Related
I was wondering if anybody here had the same combination and wanted to share the experiences.
My only problem is that the steering wheel button that is used to make, answer and end a call doesn’t support the press and hold option for activating the voice dial.
Wanted to know whether there is workaround for this.
Thnx
No1?
being an off-road vehicle, have you found a good solid holder for the universal for when you are on steep inclines or bumpy fields?
Re: BMW X3 with BMW BlueTooth+JasJar? (or any other BMW with
zormic said:
I was wondering if anybody here had the same combination and wanted to share the experiences.
My only problem is that the steering wheel button that is used to make, answer and end a call doesn’t support the press and hold option for activating the voice dial.
Wanted to know whether there is workaround for this.
Thnx
Click to expand...
Click to collapse
I also have a problem with getting the voice dial to work on my 320d (new E90 shape).
I have not been able to synchronise my phonebook from my JASJAR to my car. Do I need to copy the entries to my SIM to get that to work?
Thanks
joebongo said:
being an off-road vehicle, have you found a good solid holder for the universal for when you are on steep inclines or bumpy fields?
Click to expand...
Click to collapse
Yes, I have found it, leather case on my belt or in my pocket… :wink:
Re: BMW X3 with BMW BlueTooth+JasJar? (or any other BMW with
ChristelleJvR said:
zormic said:
I was wondering if anybody here had the same combination and wanted to share the experiences.
My only problem is that the steering wheel button that is used to make, answer and end a call doesn’t support the press and hold option for activating the voice dial.
Wanted to know whether there is workaround for this.
Thnx
Click to expand...
Click to collapse
I also have a problem with getting the voice dial to work on my 320d (new E90 shape).
I have not been able to synchronise my phonebook from my JASJAR to my car. Do I need to copy the entries to my SIM to get that to work?
Thanks
Click to expand...
Click to collapse
I tried copying the entries to my SIM card but it didn’t result with syncing phonebook with the car.
About voice dial on the steering wheel, well, what is puzzling me is the fact that the button works perfectly as VOICE DIAL/CONNECT/DISCONNECT/REDIAL button on most of the Nokias that I tried to pair with BMW. :x
I am using Nokia’s BT headset HDW-3 with my JJ and it has only one button for operating the phone with different PRESS/PRESS&HOLD/DOUBLE PRESS combinations and it initiates the voice dial without any problems with PRESS&HOLD.
I repeat the button on steering wheel is behaving like that with Nokia telephones (the same thing PRESS&HOLD) but with not with JJ. It just redials or disconnects active conversation. :?
Is it the same on yours?
Lets invite others to share experience with other cars… although BMW BT is very challenging for every mobile phone, it is very unfriendly…
Re: BMW X3 with BMW BlueTooth+JasJar? (or any other BMW with
[quote="zormic]I repeat the button on steering wheel is behaving like that with Nokia telephones (the same thing PRESS&HOLD) but with not with JJ. It just redials or disconnects active conversation. :?
Is it the same on yours?
Lets invite others to share experience with other cars… although BMW BT is very challenging for every mobile phone, it is very unfriendly…[/quote]
I have not tried it with other phones, but it behaves the same way with my JJ. I started thinking it was because I'm blonde...
Update: (maybe it will be useful to someone)
After updating JJ with latest i-mate ROM the cars BT is able to read the phonebook from JJ. It can read both from the SIM card as well as from telephone memory.
Unfortunately, the issue with voice dial button persists...
I am also having trouble using my BT headset to voice dial (not car related).
See post: http://forum.xda-developers.com/viewtopic.php?t=50138
/Mad
The same thing here and it is definitely the problem of new ROM. Before that my headset speed dialing from my Jabra 800 was flawless...
You win some, you lose some with Win mobile updates...
I have simialr issue with my Audi A4 with in built BT device, the voice dial is particularly sh1t, and activates at the end of voice calls
Tried a number of different ROMs and the experience is the same :x
Lord Buckingham said:
I have simialr issue with my Audi A4 with in built BT device, the voice dial is particularly sh1t, and activates at the end of voice calls
Tried a number of different ROMs and the experience is the same :x
Click to expand...
Click to collapse
I can direct you to this forum where there is a person claiming that after update of ROM hi Audi has all the functions. Check it out...
http://www.x3world.com/bluetooth/57...es-phonebook-transfer-2.html?highlight=jasjar
you may also find this thread usefull....
http://forum.xda-developers.com/viewtopic.php?t=48916
I work for a BMW dealer but havent tried pairing my Wizard...will try it on my bosses new 330i.
also the bmw page that confirms the divices tried and tested by BMW to work with their cars....as you will see, no latest phones...and no WM phones.
still, some phones do work, but dont allow phone book transfer to the car...others dont work at all....
and incase anyone was wondering, BMW's do not support bluetooth stereo...so we cant beam music from the phone to the car
please ask any questions...i will try and answer them.
minty1978 said:
you may also find this thread usefull....
http://forum.xda-developers.com/viewtopic.php?t=48916
I work for a BMW dealer but havent tried pairing my Wizard...will try it on my bosses new 330i.
also the bmw page that confirms the divices tried and tested by BMW to work with their cars....as you will see, no latest phones...and no WM phones.
still, some phones do work, but dont allow phone book transfer to the car...others dont work at all....
and incase anyone was wondering, BMW's do not support bluetooth stereo...so we cant beam music from the phone to the car
please ask any questions...i will try and answer them.
Click to expand...
Click to collapse
I have X5 with BT and HTC Wizard and having problem to even pairing it.
Can you, please let me know you results of trying to pair your Wizard with your boss's bmw?
PROFS OF THE XDA-WORLD, PLEASE HEEEEEEEEEEEEEEEEELP!
i have my htc tytn since 2 weeks. i connected my Samsung WEP-150 bluetooth headset (worked previously with Samsung tels, and qtek 9100). Now the issue is: after hard reset the headset works properly: push-beep-i say the name-he says the name and calls. And this is the last time it works until the next hard reset. The issu comes up with Nokia BH-200 headset too. The unit opens the audio gateway (can hear the noice), but closes it immediately, so i cant hear the beep, and say the name into the headset. If the unit is in my pocket, i cant say the name loud enough!
What i allready tried:
-upgrade to ext 106
-upgrade to jasjam 1.20...
-and with the original (ext 105) firmware the bttoggle prog.
The bttoggle (i red about it here) is a funny prog. Everybody wants to listen music on his unit, but i just wanted to use as designed. If i run the bttoggle 2 times (first is audio gateway on, second switches back to voice speed dial), the stuff works till the next softreset (or sometimes it loses the setup in suspend mode too).
Anyway, i think this is not good so.
PLESE HELP ME!!!
thx
peterke
PS: one more question: why is a com port in the headset profile there? is it useful? the dealer told me to switch it of, and only use the handsfree port.
sorry bout ur head set
I bought the same one that was already used but i cant activate it cuz i dont have the code,are they all the same code?were can i get the code to activate it ,do you know?i would appreciate the help if you have it!I know you said it sucks but i would still like to try it!
I'm having troubles getting my car stereo to work with my wizard. When I get an incomming call, most of the time it doesn't let the stereo know. It also seems to only send the bluetooth signal for a couple seconds, then off for a couple seconds. My rom doesn't have A2DP, do I need this or what's the deal. TIA
Try this file. I got it from this forum. I don't know what it does but it works for me. I have a Motorola BT car kit and i was having the same problem. Take off the .txt, put in \Windows\StartUp and soft reset.
On startup it just opens the text file in word. Is it supposed to do that?
GreggSymington said:
Try this file. I got it from this forum. I don't know what it does but it works for me. I have a Motorola BT car kit and i was having the same problem. Take off the .txt, put in \Windows\StartUp and soft reset.
Click to expand...
Click to collapse
On startup it just opens the text file in word. Is it supposed to do that?
Click to expand...
Click to collapse
that is why you take off the .txt part so it should be just exe at the end!!! Just read what was said!!! duh
Ok, so it did that but it didn't seem to fix it. I'm using molski's 2.26.10.2 rom. Anyone have any other ideas/ thanks
What stereo are you using? I just installed a Sony MEX-BT5000 in my car last weekend, and it works fine (at least in handsfree mode -- haven't tested A2DP yet) with my Wizard with the Qtek 2.17.7.2 ROM and the Tornado A2DP fix.
I have a pyle deck. The wierdest thing is that it sees the phone sometimes and not others. And the phone sees the deck as handsfree but won't use it.
Anyone know ???
So i was playing around with this supid thing today trying to get it work and i figured out that it will work...but every time i have to press "turn handsfree on". But my stereo still doesn't reconize when it's ringing. So i guess the problem is that my wizard won't remember to leave the handsfree on, is there an always on anywhere? Please help me
look around in the xizzard upgrading part of the forum..somewhere on the first 3 pages of threads theres one labeled somthing like " how to keep Bluetooth, GPRS, WiFi enabled while in standby" see what that has to say about it because it sounds to me like what i was going trough with one of my BT headsets when my 8125 would go into the standby mode
Tried that, it didn't fix anything
Dear experts!
I would like to route my tomtom voice instructions over bluetooth so they play through my car speakers (I have an integrated handsfree).
I seem to remember someone telling me this was possible a long long time ago but I cant find the thread (it wasnt on xdadev anyway).
Anyone know how to do this? I cant hear the instructions too well when the stereo is up!
Cheers
W
Think this will do it
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
warnysouth said:
Think this will do it
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
Click to expand...
Click to collapse
I used this on my motorbike for over a year to get the instructions/warnings into my helmets built in bluetooth. Highly recommended - worked perfectly!
Well it doesnt work for me. I click the btaudioon file and i hear a buzz over the handsfree but then the buzz stops and I dont get any new audio over the connection, just calls.
Anyway else had any problems?
W
It does not work
It does not work for me too...
I cannot get this thing to pair with the HD. the pass code of 0000 is not accepted. No pass code works on the first part but then the second part it will not allow me to leave the the pass code field blank. It fails every time.
Does anyone else use the I.Tech Clip D and how did you get it to pair?
I am using Dutty's 3.4 ROM on a Telestra 8285.
marksm said:
I cannot get this thing to pair with the HD. the pass code of 0000 is not accepted. No pass code works on the first part but then the second part it will not allow me to leave the the pass code field blank. It fails every time.
Does anyone else use the I.Tech Clip D and how did you get it to pair?
I am using Dutty's 3.4 ROM on a Telestra 8285.
Click to expand...
Click to collapse
Use pairing code 8888
Go through the user manual of your BT headset.
It will have some options for A2DP pairing - e.g. Press and Hold a button till indicator light changes (e.g Jabra has this). Now with the BT headset in A2DP pairing mode, pair it with your HD.
(First delete(clear) all pairing from your headset and also HD if above still doesn't work)
custardo01 said:
Use pairing code 8888
Click to expand...
Click to collapse
Thank you, thank you, thank you....
(iTech clip R35)
brgds
Royan
custardo01 said:
Use pairing code 8888
Click to expand...
Click to collapse
Thank You VERY much. I looked through the manual and I either overlooked that or it isn't in there. It is working now. Thanks.
the code is in the manual.... i had to d/l a version the other day as i couldnt remember the code
fards said:
the code is in the manual.... i had to d/l a version the other day as i couldnt remember the code
Click to expand...
Click to collapse
That's what I did for the Clip R35, but the manual said default code was '0000'. The real default code was '8888'...
brgds
Royan
watch for external gps com port reservation!
I searched the forum because i thought i have forgotten the passcode but after various attempts with 0000 and 8888 i found out that was the external gps reservation of com port 6,7. Set external gps com port to none fixed the problem ant d-radio is now connected.
Hope this helps someone.