Hello,
I've tried flashing lots of ROMs, install some software to test the main camera, and configure it to it's most, but it's useless.
It used to work fine until 1 week ago, when I tried to capture a nice picture of a landscape and it was all blury (Extremly blurry)!
The button switching the focus seems to not be working at all, so I guess this is a hardware problem.
Any ideas how this can be fixed? Has anyone ever experienced this?
The phone has no warranty, and some help would be really appreciated.
If needed, I could show you some example images taken with it.
Tho, this is 1 pic taken with it (Attached).
Thanks,
Snaz
Well, I'd say you are very likely correct in assuming it is the Macro toggle switch. It will b stuck in macro mode or even between macro and normal.
Do you see the black arm sticking out the side of the camera?
That is the macro lever and it engages with the macro switch on the back casing.
Hopefully it has just disengaged and removing the back you will be able to re-engage them (quite fiddly but not difficult technically!!)
It may be that some plastic part has broken off - might be fixable with superglue.
Or if there is physical damage then you could just move the lever to "normal" position and leave it there. How many times do you use macro??
Cheers
Mike
Thanks Mike, I fixed it, it was that macro button wrong positioned, and it managed to get out from the arm. Really thanks for your help, i appreciate it so much.
Cheers,
Snaz
snaz said:
Thanks Mike, I fixed it, it was that macro button wrong positioned, and it managed to get out from the arm. Really thanks for your help, i appreciate it so much.
Cheers,
Snaz
Click to expand...
Click to collapse
Good news. Pleased it had just slipped off the lever and was not broken
Mike
mikechannon, you are an expert ,you are so great.oh
common
This can be quite a common problem when people remove the back cover of there hermes as you have to line up the lever on the camera to the pins on the macro slider on the case. I believe the simplest way is to move the lever to the 'up' position (as shown in the photos above) and ensure the macro switch is in 'landscape/wide' mode, then as you put the case back together, the 'planets should align'!!!!
Related
I almost never use the camera mode on my Trion, but last night I wanted to take some shots at a party. When I tried to turn on the flash the icon was gone from the screen. I tried the function list it has flash on/off but when I hit "on" nothing happens. Like I said I almost never use the camera, but I know it use to work. The only thing I did recently was add Hermes Tweek from fit4cat. I have tried soft reset, but I realy don't want to hard reset just for a stupid flash. I'm not the most tech savey guy, so I live in fear of bricking my phone every time I rom update. I like the way its set up now, so if it has no flash so be it.... But the pictures I could have had of last night.....Well, photo ops like that don't happen every day!!!
Flash
pdausr1 said:
I almost never use the camera mode on my Trion, but last night I wanted to take some shots at a party. When I tried to turn on the flash the icon was gone from the screen. I tried the function list it has flash on/off but when I hit "on" nothing happens. Like I said I almost never use the camera, but I know it use to work. The only thing I did recently was add Hermes Tweek from fit4cat. I have tried soft reset, but I realy don't want to hard reset just for a stupid flash. I'm not the most tech savey guy, so I live in fear of bricking my phone every time I rom update. I like the way its set up now, so if it has no flash so be it.... But the pictures I could have had of last night.....Well, photo ops like that don't happen every day!!!
Click to expand...
Click to collapse
pdausr1
You probably know this but in case not - as you don't use camera often, the flah icon will vanish if the camera has slipped off straight picture mode into the mode where it takes a series of pictures. i.e if you look top left corner you should see a logo of a camera not three symbols of pictures lying on top of one another. I find mine constantly slips off straightforward picture mode because the jog wheel gets moved without noticing. The jog wheel cycles through all the different camera and video modes.
Mike
Nope its in single shot normal camera mode, but thanks for the tip on the scroll weel I did not know that. I think one reason I don't use the camera more is I hate using the styles when I'm taking a picture, so if you have anymore hardware button tricks you want to share.
Camera Hardware keys
pdausr1 said:
Nope its in single shot normal camera mode, but thanks for the tip on the scroll weel I did not know that. I think one reason I don't use the camera more is I hate using the styles when I'm taking a picture, so if you have anymore hardware button tricks you want to share.
Click to expand...
Click to collapse
Don't need stylus for camera. Start camera with button on side of case.
Take pictures with the Dpad button ie one in centre between the two phone buttons.
Accept the piture by pressing it again and your ready for the next picture.
Exit camera by pressing OK hard key button.
Mike
You are ok how ur now mate.....the flash is useless if not u want to use it for torch....even pictures taken from 5-6 feet away dont get any diffrence with flash on and off at night....though 1-2 feet picture will give you a lot of change...all white washed brighten up dude!!!!! i did took atlist 200+ picture with my tytn but i cant remember a picture which were benifited from the using of flash....
anyone any comment??
Night photos
Yup, Sajib, you're right - day photos pretty good, night photos rubbish. Flash 80% useless except for certain angles when taking night photos in macro. I have nothing I would need to photograph in macro in the dark but there maybe many who have!?
Mike
Well I guess I will just have to find my keys with the light of the screen, as that seems to be the only thing it good for. Thanks for the tips. Who knows mabey the flash will come back when I get up the guts to flash the Cingular rom.
Hi All,
I have updated to the latest AKU3 ROMs and also a few months ago I replaced the housing...However, I've noticed that the screen does not automatically rotate when the screen is swivelled??
Now is this because I did something during re-assembly of the housing OR is there something in the ROM's that disables the hardware somehow??
Cheers
ODY
Unlikely to be the rom, since it's part of the system HTC provided.
If it's been disassembled it's more likely that.
V
vijay555 said:
Unlikely to be the rom, since it's part of the system HTC provided.
If it's been disassembled it's more likely that.
V
Click to expand...
Click to collapse
hey VJ, sorry to bother but do you know what jumper/cable/connector/switch to jump/disconnect/tape inside the Universal to keep it from switching?
I'm sure I saw someone mention that the screen rotation is done by a magnet and switch? It's possible that maybe a small magnet fell out during disassembly? But I have looked throught the Universal repair manual and I can't find any reference to such a magnet??
I'd be nice to know exactly where it is so one would be able to take it out, if it were easy. I don't know if I wanna disasemble mine yet...
EDIT found it!! If you use a very, very light metal chain, as I did, with a keyring @ end, you can hover it around the Universal and see the tension of the chain when it's near the magnet. the keyring sticks too!
it's on the lid, behind the video-call video camera. I'm going to check the lid part of the manual.
Well taking the screen section apart is easy! You don't have to disassemble the whole unit. Looks like my magnet fell out then! Trouble is I want to sell mine so I'll just have to declare the auto screen rotate doesn't work (I've made sure that there is the rotate screen icon on the task bar though!!)
Cheers
Ody
odyseus said:
Well taking the screen section apart is easy! You don't have to disassemble the whole unit. Looks like my magnet fell out then! Trouble is I want to sell mine so I'll just have to declare the auto screen rotate doesn't work (I've made sure that there is the rotate screen icon on the task bar though!!)
Cheers
Ody
Click to expand...
Click to collapse
it works!! I tested it with the very small and highly magnetic point in the bezel of my tablet PC (to hold the pen) and it did change orientation.
thing is that it seems to be stuck beside the sound-holes (when the unit is closed).
I wonder how could I disassemble the lid only? are none of those screws @ the bottom connected to the back part of the lid? if so, that would be awesome!
Hi, on the xda's ftp, you'll find the maintenance manual for Universal...may help you to disassemble yours
thanx for the link!
however, it seems rather risky to try to pry the bezel open while still on the unit. Anyways I'm doing it right know. I'll get back to you.
I did pry it out and took the magnet off... painless(*) procedure and flea-sized magnet! don't loose!
I took a couple of pictures detailing the magnet position and the lid disassembled while still on the unit.
if you want to do this procedure do not loose the tiny screws and...
(*) be careful with the outer speaker (the one that lets you hear a call while the screen is facing the keyboard when closed), it isn't hard wired, it's just two small and fine contacts that might get distorted when putting the lid cover back... I had to take mine out again to correct this problem.
also, be careful with the screw driver and digitizer, as you'll be working in very akward positions to avoid disassembling the whole unit, and take off the battery of course.
Thanks for the photos - looks like my magnet feel out so I bought some 1/8 inch square magnets from ebay. It took a couple to find the sweet spot where the screen rotated but at least it works fibe now!
Cheers
Ody
odyseus said:
Thanks for the photos - looks like my magnet feel out so I bought some 1/8 inch square magnets from ebay. It took a couple to find the sweet spot where the screen rotated but at least it works fibe now!
Cheers
Ody
Click to expand...
Click to collapse
no problem. I'm also going to put the magnet back, now the unit doesn't now when it's closed, and therefore the outer speaker does not work. the screen also does not turn off when closed, only when the system timer tells it too... oh well.
you can turn the screen off by pressing the power button briefly.
no ext speaker though! maybe there's a way in software to disable just the rotation; i think the guys trying to get linux comfortable on the universal have some experience with it, maybe they can help.
Hey,
my Hermes fell on the floor and now the camera button is not working anymore..no big deal since i hardly ever use the camera anyways...but in the rare occasions i do, i just wanted to re-map the camera to another button..which worked fine, only problem is that i can't take any pictures since i am not able to re-map the 'take picture' funktion ! can anybody help me ?
thanks
When camera application is active, you can take pictures using the center directional button.
LOL... DOH! It's not like the world comes to an end if the camera button is broken...
Thanks hacqua,
found it out myself yesterday
@NRGZ28
did somebody mention 'the end of the world' ? must've been a different thread pal..
LOL....
My camerabutton has also a failure on it, and I used the enter-button on the keyboard, the button is much easier.
Thanks
i dropped my phone hard a week or so ago and was trying to find the same answer.
yeah anything that does an enter will take a picture.
keypad. center button. pressing down on the scroll wheel. all will take a picture.
I wonder what it is about that button that makes it so "fragile"
I basically, not literlly, threw my phone at concrete... it scuffed and the camera button broke. Internal speaker wire came undone as well.
had to void the warrenty to open it up and fix it but i was amazed at the phones durability at least externally.
now if only the software was as solid.
Problems occur after replacement of the panels, interested, which provides sensor signals to change a picture in portrait and landscape mode, I would be very grateful if you specify eventoalnite causes of this accident, IMATE JASJAR phone is silver and the new panel is Q2 black, thanks in advance
enigma79 said:
Problems occur after replacement of the panels, interested, which provides sensor signals to change a picture in portrait and landscape mode, I would be very grateful if you specify eventoalnite causes of this accident, IMATE JASJAR phone is silver and the new panel is Q2 black, thanks in advance
Click to expand...
Click to collapse
Anybody experienced this problem, I accept any suggestions and idea
The screen stops rotating when the casing is replaced due to you leaving a small magnet that is located next to the screen in your old case. It's a fairly common mistake and the small magnet is easy to overlook.
enigma1nz said:
The screen stops rotating when the casing is replaced due to you leaving a small magnet that is located next to the screen in your old case. It's a fairly common mistake and the small magnet is easy to overlook.
Click to expand...
Click to collapse
exactly this debate with a friend, consider that the panel was missing that part, now wait to prestigne another part, because mine is different and will test, thanks a lot, I promise to write what happened
enigma79 said:
exactly this debate with a friend, consider that the panel was missing that part, now wait to prestigne another part, because mine is different and will test, thanks a lot, I promise to write what happened
Click to expand...
Click to collapse
The new casing does not come with the magnet pre-installed, of course, you have to actually pull one out of your old casing and place it into the new one. No need to debate, that part is what makes your screen rotate.
enigma1nz said:
The new casing does not come with the magnet pre-installed, of course, you have to actually pull one out of your old casing and place it into the new one. No need to debate, that part is what makes your screen rotate.
Click to expand...
Click to collapse
The problem was in the magnet, was assembled phone today and everything is fine, special thanks to enigma1nz, to magnets was not there on the panel, but this panel was the second hand has fallen and appears in dismantling, now everything is OK
Idk if this was ever talked about but I want to know.... Has anyone ever thought about a way to fix the front facing camera image? you know, it shows everything backwards or reversed?
mine's working fine never noticed anything flipped
I never noticed it until someone mentioned it here. So I checked it, and sure enough, everything is reversed.
Just like a webcam. Shows YOU as others would see you. The right side of your face would be on the left side if you were facing yourself.
But if you take a pic, it should not be backwards.
And why wouldn't it be? it's taking a snap of what you see on the screen.
Remember, the front was designed as a video chat device, hence the "reversed" image, not for taking snapshots of you and other things.
You have a better camera for that which behaves as it should.
Front cam functions as designed.
Compusmurf said:
And why wouldn't it be? it's taking a snap of what you see on the screen.
Remember, the front was designed as a video chat device, hence the "reversed" image, not for taking snapshots of you and other things.
You have a better camera for that which behaves as it should.
Front cam functions as designed.
Click to expand...
Click to collapse
That makes no sense.
EDIT: read up on it.
Compusmurf is clueless. The front camera in reverse is for easy centering of your own face - it behaves like a mirror.
Compusmurf said:
Just like a webcam. Shows YOU as others would see you. The right side of your face would be on the left side if you were facing yourself.
Click to expand...
Click to collapse
That's where you're wrong... what you see from the front camera is a MIRROR image. NOT what others would see if they are looking at you. And for the record, most webcam applications allow you to switch between mirror image or "normal".
So in other words, there's no fix currently
as others would see you? easier for centering?
What you meant was, as other people would see you if they were looking at you in their rear view mirror, or in another mirror, not how they would normally see you. Im wondering if you guys have ever used a web cam. Ive been using them since they hit the market long ago and ive never seen a mirrored image of someone unless they flipped it with their cam software. And having the image reversed doesn't make it any easier to center yourself either lol. Good try guys. Its a setting in the camera config once you switch to the front facing camera on the thunderbolt.