There is no way that I can make my computer to connect my artemis.
Anyone has any idea?
I have upgrade wmdc to the last version but still won't recognize the device.
I'm running Vista and I have reinstalled the factory rom under the bootloader.
Anyone please?
Related
I have searched for the last hour and can't find a solution. I have an I-mate K-Jam purchased new in October 2005, have never upgraded the ROM, BIOS, or anything on it. I am trying to get it be recognized with Activesync so that I can update the BIOS as described in this forum. Here is what I have tried so far:
Uninstalled Activesync and reinstalled 4.5
Tried on a seperate computer
Stopped all Firewall services
Hard reset the k-jam
Tried different USB cable
Tested USB port and Cable with another device and they work fine
Is there any other way to update the BIOS without using Activesync?
Someone please help me.
Thanks.
Anyone have any ideas?
i tryed to change os language from italian to english and i put my hp6915 in bootloader mode by copying and executing EnterBl.exe from my device... hard reset says "clearing ok", but the device rests in bootloader mode... i need italian rom in order to reflash the damned thing... of course, a method to bypass language check from english hpruu would be better, but i'd be happy to restore sw... please i need a solution asap... thank you...
i have similar problem MY iPAQ hw6915 is now in bootloader mode i need some firmware to update i cant find anywere, somebody can help?
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
@pjurczy
thanx a lot your solutin work whit my hp hw6915
thanx thnax thanx
juliog said:
this solution is only for UNIVERSAL, not for SABLE, DONT WORK
Click to expand...
Click to collapse
today i try and 100% work
I'm glad it worked
Pawel
you are the best!!!
pjurczy said:
Hi,
There is a tool which should help! It worked for me. It's called UNI_ExitBootloader
(ftp://xda:[email protected]/Universal/Tools_and_Programs/uni_exitbootloader.zip)
1. download the tool
2. disconnect USB cable from your device
3. disable USB connection in ActiveSync
4. reconnect USB cable
5. wait some 30 seconds
6. run the tool
7. If successful, device will boot itself.
Pawel
Click to expand...
Click to collapse
Yuo are the best!!!
worked for me Thanks!!
Super duper!
Been having sleepless nights. Thanks a lot for your solution. Worked like a charm!
Dam not work with win7 64bit, you have another solution?
Doesn't work in vista or 7
How to disable ActiveSync?
When I connect my HP to PC it recognizes as "HP USB Sync".
I tried to disable that thing in Device Manager, but still getting error from "uni_exitbootloader" program (cannot open usb port... and so on)
What can I do? Please, urgently need advice!
P.S. I firstly tried to update it's rom to english, with sable ruu, got error something like "fail to initialize"; and then my hw6915 stuck in the bootloader screen. tried hard reset, but after "clear ok" it just got back to that HP screen.......
EDIT --> I have just found out that these all methods doesn't work with Windows Vista or Windows 7, so I'm going to get to my brother's computer with XP soon to try another time
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
try to check at http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14
Hakim Rahman said:
So every time you do the flash rom will have to borrow your brother's computer ??
why do not you use WMDC 6.1 for Windows Vista that also supports and works in Windows 7 ??
Click to expand...
Click to collapse
This one for WM 6.1, what could i do with it? hw6915 is WM 5.1.
Another cool thing, that i have just flashed it with uk rom successfully, with xp.
btw, the computer with xp is half-mine not only brother's.
Any solutions? my computer will recognize at first but then it says not connected and wont let me acess the files on my wing. Im using Windows Vista btw.
Can somebody help me with this problem?
I am using vista also.. try soft reseting it.
I tried soft resetting it and hard resetting it and it still doesn't work. Now I'm contemplating ever getting Touch It 2.3
Try going in settings->connections->usb to pc and either check it if its not checked or uncheck it if it is checked
Mine did this too last week. Reflash your phone with the official Tmobile RUU posted in the forum.
My steps were:
-Go into bootloader mannually (camera button plus voice command button and finally with those two press, click in the hole (between memory and volume key) with your styles)
-After it seems that pc loaded up some kind of driver, double click on the official Tmobile RUU and flash your phone to stock form.
this should work and goodluck...
I've connected my Wing on my friend's computer and it's recognized by his ActiveSync but its Windows XP he's using. Is there any way i can reinstall or change some settings on my computer so that it can recognize my Wing again? I really prefer the windows xp activesync over the windows vista version but theres no way of getting the old activesync on vista.
Finally!! I fixed the problem! I had to install version 6.1 from microsoft's website, and everything is good now. thanks for the help everybody.
do you have the link to that update im having the same problem
nm i got it, thanks for the solution though
Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
OCRAM00 said:
Hi, just bought a qtek 2020i, i am trying to upgrade it to wm6.1 but no mather rom i use, it always get me error 112 witch says ce erase error in log file.
after searching and searching i only find one guy that solved this problem using a computer with windows me and activesync 3.7 without antivirus or firewall.
my quetion is:
to upgrade a 2020i's rom, activesync has to connect to pda in bootloader mode?
Click to expand...
Click to collapse
First off, update your Activesync to 4.5. Activesync shouldn't "connect" when in bootloader mode, however you can flash ROMs if you're device is connected in bootloader mode. You can also run the RUU after installing the modified SPLs needed.
Ignoring the first issue of connection, you can't actually achieve your stated aim of upgrading an Alpine to WM6 anyway, no such ROM exists.
hi, i've found and download a rom of wm6.1 to alpine 2020i and also a wm6.5.
I've tried with the activesync 4.5 and still the same error, i dont understand why it wont erase the rom to install new one
i like to see this rom give mi link or info wher to find it. i well try to instal yt on my xda IIi
be2nzs
hi guys, i have problem to upgrade my alphine, i just want wm 6.5 runing on my device, can anybody help me ? i am sorry for my english.
Hi I am running Open Touch 7.7 by ttran on my t-mobile wing.
Unfortunately, whenever I connect the phone to my PC via usb all I hear is a the usb connection sound twice and the device is not picked up at all(I cannot access it in My Computer).
I have tried multiple usb cables and used a computer running Windows XP and a computer running Windows 7 (beta). My phone used to connect just fine, which is how i got open touch onto it, but now i can't seem to get it connect to my PC at all. I tried hard-resetting my phone but it did not help.
Any suggestions on how to fix this problem?
reflash
I had the same problem too with this ROM. The only way I could get a connection again was to reflash the ROM. This happened a couple times before I gave up on it and installed a pdaviet rom. Now, I'm currently using (16.03.09) - Herald 6.1 Rom -5.2.20757.1400 which is running very well.
Good luck.
try logging off or restarting computer. For some reason if I can't connect with this rom, that works every time
hey i know how to flash a ROM with my sd card (thanks to ivan's guide) but i dont know how to Hard Spl without pc connection which is needed to flash a rom with a micro sd!
EDIT!: I got my device to connect to the pc. I simply went to Settings-->System--->USB to PC and enabled it. Then when I connected my device i had to run some drivers searches through windows and finally it recognized my wing as a winmo 6.1 device.