Related
my friend dropped her 8525 and now shes got the white screen. my guess is the screen cable got disconnected, but if that happened then wouldnt the screen not even light up? she hasnt said shes seen any cracks on the screen, anyone know the problem?
mikeeey said:
my friend dropped her 8525 and now shes got the white screen. my guess is the screen cable got disconnected, but if that happened then wouldnt the screen not even light up? she hasnt said shes seen any cracks on the screen, anyone know the problem?
Click to expand...
Click to collapse
There are at least two multi connectors for the screen, one from digitizer and one to main board - so it's entirely possible screen is still receiving power but not signals from main board. That's not to rule out something more drastic but hopefully that's all it is.
Mike
mikechannon said:
There are at least two multi connectors for the screen, one from digitizer and one to main board - so it's entirely possible screen is still receiving power but not signals from main board. That's not to rule out something more drastic but hopefully that's all it is.
Mike
Click to expand...
Click to collapse
thanks, if that's the reason why then im sure shel be happy if i can fix it
Similar problems, but worse
mikechannon said:
There are at least two multi connectors for the screen, one from digitizer and one to main board - so it's entirely possible screen is still receiving power but not signals from main board. That's not to rule out something more drastic but hopefully that's all it is.
Mike
Click to expand...
Click to collapse
Hi Mike.
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell, the following day the call and end buttons remained lit and wouldn't turn off, they also wouldn't work.
I soft rest, nothing, I then removed the battey and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dappled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
CINGULAR IN JA said:
Hi Mike.
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell, the following day the call and end buttons remained lit and wouldn't turn off, they also wouldn't work.
I soft rest, nothing, I then removed the battey and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dappled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=1181116&postcount=12
Mike
Hi all, this is my first post on this forum but I've been reading for a while to educate myself.
I've got a Herm200 that I've been trying to troubleshoot but to no avail. I'm fairly certain that it has a hardware problem but I haven't been able to isolate anything.
Here's whats happening:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
When the screen turns all white a soft, hard, or stand-by cycle will not always bring it back to life. The fact that the hard reset wont always fix the problem makes me think it's a hardware issue since the phone will boot-up with the the all-white screen.
This is incredibly frustrating especially since HTC wont accept any warranty claims in the USA on the Tytn.
At first I thought this might be a problem with the ribon connection between the screen and the base but i haven't been able to confirm or discount anything at this point. I have yet to find a way to consistently reproduce or rectify the problem so it's very hard to troubleshoot.
I pretty much have to take a second phone with me everywhere right now just incase i need to make a call. Please help! Has anyone ever encountered such a problem?
Thank you in advance!
SneezyRobot said:
Occasionally the screen will come out of stand-by all white. This will also happen randomly if i touch the screen to perform a command. While the screen is operating, sometimes the buttons on the face will stop working, however the buttons across both sides will continue working just fine.
Click to expand...
Click to collapse
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
wow... that sounds like exactly what's going on here, I actually even tried to disassemble it lastnight but didnt have the right driver set. thank you for the advice!
I'll look for one of those sets but what would you search for if i needed to find it?
Thanks again, I just got a set off of Ebay. Hopefully it'll be here next week
With any luck it'll be a connection issue.
I have had the exact same problem. Because I got the Tytn through work I made our IT department handle the issue and I am currently waiting for a replacement and to find out what happened.
Yep, it looks like the problems the OP is having are very similar to the problems we've been having over in this thread:
http://forum.xda-developers.com/showthread.php?t=291027
I'm beginning to think it's a hardware problem as well but not entirely sure.
People in the above thread mentioned that using the scroll wheel a while then moving back to use the D pad fixed the problem (very briefly in my case.) Once I use the center D pad button again it locks the hardware buttons under the screen until I make my device sleep and resume.
Somtimes rather than making all the front hardware buttons unresponsive the issue is that once I use the Down Dpad button I can't use the up button. Pressing up will make it go down, as will pressing down (at least that's working ).
Regarding the white screen - this sometimes also occurs. I can force it to white screen by putting a little pressure on the silver panel surrounding the top, right and bottom of the screen (I have an imate jasjam). Randomly when there's no pressure on the rim and I wake it out of standby, it has a white screen that can only be fixed by turning the screen off and on again.
Finally, the LED indicator seems screwy. Sometimes it never flashes. Other times it flashes sporadically (uneven intervals - we're talking maybe a minute between one flash then seconds before another). When I charge it sometimes the LED doesn't come on but nevertheless it charges. Sometimes if the LED is on it never turns green to indicate a full charge. Yet other times it comes on orange, turns green, then never switches off!
Is it possible that
a) The hardware button problems.
b) The white screen problem.
c) The LED problem.
are all related to some kind of connection going loose? Why would the hardware button problem be temporarily fixable with use of the scroll wheel if this were the case?
The other thread has fallen silent. I'm hoping that some of the gurus in here can offer some input here, even if they don't know the answer but can formulate an opinion. I know very little about these devices.
Thanks in advance guys!
PS - don't really know if I should start another thread, I've posted here as it seems like very much the same issue.
Anybody any idea? advice?
I had a similar problem with my HERM100. I didn't mess around with it too much, I just had Cingular replace it out of warranty exchange (thank god those original ROMs are on the wiki ). I did notice however that after doing a master reset, the screen would function again although I haven't messed around with it too much. I got so frustrated with removing the battery for 5 minutes and STILL powering on with a white screen that I just threw it in my back seat until the new one arrived.
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Anyone anyone?
HELP!!!!
barncourt said:
Hi. This sounds very similar to a problem that I experienced with a HERMES100. I bought the phone off someone on Ebay recently - someone had obviously scrambled the radio on it. I re-flashed it, and it sprang to life. However, after a couple of days, I experienced a problem where occasionally the LCD would stop refreshing, all the pixels faded away leaving only a white screen. Under these circumstances, some of the buttons on the phone stopped working. Turning phone on/off sometimes cured the problem, or it would require the occasional hard reset. This would happen once or twice a day and I suspect thats why someone tried to re-flash the phone.
In the end, out of curiosity I took the entire phone apart, put it all back together again and now there are no more problems!! Totally fixed!
My suspicion is that it was one of the ribbon cable push connectors on the mainboard - possibly not seated properly, or a bit of dirt contaminating the connection. Obviously when I took the phone apart I must have re-seated it.
If you are planning to take your phone apart, please exercise considerable care because some of the parts are very small and easily damaged. I would recommend buying a proper kit to take it apart. I bought mine for about £5 off ebay. Particularly useful are the plastic spoon "wedges" used to gently prise open the case after removing the screens. Don't use a screwdriver - you will scratch the case.
Good luck.
Click to expand...
Click to collapse
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
CINGULAR IN JA said:
This is my first post as I've so far managed to cure all my issues from just reading the forum. However, I am now having a similar problem with the white screen.
I have a cingular 8525. It fell and the following day the call and end buttons remained lit and wouldn't turn off and they also wouldn't work.
I soft reset, nothing, I then removed the battery and when I turned it back on, there was a white screen and the buttons below still don't work.
I have read the other posts on this issue, but I need help on exactly what kit to buy to reconnect the screen cable and instructions on how to do it as I've never taken apart a phone before, although I have dabbled with other electronic devices.
Your help would be much appreciated, as I am in Jamaica and there are no technicians here who I trust to help.
Thanks in advance.
Below are links to 2 kits I'm thinking of getting. Is either one better than the other?
http://www.pdasmart.com/pdaphonehtcmini.htm?gclid=CJrHntO-hosCFQx1VAodaQf6KQ
http://cgi.ebay.com/SCREWDRIVERS-TO...01677255QQcategoryZ108648QQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
In my case, they also are always lit up when the screen is also active.
And no matter what ROM version, they occasionally stop responding. Side buttons keep working.
mikechannon said:
Both kits look ok. PDA one tells you a little more but the basics appear to be in both.
I'm curious though you soft reset and took the battery out, but have you done a HARD reset? I would always try this first before dismantling.
Mike
Click to expand...
Click to collapse
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
CINGULAR IN JA said:
Thanks for the response.
I couldn't do a hard reset because the buttons weren't working.
I have made some progress with the phone now. Found a tech guy who looked at it for me. The white screen is gone, but the buttons still stop working from time to time.
All the connections seem ok.
Is there anything else that could cause the buttons to malfunction?
Click to expand...
Click to collapse
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
mikechannon said:
Nothing obvious.
Have you got applications installed that you have loaded - could be one thats playing up.
Have you now been able to do a hard reset?
If taking device apart and reassembling improved things it does suggest hardware though and might be worth double checking all those multi-connector blocks for good connections - i.e. take them out and in a few times to ensure any oxidation on contacts is removed.
Mike
Click to expand...
Click to collapse
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
CINGULAR IN JA said:
Thanks Mike.
I will give that a shot.
I haven't installed any new applications recently, so I don't think it is a software issue.
Thanks again.
Click to expand...
Click to collapse
If it wouldn't be a software issue, why is it, in my case, instantly resolved when going to settings -> phone with the side buttons?
i had this problem i took it to a guy who fixed the problem he said it was a very small tear in the flex cable which causes this white screen every now ant then and the buton problem , sorry to say its the cable problem and u need a very capable person to fix it or replace it with a new one . its very common problem baised on the guy who fixed it .
dmxl said:
I don't have these screen issues. I only have hardware button problems. It's so damn frustrating! I already own a replacement.
I just received a call from my girlfriend. I wasn't able to answer the phone with the buttons, only with a screentap. I also wasn't able to close the call with the hardware button. Since the side buttons work, I went to settings -> phone, closed it, and there we go. The hardware buttons worked again.
Why the heck is this? I truly hope for some wizz out there with some advice, since HTC would only tell me to send it back after replacing it with a new TyTN with same issues.
Regards,
DM.
Click to expand...
Click to collapse
Exactly what is happening to me, no white screen issues, just screen taps and answering calls, I also have another problem where the PDA will not allow me to open anything, be it the start menu or contacts, it will open and quickly close again. I have had mine swapped through Telstra in Sydney, it worked fine for a while and then the same crap again. These problems started before I even touched the OS, so it must be a build problem. Maybe we should write a joint letter to HTC letting them know that there is a serious problem with their machine.
I have had the same problem, got my Tytn through work so we sent it back to the company that supplied it to us. Got it back yesterday and they had replaced the "switchboard". Not sure what it is but there was the problem. Had white screen and buttons not working.
Hi guys!
Long time no post!
I hope you can help point me in the right direction.
Two things started happening with my 8525 TyTN, rendering it unusable. I do have a backup one, so it's no panic. But I would LOVE to try to repair this.
Here's what happens!
1 - The two LEDs in front don't work! No green; no blue; no amber. (HOWEVER, When I first replaced the battery after a hard reset, I did see is glow red for a second!)
2 - None of the buttons on the front work! None. Start/End, the D-pad, mail, internet explorer. All dead!
Interestingly enough... the LCD screen is perfect, as is the touch screen.
The unit also works perfectly fine.
I did a Hard Reset.
I am using WM6.0.
I am wondering... PERHAPS there is some kind of ZIF cable that goes from the body to the top panel? MAYBE that came loose?
If you have seen inside your TyTN, is there one cable/ribbon for lights/buttons?
If so, that would explain it!
If there are two cables/ribbons.... one for lights, one for buttons, then the odds of them BOTH falling out are near impossible!
I would LOVE to hear any ideas or thoughts!!!
Thanks as always!!!!!
Mike
Hello and welcome to a new phone!
I have a similar problem, mine sometimes gets a white screen and the D-pad buttons rarely work for long.
It is quite possibly a loose ribbon cable.
There is actually a thread here about this issue - just do a search for 'white screen' or similar and you'll find it. It was posted to within the week so shouldn't be far from the top if you browse for it, but I can't remember which Herme's category it was in.
There's even a full guide with pics to pulling your 8525 apart!
Cheers! Oggy. ó¿ó
try a new rom,.
I have the same problem. I thought it was bcs my TyTN fell down once. It started with Iexplorer always popping up when I wanted to do something. I thought the IE button at the top was stuck or something and when I pressed hard on the message button everything was okay. All buttons worked. But after a few days they stopped working and pushing the message button wont work also. And both the red and green call button leds are always shining. It sometimes happens that the dpad works for a second and than nothing.
I used the original wm5 and flashed to 6.1 now, no change tho.
it's not the rom, tried several roms now
for me it's just the call answer button, but this is annoying enough
there are some topics in the hermes section which describe the problems you encounter or even worse problems (the lcd flickering or just giving you a bright shining white) and they all say it is a loose cable connector right under your dpad
some of them opened their tytn (guarante already gone) and put some sort of paper or rubber or sth else on the connector.
other say tighten or loosen the screews worked for them, but none of the solutions seem to be final, it always works for some time.
if you have still guarantee i would try sending back or try somewhere else a repair, that is what i will do with tytn
i hope i do not have to pay for the repair
good luck
Loose screw
I was able to fix this problem after ATT told me that I was out of warrenty and it was going to cost 499.00 for a new phone.
I it turn out it is a loose screw on the inside and to get to it you have to undue 11 screw to get to it. I might be able to fix it for you. I dought you would be able to get into this phone and not hurt any of the other functions.
Rick
Hi,
could you advise how you managed to fix it?
Thanks.
button failure and white screen
I have the same problems, if I turn off and on for 3/4 times everything back to normal. But is really annoying because I miss calls.
To me seems a software issue.... I can solve it by turning off the screen does not make sense hardware problems
have a look to this post:
http://forum.xda-developers.com/showthread.php?t=435281
I have still to test the suggestion of schaps advance config version 2.02.1.0.0
Sorry it not a software issue and you can flash a 100 roms and it still won't work. You simply have a bad flex cable and possibly a defective dpad circuit board. You have to crack open the phone to replace it and it has to be carefully done. There are tons of DIY's about opening the phone and replacing the cable. There are even YouTube Videos about it.
hi,
since yesterday, my niki doesn´t response to touchscreen tapping if the slider is opened. i hear a very quiet metallic clicking sound if i open it up... if i try tapping the touchscreen before this little click appears, the touch works... but with slider open completely, it doesn´t. i guess this is hardware specific. i´ve tried a hardreset now, but still doesnt work any advice?
EDIT: i didnt flash any other radio...
EDIT2: sometimes it does work.
Sounds like a ribbon cable has come loose to the touch screen - send it back if it is under warranty, if not, Mike Channon has collected links to the service manuals somewhere on here which should show you how to correctly take it apart, fix it and put it back together again
Cheers,
Smiffy
I had the same problem. In my device it was: cable that goes to touch screen contacted metal on back panel.
I've solve it by finding manual to take my niki apart (http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/ - but it is in russian). I've done everything till 6 point. Then I put my v-card between this cable and metal. Now it's ok
I've got extra service on mine.
6 euro's a month.
handed in the phone today (same issue), and got given an new one! ;D
_Zorro_ said:
I had the same problem. In my device it was: cable that goes to touch screen contacted metal on back panel.
I've solve it by finding manual to take my niki apart (http://www.pdacenter.ru/razborka/razbor_htc_touch_dual/ - but it is in russian). I've done everything till 6 point. Then I put my v-card between this cable and metal. Now it's ok
Click to expand...
Click to collapse
You ROCK! I had this exact same problem happen on my NIKI100 after I put Tom's Niki Project ROM on & immediately blamed it but after flashin back to stock the problem still occured & I was really bummin! I found this thread, tore my NIKI apart to step 6 as you described & I could see the spots on the metal of the inside back of the back cover where the cable was rubbing along with the protective plastic worn off on the cable a little bit so I suspect it was touching the metal & shorting out causing the problem (heck I'm surprised it didn't do some real damage!) so I cut about a 1" length of electrical tape & taped it to the area of the metal that it was rubbing on (I didn't see any legit reason for anything to make contact to that area for a ground so I figured it was OK. I started at the edge & ended just before the gaps where you would be able to see the tape from the other side in the battery cavity) and VOILA! it fixed it! To me it looks like a nasty design flaw on HTC's part but not expecting a recall any time soon. I suspect this fix will out last the phone & hopefully this thread will help others. I am 1/2 tempted to tear apart my NEON to see if the same design exists or if they put a piece of tape in that area.
the_fish said:
hi,
since yesterday, my niki doesn´t response to touchscreen tapping if the slider is opened. i hear a very quiet metallic clicking sound if i open it up... if i try tapping the touchscreen before this little click appears, the touch works... but with slider open completely, it doesn´t. i guess this is hardware specific. i´ve tried a hardreset now, but still doesnt work any advice?
EDIT: i didnt flash any other radio...
EDIT2: sometimes it does work.
Click to expand...
Click to collapse
well i got the same problem as u have/had... But i also need to align my phone like ten times a day, because its always out of alignment... I think i got to get back to the phoneshop to fix(replace) my phone. I do have the touch dual for 6 months now.
PhoenixNLx said:
well i got the same problem as u have/had... But i also need to align my phone like ten times a day, because its always out of alignment... I think i got to get back to the phoneshop to fix(replace) my phone. I do have the touch dual for 6 months now.
Click to expand...
Click to collapse
Hm, same problem here. Thought first that it was an error of the ROM that I used..
Btw: isolated every contat that I could find (nearly ) but no result -> still my touchscreen doesn't work when my slide is open..
EDIT: has anyone PHOTO'S of their disassembly and isolation work? I the problem is different on my device 'cuz the cable hasn't worn off...
Ok,
Now I took my device apart to the last piece, took the display cable apart, taped it in completely and my touchscreen WORKS once again :-D.
Woot! Thumbs up for XDA-developers!
EDIT: Now my touchscreen doesn't work when slide's closed... Any suggestion?
kvstrien said:
Ok,
Now I took my device apart to the last piece, took the display cable apart, taped it in completely and my touchscreen WORKS once again :-D.
Woot! Thumbs up for XDA-developers!
EDIT: Now my touchscreen doesn't work when slide's closed... Any suggestion?
Click to expand...
Click to collapse
ive brought my dual to a vodafone shop and they have fixed my dual. Replaced a part and software update, got windows 6.1 now, legal and my screen is working like a champ!
I have had the same problem with my touch screen except mine stopped working completely, it didn't matter if it was slide out or not. I could get the phone replaced on warranty though.
Just posting so people know this isn't just isolated case.
mine slowly stopped working.. im gonna disassemble later and try this. im glad im not alone
edit: worked a treat. some insulation tape on the metal shielding worked great.
That did't work for me! Can it be something else or is it the flex cable for shure? I'm considering buying a new flex cable on ebay! Will that fix the problem with touchscreen dos'nt work when slide is open?
theres a 99% chance that its the flex cable.. did you check it for any damage? mine had tiny tiny little dots with wire exposed. barely noticable but it was enough. try taping the cable. i dont know. if not, i'd get a new cable for sure.
It's worth a try. I've just bought a new cable. Hopefully it will make my
Dual working again. Now I just have to wait a week for it.
The cable arrived today and my dual now works perfect. Now the question is which phone i'll use, my dual or my new Diamond.. =)
hey, where did you get yours from? and how much did it cost?
i have seen ebay, but they are over 30$US including shipping.
Cheers,
palitu
Klingan said:
The cable arrived today and my dual now works perfect. Now the question is which phone i'll use, my dual or my new Diamond.. =)
Click to expand...
Click to collapse
Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!
cool story bro
when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it
Why does the screen go black?
Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!
Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.
I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.
In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.
I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O
Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.
great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems
I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components
Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -
perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!
Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike
Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.
TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.
DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.
Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!
for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.