i need the headphone/mic jack on the k-jam/wizard main board as mine is damaged.
i also need the volume control switch as i broke mine
does anyone know where i can get them or if there is any other model that uses similar parts i could use
There are two ways:
1.Buy a bricked wizard and use its parts.
2.Maybe you can get Main Board parts from Texas Instruments Website for free as a sample. Buti dont know if they are available there just check out.
I hope i helped. TC
i am havign trouble findeing it on their site could you please help me out with geting a free sample?
where do i start? do i contact them and ask them for a sample or is it an option somwehre on their site??
thanks !
Here is how to get a sample:
1. Open http://www.ti.com/
2. (On right side under SAMPLE & BUY) Click on "GET SAMPLES"
3. If you know the part no. enter it
ELSE
3a. (On left side below search text box) Click on "ADVANCED SEARCH"
4. In search for column just right the parts name and click go at the bottom of the form.
5. Result will be shown see if you can find it there or else SORRY!! IT MAY NOT BE AVAILABLE.
I tried a search but sorry it was not there, maybe my search phrase was not right you should try yourself too. TC
Related
Attached is an early alpha version of D9, a replacement for the built-in dialler. The main features are:
* Predictive text contact lookup
* Fast
* Big (thumb-friendly) buttons
* Free
Source code, a website and various other bits and pieces will be arriving in due course. In the meantime, however, please do feel free to try it out and give it a go.
I'm looking for feedback, so please let me know what you think!
I think it's a very good start. The application, as you said, takes 2-3 seconds to start the first time, but it's not a big problem. It is very quick for finding contacts. Buttons are big enough and the use of vibra very useful.
Here is some features that could be useful in my point of view:
- Possibility to have contacts sorted by the Outlook field 'View as' (or 'Save as' or 'Fill as'. Don't know what MS translated into 'Classer sous').
- Or if not possible, sorting (finding) contacts by company, name and firstname.
- Clear the previous search automatically when the application comes to the foreground.
- Option to switch to internal dialer once the contact has been dialed.
- Highlight the found string in the contact name (this is nice to have more than really useful).
Hope it helps. I look forward to next version.
Thanks for the great suggestions. I'll see what I can do!
Hi Mike,
I was looking for something with a big "exit" button like this one, so I did a try to it.
Unfortunely my XDA II gives me an error every time I tap the screen when the program and library was installed on SD card.
When installed on main memory it was fine making calls but when I got an incoming call the built-in dialler was the one coming up to the screen.
The main problem for me is that I don't want to play with the penn while driving after I got a call to close the dialler screen and I need it closed to see the TomTom Navigator.
Mostly of you drive a car, I do a motorbike, so it's not very funny to try to hit the small "X" with a small penn and big gloves.
I will look for a new version.
Jose Adell
Unfortunely my XDA II gives me an error every time I tap the screen when the program and library was installed on SD card.
Click to expand...
Click to collapse
Hi Jose,
Sorry, I don't have an XDA II myself - I've only tested on my JAM. Could you tell me what the error message is?
Hi Mike
Mike Wagstaff said:
Unfortunely my XDA II gives me an error every time I tap the screen when the program and library was installed on SD card.
Click to expand...
Click to collapse
Hi Jose,
Sorry, I don't have an XDA II myself - I've only tested on my JAM. Could you tell me what the error message is?
Click to expand...
Click to collapse
I will do tomorrow as I need to install it again on the SD card, but I think you don't need worry too much about it. It's typical to get some errors, like libraries (dll, ocx...) are not installed when it's done on SD cards.
But the main problem for me still remains, to get the incoming calls through your program. Currently is the buil-in the one comes up.
See you tomorrow,
Jose
Hi Mike
I did install again your program on the SD card and this is the error I get as far I tap the screen:
I suppose you don't understand Spanish so I'll do a translation:
"Unexpected error in D9.exe. Tap Salir (Exit) and reinitialize the program or tap Detalles (Details) to get more information".
If you tap Details then a new similar screen comes up and says:
"D9.exe
TypeLoadException"
As I said in my former message, all this doesn't happen if the program is installed in the Default folder.
Hope it helps.
Jose Adell
Hi Mike,
installed your program with no problems at all.
I have a Qtek 2020 with 1.72 WWE installed.
Works OK and finds the contacts correctly, by first or by last name.
It is a simple, thus easy to use and load program.
The only thing to point out is that I would prefer a slightly larger font on the number and name display, making it more 'readable' when on the move, e.g. car, where I will be more likelly to use it.
regards,
george
Hi Mike,
I have been waiting for an update to your great program. Is it possible that it could be mapped to the Send/End keys? Maybe you and Maimaich could get together on this?
I also agree with the previous posts to enlarge the contact name font. And I miss the speed dial option from your previous version (which does work on WM2003). Keep up the good work.
Feature wanted
It would be nice if I could navigate the buttons on the screen using the D-pad. With this, I can then write sms without the need to press on the screen and leave my messy fingerprints on it. :lol:
Mike Wagstaff said:
Attached is an early alpha version of D9, a replacement for the built-in dialler.
[skipped]
I'm looking for feedback, so please let me know what you think!
Click to expand...
Click to collapse
Thank you for your job. It looks much better on my MDA Compact. I even think about using it in replacement of the built-in dialer would it dial DTMF tones in the line. This is the worst thing that stops me from using it :-(
As minor features I'd like to see more large and contrast phone number, no vibra but sound when touching screen buttons, ability to map this program to the MDA's buttons on-hook and off-hook. Also I guess this is not a good idea to press "Clear" to start the new history for the phone number.
Sorry for the mostly negative commens - I wish the program become a real replacement for the standard dialer.
Yes great app, but the lack of tones doesn't make it easy to manage the message box on the Orange answering machine.
international characters
i'm going to try this new version. i have done simple app for previous version of D9 that converts all international chars (codepage cp1250) to ascii and change order of firstname and lastname to lastname firstname. there is source code avalable so i can add this feature if not avail and i'll share it. i like so much previous version and i'll see this one tomorrow. i'm looking forward.
very nice tool ! I use it all the time now ! keep up the good work :lol:
Glad you like it!
I've made a webpage for D9, and also have posted up a version of the source code (it's actually slightly newer than the current binary, so think of it as a work in progress). The site can be found here:
http://www.pocketgamer.org/d9/
You can download the source code directly from here:
http://www.pocketgamer.org/d9/source.zip
Please feel free to use / adapt / improve the code as you wish! Note that I've used two external components, Poom .NET (for contacts operations) and OpenNET CF (dialling, vibrate functionality).
Any thoughts on adding the tones for voice mail operation ?
I'd love to! Does anyone know of any example code for generating the tones...?
The tones are called DTMF-tones:
A list with the frequencies can be found here:
http://www.zytrax.com/tech/telephony/dtmf_tones.htm
Made a new skin for D9 dialer
I Just made 1 skin for D9 dialer, in 2 variations, (look at dial and clear buttons).
Unzip to D9 directory, overwrite - yes.
hey cool app but how do i use the hax one on the right with the SMS,
ive been after a SMS app that did full screen vertical typing for a while.
will this one do it ?
I have found that whilst using my trinity for ebay that the whole page loads up as it should but I am not able to make a bid. Where it say's place bid if I press it then nothing happens. Has anyone else come across this before?
I do have shayed navigation installed. Would this effect it?
Any info would be appreciated.
it's the same on mine. I've always thought it was Internet Explorer bug.
A few other things don't work either, like some drop-down menus (when you have to choose from the list of ie countries), a few pages don't load at all.
Just like ie did not support something, but I don't kn
Edit: what is "shayed navigation"?
See this link http://forum.xda-developers.com/showthread.php?t=319455 my mistake it is actually written by Shayd!
O3Touch, new version 3.41, released 15- February-2009
Improved keyboard
Full support for contact information
Faster search
More
Thanks the friends for translating the application
http://www.O3Touch.com
Arie
for one of the first users of this EXCELENT dialpad (and lot more), I can say just one word...
WOOOOWWW
Thanks.
ArieBK (PocketPcFreak / Freak Forum)
Most recommended software.
Appreciation for a job well done.
The best APP
The most FFS (Fast, Functuality and Stable) application I have ever work with!
Really recomand it!
Haha, that's great!
Everyone who have a phone with Windows Mobile OS, should have a copy of this great app.
This is one useful app, thanks! Clean and fast..
The way things are going, it has great potential to be one of the "must have"s..
A definate "must have..."
Smooth & straight forward!
THANKs
.
Version 3.41 is PERFECT !!
How did we manage without it until today ?
Great app (works well on the IPAQ 600) but when will it have support in landscape mod? (like IPAQ 900 )
EREZYAD said:
Great app (works well on the IPAQ 600) but when will it have support in landscape mod? (like IPAQ 900 )
Click to expand...
Click to collapse
Hi EREZYAD, thanks
Landscape support will be part of next version.
Probably the first app, anyone should install for his WM. Once you get used to it, you can't live without it.
great job!
ArieHa said:
Hi EREZYAD, thanks
Landscape support will be part of next version.
Click to expand...
Click to collapse
don't 4get to update when it will support ..
thanks
EREZYAD
need a bit help
I've been searching for quite some time for the program for searching contact and handling its information, (I have over 1200 contacts), and then yesterday I found O3Touch. Though I'm still only at the start stages, I find that searching is extremely fast and resembles nothing I've seen before. What I am still having trouble understanding from the manual, is how to find a contact by its company name?
Sigal Cohen said:
I've been searching for quite some time for the program for searching contact and handling its information, (I have over 1200 contacts), and then yesterday I found O3Touch. Though I'm still only at the start stages, I find that searching is extremely fast and resembles nothing I've seen before. What I am still having trouble understanding from the manual, is how to find a contact by its company name?
Click to expand...
Click to collapse
Hi Sigal
First go to settings page 1, press Search mode button until you get "Search mode contain " then close settings. Now type the name of the company and you'll see the first 4 contacts of the same company, if you have more than 4 press on what you typed on the top and you'll get all.
Greetings
@ Arie
AMAZING WORK !!! Thank you and Keep going!
Sigal Cohen said:
...how to find a contact by its company name?
Click to expand...
Click to collapse
Searching the company name filed is active in the “contain…” search mode. Switch to “contain…” mode by touching the right side of the top line.
ArieHa said:
Searching the company name filed is active in the “contain…” search mode. Switch to “contain…” mode by touching the right side of the top line.
Click to expand...
Click to collapse
We answered together , get some sleep, you are working too hard
Tito
How to Search for Company Name
Sigal Cohen said:
I've been searching for quite some time for the program for searching contact and handling its information, (I have over 1200 contacts), and then yesterday I found O3Touch. Though I'm still only at the start stages, I find that searching is extremely fast and resembles nothing I've seen before. What I am still having trouble understanding from the manual, is how to find a contact by its company name?
Click to expand...
Click to collapse
Hi Sigal and welcome,
As a person that use this wonderful dialer (and much more ), for quiet a lot of time, I can tell you that you won't replace this app with any other dialer. In just 3-4 days you will be at the end of the learning stage, just use it (you don't have any other choices )
As for your question - Just search regularly as you search for names, but be sure that you are in CONTAIN mode, otherwise it will only search in name/family.
(I will explain as a TOUCH PHONE user not SMARTPHONE)
This is done in 2 ways :
1. Settings page 1/8 line 4 (touch logo button and goto Settings)
2. Start searching and touch to the right of the search string where is say "Start with", and it will change to CONTAIN, and from now will search in this mode.
If it finds more then 4 results, just touch the SEARCH STRING to list all the results.
And... if you would like to be updated in Hebrew and see whats new, goto the Freak forum at:
http://www.pocketpcfreak.com/cgi-bin/yabb/YaBB.cgi?board=Himalaya;action=display;num=1233437360
Enjoy!
I can say that the three of us should go to sleep now
That's what I am going to do now.
Good night everyone....
many thanx
to all who posted replies to my question; very helpful
I remember reading about some sort of program, script or setting to change to enable this:
From the home screen, start typing the name of a contact and/or the name of an application or program, and you'll be able to launch the program or call/txt the contact.
Yes, I'm aware that starting to type the name of the contact while on the home screen will search through the contacts and enable you to find your contact and place a call...
The difference with this script or program being it adds additional searching/functionality to also include being able to launch programs as well just the contacts.
I cannot remember where I read about this (possibly on another blog, in the signature of someone here on XDA, on Cyrket, as an added feature of one of the cooked ROMS, etc).
If anyone knows of the name of the program, the GScript, or whatever it could possibly be, I sure would appreciate your help. I know it's available (edit: maybe not, see post below), I just don't know what it is or where to find it.
Thanks.
Isn't this supposed to be a feature of Android 2.0?
Maybe that's what I read about.
No amount of searching the Market or Cyrket or anywhere else has turned up any results, so I bet that's it.
Look for "moov" in market. Sounds like what your looking for.
dumfuq said:
Look for "moov" in market. Sounds like what your looking for.
Click to expand...
Click to collapse
MOOV !
Whew. That's it.
I knew I had read about it.
Got it. It's a little flaky, but it does the trick.
THANX !
Hi guys i have a iconia a500 that's been dropped and the touch isn't working anymore. the screen is in perfect nick but it looks like the touch chip that attaches to the touch part of the screen has copped abit of damage. i was wondering if anyone knows where i can get the part from.
the part is: Atmel mXT1386 touchscreen controller
(image grabbed from: http://www.techrepublic.com/photos/...41&tag=thumbnail-view-selector;get-photo-roto)
hope you guys can help
@Maximus Rockstar - Go to the attached link > at top of page to Right there is option "Buy">click on that and you will have a chance to select your country (Australia?) then you will get a list with phone numbers of "part suppliers"
http://www.atmel.com/dyn/products/product_card.asp?part_id=4803
metpolds said:
@Maximus Rockstar - Go to the attached link > at top of page to Right there is option "Buy">click on that and you will have a chance to select your country (Australia?) then you will get a list with phone numbers of "part suppliers"
http://www.atmel.com/dyn/products/product_card.asp?part_id=4803
Click to expand...
Click to collapse
Thanx mate.