be worth trying. I like the gui and it belongs to Gigabyte (like my device ).
Have you guys tried it? If so is it that good?
can someone please help me! im trying to find a tiny today plugin that shows u ur GSM carrier name/logo ...mine is ROGERS ...just so i know that i have my GSM activated on my today screen!
builtin 'wireless' today item takes up too much space ,plus it displays wifi and bluetooth icons which i don't have a need for
cheers
for example in this pic, where it says Phone Off, i wud b nice if had a rogers logo or some type of Green icon so i know my gsm carrier is ONLINE
kleptodathief said:
can someone please help me! im trying to find a tiny today plugin that shows u ur GSM carrier name/logo ...mine is ROGERS ...just so i know that i have my GSM activated on my today screen!
builtin 'wireless' today item takes up too much space ,plus it displays wifi and bluetooth icons which i don't have a need for
cheers
for example in this pic, where it says Phone Off, i wud b nice if had a rogers logo or some type of Green icon so i know my gsm carrier is ONLINE
Click to expand...
Click to collapse
I'd suggest something like BatteryStatus (although it has a new name which I have forgotten!) with a skin with just GSM Status.
Also, whilst it's good not having another thread, you're more likely to get an answer in the Questions and Answers sticky.
any developement in this taskbar?

HTC Touch - Newbie - Help

Hi guys,
Welcome me to the family of HTC and WinMO. I bought HTC Touch yesterday and felt I am on the top of the world. It is purely exhilarating. The features, touch screen, touch flo, awesome. This is my first WinMO and Touchy.
I need some clarifications,
1. How should I bring the big digital clock in my desktop. Now I have a normal clock with hands. I tapped on it and holded for few secs, I then get the clock settings but no where can see the digital clock makeover.(Googled and tried).
I also tried to go to Start > Settings > Today > Items, removed TouchGlo and enabled HTCHome, stil same, enabled both, stil same and vice versa, stil same.
Please help me out in getting the digital clock.
2. I connected my HTC to my laptop in order to transfer music and wallpapers. But I need everything to be transferred to the card and not to the Phone. But I dunno where to put all the files in the card since it is not having any defined folders for music, pics.
Should I put it just in the card or should I create separate folders?
3. One step further, I always mod my mobile, like I do for my Sony. Heard the same thing is possible in WinMO too. Can any1 point me to a tutorial so I can cook my HTC too the extreme??
T i A
[email protected] said:
Hi guys,
Welcome me to the family of HTC and WinMO. I bought HTC Touch yesterday and felt I am on the top of the world. It is purely exhilarating. The features, touch screen, touch flo, awesome. This is my first WinMO and Touchy.
I need some clarifications,
1. How should I bring the big digital clock in my desktop. Now I have a normal clock with hands. I tapped on it and holded for few secs, I then get the clock settings but no where can see the digital clock makeover.(Googled and tried).
I also tried to go to Start > Settings > Today > Items, removed TouchGlo and enabled HTCHome, stil same, enabled both, stil same and vice versa, stil same.
Please help me out in getting the digital clock.
2. I connected my HTC to my laptop in order to transfer music and wallpapers. But I need everything to be transferred to the card and not to the Phone. But I dunno where to put all the files in the card since it is not having any defined folders for music, pics.
Should I put it just in the card or should I create separate folders?
3. One step further, I always mod my mobile, like I do for my Sony. Heard the same thing is possible in WinMO too. Can any1 point me to a tutorial so I can cook my HTC too the extreme??
T i A
Click to expand...
Click to collapse
What device do you have specifically - HTC Touch Elf or Vogue
1. I have checked my settings on HTC touch Elfin and could not find how to change to Analogue clock - Mine is already digital - Perhaps check out HHC - HTC Home customizer which is available for free on this site
2. I created a seperate folder for music and movies on my storage card and just manually transfer them over to the folder on my storage card either through active sinc or using WIFI or Bluetooth. I havn't tried automatic sincronization of music into music folder - Don't know if you can to the storage card anyways.
3. To point you in the right direction you need to be specific as to which device you actually have. HTC Touch is not specific - Touch Vogue, Elf or Elfin - Or even Touch Diamond - Touch Pro, Touch Dual etc.....the ROM's you will try are device specific and if you flash the wrong ROM you could brick your device
Just install Manilla2D in development and hacking section your phone will rock then they will think you have the Touch Diamond
^^ thanks for the replies..here is the hardware and firmware details shown in my phone,
Windows Mobile 6.1 Pro
CE OS 5.2.19972
Processor: OMAP850-201MHz
ROM Version: 3.07.720.03 WWE
Radio version: 03.34.90
Protocol version: 4.1.13.71
Model No: ELF0100
Hope the above details are enuf.
@Sulten
Will Manilla2D work for the above detailed phone?? If yes, please let me know how to install it since I am newbie and do not want to brick my new phone.
Also one more query what is the 'CUBE'??? Is it available in my phone?? How to see it?
T i A
Cube : just swipe your finger upward from bottom of screen and up then side to side to rotate cube. These instructions should be in your owners manual. I suggest really learning more about your device and how to use it before flashing any ROM's. I suggest you start with other applications (CAB's) to install on your device to customize since most can easily be uninstalled if they don't function properly. Once you have done a lot of reading and understand your device better, then if you wish, you can tackle flashing a new ROM. I personally haven't even flashed a custom ROM yet onto my device, but am starting to get tempted. I havn't done enough reading on it yet to even try or offer any advice in that area
hotrod101 said:
Cube : just swipe your finger upward from bottom of screen and up then side to side to rotate cube. These instructions should be in your owners manual. I suggest really learning more about your device and how to use it before flashing any ROM's. I suggest you start with other applications (CAB's) to install on your device to customize since most can easily be uninstalled if they don't function properly. Once you have done a lot of reading and understand your device better, then if you wish, you can tackle flashing a new ROM. I personally haven't even flashed a custom ROM yet onto my device, but am starting to get tempted. I havn't done enough reading on it yet to even try or offer any advice in that area
Click to expand...
Click to collapse
I am not able to bring the CUBE into action!! Is it available in my version of phone??? I am not able to find any word with CUBE in the owners manual too. Should I do the above steps from the Home screen or???
@Sulten
Which version of Manilla will work for my version??? Pls advice.
I am desperate..pls any1 help
[email protected] said:
I am desperate..pls any1 help
Click to expand...
Click to collapse
Don't
First read and download this http://forum.xda-developers.com/showthread.php?t=418892 so you can give useful info on your device, then spend a few days reading the different elf forums to know what you want and then decide what to do. There's no point calling for help in general, you have to state what is your prob .
Based on what you already said if you want the cube DON' T disable touchflo, this is it !!!
Welcome to the club (we are all newbies here)
^^thnx m8..I already d/l that file..now used it and below are the complete details abt my HTC,
Touch version : Elfin
Device ID : ELF010050
CID : DOPOD001
IPL : 3.07.0002
SPL : 3.07.0000
ROM Version : 3.07.720.03
AKU Version : 1.2.7
Page Pool : 12 MB
RAM Size : 128 MB
ROM Size : 256 MB
Model No. : ELF0100
Hope this helps!!!
Today I went to a mall and looked at a HTC Touch displayed thr for sale..That touch phone had the digital clock in it..out of curiosity I checked the settings, today, items. There was no TouchFLO and only HTCHome was present and selected. But in my version, TouchFLO is selected, I deselected it, selected HTC Home and no display of clock is dsplayed..Is somethin missing in my phone??? blow r the screenshots..
HTC Touch showing HTCHomeplug
HTC Touch showing TouchFLO
Think the screenshot shuld help wat prob I am facing..
T i A
The above version shows what looks to me to be touch flo 2D. If you have a ROM Flashed with Touch FLo 2d then I don't think you will have the cube. Touch Flo for Elf (reg not touch flow 2d is not a home plugin - the settings are found under settings and it is only a box to check on or off. This enables the cube and swiping for regular touch flow. HTC Home Plugin should show a digital clock- some buttons for SMS, EMail, Missed calles, and under those, your home screen button, Weather, Shortcuts and Ringer settings. Depending on which version of HTC Home you have you may also find, Music player controls and Quick dial shortcusts buttons.
The buttons at the bottom of the above picture are your page selection buttons for home, email, pictures, music etc... I havn't installed Touch flo 2d yet on my device, so don't know much about how it runs on the elf, but do know that it can be installed or flashed onto a device VIA custom ROM. THis is what I think you have on your device - therfore no cube or HTC Home Plugin.
I have done no changes to the phone yet..it's factory default watever I have got..how to change/update my HTCHome??? I need the digital clock badly as well as the CUBE(Just to show off)..Kindly help me out.
BTW thnx for the fastest reply.
[email protected] said:
I have done no changes to the phone yet..it's factory default watever I have got..how to change/update my HTCHome??? I need the digital clock badly as well as the CUBE(Just to show off)..Kindly help me out.
BTW thnx for the fastest reply.
Click to expand...
Click to collapse
Hi
If you had read the forums, you would have noticed that your configuration is what everyone wants and the cube is being deactivated (taking too much mem and few applications). Anyway if you like the big clock you can install Htc Home. You can also try Homescreen plusplus for skins http://forum.xda-developers.com/showthread.php?t=350510
Greetings.
Ps refer to your device as an Elfin
thnx 4 the reply..but fm whr can i d/l htc home?? one more query..can v change the message tone to our own???
[email protected] said:
thnx 4 the reply..but fm whr can i d/l htc home?? one more query..can v change the message tone to our own???
Click to expand...
Click to collapse
There's a line just below Welcome, [email protected] , on the top right, use "Search"
Good luck
I have used the search in this forum and searched your ROM Version and it is infact from what I have read an official WM 6.1 with Touch flo 2d. You do not have the cube sorry to say. You have basically the same thing as the HTC OPAL. If you disable Touch FLo then you might be able to use HTC Home Plugin, but it is not likely already on your device (it wouldn't be stock) so you might want to look into this and download the HTC Home plugin and see if you can get it to run. Once you install it you will go into your today settings and click HTC Home Plugin to run - this will not work if Touch FLo 2d is running. I don't know if you can get the cube installed and working or not. I havn't read anything about it in the forums as most people who are using Touch flo 2d say that the cube is intentionally left out of the mix because it slows the device down terribly with Touch flo 2d. Most prefer touch flo 2d and don't care about the cube. If you want the cube - you will likely have to look into flashing a custom ROM (non touch flo 2d) for your elfin. I strongly suggest doing much reading before attempting to do so as you don't want to brick your device.
^^thnx m8..it was clear..as of now I wil drop the idea of having the cube..atleast I need the HTC home installed.
@tito12
It's not I am not doing the search, I have done everythin I could and finally landed up here to ask help frm u guys..so pls let me know frm where I can get the HTC home plugin installed for my version of HTC.
Check out my post in this thread - Post # 7
http://forum.xda-developers.com/showthread.php?p=2673928#post2673928
I have provided copies of the Cab's for the HTC home plugin which I am using that I have found elsewhere in this forum. Read my post as you might have problems with backlight as well (if it even works on your device) - If it doesn't work - I can't help you - If it messes your device right up - do a soft reset to see if it works and if not then hard reset and that should get rid of it and bring you back to factory default settings. Should be low risk trying it anyways. (Hard Reset will delete everything on your device you have put on - so you will may want to back up some of your files
^^I searched and found a thread which had the HTC home plugin cab..I d/l and installed and nothin changed..I have got the same with addl. IE icon on the top..stil no digitsl clock..Is ther any spl instructions to d/l the plugin you have directed..or just run the cab file???
You should only have to send the cab to your device. On your device, click it to install. Once installed go Start - settings - today and click the Items tab at bottom - Find HTC home and click the box there - Uncheck everything else for now and then add what you want after. Just to check that it is working. You might have to do a soft reset after installing it though. If it isn't working with a soft reset and by folowing the steps I have listed, then it's probably not compatable
^^ U R MY SAVIOUR M8..It worked worked..Bingo..Hurray..Thnx a bunch m8..I owe u till my life ends..here is the screeny of my HTCHome.
Now my other queries..is the time shown only in white or it shows in black too..I think I can now use the HTCHome Customizer and customize to my needs..am I right???
What abt my other query?? Is the sms tone changeable to mp3 tunes???
Thnx once again all!!!

HP Voice Messenger ROM?!? 530 - I've FOUND THE ROM! BUT IT'S IN CHINISE HELP :D

Hi Guys!!
There's any Rom for th Hp VoiceMessenger?
EDIT: there's?!? Yes! http://www.ioicn.com.cn/forum/thread-346491-1-2.html
But it's in chinese, how to swicht in WWE?
Suggestions?!
Gibla said:
Hi Guys!!
My home screen really sucks....how can I customise it?
Maybe there's some plugin...like the Excalibur?!?
PLS HELP!
any suggestions?!?
Let me know!!!
Click to expand...
Click to collapse
this is a good one
your today screen is just like wm6.5 if i think of it your all wm is like the wm6.5
(but with no touch screen)
users are tring all day long 2 get there devive 2 work like yours
anyway as for nav app i know tomtom have a Version 4 sp - smart phone (no touch screen )
windows mobile standard
as 4 your today screen googe 4 SBSH apps (apps 4 SP)
good luck
(nice device)
btw - how is your camera app? if i remember it wasn't so great but i tried this device when it was beta
Hi Erezyad!!
Yes, the home screen is like 6.5....but there's no buttun to change the panels
In the center there's something like a touchpad button, as the lateral Joggr in the Excalibur. I found a small HP Cab to choose the settings for that pad yesterday and now is better EVVAI!
I'd like to custumize the home screen, maybe it's possible to chage the icons or stuff like that.
Is really a good device, but now there's just 79 mb free storage on 256 mb.....that's a problem!! Why?!?
For the gps: I'm using Garmin XT, on COM 7 but no fix....what I have to do?
The camera program....it's pretty much difficul to use the digital zoom but I guess that it's possible to use the custum HTC program....I have to try it-!
Finally: no other people is interested here?!? There's only me?
first the device is called ipaq 530
as 4 icones this app is 4 pocket pc check if it works 4 u
http://classic.pocketgear.com/software_detail.asp?id=21828
u can also find on xda how 2 do it yourself (notepad....)
if i had such device first thing i was looking 4 was an app that will get me a pointer like a mouse (like the sumsung i780)
this way u can use the sensor u have 2 work with ppc apps(wm pro)
the sensor u have is like the ipaq 800 (data messenger) on hp rom (not vodaphone) they have such mouse meybe somone with ipaq ipaq data messenger can extract it from the rom (i had the vodaphone ver)
79mb ram is more then ok 4 wm pro, 4 sp it is a lot!! most devices that have 128/256 and have things like wm6.5 or manila have a lot less
as 4 rom u can get microsd so....
i remember the softkey of this device was very soft and with the sensor ("dpad") u dont need touch screen
(the device was good looking in my hand )
maybe i will get one soon
if so i wil try 2 help u more by tring gps apps...
(dot have it now so cannot help a lot,sorry )
EREZYAD said:
first the device is called ipaq 530
as 4 icones this app is 4 pocket pc check if it works 4 u
http://classic.pocketgear.com/software_detail.asp?id=21828
u can also find on xda how 2 do it yourself (notepad....)
if i had such device first thing i was looking 4 was an app that will get me a pointer like a mouse (like the sumsung i780)
this way u can use the sensor u have 2 work with ppc apps(wm pro)
the sensor u have is like the ipaq 800 (data messenger) on hp rom (not vodaphone) they have such mouse meybe somone with ipaq ipaq data messenger can extract it from the rom (i had the vodaphone ver)
79mb ram is more then ok 4 wm pro, 4 sp it is a lot!! most devices that have 128/256 and have things like wm6.5 or manila have a lot less
as 4 rom u can get microsd so....
i remember the softkey of this device was very soft and with the sensor ("dpad") u dont need touch screen
(the device was good looking in my hand )
maybe i will get one soon
if so i wil try 2 help u more by tring gps apps...
(dot have it now so cannot help a lot,sorry )
Click to expand...
Click to collapse
I found that finger mouse!
http://www.pocketpcfreeware.com/fr/index.php?soft=758
and here some fixes from HP official site:
http://h20000.www2.hp.com/bizsuppor...sId=3806508&swLang=8&taskId=135&swEnvOID=4036
I'm trying Sygic Maporama for the GPS....finger crossed!!
Do you have you Voice Messenger already?
Gibla said:
I found that finger mouse!
http://www.pocketpcfreeware.com/fr/index.php?soft=758
and here some fixes from HP official site:
http://h20000.www2.hp.com/bizsuppor...sId=3806508&swLang=8&taskId=135&swEnvOID=4036
I'm trying Sygic Maporama for the GPS....finger crossed!!
Do you have you Voice Messenger already?
Click to expand...
Click to collapse
dont have it yet
will try 2 get one of a friend (if i can)
anyway after getting one i will need 2 go over all function and edit option
then...
will keep u updated
COOL
I will wait I have to try to extract for doing something.... :S
So? There's any news? No one is intrested in a New Rom for that device?
Interested, yes!
Ain't got the know-how to make one, so no can do.
Come to think of it i don't even have a Voice Messenger yet
ROM 6.5 FOUND!!!
Here: http://www.ioicn.com.cn/forum/thread-346491-1-2.html
But it's in chinise
HeLLLLLLpppppppp how to add the wwe?!
hi,you also can download the 6.1&6.5rom from www.i3x.cc,i made all of them,and they are multilanguage,include english,when the rom bootup,you can go to start-setting-regional settings to change it to english
good luck~
gabby2006 said:
hi,you also can download the 6.1&6.5rom from www.i3x.cc,i made all of them,and they are multilanguage,include english,when the rom bootup,you can go to start-setting-regional settings to change it to english
good luck~
Click to expand...
Click to collapse
the like is broken
i entered this site and found the voice messenger threads
but
is it 4 the ipaq 530- the one with the gps?
(not the 510/2/4)
do u have screen shots (links...) of this rom?
can u upload 2 megauplod one (or more ) of your roms?
can u upload your tools?
tnx 4 the link
ipaq 530 bl mode
device fully off (take out battery ..)
press&hold key num 8 and power at the same time
only thing needed is the rom (and 4 me also the ipaq 530 )
maybe u can find someone that knows chinese
http://www.i3x.cc/forumdisplay.php?fid=76
Hi, I asked to translate....and someguys here on XDa told me that that ROMs are only in chinese...that was written in the forum...
So what we have to do? Please GABBY help us
first,530=voicemessenger
second,what i made the rom,wm6.1andwm6.5 are also multilanguage,include 0409(US English)and 0804(chinese)
there's two way you can use it in english
first way is flash the rom,and forrow the steps:
when the rom bootup,you can go to start-setting-regional settings to change it to english
second way is to do quite easy cook by the rom:
extra the rom and edit the default.hv&user.hv
change the system language to english(SysLan=0409)
i was busy on cooking DataMessenger rom and Treo pro rom,so haven't so many times to help you do it.
if next month onbody did a wwe 6.5rom for yous.i will do it for you.
p.s.sorry erveryone,my english is very poor.......
Hi Gabby,
as I written in the other thread I tryed to download the ROM but without success...
will be grat if you will upload the 6.1 and 6.5 on 4shared or Rapidshare if it's possible.
Thank you for you efforts!
http://rapidshare.com/files/279033269/HP_VoiceMessenger_WM61CHSv1Full.rar.html
i upload here
the wm6.5 rom which i made was not really a 6.5 core
voicemessenger's xip part is so strange,if i cook it and flash,it will can't boot.
so the wm6.5 rom is only contain sys part update.
Thanks for the link. Let us know if someone installs it and how it works. I will also download it and try to install it. By the way has someone the original rom in case something goes wrong???

Manila MOD for Caller ID Picture?!

Hello guys, i have a question.
Have alot softwares that have a full Screen Caller ID Pictures and etc but you know that every software use your phone memory and RAM so i think the Manila Sense Enought use your RAM and also from long time im asking myself Why in the screen caller of the Manila Dialer when you calling someone or someone calling you there have alot free space but the picture that appear is really SMALL, i don`t know so the question is
CAN WE USE this Free Space? Im taling about WVGA Devices we have alot blank free space
I don`t speak about FULL Screen Picture but its posible to be 2 times bigger than now and will be awsome.. because you don`t have need to install any 3rd part software to have this option!!!
I think that is posible with some Scrypt or some reg edit the whole layot to be the same just for example if now the pic is 240x320 to become on the same position 480x640 this is just an example.
In this case we can have in the manila dialer a Bigger caller ID picture and the change will not eat alot more CPU usage.
I Don`t know why so big place is just blank white instead to be with some Image...
Im not a programer and this is just idea so peoples who understand how to modify Manila files and Scrypt Maybe its posible?!
Regards
This would be nice in my opinion.
jrgolfpro said:
This would be nice in my opinion.
Click to expand...
Click to collapse
Yes the Blackstone and Leo have big screens and i don`t know why the contact image is so small when have alot of free spice to be alot more bigger, someone maybe can make a Manila Mod the caller id to use bigger Image?!

Categories

Resources