can anyone help me to turn on delivery report while I'm sending the text message. Because my o2 mini xda ii PM10A ROM1.11.00 wwe doesnt have its option. FYI, I never do upgrade ROM since I bought it
Create DWORD value called SMSDeliveryNotify in HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings\ with the hex value 1.
Sometimes you must soft-reset to take effect, but on my S110 wordked immediately after I closed the regedit
Yess its works
Thanks... its works.... no need to soft reset.
Sorry to ask the question like this.
I'm a newbie of PPC... I used to use only Palm5.21 in my Treo600
I just already know that this PPC have registry like windows..
Thank you...
Related
I find this on this forum under Blue Angel
This may help I was looking for this for a Longggggggg time
with a registry tool :
create a DWORD value called SMSDeliveryNotify in HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings with the value 1
in my case it work great
Thank you...... Thank you......... Thank you.....
I have been looking for a way to do this from day one over 3years ago.
I have tried it on my XDA2 and it works. 8)
It's wonderful very very very a big thank , it's OK on my SPV M1000 , i try on
my Qtek S100
perfect perfect.. works great
good job 8)
I didnt tried this trick yet.
But if it really works, Microsoft should feel ashame about that, because they never published such an important feature.
bruxelles5 for president!
please explain
Just before I load this I need confirmation... this is to have SMS notification while in sleep mode yes?? if not what does this do??
Thanks
Re: please explain
Anonymous said:
Just before I load this I need confirmation... this is to have SMS notification while in sleep mode yes?? if not what does this do??
Thanks
Click to expand...
Click to collapse
You just get a notification when your sms is delivered to the receipient...
HTH
Stefan
it sends you a confirmation SMS when your SMS has been consigned on receiver device (if he's out of coverage or with the device turned off you will not receiive the confirmation until the receiver is became reachable).
tested on Imate JAM, works perfectly.
imate jam already has this built in? check the options out when creating a new message it will have a tick box saying: Request message delivery notification
@gazzaman: yes, but you have to check it every time. This defaults it as checked.
ah cool cheers didnt know that
i wonder to know how to read SMS from SIM card?
anyone knows?
No SMS Beep when PPC phone asleep
Hi,
If I recieve an SMS when my phone is asleep I dont get any sound notifying me of the SMS.. is there a reg edit for this??
Great !
Works on the MDA compact !
Re: No SMS Beep when PPC phone asleep
Anonymous said:
Hi,
If I recieve an SMS when my phone is asleep I dont get any sound notifying me of the SMS.. is there a reg edit for this??
Click to expand...
Click to collapse
you can do it using Jeyo Mobile Compagnion orJeyo Outlook Extender
THANK YOU THANK YOU THANK YOU.
It was driving me crazy to select it everytime. And I kept forgetting it most of the time. Thank you sooooo much for this.
Thank you! Works fine for me!
O2 Delivery reports
I don't get delivery reports with O2; I've read about a code that you need to enter before the message but is there any other way to activate it - who watched watchdog tonight o2 got a slatting :-(
O2 Sms delivery reports
To force an SMS delivery report on the O2 UK GSM network prefix the SMS message with *0# followed by the message. Example *0#Hello......
Incidentally, there are codes which can force an SMS message to screen, etc. but it is so long since I used them I have forgotten - anybody remember?
If you use that code to get a delivery report on O2 tho, if the receiever chooses to reply to your SMS, they will not be able to send the message. Not sure why this is, but I had this problem and after a little googling discovered that it's a problem with the way that O2 implements delivery reports!
Why oh why can't O2 just do it the standard way?!? Then we could just use the delivery report check box as well instead of having to type a code!!!
Hi,
I have a t-mobile mda (touch dual) but have it unlocked with an O2 sim in. Every time I send a text or make a call I get this annoying pay and go balance sent to my phone. Is there any way I can stop the notification or atleast prevent it from making a noise? I have tried turning of all sounds but it doesnt work .
Thanks in advance for any help
you could try search for an O2 named .exe file in \Windows\ or a .lnk in \Windows\Start Up\ and delete (or rename to be safe) them.
but you could also Hard-Reset your device (Hold both call/hangup buttons while device on and press reset with stylus).
or even HardSPL your device and install a clean ROM
NOTE: Use PIM Backup before Hard Reset/ROM change, to save all your sms, email, contacts, etc. !!!
hi
thanks for the quick reply. I want to install niki project rom v2 but apparently it still has a few bugs that need to be ironed out. Do you knoow how I can hard reset? Im a bit of a newbie with the nike - just trying it out before I properly switch from my ancient tornado loll.
Also I know this is kind of off topic but is it just me or is the internet slower on the nike? Could it just be my radio rom?
Thanks again!
This is something that happens on all o2 pay as you go sims, its not the phone.
hi,
thanks for the reply
I know its an o2 thing but is there any way to stop the phone from alerting with a noise everytime I get one - I have tried going through all the notification settings and it still happens if I turn all notifications off - so I end up with no alert for calls / texts but an alert for credit! lol
i'd like to know this too, its pretty annoying!
I cant seem to find anyway to change it :s. On my tornado and prophet the message shows up doesnt make any noise but I cant find options for disabled that tone in the nike rom :s
i found this post that gets rid of the noise, ive yet to try it though
First download totalcmd (another file browser)
Create a blank wav file.. call it notify.wav (sometimes notify.wma)
Use totalcmd to replace the one in the windows directory with the one you created..
It works with some versions of wm5 though, so good luck..
Click to expand...
Click to collapse
doesnt work, tried that a year ago!
My advice would be to move to a different PAYG provider - T-Mob or Three would be my first choices Get a PAC code, take your number elsewhere
Failing that, ask O2 if they can switch it off?
Cheers,
Smiffy.
jaymit said:
Hi,
I have a t-mobile mda (touch dual) but have it unlocked with an O2 sim in. Every time I send a text or make a call I get this annoying pay and go balance sent to my phone. Is there any way I can stop the notification or atleast prevent it from making a noise? I have tried turning of all sounds but it doesnt work .
Thanks in advance for any help
Click to expand...
Click to collapse
O2 have that as a feature phone them up and tell them you dont ant notifications
This is def the notify.wav. We can never get rid of the message from o2 as that is a network feature as previously mentioned.
Replace notify.wav with a blank wav sound. This will make it less annoying.
thread closed after request by thread starter.
My original german o2 branded ROM used to pop up a window to confirm that an sms text message was sent. I flashed a non-branded german stock ROM and now the phone does not give me any confirmation after I send a message.
I tried searching the forum because I could have sworn I read about this a few weeks ago, but I can't find anything.
I would rather avoid installing tweaking programs because I had problems with them (HD Tweak as well as AutoConfig) in the past.
Is there a registry entry I can change?
EDIT: For solution, see posts 4 and 5.
Messaging/Menu/Optionen/SMS\MMS/Übermittlung von Nachrichten bestätigen on my German HD with HTC stock ROM
Lucas0511 said:
Messaging/Menu/Optionen/SMS\MMS/Übermittlung von Nachrichten bestätigen on my German HD with HTC stock ROM
Click to expand...
Click to collapse
Thank you, but that is still different. With your suggestion I actually end up receiving an sms from "system administrator" saying that my message was sent. BUT that is a bit annoying because it ends up being a new sms message in my inbox that I then have to delete every time.
In my o2 ROM, I had that option turned off, and the phone always popped up a little message window that said "sms was sent". It would hide automatically, and I never had to erase anything from my inbox.
sms sent...
I think this is what you are looking for....
looby said:
I think this is what you are looking for....
Click to expand...
Click to collapse
Thank you!!! Yes, that was it!
I did not install your cab, but I looked inside it and found the registry key needed.
HKLM\Software\Microsoft\Inbox\Settings
Change "SMSNoSentMsg" value to 0 in order to get the confirmation!
I'm sure installing the cab, would have done the job, but I was still curious about what registry key it was.
Thanks again.
there's an option it hdtweak as well (it does the same registry work)
schap's advanced config can also turn this on/off
Huhu,
look here for answer:
http://forum.xda-developers.com/showthread.php?t=467052
MfG Rayzer HD
I have just upgraded from Touch Diamond 2 and wow what a phone!!
I see this phone now supports group text by ticking who you want when you add recipient but it's limited to 10 contacts is there any way to lift this limit?
Dan
I remembered there was a registry edit that did this but a search resulted in nothing. Anyone?
anyone?? help please
I hve found this but it wont work
jective
--------------------------------------------------------------------------------
Increase the 10 recipient per text limit on the Samsung Omnia.
Applicable Device(s)
--------------------------------------------------------------------------------
Samsung Omnia
What you need
--------------------------------------------------------------------------------
Registry editor (i.e. PHM Editor)
Registry Address
--------------------------------------------------------------------------------
HKEY_LOCAL_MACHINE\System\Inbox\Settings
Value Name(s)
--------------------------------------------------------------------------------
Value Name: LimitSMSRecipients
Note: Add the string value if it’s not available.
Value Data
--------------------------------------------------------------------------------
Enter the value: 4294967295
Link to site: http://www.careace.net/2009/10/02/how-to-enable-mass-texting-with-registry-edit/
Anyone got a fix for this? I came across this limitation last night
hotrodbx said:
Anyone got a fix for this? I came across this limitation last night
Click to expand...
Click to collapse
I could do with getting rid of this limit too. Thanks.
Think i may have found something here
http://forum.xda-developers.com/showpost.php?p=5192853&postcount=735
For increasing the number of allowed recipients in group sms through default HTC SMS
Go to registry,
HKLM\Software\Jataayu\Messaging\MaxRecipients
Change from 10 to 50
Fine, work !
Tnx man
thanks alot it works for me 22222222222
Use BSB Tweeks.......the 1st MUST have!!
Use Cookie Home Tab mod with the CHT Editor.......the 2nd Must have!!!
Using both of these you'll find that most of your annoyances with your new HD2 phone will be resolved and both will provide you with functionality that you could of only dreamed of..
Have fun
I have the problem to send group sms to many recipients. Currently I have to add all one by one but Can I make groups to forward text directly. I am using group SMS but that is not as good as I have this functionality with TPC's ROM in Kaiser. I am missing this in HD2. I search on xda & on google but unable to find any solution yet. Please help.
Dears,
How can i know my sent SMS status on my HTC Diamond 2 mobile??
(Sent - Received,...)
is there anyway to know that?
When writing the SMS, go to options- there is the option for a delivery report.
Sorry to hijack this post.
But I have just updated my phone with the official windows mobile 6.5 from the HTC website. For some reason I now can not set the LED to stay on until I have read the message like I used to be able to. The tick box is greyed out. Does anyone know a way around this?
SQueal. there is a regedit to fix this. get a regeditor,if you dont already have one and navigate to HKCU\Controlpanel\Notifications and find entry A877D65B…
change AvailableOptions value to 15.
hello. I have tcm and as I understand, i can edit the registry. Where do i find it? Thanks for your time
codhunter said:
SQueal. there is a regedit to fix this. get a regeditor,if you dont already have one and navigate to HKCU\Controlpanel\Notifications and find entry A877D65B…
change AvailableOptions value to 15.
Click to expand...
Click to collapse
Thanks codhunter, is there a registry editor on the phone, or can I access it through a PC one when its hooked up via active sync?
While I am in there, is it also possible to change the text message alert to something I want, I notice that they have removed this on the updates as well which is quite irritating.