i had flashed udk rom which change my splash too. i need to take my phone back to repair, but it show different splash screen make the warranty failed.
So, how can i flash back to "smart mobility" this word. Thank alot!
Flash original HTC Rom - this contains HTC 'smart mobility' splash screens etc.
Search through Forum to find the ROM or download from HTC club website.
lcyjacky said:
i had flashed udk rom which change my splash too. i need to take my phone back to repair, but it show different splash screen make the warranty failed.
So, how can i flash back to "smart mobility" this word. Thank alot!
Click to expand...
Click to collapse
push!!!
lcyjacky said:
i had flashed udk rom which change my splash too. i need to take my phone back to repair, but it show different splash screen make the warranty failed.
So, how can i flash back to "smart mobility" this word. Thank alot!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=405903&page=2
see #13
Related
I've just upped my IPL/SPL to 3.08, GSM to 2.69.11, and I'm about to try out Faria's WM6 ROM, but I'd like to backup my initial boot screen before I do- I'm not sure if I still have the image located anywhere else and would rather not re-author it!
I've already backed up the welcomehead.96.png file for the second splash screen, but I'm up against a wall trying to pin down how I can back up the inital splash screen! Any and all help would be greatly appreciated... Thanks!
-Bertokamus-
If you have your original ROM backed up, just use wizard service tools and run the nbf to nb tool. When you run that it will seperate it all out in to its constituent parts. 9d000000-HTC is the first splash screen, 92000000-Splash is the second splash screen and the welcomehead.96.png is actually the third splash screen. I just can't figure out why you would need to back those up.
I wanted to back them up so I'd have them to employ in my new Faria ROM instead of the splash screens included. As I mentioned, I'm not sure that I have the initial splash screen saved anywhere, so instead of reauthoring it, it would have been convenient to have a backup.
However, since I didn't get a reply before flashing (impatience!) the splash screen is gone, anyways. I do have a "myrom" .bin backup from WizBackup, though- any chance I could pull my splash screen out of there to your knowledge?
All you have to do is download the ROM you had on there from your service provider and then use wizard service tools just like I told you how to do in my first post here and you'll be able to extract the first 2 splash screens out of it. Getting the 3rd splash screen out of it is doable, but a lot more complicated and since you said that you already have it backed up I won't go into that anyway.
Here's some AT&T splash screens that I found. I have no idea if they are the ones you had before or even what they look like but you're welcome to try them out and see if you like them or not. Just run the RUU and it will install them for you.
I'm sorry, perhaps the miscommunication here is that I totally customized/modified/created/crafted/digitally graphically enhanced 2 of the 3<?> splash screens the Wizard shows on booting... I'm not looking for the stock Cingular and WM screens. I was looking to back up my CUSTOMIZED splash screens- sorry, thought I had mentioned that... I'll try and pull apart my WizBackup .bin and see if I can dig the initial splash screen I'm looking for out of that, I guess...
-Bertokamus-
oh, I understand. I didn't realize you had done them yourself. Hopefully they're in your wizbackup.bin then. Good luck.
I need help. I tried to cook a rom with udK's kitchen got everything finally and now my device is stuck on "smart mobility" screen where the R,G, D are displayed. I am not able to establish an active syn conncetion to revert back to oem rom. Any ideas please before I am stuck with a $750 paper weight.
turcomora said:
I need help. I tried to cook a rom with udK's kitchen got everything finally and now my device is stuck on "smart mobility" screen where the R,G, D are displayed. I am not able to establish an active syn conncetion to revert back to oem rom. Any ideas please before I am stuck with a $750 paper weight.
Click to expand...
Click to collapse
Hi,
flash your phone from bootloader :
1 - hold camera button and soft reset "you must have 3 color screen"
2 - flash any ROM you want
Tried that and still nothing.
Do try flashing with any original HTC ROM when you are in the SPL screen. Hope it works for you as it did for me.
Once successful, you will need to do hard-spl again and proceed to flash home-cooked ROM.
See thats the problem I cant get to the 3 color screen. This sucks balls.
I hate the Win 6.1 crappy splash screen
With my Hermers I used to flash the splash screen with some other pictures
However if I ma not mistaken, as long as there is no Hard SPL for the Rhodium we cant really do that
Is there another method ?
Download Advanced Config Tool 3.3....latest version.
http://www.touchxperience.com/en/ad...vanced-configuration-tool-33-cab-install.html
Once you install it...it should be under the HTC Splash screen and Windows Splash Screen.
You will see the files and then you can do what you want with it
Shame on me I have the tool and didnt even checked it !
Thanks a lot (Feeling like a lazy bastard...)
Thanks I didn't know you could do that.
Hi,
i have searched all the forum... but found nothing helpful.
i want to change the the bootup screen, when i push the softreset button.
on the normal P3450 there is a black screen, showing smart mobility. in my case there is a branding screen.
how can i remove this screen or change it?
nbimg: HTC splash screen tool
This may be of some use, I have a zip (Splash Screen Changer) that I found around here somewhere, I don't know where, and I haven't tested it. I will search around to see if I can get it again, I think it was by dsixda maybe, but I am not too sure.
thank you, but i cant change it with this sort of tool. i think its a part of the rom, maybe embedded....
It is the screen you will see, before you get into the bootloader, not the windows booting screen.
technorocka said:
thank you, but i cant change it with this sort of tool. i think its a part of the rom, maybe embedded....
It is the screen you will see, before you get into the bootloader, not the windows booting screen.
Click to expand...
Click to collapse
Then you need to re read the thread. It creates a rom update utility to flash only the splash screen. I did this to get rid of the t-mobile splash screen.
Confessed-Is "Stick Together" the "splash" or "startup" screen?
I'm a little confused. I want to change the Stick Together screen on my T-Mobile HD2, but I can't figure out if its the splash screen, startup animation screen, welcome192.png, or what.
I installed a cab I thought would change it, but it changed the animated screen that comes just after the Stick Together screen. I think I need to flash it to make the change.
I remember doing something similar on my Tilt, but that was a long time ago. Could someone point me to some info on the process?
Thanks!
Just search the HD2 forums for boot screens ....
Also sometimes called bios screens ...
Yes to change the first screen you have to flash ...
the second and third you can change from inside the phone ...
There are apps that let you do it ...
JMWD Icon Changer has a utility to change the animated and static screens, the ones after the boot ...
watcher64 said:
Just search the HD2 forums for boot screens ....
Also sometimes called bios screens ...
Yes to change the first screen you have to flash ...
the second and third you can change from inside the phone ...
There are apps that let you do it ...
JMWD Icon Changer has a utility to change the animated and static screens, the ones after the boot ...
Click to expand...
Click to collapse
Thanks for clearing that up for me!
there can actually be two before the animated windows one. The first one for 5 seconds, then the second when teh RGD screen comes up, then the anuimation, then the welcomehead.192
You can make your own, too, and they flash just like radios or roms.
http://forum.xda-developers.com/showthread.php?p=6528263#post6528263
samsamuel said:
there can actually be two before the animated windows one. The first one for 5 seconds, then the second when teh RGD screen comes up, then the anuimation, then the welcomehead.192
You can make your own, too, and they flash just like radios or roms.
http://forum.xda-developers.com/showthread.php?p=6528263#post6528263
Click to expand...
Click to collapse
Well Yeah, true, but was trying to keep it simple ....
But it can be fun to us slightly different ones for those first two ....
watcher64 said:
But it can be fun to us slightly different ones for those first two ....
Click to expand...
Click to collapse
heh, yea. I have a 'reward if found' and email/phone number message on my 2nd screen.
samsamuel said:
there can actually be two before the animated windows one. The first one for 5 seconds, then the second when teh RGD screen comes up, then the anuimation, then the welcomehead.192
You can make your own, too, and they flash just like radios or roms.
http://forum.xda-developers.com/showthread.php?p=6528263#post6528263
Click to expand...
Click to collapse
Can you change the stupid "Stick Together" screen w/o a custom ROM?
mfrey0118 said:
Can you change the stupid "Stick Together" screen w/o a custom ROM?
Click to expand...
Click to collapse
did you read the linked thread? the splashscreen is completely independant of the rom.
Its like the radio, you flash it seperately.
samsamuel said:
did you read the linked thread? the splashscreen is completely independant of the rom.
Its like the radio, you flash it seperately.
Click to expand...
Click to collapse
Here is what i have learned.
A ROM flash is a process that can be used to change three things on your phone.
1. The boot screen ( stick together )
2. The operating system and default software (this is what most people consider a rom flash)
3. the software that controls the radio (wireless) functions.
A rom flash can change one, two, or all three of these things.
By following the instructions found in the links above, you create a rom flash that only changes 1. the boot screen and leaves 2. & 3. alone.
HTH
What is the file name for the orange "windows" screen?
Thanks for all the help everyone. No more "Stick Together"! Here's my new boot screen... my company logo.
Jimmmycrackcorn said:
What is the file name for the orange "windows" screen?
Click to expand...
Click to collapse
It's either welcomehead.png or welcomehead.192.png I think. I don't have a standard rom so I'm not sure which it is. If there's animation in it, it's going to be a gif file.
watcher64 said:
Just search the HD2 forums for boot screens ....
Also sometimes called bios screens ...
Yes to change the first screen you have to flash ...
the second and third you can change from inside the phone ...
There are apps that let you do it ...
JMWD Icon Changer has a utility to change the animated and static screens, the ones after the boot ...
Click to expand...
Click to collapse
i have the energy rom with advanced config. is it possible to just find the boot screen, put it in my sd card, and change to it in the advanced config???? or do i HAVE to flash it to my device??
shinmasterx said:
i have the energy rom with advanced config. is it possible to just find the boot screen, put it in my sd card, and change to it in the advanced config???? or do i HAVE to flash it to my device??
Click to expand...
Click to collapse
Yes. The boot screen can only be changed by flashing it. The instruction and links in this thread walk you through it step by step. As someone who has just learned the process himself, I can say that it is not nearly as daunting as it first appears.
Give it a try.