I have been trying to locate the service manual for Touch Dual as I have cracked the LCD screen.
The replacement cost including labour is AU$170+ (Australia)
I have found replacement LCD on eBay for about AU$100
Can anyone shed some light on the service manual so I can replace it myself?
Or if you know good repairman in NSW Sydney metro area??
Thank you and much appreciated!
** I think this should be posted under "upgrading etc" - can somebody move it for me please? My apologies...**
http://www.mikechannon.net/page1.html
Mike
hi
i got the service manual as my nike is not sensing my touchs so i presume the digitizer needs replacing ?
can you tell me which pages i need to look at ? i am confused do i need to take out the main pcb board to access the screen on the slider ?
Related
the screen on my p3600 is cracked. should i send it to htc america and get it repaired or should i just buy a replacement screen on ebay and do it myself?
has anyone replaced a screen? is it easy to replace?
does anyone know how much htc will charge me?
any input on this would be greatly appreciated.
thanks
Take a look at this guide by Dimanto,seems pretty good.
thanks
doesnt look that easy plus it doesnt describe how to get the screen out specifically, the guide is meant for the keypad replacement.
hopefully it will be enough, i have a replacement screen coming in the mail
I have just got my replacement digitizer in the mail 2day from Hong Kong and installed it just now, all is working perfectly as new again. I did a hard reset when the touch screen was first playing up, so I have lost all my themes, settings etc but luckily my office docs etc are still intact.
Anyhow, I made a video on how to replace the touch screen, its only quick as I did not go from the disasembly part, as there is already videos and tutorials on this, so I just documented on the actual digitizer replacement, which is actually basic 2-5mins work, but I thought a vid would be good for any noobs needing it in the future.
Once I edit it all up I will post the video here.
If anyone needs help on replacing the digitizer just ask. DON'T be tricked into buying the LCD + Digitizer if you only need the touch screen, as it is very easy to do without the lcd, though some ppl disagree.
Thanks for reading, thread will be updatd with Vid asap.
Hi X86
I have a crack on the upper plastic case, thats prob. why I have dirt showing on screen. In your opinion where is it located and can I clean it ?
It seems as if (if the crack is on the actual original housing, not just a add-on case) that dirt/dust has fallen down inbetween the digitizer and the LCD, so you can see it through the touchscreen right?
This is fairly simple to fix, you will either need to patch up the crack with silicone or something (best from the inside so it does'nt look messy) OR buy yourself a whole nw housing which cost about US15-$20.
Then just pull your elf/in apart and use cotton tips and wipes to thoroughly clean the LCD and insides.
If you need any help, just let me know via PM or here.
?Good Luck!
Thanks
That was my feeling, now I just need courage to take apart the casing (either repair or replace )
Thanks for bringing up this issue in the forum and extending your hand to others.
I appreciate it alot.
Hi x86
I have read the sticky for disassembling the elf. Can you tell me if it's necessary to unscrew anything and remove the rear speaker in order to remove the front panel ?
Edit: I think I found the answer in the next pics, the 4 screws attach to the front panel, right ?
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
bjonmy said:
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
Click to expand...
Click to collapse
That sounds like both a Digitizer and LCD issue.
Red and white strips is caused by the screen, while the phone not sensing your fingers is caused by digitizer.
But you still managed to use something like mymobiler to rescue your stuff right?
Yeah, you're in Malaysia right? In Singapore, to get this items, we have to get it off ebay or dealextreme.com.
But be careful with this, it void warrenty.
If you send it to HTC service centre, it may cost $160> Singapore dollars.
Cheers,
Jeremy
After obtaining a replacement touchscreen for my Touch HD; (no problem, $45 Australian ex Hong Kong) and after much searching, can still not find any reference to replacing the screen only. Can it be done or does one have to dismantle the whole thing as demonstrated in the service manual? It looks as if the touch screen and LCD screen are glued or taped together, but presumably can be separated. Has anyone managed to do this repair? Just need a few more clues as to it's feasibility. My screen is merely cracked due to pressure. All still functioning. This is obviuosly not a unique problem, but the answers are elusive.
heres the service manual, hope be helpful....
enjoy..
http://mikechannon.net/PDF%20Manuals/HTC_Blackstone_Service_Manual.pdf
manual
Thanks for trying but as mentioned, I have the manual and its does not help. The question remains, does anyone actually have experience of replacing the screen?
Himalaya have two different Main Board?
I have two O2 XDA II, first one with broken LCD and the second one with broken LCD's connector. When I try to combining them, I found that the main board is different.
First one have LCD with P/N : 60H00022-03 and the second one have LCD with P/N : 60H00011-00, that's mean the main board series is different also.
I read the manual service, and it said the P/N is : 60H00011-00. Is that true that Himalaya published with two different series?
Please help me...
howdy all,
i just got myself a jade which urgently needs to get its digitizer, outer display, changed...the jerk used a pen which damaged to layer!
now, anybody around who has some experience with this?
ideally also able to point me the way to the right digitizer, ebay stocks quite a number of different ones...
right one?:
http://cgi.ebay.co.uk/HTC-TOUCH-3G-JADE-100-TOUCH-SCREEN-DIGITIZER-LENS-GLASS-/300398105033
any help highly appreciated!
greetz
If your looking for a digitizer the one with the connection ribbon on the top right here is the link. My t3232 Jade phone also broke took me about 3 months to find one and today i found a seller. here is the link better buy it. because he only has 4 left i bought one from him allready
he is an E bay seller his seller name is maxlzf2008
@alsey7
are u sure about that connector needing to be on the top?
there is a seller called world-2-power who seems to be reliable and he displays the bottom connector!
anybody around able to confirm this?!
greetz
lloking at this picture it seems to be at the bottom
Digitizer disassembly
Hello, I saw good informations for disassemby at directfix
GoodLuck
thats cool, thanx!
i did disassemble mine last week and i can confirm that on the orig european t3232 the digitizer cable is at the bottom!
greetz
Hi All
I have acquired an old HD2 (India version 'unlocked') from a cousin. The phone's touch screen is not responding and I believe I would have to get it replaced (or do so myself).
Now to resurrect HD2 I need an LCD + touch screen digitiser (the screen is cracked at the bottom n I can even see bit of the chip inside). Hence the following questions:
1. Does anyone know if the Indian version has a socket type or solder type of LCD + digitizer panel?
2. Anywhere I can get an OEM version of the panel? (preferably in India or at the least delivered in India)
3. What will it cost me if I go to the service center to get it replaced if anyone has an expericene with service center in Delhi (I would be going to a service center in New Delhi)
There is a slight chance that I might need to get the buttons ribbon replaced as well. I would not be keen on spending too much.
Any input is appreciated. (Just in case this thread should be in another section or if the question has been asked before, I apologise in advance. The MODs can move it to the appropriate location.)
sahilarora911 said:
Hi All
I have acquired an old HD2 (India version 'unlocked') from a cousin. The phone's touch screen is not responding and I believe I would have to get it replaced (or do so myself).
Now to resurrect HD2 I need an LCD + touch screen digitiser (the screen is cracked at the bottom n I can even see bit of the chip inside). Hence the following questions:
1. Does anyone know if the Indian version has a socket type or solder type of LCD + digitizer panel?
2. Anywhere I can get an OEM version of the panel? (preferably in India or at the least delivered in India)
3. What will it cost me if I go to the service center to get it replaced if anyone has an expericene with service center in Delhi (I would be going to a service center in New Delhi)
There is a slight chance that I might need to get the buttons ribbon replaced as well. I would not be keen on spending too much.
Any input is appreciated. (Just in case this thread should be in another section or if the question has been asked before, I apologise in advance. The MODs can move it to the appropriate location.)
Click to expand...
Click to collapse
AFAIK there are only 3 types of HD2:
- EU/International
- TMOUS
- Telstra
I don't really know what the last one is, but you can tell the EU and TMOUS apart easily. If the phone has a T-Mobile branding at the top and has green and red call and end call buttons then it's TMOUS. Otherwise the likelihood is that it's an EU/International (no T-Mobile logo and white buttons). Figure out which yours is and then find a guide to take apart and replace the screen of that particular model.
Thanks!! It has white buttons n no T-mobile branding (T-mobile is not there in India). So I suppose it is the international version.
I believe the International variant has a solder type of connection. Am I correct?
Now only if some Indian folks can guide me where to find the parts (which can be shipped to India, don't want to end up spending too much) or some feedback on the service centers in India.
Edit: How much would it cost getting this done in UK? I'm gonna be in UK at this month's end.
sahilarora911 said:
Thanks!! It has white buttons n no T-mobile branding (T-mobile is not there in India). So I suppose it is the international version.
I believe the International variant has a solder type of connection. Am I correct?
Now only if some Indian folks can guide me where to find the parts (which can be shipped to India, don't want to end up spending too much) or some feedback on the service centers in India.
Edit: How much would it cost getting this done in UK? I'm gonna be in UK at this month's end.
Click to expand...
Click to collapse
As far as you need a combo(lcd+touchscreen), it doesn't matter what type, any model for hd2 can be mounted on.
Finding it on ebay could be the cheapest choice, most of suppliers deliver worldwide.
Be careful if buying from ebay as quality of parts vary drastically ...
full lcd & digitizers as a matching pair will cross fit to any HD2.
You can see the digitizer type in original bootloader screen details:
"MicroP (Touch) 0x30" you have inside your Phone a "60H00295" *solder
"MicroP (Touch) 0x50" you have inside your Phone a "60H00300" *connector