How to enable automatic MMS connection? - Networking

How do I enable an automatic MMS connection instead of the following confirmation notification?
In order to send/download MM messages the current active connection may closed (this may affect other applications in use) Do you want to continue?
Click to expand...
Click to collapse
I use internet3.voicestream.com for data and wap.voicestream.com for MMS
Thanks for any help

tekknogenius said:
How do I enable an automatic MMS connection instead of the following confirmation notification?
I use internet3.voicestream.com for data and wap.voicestream.com for MMS
Thanks for any help
Click to expand...
Click to collapse
Look in the registry for this key:
HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI
Check these values:
"PromptForActiveConnection"=dword:00000000
"HideNotification"=dword:00000001

j.vd.spank said:
Look in the registry for this key:
HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI
Check these values:
"PromptForActiveConnection"=dword:00000000
"HideNotification"=dword:00000001
Click to expand...
Click to collapse
Thank you. Ignore the PM I sent you the other day asking for this same thing. Thank you again.

Related

I figured out T-Mobile MMS Problem. Here r correct setttings

After weeks of trying to figure this out here are the correct settings!!
1 Under My Work Network, select (Add a new modem connection)
2 Enter a name for your connection; I used (MMS)
3 From the Select a modem drop down choose Cellular Line (GPRS)
4 Tap Next
5 In the text box labeled (Access point name) type in wap.voicestream.com
6 Tap Next
7 Leave the User name, Password, and Domain fields blank
8 Tap Finish
9 Tap the Proxy Settings tab
10 Place a check in both boxes
11 Leave (Proxy server) blank
12 Tap Advanced
13 Leave HTTP and Socks Server fields blank.
14 Enter 216.155.165.050 for your WAP server. Port # is 9201
15 Enter 216.155.165.050 for your Secure WAP server. Port # is 9201
16 Tap OK twice
Now go to your MMS program and set it up, create a new server and I called mine T-Zones. Here are those settings.
Server Name: T-Zones
Gateway: 216.155.165.050
Server Address: http://216.155.174.84/servlets/mms
Tap ok
Now go to preferences and enter these settings,
Connect Via: My Work Network
Connect to Server: T-Zones
(check the box to retrieve messages immediately)
And it should work.
Enjoy!
Nice job, can you send?
I'll also give this settings a try under ezWAP 2.5 and see if they work with
it.
Qman said:
Nice job, can you send?
I'll also give this settings a try under ezWAP 2.5 and see if they work with
it.
Click to expand...
Click to collapse
yes it works on sending and recieving!
mlynch01 said:
Qman said:
Nice job, can you send?
I'll also give this settings a try under ezWAP 2.5 and see if they work with
it.
Click to expand...
Click to collapse
yes it works on sending and recieving!
Click to expand...
Click to collapse
You got PM, get back with me if you can! :lol:
Can;t seem to get this to work, did you do anything different with your GPRS settings?
I setup everything as stated, but it never is able to download or send messages, although it does download the subject.
G
well now i have 2 connections called "gprs" when i tap the connect icon in the top bar.
can i delete my original one and use this MMS one always (for sending MMS, for web browsing, etc etc)?
thanks,
arebelspy
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
arebelspy said:
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
Click to expand...
Click to collapse
What MMS program are you using?
Also is there an option/setting for
"Sender address type:" in this program?
If so what do you have it set to?
Also is there a setting for the "Sender address"?
If so what do you have it set as?
HTH
Re: I figured out T-Mobile MMS Problem. Here r correct settt
mlynch01 said:
After weeks of trying to figure this out here are the correct settings!!
Click to expand...
Click to collapse
Thanks alot! Now it works with the Norwegian Telenor (just changing IP and APN). Saved me plenty of time!
Qman said:
arebelspy said:
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
Click to expand...
Click to collapse
What MMS program are you using?
Also is there an option/setting for
"Sender address type:" in this program?
If so what do you have it set to?
Also is there a setting for the "Sender address"?
If so what do you have it set as?
HTH
Click to expand...
Click to collapse
Yes what device and MMS program are you guys using? I am using I-mate on T-Mobile USA. Also please remember in order for you to get this to work u have to have the feature enabled on your accounts. The program I am using is Arcsofts MMS program which comes instaled on the device.
Re: I figured out T-Mobile MMS Problem. Here r correct settt
Merc said:
mlynch01 said:
After weeks of trying to figure this out here are the correct settings!!
Click to expand...
Click to collapse
Thanks alot! Now it works with the Norwegian Telenor (just changing IP and APN). Saved me plenty of time!
Click to expand...
Click to collapse
Merc, I am glad I could be of some help.
I am using the built in MMS prog. on the iMate.
I have MMS enabled on my account, I can receive the message header
but I can never download, sending seems to work, but they never get delivered.
Any ideas?
Guardian
mlynch01 said:
Qman said:
arebelspy said:
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
Click to expand...
Click to collapse
What MMS program are you using?
Also is there an option/setting for
"Sender address type:" in this program?
If so what do you have it set to?
Also is there a setting for the "Sender address"?
If so what do you have it set as?
HTH
Click to expand...
Click to collapse
Yes what device and MMS program are you guys using? I am using I-mate on T-Mobile USA. Also please remember in order for you to get this to work u have to have the feature enabled on your accounts. The program I am using is Arcsofts MMS program which comes instaled on the device.
Click to expand...
Click to collapse
I'm using the i-mate on t-mobile with the default program built in as well.
I don't see "Sender address type:" or "Sender address".. where is this and what should it be set to?
-arebelspy
Sender address should be set to Phone Number and Sender address should be your 10 digit mobile number. So check these settings where ever they maybe.
HTH

Picture Messaging w/ a wizard? Why won't it work?

I have an MDA that will not send picture messages. Text messages work fine, but I've tried all the ways to send picture messages and I can't get picture messages to work!
Specs: T-Mobile MDA. I did the soft-reset trick to keep the customizations from loading. I then ran the cab file I found here to restore the MMS settings.
Server Name:T-Mobile MMSC
Gateway: 216.155.165.50
Port: 9201
Server: http://216.155.174.84/servlets/mms
Connect Via: My Work Network <---- I don't have a data plan, but I do have a text messaging package from Tmo that apparently includes picture messaging. Is this my issue??
Sending Size Limitation: 100k
WAP Version: 1.2
Booger said:
I have an MDA that will not send picture messages. Text messages work fine, but I've tried all the ways to send picture messages and I can't get picture messages to work!
Click to expand...
Click to collapse
Booger said:
I have an MDA that will not send picture messages. Text messages work fine, but I've tried all the ways to send picture messages and I can't get picture messages to work!
Click to expand...
Click to collapse
I have the K-Jam with a Tmo plan and I have wondered about the same thing.
You can only send MMS messages through the wap APN. Thus, you must create a dialing connection to wap.voicestream.com and then specify the MMS connection to connect via that APN.
JonnoB said:
You can only send MMS messages through the wap APN. Thus, you must create a dialing connection to wap.voicestream.com and then specify the MMS connection to connect via that APN.
Click to expand...
Click to collapse
Ok..so my next question is obviously HOW? Any advice you can provide would be appreciated.
Booger said:
JonnoB said:
You can only send MMS messages through the wap APN. Thus, you must create a dialing connection to wap.voicestream.com and then specify the MMS connection to connect via that APN.
Click to expand...
Click to collapse
Ok..so my next question is obviously HOW? Any advice you can provide would be appreciated.
Click to expand...
Click to collapse
Go to Settings, Connections tab.
Select Connections
Under 'My ISP' select 'Add new connection'
For name, select T-Mobile WAP
For modem, select Cellular Line (GPRS)
Click Next
For Access point name, enter 'wap.voicestream.com'
Click next
Leave all fields (user name, etc) blank
Click Finish
Go to Messaging applet
Click MMS Configuration on Menu
Select Servers tab
If you have not already entered the T-Mobile server, do it now. (covered in other thread)
Under Connect via: drop down, select 'My ISP'
Click OK
Send an MMS message.
Also, if you have a T-Mobile family plan as I do, right now you can get unlimited messaging (text messaging, mms, etc) for 9.99/month. Our family shares a plan with 4 phones (two teenage daughters). That comes to 2.50 per phone for unlimited messaging. The best deal I know right now!
JonnoB,
Thanks for the help. Unfortunately, picture messaging still doesn't work. Since MMS requires transmittal over a GPRS connection, wouldn't that imply that you must have a data plan to use it?
I did exactly as outlined in your post and my phone even says "T-Mobile WAP (GPRS) Connected". However, I have no IE or picture messaging functionality. Thanks again for your input.
Booger said:
Since MMS requires transmittal over a GPRS connection, wouldn't that imply that you must have a data plan to use it?
Click to expand...
Click to collapse
Yes, I think it does require some sort of plan. At least T-Zones because while the message is received via SMS, the rest of the data is downloaded from the WAP server afterward. If MMS is important to you, you should consider the $20 unlimited plan for data... or if you find yourself in hot spots, the $30 plan which includes unlimited wifi as well.
Oddly enough, T-Mobile customer care claims that a data plan is not required for MMS. Their solution was to hard reset the device. I'm not sure I want to hard reset with all the T-Mobile bloatware.

[T-Mobile US MDA] manual MMS setting with official ROM 2.26

I have problem configuring MMS manually
with old 1.08 ROM, I could add MMS service manually
but now with 2.26, new servers and set as default are greyed out
how can I enable them?
Re: [T-Mobile US MDA] manual MMS setting with official ROM 2
mingkee said:
I have problem configuring MMS manually
with old 1.08 ROM, I could add MMS service manually
but now with 2.26, new servers and set as default are greyed out
how can I enable them?
Click to expand...
Click to collapse
I have the same problem here. I was trying to workaround problem by manually editing settings in registry, but it did not work for me.
You can try to edit settings to match your network, by going to key:
HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test
I modified to match my provider but still no luck. Phone did connect to via GPRS but it doesn't send any MMS.
Has anybody found a way to configure MMS?
Could somebody try to reverse engineer registry settings for MMS and show us how to configure it?
Check that HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test\ConnectionVia value matches HKLM\Comm\ConnMgr\Destinations\YOURE_ACCAOUNT_NAME\DestId?
i tried both and no result
zoki said:
Check that HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test\ConnectionVia value matches HKLM\Comm\ConnMgr\Destinations\YOURE_ACCAOUNT_NAME\DestId?
Click to expand...
Click to collapse
I checked it and everything is OK, however I still cannot send MMS.
According to my provider I should set WAP Version to 1.2,
Do you know what is appropriate value of HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test\WAPType for 1.2 wap version ( I assume that this is appropriate key for WAP Version)?
Here are current settings I have for my provider (HR VIP):
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test]
"ConnectionVia"="{B0FC015F-F12A-0D4D-9A42-B0D03CE50FB8}"
"Gateway"="212.91.99.91"
"GatewayPort"=dword:9201l
"MmscURI"="http://mms.vipnet.hr/servlets/mms"
"Name"="VIP MMS"
"RecvDefault"=dword:512000l
"SendDefault"=dword:307200l
"WAP1DefaultSize"=dword:307200l
"WAP2DefaultSize"=dword:307200l
"WAPType"=dword:1l
Click to expand...
Click to collapse
mdm said:
Do you know what is appropriate value of HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test\WAPType for 1.2 wap version ( I assume that this is appropriate key for WAP Version)?
Here are current settings I have for my provider (HR VIP):
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test]
"ConnectionVia"="{B0FC015F-F12A-0D4D-9A42-B0D03CE50FB8}"
"Gateway"="212.91.99.91"
"GatewayPort"=dword:9201l
"MmscURI"="http://mms.vipnet.hr/servlets/mms"
"Name"="VIP MMS"
"RecvDefault"=dword:512000l
"SendDefault"=dword:307200l
"WAP1DefaultSize"=dword:307200l
"WAP2DefaultSize"=dword:307200l
"WAPType"=dword:1l
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Setting WAPType to dword:0 solved my problem... I am able to send and receive MMS-es. I also think that max sizes of messages is too high, but I did not test it. I think it should be OK unless you try to send messages bigger than your network allows.
mingkee said:
but now with 2.26, new servers and set as default are greyed out
how can I enable them?
Click to expand...
Click to collapse
Did anyone ever find the way to make these options available?
In your registry goto:
HKLM/SOFTWARE/Arcsoft/ArcSoft MMS AU/Config/UI
There you will find a key called "EnableServerEdit" set it to 1 and you will be able to edit the server settings.

T-Mobile US MMS ISSUE

When I try to send MMS, it shows that it goes either to 99 or 100% but then stays in the outbox with the clock next to it...
And I also realized that I can receive, but not send... anyone know why?
Using Faria 3.3 ROM, ArcSoft 3.5, everything is configured right according to T-Mobile. I'm about to start ripping my nails out! It seems that some others had the same issue but no solution. Ugh...
HEEEELP!
herzzreh said:
When I try to send MMS, it shows that it goes either to 99 or 100% but then stays in the outbox with the clock next to it...
And I also realized that I can receive, but not send... anyone know why?
Using Faria 3.3 ROM, ArcSoft 3.5, everything is configured right according to T-Mobile. I'm about to start ripping my nails out! It seems that some others had the same issue but no solution. Ugh...
HEEEELP!
Click to expand...
Click to collapse
TMo's configuration is incorrect. Check the Wiki, solution is there.
--M
demontefixo said:
TMo's configuration is incorrect. Check the Wiki, solution is there.
--M
Click to expand...
Click to collapse
Oh... that? I knew about it, I don't have a 0, still doesn't work.
herzzreh said:
Oh... that? I knew about it, I don't have a 0, still doesn't work.
Click to expand...
Click to collapse
hmm. Post your settings then, we'll go from there.
--M
Fix...
Try this ninja magic...
In the messaging app, select :
Menus / Tools / Options
Select MMS
Select the "Servers" tab
Finally set T-Mobile as Default
We'll have try some more ninja magic if you don't have a T-Mobile Option.
Settings are exactly off the T-Mo configurator, except for the 0...
One thing... I'm not using the proxy, could this be the issue?
[edit] Doesn't work even with a proxy.
herzzreh I Had The Same Problem I Had To Create A New MMS Configuration And Put The Following:
Server Name: PictureMessaging
Gateway:216.155.165.50
Port Number: 8080
Server Address: http://216.155.174.84/servlets/mms
Connect Via: The Internet
Sending Size Limiation: 300k
WAP Version: WAP 2.0
Then Make That New File You Created As Your Default.
And Also Make Sure Your Connection Is T-Mobile GPRS (wap.voicestream.com)
Hope That Could Help

[Q] MMS not configured?

Do we need to run the connectionsetup.xap to configure the MMS settings? I entered the APN settings but I can't send pictures text.
What is your APN?
I used epc.t-mobile.com
user: blank pw: blank
I can send/receive MMS and texts
s0nniez said:
What is your APN?
I used epc.t-mobile.com
user: blank pw: blank
I can send/receive MMS and texts
Click to expand...
Click to collapse
I'll give that one a try... i had used wap.voicestream.com
someeh said:
I'll give that one a try... i had used wap.voicestream.com
Click to expand...
Click to collapse
ok so that one doesn't work for me either, am I suppose to soft reset?
run the connection xap
i had same problem and it fixed it
savage25rcracer said:
run the connection xap
i had same problem and it fixed it
Click to expand...
Click to collapse
Thanks... that is what I ended up doing, I'm good to go now

Categories

Resources