I'm new to this site and the ways of fooling with the details of this phone. I have an HTC Mogul 6800, WM 6.1, through Sprint. I am trying to install some "iPhone" type software and am stuck almost at the starting point. I'm trying to copy this file
welcomehead.96.png
into the /windows directory on the phone. Since that file already exists on the phone, it would appear that it needs to be overwritten. It won't overwrite as that file on the phone is marked as "read-only". How can I edit that file to remove the "read-only"
thanks
Why not just move the old file to another directory?
I believe you're trying to change the splash screen? Apparantly that file is locked as ROM file and so overwriting may not be possible. Why don;t you change the registry value to point to a different file? Refer this Splash Screen changing guide.
Preffered Registry editior: Free PHM Registry editor
Regards,
Carty..
The file is Read-only, so I can't move it. I tried installing the PHM Registry editor, it thinks it's a Microsoft Daylight savings time update.
glk21c said:
The file is Read-only, so I can't move it. I tried installing the PHM Registry editor, it thinks it's a Microsoft Daylight savings time update.
Click to expand...
Click to collapse
Use this......It's a file explorer that will overwrite most system files.
To unlock the registry which you really don't need to do for this simple file overwrite. Do a search for CERegEditor. It's a pc app that will sync to your phone and view aswell as edit your registry. There is a command within the program to unlock with.
lllboredlll said:
Use this......It's a file explorer that will overwrite most system files.
Click to expand...
Click to collapse
Definitely, I confirm this will overwrite that file.
lllboredlll said:
Use this......It's a file explorer that will overwrite most system files.
To unlock the registry which you really don't need to do for this simple file overwrite. Do a search for CERegEditor. It's a pc app that will sync to your phone and view aswell as edit your registry. There is a command within the program to unlock with.
Click to expand...
Click to collapse
I've actually had bad luck with Total Commander. I've successfully overwritten the file once out of a dozen tries. I've tried the Copy command as well as Move.
Anyone having better luck that can chime in? I'm wondering if I'm just missing a setting in Total Commander.
the 0ne said:
I've actually had bad luck with Total Commander. I've successfully overwritten the file once out of a dozen tries. I've tried the Copy command as well as Move.
Anyone having better luck that can chime in? I'm wondering if I'm just missing a setting in Total Commander.
Click to expand...
Click to collapse
Have you tried copy to clipboard?
You can also rename the file and then put the new one in there with the good one.
the 0ne said:
I've actually had bad luck with Total Commander. I've successfully overwritten the file once out of a dozen tries. I've tried the Copy command as well as Move.
Anyone having better luck that can chime in? I'm wondering if I'm just missing a setting in Total Commander.
Click to expand...
Click to collapse
Well I can overwrite with TC and GSFinder. I change my splash screen often due to boredom and I can't remember the last time I had an issue. Your ROM stock or Custom?
My ROM is stock. I guess I'll try this softwre listed above, hopefully I can change the value of this file as it can't be moved, overwritten or re-named right now.
Related
Sorry if this has been covered, looked but couldn't find anything detailed enough.
I'd like to change two of the files in the "windows" directory, specifically the phone app background files. (Using OzVGA they're currently not large enough).
I've made two new .bmps but cant copy over the original files (Bckgnd_Land.bmp & Bckgnd_Port.bmp) because they have the "Read-Only" and "System" attributes set. I can't change these attributes in File Explorer on the Universal, nor from within WinXPHome's Explorer while the device is connected. (I can see the attributes, but they're shaded and inaccessible).
Do I need another file explorer or something?? I think i saw a post where somene else had done something similar, but now can't find that post!!!
yes, use Resco Explorer or Total Commander
Please note that those files are in ROM, so you are not really overwriting them. You merely bend the pointer. As soon as you delete your own creation the old file handle is restored.
lbendlin said:
yes, use Resco Explorer or Total Commander
Please note that those files are in ROM, so you are not really overwriting them. You merely bend the pointer. As soon as you delete your own creation the old file handle is restored.
Click to expand...
Click to collapse
ok, cheers.
will try them.
lbendlin said:
yes, use Resco Explorer or Total Commander
Please note that those files are in ROM, so you are not really overwriting them. You merely bend the pointer. As soon as you delete your own creation the old file handle is restored.
Click to expand...
Click to collapse
So what you're saying is that I can't alter these files??
Installed Total Commander and although it appears to have the ability to change the attributes... it can't. I assume that's because they're in Rom?
Hello everybody
I searched 10 times this forum but i could not find it
IS there a way to change animated wait cursor ?? in HTC wizard ??
I found this program http://www.pocketgear.com/software_detail.asp?id=14638&associateid=162
but i don't think it will work with WM5
thanks,
DNO
yes there is a way. the icon is in a dll. so you need a dll editor. there´s a topic here somewhere in the forum. i read it the other day. just can´t remember where. Just look for dll editor or something like that. i think vijay555 changed his once to a hamster. just keep looking.
Yes there sure is.
It is in GWES.EXE and can be edited using a resource editor (google for Resource Hacker)
There are 16 bitmaps in the Bitmap section, running from 1024 to 1039 for QVGA and from 1040 to 1055 for VGA.
QVGA resolution in 32x32, VGA is 44x44
So change them with the resource editor and copy back GWES.EXE to
your device.
Cheers
thanks tweakradje
got it and I sure knwo how to change pics in dll, and exe
thank you very much
I found only gwes.exe.0409.mui in /windows
is this the one ??
tweakradje
I think you are using WM 2003
becuae in WM5 there is no file name gwes.exe
dno555 said:
I found only gwes.exe.0409.mui in /windows
is this the one ??
Click to expand...
Click to collapse
could be in there also
I think you are using WM 2003
becuae in WM5 there is no file name gwes.exe
Click to expand...
Click to collapse
I think you need to extract it from a ROM.
the file gwes.exe does exist. i can see it if i´m in resco file explorer. but i can´t copy it. i always get an encryption error. and if i go through activsync i can´t see it. then i only see the one you see. with the 0409 on it.
freezor said:
the file gwes.exe does exist. i can see it if i´m in resco file explorer. but i can´t copy it. i always get an encryption error. and if i go through activsync i can´t see it. then i only see the one you see. with the 0409 on it.
Click to expand...
Click to collapse
same here
yes it is in gwes.exe.0409.mui (US)
Some examples can be found here:
http://4pda.ru/forum/index.php?showtopic=25257
EDIT 8 feb 2007: Check this out http://www.masellis.com/wait/cartoons.htm
Cheers
Been looking into this for a while here, but have had no luck in WM5. I had this great Cartman eating Cheesy-Poofs animation in WM2003 that was so much fun.
Both "gwes.exe.0409.mui" and "gwes.exe" contain the icons that make up the animation for the busy/wait cursor.
Using Resource Hacker I made the change for those 16 icons in gwes.exe.0409.mui. Finally got it to overwrite the existing file in the /windows folder by creating a cab that replaced it after a restart. Unfortunately, even though the new file is now where the old one was, I'm still getting the old animation.
Did the same with gwes.exe using Resource Hacker, but for the life of me, I cannot find anyway of overwriting the file on my PPC. When I tried to overwrite by using the cab file install method, I get a message that says the install was unsuccessful because I didn't have permission to modify the file. I wish there were some way to overwrite the file while it was resetting, or even after a hard reset. I spent quite a bit of time trying to find a way to replace it via the Kitchen Rom avenue, but I couldn't do it.
Any ideas?
Hi,
You only need to replace \windows\gwes.exe.0409.mui in this case (rename the old one first) Then after a soft reset the new animation will show.
Mui must be activated though. Check
HKLM\MUI
Enable dword 0x1
Syslang dword 0x409
Cheers
Thanks tweakradje for the tip to rename gwes.exe.0409.mui first. I removed the read-only and system attributes, then renamed it to .old and it accepted that! Then copied my new file over, and I've got my Cartman back!! Wahooo!
Nice to hear. Can you share it here?
I am always interested.
Cheers
Hi,
You only need to replace \windows\gwes.exe.0409.mui in this case (rename the old one first) Then after a soft reset the new animation will show.
Mui must be activated though. Check
HKLM\MUI
Enable dword 0x1
Syslang dword 0x409
Cheers
Click to expand...
Click to collapse
I did that and was able to replace the file with the new one checked the reg settings, I also removed the gwes.exe.0409.old file and I still get the old animation. am I missing something?
do I need to edit the gwes.exe file too?
Hi,
Check in your registry if the MUI values are present and that SysLang is set to 0x409. Of course the file must be in \windows.
No need to change gwes.exe if MUI is working.
Cheers
tweakradje said:
Hi,
Check in your registry if the MUI values are present and that SysLang is set to 0x409. Of course the file must be in \windows.
No need to change gwes.exe if MUI is working.
Cheers
Click to expand...
Click to collapse
i also have a problem doing it. i am sure registry values are right as you said. but when i'm trying to rename the file it just won't rename, or change attributes... i'm using total commander... any ideas?
can somebody please post the original here? WM5
I kinda overwrote it by mistake
leepriestenator said:
can somebody please post the original here? WM5
I kinda overwrote it by mistake
Click to expand...
Click to collapse
how could you overwrote it? it's in rom so as far as i understand thac cannot be done... someone please put some light on the matter ;]
i would post the original, if only i could copy it anywhere outside windows folder... :/
Please, how to rename the gwes.exe.040C.mui.
I try under explorer and Resco explore, I can't, when I change properties of files, it came back to system and read only.
Thx.
JaY
Seems that with my WM5 it does not want to work with the Reg OK and the MUI files changed. It is still going with the icons in GWES.EXE and I cannot copy it from my device to change those icons and EVEN if I could, I would have to copy it back!
Any ideas how to copy over my GWES.EXE?
Hi folks,
I currently have a problem with file explorer. I opened the windows folder and now I am stuck with the time icon, I wait...and I wait... and nothing happens it freezes the phone. After a soft reset and then going back into file explorer it goes back to the folder I last looked at which is the windows folder and freezes again.. so basically I can't use file explorer anymore? Any suggestions?
Steve
Is it locking up? or does it just need more time to load and display all the contents of \windows. Can you minimize file explorer by pressing the hang up key and work on something else, then go back later to file explorer. Are you able to change directories now?
Are you using a shortcut to launch file explorer
I always use Total commander for file management and \windows does take a while to load. It too tries to open the last used directory but if the folder is not available, eg network share, it defaults to the root directory after a warning. Not the answer to your problem, I know, but Total Commander is free and it is much better featured than the standard file explorer.
wizzzard said:
Is it locking up? or does it just need more time to load and display all the contents of \windows. Can you minimize file explorer by pressing the hang up key and work on something else, then go back later to file explorer. Are you able to change directories now?
Are you using a shortcut to launch file explorer
I always use Total commander for file management and \windows does take a while to load. It too tries to open the last used directory but if the folder is not available, eg network share, it defaults to the root directory after a warning. Not the answer to your problem, I know, but Total Commander is free and it is much better featured than the standard file explorer.
Click to expand...
Click to collapse
Try this on a Registry Editor:
HKLM - Software - Microsoft - File Explorer - LastLocation - 0 (zero)
Soft Reset then try to launch File Explorer again.
steve43 said:
Hi folks,
I currently have a problem with file explorer. I opened the windows folder and now I am stuck with the time icon, I wait...and I wait... and nothing happens it freezes the phone. After a soft reset and then going back into file explorer it goes back to the folder I last looked at which is the windows folder and freezes again.. so basically I can't use file explorer anymore? Any suggestions?
Steve
Click to expand...
Click to collapse
IT WILL TAKE A WHILE IF IT IS SET TO TYPE FOR SOME REASON when the files finally display chnage where it says type to date and it will display quicker next time
Thanks folks, got it working. I needed to change the registery values. The phone was freezing up and even after 10 minutes was still not showing the contents of the windows folder.
Da_mayhem just fyi I edited the localpath folder from '/windows' to '/' this seemed to solve the problem. The lastlocation value was already set to 0 for some reason?
Thanks for your help guys...
Steve
steve43 said:
Thanks folks, got it working. I needed to change the registery values. The phone was freezing up and even after 10 minutes was still not showing the contents of the windows folder.
Da_mayhem just fyi I edited the localpath folder from '/windows' to '/' this seemed to solve the problem. The lastlocation value was already set to 0 for some reason?
Thanks for your help guys...
Steve
Click to expand...
Click to collapse
Nice to know it helped you somehow he he he
I seem to have the same Problem with my HTC Touch (non-branded, German Version). However I do not have the aforementioned registry values. There is no "file explorer" unter HKLM - Software - Microsoft.
Any Ideas on how to get my file explorer running again?
In the meantime I'm using TotalCommander, however TC doesn't support sending files via Bluetooth, or at least not that I know of. I can only send via Infrared, or am I missing something?
What is REGISTRY EDITOR? Please help me that! I m having the same problem on my XDA ORBIT ii
da_mayhem said:
Try this on a Registry Editor:
HKLM - Software - Microsoft - File Explorer - LastLocation - 0 (zero)
Soft Reset then try to launch File Explorer again.
Click to expand...
Click to collapse
I tried this, but didn't have a "File Explorer" entry. So I created one and the LastLocation value as noted, but it still opens in the Windows folder and locks up. Any clues?
Thanks,
JSR
AT&T Tilt
Stock ROM no bloatware
jsr said:
I tried this, but didn't have a "File Explorer" entry. So I created one and the LastLocation value as noted, but it still opens in the Windows folder and locks up. Any clues?
Thanks,
JSR
AT&T Tilt
Stock ROM no bloatware
Click to expand...
Click to collapse
perhaps because that is usualy in HKCU not HKLM.
S.V.I said:
perhaps because that is usualy in HKCU not HKLM.
Click to expand...
Click to collapse
I know this is an old post...but after extensive searching and frustration...S.V.I fixed my issue. I just wanted to say thanks to S.V.I
I couldn't find file explorer and it was freezing...like S.V.I pointed out- it is HKCU and not HKLM.
I had done 2 hard resets...and removing "windows" from the path fixed it.
Thanks to all that posted solutions here on this great site!
Update:
Spoke to soon...I can't enter my Windows folder at all using file explorer- I could earlier. I can enter anywhere else...just not my Window folder...I can with Resco explorer. I have to apply S.V.I suggestion to stop it from freezing...but magically-"\windows" keeps re-appearing in my registry.
Update:
Found another solution that actually worked for me!
open File Explorer
Click on Menu>Sort> change it to Name
I think i know the solution
i too have experienced the same problem like this. but then this is what i do. and it's surprisingly works.
1) soft reset your phone
2) click on file explorer again
3) the loading symbol will always appear, but for now just let it be.
4) close the file explorer by tapping 'hang up' key/button. this will supposedly bring you back to home screen
5) wait for half an hour or longer
6) open file explorer
7) the windows folder loaded successfully
Typos
Ayobi's solution worked.
I have a HTC Diamond 2 WM6.5. File explorer froze as I sorted the files in the Windows folder. Exactly followed Ayobi's suggestion. Got out of the mess.
I won't visit Windows folder again!!!
Thanks Ayobi and others for their suggestions.
Jay.
steve43 said:
Hi folks,
I currently have a problem with file explorer. I opened the windows folder and now I am stuck with the time icon, I wait...and I wait... and nothing happens it freezes the phone. After a soft reset and then going back into file explorer it goes back to the folder I last looked at which is the windows folder and freezes again.. so basically I can't use file explorer anymore? Any suggestions?
Steve
Click to expand...
Click to collapse
Hi, i have the same issue but currently do not have a registry editor installed. So i can't really follow the above instructions to resolve the issue. Any help with executing a .cab without file explorer?? got annoying aussie telstra rom installed
insanenyc said:
IT WILL TAKE A WHILE IF IT IS SET TO TYPE FOR SOME REASON when the files finally display chnage where it says type to date and it will display quicker next time
Click to expand...
Click to collapse
Definatly works. great help. thanks man.
insanenyc said:
IT WILL TAKE A WHILE IF IT IS SET TO TYPE FOR SOME REASON when the files finally display chnage where it says type to date and it will display quicker next time
Click to expand...
Click to collapse
This definitely worked - on a related note you can go into Registry Editor (HKCU - Software - Microsoft - File Explorer) and change the SortOrder value to anything but 2 (apparently 2 is for Type). Soft reset and reload the program, and it should load a lot faster.
da_mayhem said:
Try this on a Registry Editor:
HKLM - Software - Microsoft - File Explorer - LastLocation - 0 (zero)
Soft Reset then try to launch File Explorer again.
Click to expand...
Click to collapse
I had same problem, because I tried to sort Windows folder by file Type. Oops.
I know it's an old post, but here's my two cents (because this thread guided me to a slightly modified resolution.)
My resolution on Tilt2 TP2 WinMo 6.5 was found here:
HKCU - Software - Microsoft - File Explorer - LastLocation - 0 (zero)
HKCU - Software - Microsoft - File Explorer - LastPath - \ (slash)
HKCU - Software - Microsoft - File Explorer - SortOrder - 1
That did the trick for me. Was able to open File Explorer. Strangely, it took me to the Windows folder again; but didn't hang this time. Maybe because I skipped soft reset (so maybe registry change may not have taken effect entirely?)
Hi
I'd like to edit the file Preconfig.txt in \Windows. This file is protected. Is there any way to make a file in \Windows writable?
Thank you
Jean-Yves
If I recall correctly, you can copy the file out of the windows directory to another directory and then paste it back over the top of the protected one and then you can edit it.
I may be wrong though, so sorry if I'm leading you up the garden path!
What Codenix said is true, if the file is inside the ROM.
If the file is 'protected' in terms of attributes, you can use Total Commander to disable the attribute first.
I tried removing the read-only/system attributes in Total Commander in some \Windows files on my x01ht, but every time the attributes are reseted back! How to avoid this?!?
yes i have the same problem with you~~
although i use active sync to copy the files to ppc \windows
it also block me and say protected
and i want to copy a new phcanOverbmp.dll replace the old one....
what should i do???
can some brother help~!!!
Some files are in use and cant be unprotected and written over in this manner.. the only way to do it when it fails like that is to cook your own rom... which we are still trying to do, but get closer every day
And for the phcanOverbmp.dll we have cabs in the upgrading forum for this.. read here:
http://forum.xda-developers.com/showthread.php?t=287829
and why if i want to edit my start menu items from ASync it don't work?
The files are unprotected but from active sync explorer i can't delete/move it... with resco explorer there are no problems!..
Also.... it interrupt file transfers if i try to copy thumbs.db.. included in win folders :x
SkizZO said:
and why if i want to edit my start menu items from ASync it don't work?
The files are unprotected but from active sync explorer i can't delete/move it... with resco explorer there are no problems!..
Click to expand...
Click to collapse
I had the same problem - ActiveSync seems to not have the necessary rights for these files. The methods described here solved the problem for me. Yes, the text behind the link talks about problems with registry access, but the reasons and solutions for both problems are the same.
Also.... it interrupt file transfers if i try to copy thumbs.db.. included in win folders :x
Click to expand...
Click to collapse
That may or may not be the same problem. I would guess thumbs.db may just be in use (i.e., opened).
Cheers
Daniel
I tried to modify and delete trivial files in Windows folder,
but I cannot delete it anyway.
I also used total commander to modify file's write protection off, but the protection is protected by something.
I had no problem of messing with files in the folder when I used AT&T's rom.
Is there anyway I can solve this problem??
I'm using Schap's 4.00 rom.
Would suggest using resco explorer. Its a commercial app though but you can use it for a trial period (I think it was 14 days). This allows you to do just about anything. You will probably find that the files are being used or are in the ext rom. the file explorer that comes standard WONT allow any altering of these files. As I said, Resco will but it will give you warning that change could damage os. Hope this helps..... Cheers
If you are using Total Commander, select the file you are having trouble with and look at the file properties. If it is in rom, it will show a check mark in the bottom box, and should be greyed out, meaning that you can't change that.
Yes, it was Rom file, thanks.