Related
Hello all,
I'm aware that this might be better placed in the thread announcing the FW release itself, but there seems to be turning into wailing wall where ppl who raise issues but they're left unanswered (I asked the same questions there but in vain).
The issues / questions I have with wrt that realease
1) Serious issue: 3G data connection.
No matter what settings the phone does initiate a data connection -- I enabled "Use packet data", enabled "Data Roaming" (even if I'm in my home netw) and even set the network mode to "WCDMA only", but all to no avail: There is no 3G icon close to the signal strength bars in notification area and the the "Mobile Network State" in the Status is reported as "Disconnected" and the phone cannot connect to the data network
Everything worked perfectly fine in JM release.
2) The one click lag fix does not work on XXJPH
The one click lag fix linked from the first post in the release thread (namely this lag fix: http://forum.xda-developers.com/showthread.php?p=8223512) is, as per version 1.6.7 (which seems to be the last one) not relevant for XXJPH, but there are references to a "release 2" of the said fix. However, I cannot locate that .... Am I missing smth here ?
3) Input language selection.
There is a very limited set of input languages that can be selected. In particular, there is no choice for scandinavian languages (swedish / norwegian / danish). Can that be added ?
TIA for the feedback.
Florian
1) Have you set a valid APN in mobile connections?
2) I don't use a lagfix in JPH, its running very smooth and fast for me
3) no idea
I'm currently using 3G data and OCLF on my JPH.
Did you wipe your data/cache?
First and foremost, thanks for the quick input.
1) Yes, I did a data wipe / factory reset after flashing -- since that was what the FW instruction said (and it felt better that way)
2) Maybe this info is buried somewhere deep in the FW thread and I've missed it, but I haven't seen any instructions that I need to define an APN "manually" -- it all "just worked" in JM / JM1 without that.
Anyway, after you pointed that out I defined a new APN (took me a while to find how and what to set in there...) but now I got a 3G connection.
So many thanks for that.
The question on how to add additional input languages still stands.
Thanks again for the help.
What CSC file did you use?
Because I think the APN Settings are coming from the CSC, not the Firmware itself (PDA File).
FlorianO said:
3) Input language selection.
There is a very limited set of input languages that can be selected. In particular, there is no choice for scandinavian languages (swedish / norwegian / danish). Can that be added ?
Click to expand...
Click to collapse
Why do people always forget that Finland (and also Iceland) are a part of Scandinavia? Anyway good to know this.
What about bluetooth? I read in the other thread it doesn't work properly.
Bluetooth works fine
1) You don't have any APNs set up (well none the phone can use anyway) - that's why you have no 3G (or 2G) data. Search for how to configure APNs manually
2) OCLF (one click lag fix) works perfectly with XXJPH. Make sure you have correctly rooted your phone.
3) This is a development release, not one which has gone through all the localisation that a full release goes through.
Seen a lot of people having problems with one click lagfix. From my experience the only thing that stops it working is having apps moved to sd card, use app manager and make sure all apps are on phone then re run and it should work.
On the other issuse i haven't suffered from any of them
FlorianO said:
2) The one click lag fix does not work on XXJPH
3) Input language selection.
Click to expand...
Click to collapse
2. For me it workes fine, had to remove SD-card thou when applying
3. Use swype files from XXJP1
First and foremost, thanks for the input
stuclark said:
Bluetooth works fine
1) You don't have any APNs set up (well none the phone can use anyway) - that's why you have no 3G (or 2G) data. Search for how to configure APNs manually
Click to expand...
Click to collapse
As I wrote in my previous post, as soon as someone pointed out that I need to configure the APNs I did that and now both Internet and MMS are working fine. However, I haven't seen anywhere mentioned that this was needed with this firmware version (and, again, this was never an issue with the previous versions).
stuclark said:
2) OCLF (one click lag fix) works perfectly with XXJPH. Make sure you have correctly rooted your phone.
Click to expand...
Click to collapse
Are there any XXJPH-sepecifc OCLF instructions ? TIA for any pointers / instructions
stuclark said:
3) This is a development release, not one which has gone through all the localisation that a full release goes through.
Click to expand...
Click to collapse
Understood...Is it possible to add localisation to this release ? Or is the only option to wait for the official full release...
drygmasken said:
3. Use swype files from XXJP1
Click to expand...
Click to collapse
Can you please point me to where to find them and the installation instructions (I'm relatively new to Android...)
Thanks in advance for the help
Pume said:
Why do people always forget that Finland (and also Iceland) are a part of Scandinavia? Anyway good to know this.
Click to expand...
Click to collapse
Thats absolutely not true!!
For Scandinavien readers: "no.wikipedia.org/wiki/Skandinavia"
For all others: "en.wikipedia.org/wiki/Scandinavia"
The original and "true" term Scandinavia is only referring to Norway, Denmark and Sweden. Sorry You Finnish guys!
FlorianO said:
Can you please point me to where to find them and the installation instructions (I'm relatively new to Android...)
Thanks in advance for the help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=7412595&postcount=73
drygmasken said:
http://forum.xda-developers.com/showpost.php?p=7412595&postcount=73
Click to expand...
Click to collapse
Thanks again.
Sorry for being so thick (well, I'm new to Android...) but it seems that in order to (re)mount the "/system" partition in read-write mode (where these files must go) I must root my device anyway...
Or is there any easier/simpler alternative ?
2) The one click lag fix does not work on XXJPH
- Your phone has to be rooted.
- If you use One Click Lag Fix v1.6.7 by RyanZA UNINSTALL all apps on SD card: Settings-> Applications->Manage Applications->On SD card->remove all apps (e.g. Google Earth, Angry Birds)
You can re-install the apps after you have applied the 'OneClickLagFix V1+"
I've done some more reading and fixing it does look like "Major PITA": One needs to root the phone and there are some instructions on how to root JPH at this post: http://forum.xda-developers.com/showpost.php?p=8157213&postcount=289.
Still, that doesn't look for the faint of heart (or for those who lack the time and/or will to go through the process, for that matter).
Moreover, since the official 2.2 release is due in 3 days, I guess I'l live with the JPH as it is on my phone wait for that instead.
Thanks to all that tried to help.
ONLY problem I have is wireless errors sometimes, but can be solved by turning WiFi on in actual settings menu.
AdamDowning said:
ONLY problem I have is wireless errors sometimes, but can be solved by turning WiFi on in actual settings menu.
Click to expand...
Click to collapse
Well, I have "issues" with that as well -- if the WiFi is turned on, then data network traffic goes through the WiFi instead of 3G (normal behavior). However, when the WiFi is turned off I need to toggle the phone on and off a few times before the 3G connection is re-established.
Anyway, hope that all that will be fixed in the official version...
Sometimes after cancelling calls my JPH just stays black screen ... need to pull the battery.
I found GPS really best through all builds ... but not satisfying. It gets a fix kind of quick but isnt very accurate :/
OCF, Bluetooth and swype are just working fine :> no issues there. Especially market is just cool ... no fix needed. Found flash and looks like all apps are there.
Hey everyone, after some research/testing ive been able to write a new PRL to the Hero! This means you can have 3G, even with no Sprint EVDO coverage!
THIS IS POSSIBLY DANGEROUS!! I AM NOT RESPONSIBLE IN ANYWAY FOR ANY LOSS OF PROPERTY OR MONEY! DO THE FOLLOWING AT YOUR OWN RISK. READ THIS ENTIRE THREAD BEFORE TRYING ANYTHING.
That being said, this is most likely frowned upon by sprint, so do so at your own ethical reason as well.
I did this with a stock, 2.1 hero; i have not tested it on anything else.
Insperation for it here, done on the evo: http://forum.xda-developers.com/showthread.php?t=696073
Ive also found that i now almost ALWAYS have max bars.
What youll need:
HTC Hero Diag Drivers:
http://rs79.rapidshare.com/files/293529424/HTC_Hero_DIAG_Drivers.zip
CDMA Workshop:
http://www.cdma-ware.com/workshop/demo/cdma_workshop.rar
New PRL:
http://dana.ucc.nau.edu/add46/00001.prl
Start by installing the diag driver, as well as the normal hero drivers.
Then go to the dialer and enter ##DIAG#
Open CDMA Workshop, assign your COM port.
Press connect then read and verify the information on the left.
Finally, go to the "Other" tab, select write under "PRL" and choose your new prl
When you see the finished message, reboot your phone.
Go to settings and updated your data profile, then, enjoy!
To revert
Just update your PRL from Settings
I am leery, only 1 post!
Just got my hero today Replacement for that POS Samsnung Moment.
I guess you can wait till somebody tries it? I dont know.
cordell12 said:
I am leery, only 1 post!
Click to expand...
Click to collapse
Yeah, for real
Xqtftqx said:
Just got my hero today Replacement for that POS Samsnung Moment.
I guess you can wait till somebody tries it? I dont know.
Click to expand...
Click to collapse
Nice work, but it's not gonna be this guy to try it first
No worries, Id do the same
Its not much different than the epics guide, except i use CDMA Workshop since ##prl# doesnt exist on the hero.
Xqtftqx said:
Hey everyone, after some research/testing ive been able to write a new PRL to the Hero! This means you can have 3G, even with no Sprint EVDO coverage!
THIS IS POSSIBLY DANGEROUS!! I AM NOT RESPONSIBLE IN ANYWAY FOR ANY LOSS OF PROPERTY OR MONEY! DO THE FOLLOWING AT YOUR OWN RISK. READ THIS ENTIRE THREAD BEFORE TRYING ANYTHING.
That being said, this is most likely frowned upon by sprint, so do so at your own ethical reason as well.
I did this with a stock, 2.1 hero; i have not tested it on anything else.
Insperation for it here, done on the evo: http://forum.xda-developers.com/showthread.php?t=696073
Ive also found that i now almost ALWAYS have max bars.
What youll need:
HTC Hero Diag Drivers:
http://rs79.rapidshare.com/files/293529424/HTC_Hero_DIAG_Drivers.zip
CDMA Workshop:
http://www.cdma-ware.com/workshop/demo/cdma_workshop.rar
New PRL:
http://dana.ucc.nau.edu/add46/00001.prl
Start by installing the diag driver, as well as the normal hero drivers.
Then go to the dialer and enter ##DIAG#
Open CDMA Workshop, assign your COM port.
Press connect then read and verify the information on the left.
Finally, go to the "Other" tab, select write under "PRL" and choose your new prl
When you see the finished message, reboot your phone.
Go to settings and updated your data profile, then, enjoy!
To revert
Just update your PRL from Settings
Click to expand...
Click to collapse
How is this any different that Techknowfiles PRLs that he created for using the old Alltell towers? I followed his thread for a long time and some of the PRLs he created worked ok, some did not. Did you actually create a new PRL, or is your 00001 the same as his?
Regardless, if at anytime this doesn't work, a PRL update through Device Self service will revert you back to a legit Sprint PRL...
If I'm not mistaken, this won't work if you're running cm/aosp based roms. You must use a sprint based rom, can anyone confirm this ?
Sent from my HERO200 using XDA App
brokentoaster24 said:
If I'm not mistaken, this won't work if you're running cm/aosp based roms. You must use a sprint based rom, can anyone confirm this ?
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
Well, if you load up in a Sense-based ROM, it should stick when you go back to AOSP.
BlaqkAudio said:
Well, if you load up in a Sense-based ROM, it should stick when you go back to AOSP.
Click to expand...
Click to collapse
Yes , just like manually updating a prl. I meant you won't able to do this with cm/aosp
Sent from my HERO200 using XDA App
You can flash the PRL on CM/2.2, The problem is, you cant update your data profile. So you will need to revert to 2.1 to apply this.
And this is techs PRL file, you can use whatever one you want.
I'll give this a shot, post results later
not trying to steal OP's thread but there's a much easier way to do this:
1. obtain msl code (if you haven't already)
2. ##775# and enter msl code to access manual prl updating
3. select new prl to be updated
4. update profile and reboot
i remember when someone else cooked up the prl's 01337 and 31337, the results were random for me. no real coverage gained and they usually slowed down my speeds. it's fun to hack things though
brokentoaster24 said:
I'll give this a shot, post results later
not trying to steal OP's thread but there's a much easier way to do this:
1. obtain msl code (if you haven't already)
2. ##775# and enter msl code to access manual prl updating
3. select new prl to be updated
4. update profile and reboot
i remember when someone else cooked up the prl's 01337 and 31337, the results were random for me. no real coverage gained and they usually slowed down my speeds. it's fun to hack things though
Click to expand...
Click to collapse
Awesome. Please report back with your results. I always get crappy service over here.
If this doesn't work, can I install an order prl?
Never mind. I found the answer to my question. Long live search!!
Xqtftqx said:
New PRL:
http://dana.ucc.nau.edu/add46/00001.prl
Click to expand...
Click to collapse
How do you download the prl? It keep opening to my browser on my phone.
oohaylima said:
How do you download the prl? It keep opening to my browser on my phone.
Click to expand...
Click to collapse
Try downloading from a computer, or browsing xda from the browser?
Sent from my HERO200 using XDA App
brokentoaster24 said:
I'll give this a shot, post results later
not trying to steal OP's thread but there's a much easier way to do this:
1. obtain msl code (if you haven't already)
2. ##775# and enter msl code to access manual prl updating
3. select new prl to be updated
4. update profile and reboot
i remember when someone else cooked up the prl's 01337 and 31337, the results were random for me. no real coverage gained and they usually slowed down my speeds. it's fun to hack things though
Click to expand...
Click to collapse
You guys could use *cough* my easy method to get your msl code *cough* haha
I'll be trying this out when I can and will let you guys know what results I get.
kyouko said:
You guys could use *cough* my easy method to get your msl code *cough* haha
I'll be trying this out when I can and will let you guys know what results I get.
Click to expand...
Click to collapse
thank you for linking that! i was trying to remember where that thread was but i gave up searching for it because it was late last night
obtaining msl is so much easier thanks to that thread!
as for the custom prl, i'm getting mixed results. this sort of hack is really hit or miss depending on your location. if you're trying it out, i suggest using it a whole day and see how your coverage is and probably try out some other prl's. the evo thread that is linked in the first post has a couple other prl's to try out.
OK hahaha... After I applied this PRL I barely get any data coverage, it stays at 1x the whole time
YMMV just because I'm having problems doesn't mean you guys will.
##PRL# doesnt work on any of the stock roms, also my method doesnt require you to find your MSL...
If your having any problems, MAKE SURE YOU UPDATE YOUR DATA PROFILE!
Also, you download the PRL on the computer.. not the phone.
Also, if you want your MSL, use "MSL Reader" from the market, its the easiest method.
Xqtftqx said:
##PRL# doesnt work on any of the stock roms, also my method doesnt require you to find your MSL...
If your having any problems, MAKE SURE YOU UPDATE YOUR DATA PROFILE!
Also, you download the PRL on the computer.. not the phone.
Also, if you want your MSL, use "MSL Reader" from the market, its the easiest method.
Click to expand...
Click to collapse
Yeah I noticed that as well, stock didn't work so I flashed nfx's 2.1 sense rom. And I tried updating data profile but unfortunately it stayed the same.
Also I couldn't use cdma workshop (unless i wanted to run a VM or possibly wine) seeing as I'm running linux.
Only downside to the MSL Reader is that it requires root - not that that's really a problem for more than the majority of the people, but I could be one for those that stumble upon this thread using google or something.
But yes, you would be correct CDMA workshop does make this process relatively simple
Hey folks, so testing out data speeds on CM10.1 after flash and they're terrible! Ping is in the 300-600s and it keeps showing a "DC" symbol next to my signal bars, where the H+ and LTE symbol usually is. Any ideas?
did you turned on drx? dc is.discontinued connection
Sent from my SGH-I337M using xda pt
remium
drx? no I don't believe so. Just flashed the rom like normal and when I went to use my data connection, it just showed the DC symbol. It bounces between H H+ and DC, really strange!
http://lmgtfy.com/?q=DC+HSPA+CyanogenMod&l=1
Change your network speed, check your APNs.
deleted
blk_jack said:
http://lmgtfy.com/?q=DC+HSPA+CyanogenMod&l=1
Change your network speed, check your APNs.
Click to expand...
Click to collapse
i'm getting real sick and tired of the attitude some people have on this site, developer or not... either way, i DID use google, but couldn't find any REAL info on the subject. also, i HAVE changed networks speeds and checked my APNs... if you feel like helping, then help, if not, don't be a smart ass by posting a "let me google that for you" link... seeing as that didn't help even in the slightest...
here, i have a link for you too http://bit.ly/NbLltc
TheSmokingAndroid said:
i'm getting real sick and tired of the attitude some people have on this site, developer or not... either way, i DID use google, but couldn't find any REAL info on the subject. also, i HAVE changed networks speeds and checked my APNs... if you feel like helping, then help, if not, don't be a smart ass by posting a "let me google that for you" link... seeing as that didn't help even in the slightest...
here, i have a link for you too http://bit.ly/NbLltc
Click to expand...
Click to collapse
Are you kidding me? The second link is to the CyanogenMod bug detailing exactly what the DC icon indicates. The title of the issue is: Add support for DCHSPAP. If you google that term, you'll find a better detailed description of what DC-HSPA+ is than what you'll get from someone on XDA.
Couldn't find any "real" info??
The #1 rule of XDA is search before posting. If you're sick of my "attitude", which literally consisted of me telling you to search (and searching for you), then maybe you're doing it wrong.
Hey guys I have a rooted LG v20 vs995 I cant make calls or send text messages I can receve texts just not senf them I have metro pcs is my service provider how can I fix this and help is greatly appreciated thank you for taking time out of your busy life to help a newbie
Saldivar said:
Hey guys I have a rooted LG v20 vs995 I cant make calls or send text messages I can receve texts just not senf them I have metro pcs is my service provider how can I fix this and help is greatly appreciated thank you for taking time out of your busy life to help a newbie
Click to expand...
Click to collapse
Check you have correct apn settings
Still_living714 said:
Check you have correct apn settings
Click to expand...
Click to collapse
I just tried 3 differnt apns and still cant send text messages
Saldivar said:
I just tried 3 differnt apns and still cant send text messages
Click to expand...
Click to collapse
(Update) fixed the calling and texting but now I dont have 4g lte
Saldivar said:
(Update) fixed the calling and texting but now I dont have 4g lte
Click to expand...
Click to collapse
Where are you getting your apn settings from? Make sure there the right ones
Still_living714 said:
Where are you getting your apn settings from? Make sure there the right ones
Click to expand...
Click to collapse
https://bestmvno.com/apn-settings/metropcs-apn-settings/ from here thats where I got my 3 apns from
Saldivar said:
https://bestmvno.com/apn-settings/metropcs-apn-settings/ from here thats where I got my 3 apns from
Click to expand...
Click to collapse
try this
http://apn-settings.com/us/metropcs-apn-settings-step-by-step-configuration/
Still_living714 said:
try this
http://apn-settings.com/us/metropcs-apn-settings-step-by-step-configuration/
Click to expand...
Click to collapse
When I try to change the mnc it wont resterger the apn its set to 260 and if I try to change it the apn wont save and now my 4g lte is just and E
I am rooted is there anything that I can flash or install to trick my phone so I can have 4g lte
Saldivar said:
When I try to change the mnc it wont resterger the apn its set to 260 and if I try to change it the apn wont save and now my 4g lte is just and E
I am rooted is there anything that I can flash or install to trick my phone so I can have 4g lte
Click to expand...
Click to collapse
Not sure if this will help 100%, but I am sure i can't hurt.
Since you're rooted you can go ahead and install this by flashing the zip in recovery.
After you have booted back up, open the new incall modz control app.
Then hit the three lines on the top left to open the control menu options.
Scroll down and click the advanced hidden menu section.
This section opens up several hidden menus.
You can look through and see what may give you the options you're looking for.
I suggest using the "apn unlocking" to give you access to edit the apn setting.
You can also play around in the "phone testing menu" section and look within the field test secrion to force LTE.
I must say BE CAREFUL because you could change a setting that may require a restore/reinstall of your rom!.
I have played with a lot of settings and never done any real damage, seems like it would just close the app of the option wasn't compatible with my phone.
The hidden menus are also accessible via a dialer code (which varies per device variant and there are playstore apps as well, don't remembwr the names.
I only suggest the mod, because it is part of ny oZoP project and it will give you lots of customizations for the caller id, plus the advanced hidden menu that i beleive you could use. Like i said though, there are other options and the choice is yours.
Good luck
stangdriver44 said:
Not sure if this will help 100%, but I am sure i can't hurt.
Since you're rooted you can go ahead and install this by flashing the zip in recovery.
After you have booted back up, open the new incall modz control app.
Then hit the three lines on the top left to open the control menu options.
Scroll down and click the advanced hidden menu section.
This section opens up several hidden menus.
You can look through and see what may give you the options you're looking for.
I suggest using the "apn unlocking" to give you access to edit the apn setting.
You can also play around in the "phone testing menu" section and look within the field test secrion to force LTE.
I must say BE CAREFUL because you could change a setting that may require a restore/reinstall of your rom!.
I have played with a lot of settings and never done any real damage, seems like it would just close the app of the option wasn't compatible with my phone.
The hidden menus are also accessible via a dialer code (which varies per device variant and there are playstore apps as well, don't remembwr the names.
I only suggest the mod, because it is part of ny oZoP project and it will give you lots of customizations for the caller id, plus the advanced hidden menu that i beleive you could use. Like i said though, there are other options and the choice is yours.
Good luck
Click to expand...
Click to collapse
Will this mess with weta that's what I have on my phone right now
Saldivar said:
Will this mess with weta that's what I have on my phone right now
Click to expand...
Click to collapse
I've looked through the app and I can't find force lte I scrolled down and that's all I can view
Saldivar said:
Will this mess with weta that's what I have on my phone right now
Click to expand...
Click to collapse
Saldivar said:
I've looked through the app and I can't find force lte I scrolled down and that's all I can view
Click to expand...
Click to collapse
Well it looks like I don't need to answer the first question, but I will just mention for other users, the mod has been tested and confirmed working on every "stock" based rom without issue.
As far as the menu options not showing, it looks to me if the setup you are running has had the files needed for the options debloated or possibly that variant doesn't include them by default.
I have attatched a flashable zip of the files needed, but I DO RECOMMEND MAKING A FULL BACKUP just in case.
After you get your backup finished just flash the zip in recovery and proceed back to the app for the extra options.
Good luck again and let me know how that goes. Your feedback is valuable to me so I can ensure that everyone gets the same experiance as I intended
stangdriver44 said:
Well it looks like I don't need to answer the first question, but I will just mention for other users, the mod has been tested and confirmed working on every "stock" based rom without issue.
As far as the menu options not showing, it looks to me if the setup you are running has had the files needed for the options debloated or possibly that variant doesn't include them by default.
I have attatched a flashable zip of the files needed, but I DO RECOMMEND MAKING A FULL BACKUP just in case.
After you get your backup finished just flash the zip in recovery and proceed back to the app for the extra options.
Good luck again and let me know how that goes. Your feedback is valuable to me so I can ensure that everyone gets the same experiance as I intended
Click to expand...
Click to collapse
Thank you for your help I can't get around having lte on my v20 with metro pcs when I force lte only my phone says I have no service so looks like I'm going to have to switch service providers
Hey All,
I had to update this thread a little it was pretty terrible on wording and full details. (Sorry About That)
The current hotspot hack still works on this new update too which is now CRL2.
You still need to add dun but it will look like this example below....
Ex: default,mms,dun,xcap,supl << Credits to whoever found this out first I just applied it to here and it works I’m currently using it now for this post :fingers-crossed::good:
*In order to edit your APN you will have to download Quick Shortcut App from the Play store*
Another thing if you didn’t know Good Lock is out and working perfectly too with new clock options and custom pulldown options that you can set to your liking.
*I added screenshots to help set what I set or how my good lock looks.*
I have a T-Mobile S8+ on Sprint network, and OTA keeps failing.
Can I just ODIN T-Mobile S8+ with Sprint's RIB firmware when it comes out?
Will I lose data?
lentm said:
I have a T-Mobile S8+ on Sprint network, and OTA keeps failing.
Can I just ODIN T-Mobile S8+ with Sprint's RIB firmware when it comes out?
Will I lose data?
Click to expand...
Click to collapse
that im am not sure of...id reommend readin around before you upgrade
alot of things has changed in the ui...im sure some code have changed too
Tha_Dynasty2049 said:
that im am not sure of...id reommend readin around before you upgrade
alot of things has changed in the ui...im sure some code have changed too
Click to expand...
Click to collapse
Thanks, I still can't find the answer in the other threads though.
What does xcap and supl do for the apn settings?
zune70 said:
What does xcap and supl do for the apn settings?
Click to expand...
Click to collapse
they was added by sprint in the newest update
it was not like this before the update
XCAP is a protocol which enables a user configuring his service data (e.g., modifying a call forwarding number, changing his barring services) on the Multimedia Telephony Application Server (MTAS). The XCAP flow is typically carried over the default bearer of the Internet APN.
SUPL is a technology which utilizes existing standards where available and possible, to transfer assistance data and positioning data over a User Plane bearer, such as IP, to aid network and SUPL Enabled Terminal (SET) based positioning technologies in the calculation of a SET's position
lentm said:
Thanks, I still can't find the answer in the other threads though.
Click to expand...
Click to collapse
Id say leae it then...id like to have a perfect working phone over guessing for a new software you may not like
Tha_Dynasty2049 said:
The new October Patch is nice so far....they have disabled Calling Plus but gave u the real feature
which is under connections and then voice networks and you will see VoLTE
turn it on if you want to use internet and phone at the same time.
Besides that we got AR Emojis and now super slow motion.
My hotspot hack still works on this new update too.
You still need to add dun but it will look like this below....
Ex: default,mms,dun,xcap,supl << Credits to whoever found this out first I just applied it to here and it works im currently using it now for this post :fingers-crossed::good:
Another thing if you didnt know GoodLock is out and working perfectly too with new clock options and custom pulldown options
*I added screenshots to help set what i set or how my good lock looks.*
Click to expand...
Click to collapse
How do we get the hotspot?
EDIT: NVM, got it!
JoeFCaputo113 said:
How do we get the hotspot?
EDIT: NVM, got it!
Click to expand...
Click to collapse
Great...
I did forget to mention i got to my apn settings by using Quick Short Cut Maker App
Tha_Dynasty2049 said:
Great...
I did forget to mention i got to my apn settings by using Quick Short Cut Maker App
Click to expand...
Click to collapse
Have you done the new update yet? Did Hotspot still work?
13druber said:
Have you done the new update yet? Did Hotspot still work?
Click to expand...
Click to collapse
Yes currently using it on CRK1 now to reply
Is there a way to convert CRL2 to CRL 1?
This is still working on CRL2. I just redid mine last night. Are you having a problem with it?