Hi all, thanks for all of the great info/help including wm liberation. I had just received the unit 2 days ago, and I was wondering if it's possible to connect vista to ATT's unlimited 20 bux 3g network. The wm side works flawlessly via ie but when I switch to the vista I can't seem to connect. Please help me with a step by step instruction (not too fluent with computers), if it's possible.
Thanks for the help.
did you try running the modem from the shagcontrol? if you did try running internet sharing on the snap view side
Hi janstan, I did enable the modem via shag control, how do I enable internet sharing from snap vue or windows mobile.
Thanks for helping
Never mind, the shift resolved the issue by itself.
Thanx
no worries.
Related
Hello everyone, Ive searched but come across no help
Im using a Cingular 8525 with the 2.06 firmware and windows vista ultimate. I cant get my computer to connect to it for Dial up networking. My phone allows it to use it (its an option on the phone/laptop when pairing) but it does not connect! It keeps giving me errors. I have tried to enable "Bluetooth DUN instead of USB in the internet sharing app, but nothing changes.
Also, how can I get Windows Mobile Device Center to access my phone via bluetooth? Thank you!!!
can anyone offer assistance? thanks
Anyone at all? This is driving me nuts! I even used two different bluetooth drivers in my vista pc...but still nothing. it works via usb, but not bluetooth. Help???
I got Internet connection sharing working via BT PAN with the new ROM and Vista. Never tried to use it as a modem though.
DirkM said:
I got Internet connection sharing working via BT PAN with the new ROM and Vista. Never tried to use it as a modem though.
Click to expand...
Click to collapse
can you give us your step by step instructions on how to do that?
Id even be ok with getting it to read with a USB cable... After upgrading to WM6, I lost sync support for Vista...
I always take my time before jumping into anything new, On my experience bugs take a while to be sorted out and fixed.
My advice, stick to XP and WM5 for a year at least, then it would be a lot safer to upgrade.
Hi all, need help with my liberated shift. It was working fine for the past 2 wks that I have had it. 3G worked flawlessly on both wm/vista.
I had installed Mozilla firefox browser on the vista side 2 days ago and now I can't get a connection. The wm side shows the connection to be 3g but I am not recieving any push mails or weather updates at all.
When I tried to manually send/receive I get an syncro error with no internet connection, yet the display shows 3g?
On the vista side, it just shows the connection to be local only. I uninstalled the Firefox/restarted but this problem is not going away. By the way..I have the performance at the vista side set to "high performance" as well. Please help me out...
Thank you
Same problem here since 5 minutes, re-installed german ROM, Provider E-Plus BASE, Data flat.
No idea, what happen...
What is really strange is that I am showing full bars @ 3g on the wm side...hopefully someone can bring some light to this matter...but glad that it's not a hardware issue as I am really enjoying this device..despite the battery life.
I had the same problem. It went away after updating connection settings in WM. My shift seem to periodically need that (or perhaps the "switch off..." that follows). Sorry if that was an obvious suggestion, but it realy helped me from a similar problem.
Also, the new usb... driver included in the driver update is said to ignore powersettings on vista. Since upgrading, I have run on powersawer mode without any network problems (provided that I safley remove usb stuff like SD or Lan, before hibernating vista). Have anyone else seen that?
as usual..thanks to all for the help... the real culprit was myself, as i had forgotten to pay the bill for the data service...all is good now... hehe.. so the only item that remains to be solved for me with this great device is the battery...all else is good!
thanks
Hey, perhaps I am blind, but I can't find anything here that would help me.
I am looking for a Software that helps me controlling my Mobile Device (HTC Touch Diamond) from my Computer, via LAN, Bluetooth, best would be over Active Sync - USB
Does anyone know there something helpful?
Thanks a lot
My Mobiler
Please have a look under www.mymobiler.com
Thanks! This Software is great!!! Better then I expected!
this is pretty coool! ashame the lag when textin from the laptop
you may wanna check this out
http://soti.net/
remote control via internet
hi guys,
perhaps I am blind too, but I can't find anything here that would help me.
I am looking for a Software that helps me controlling my Mobile Device (HTC Touch Diamond) from my Computer, via internet. I search a software like VNC but working in reverse!!! So, i need to run a program installed on my diamond while the phone is several miles far from me
Does anyone know there something helpful?
Thanks a lot
P.S. sorry for my english....
Use VNC server (pocketvnc) instead of client.
vnc connection problem
hi HwangPL,
thank you very much for your replay. After your post i've downloaded pocketVNC server version 1.4.2.0(demo version), but i'm not be able to use it. The vnc client on my pc says "connection failure". I think I'll go crazy before sunday......
If you or anybody else have a solution please post it!!!!!!!!!
Thank you one more time.
Try to use old VNC Viewer on your PC. I cannot connect when my mobile phone uses GPRS connection, but it works with WIFI.
I cannot test it right now, cause I don't have any WIFI connection (it surely worked some time ago).
I'll try to test it tomorrow maybe
I think there are a lot of problems with the type of connection. I use a hsdpa connection with my diamond, while my pc is connected to internet with another mobile phone that works with an umts connection. I'm not sure how to configure the firewall. However i'm not sure how to configure the tabs of vncpocketserver. I think that's why i'm not understand very well english (i'm italian) and on the web i didn't found anything wrote in my language.
So, you are my only, precious, last chance......
CIAO
I think there are a lot of problems with the type of connection. I use a hsdpa connection with my diamond, while my pc is connected to internet with another mobile phone that works with an umts connection. I'm not sure how to configure the firewall. However i'm not sure how to configure the tabs of vncpocketserver. I think that's why i'm not understand very well english (i'm italian) and on the web i didn't found anything wrote in my language.
So, you are my only, precious, last chance......
CIAO
OK. I used vncserver v.1.4.5.0 demo, on my pc VNC Viewer Enterprise E4.5.1 via WIFI (on mobile as internet connection) and it worked. Goodluck!
hi, i came back!!!
Finally i've found the solution. The problem is the IP address. My operator doesn't give me a public IP but a NAT address. This is a very big problem because the phone can't accept any type of connection by the web. Fortunately i found a beutiful program called "Hamachi" that works on both the computer and the PocketPC. So i resolved my problems.
Thanks very much to all for suggestions.....
Hey there,
I am having i think a small problem with both SOTi and My mobiler.
I Have a Touch diamond and when i am seeing the camera on the PC all goes black in PC preview, but on device i can see the camera images.
Can anyone help.
Brgds
Hi
Strange nobody else having same problem.
I believe the reason with the no preview its due to the autofocus, can anyone check on this.
Tks in advance
Jeyo Mobile Companion 2.1
I am trying to make my Vista box to connect 3G network through my mobile. But I have tried many ways still it show me the error as attached.
I have no problem to have active sync working and have followed the instruction on Samsung help page to install their PC Suite. Yet, things is not working... Same problem occurs.
Any hints from any one on how to work this out?
looking for hints...
Anybody have any idea which I had did wrong?
There is an option of it, and for sure it is able to work as Modem for my notebook. Just wondering why can't my notebook recognize the phone when I start the Internet Sharing and connect my phone to GMS Data network (3G/EDGE/GPRS).
Just to follow up with some extra screen capture...
There is a screen popup as following:
Have just tried this on Bluetooth PAN, IT WORKS FINE!!!! (Never think to use this since the WM is really eating too many battery power~!)
But how to get the USB Connection mode work as well?
Hey guys, I've had a Mogul for a few years and come to this site frequently. I just got a new laptop with Windows 7 and cannot get internet sharing to work. I have a SERO plan and have never had any issues with XP. Now I have to use wmwifirouter, which would be ok... but after a few minutes the phone starts overheating when using wifi (the call button no longer works because of this).
Anyone have any tips? I've used nueUSB and changed all of the USB to PC settings, but the best I ever get is my computer will connect for a second or two then disconnect.
Thanks in advance for any help.