I have problem configuring MMS manually
with old 1.08 ROM, I could add MMS service manually
but now with 2.26, new servers and set as default are greyed out
how can I enable them?
Re: [T-Mobile US MDA] manual MMS setting with official ROM 2
mingkee said:
I have problem configuring MMS manually
with old 1.08 ROM, I could add MMS service manually
but now with 2.26, new servers and set as default are greyed out
how can I enable them?
Click to expand...
Click to collapse
I have the same problem here. I was trying to workaround problem by manually editing settings in registry, but it did not work for me.
You can try to edit settings to match your network, by going to key:
HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test
I modified to match my provider but still no luck. Phone did connect to via GPRS but it doesn't send any MMS.
Has anybody found a way to configure MMS?
Could somebody try to reverse engineer registry settings for MMS and show us how to configure it?
Check that HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test\ConnectionVia value matches HKLM\Comm\ConnMgr\Destinations\YOURE_ACCAOUNT_NAME\DestId?
i tried both and no result
zoki said:
Check that HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test\ConnectionVia value matches HKLM\Comm\ConnMgr\Destinations\YOURE_ACCAOUNT_NAME\DestId?
Click to expand...
Click to collapse
I checked it and everything is OK, however I still cannot send MMS.
According to my provider I should set WAP Version to 1.2,
Do you know what is appropriate value of HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test\WAPType for 1.2 wap version ( I assume that this is appropriate key for WAP Version)?
Here are current settings I have for my provider (HR VIP):
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test]
"ConnectionVia"="{B0FC015F-F12A-0D4D-9A42-B0D03CE50FB8}"
"Gateway"="212.91.99.91"
"GatewayPort"=dword:9201l
"MmscURI"="http://mms.vipnet.hr/servlets/mms"
"Name"="VIP MMS"
"RecvDefault"=dword:512000l
"SendDefault"=dword:307200l
"WAP1DefaultSize"=dword:307200l
"WAP2DefaultSize"=dword:307200l
"WAPType"=dword:1l
Click to expand...
Click to collapse
mdm said:
Do you know what is appropriate value of HKLM\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test\WAPType for 1.2 wap version ( I assume that this is appropriate key for WAP Version)?
Here are current settings I have for my provider (HR VIP):
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\test]
"ConnectionVia"="{B0FC015F-F12A-0D4D-9A42-B0D03CE50FB8}"
"Gateway"="212.91.99.91"
"GatewayPort"=dword:9201l
"MmscURI"="http://mms.vipnet.hr/servlets/mms"
"Name"="VIP MMS"
"RecvDefault"=dword:512000l
"SendDefault"=dword:307200l
"WAP1DefaultSize"=dword:307200l
"WAP2DefaultSize"=dword:307200l
"WAPType"=dword:1l
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Setting WAPType to dword:0 solved my problem... I am able to send and receive MMS-es. I also think that max sizes of messages is too high, but I did not test it. I think it should be OK unless you try to send messages bigger than your network allows.
mingkee said:
but now with 2.26, new servers and set as default are greyed out
how can I enable them?
Click to expand...
Click to collapse
Did anyone ever find the way to make these options available?
In your registry goto:
HKLM/SOFTWARE/Arcsoft/ArcSoft MMS AU/Config/UI
There you will find a key called "EnableServerEdit" set it to 1 and you will be able to edit the server settings.
Related
After weeks of trying to figure this out here are the correct settings!!
1 Under My Work Network, select (Add a new modem connection)
2 Enter a name for your connection; I used (MMS)
3 From the Select a modem drop down choose Cellular Line (GPRS)
4 Tap Next
5 In the text box labeled (Access point name) type in wap.voicestream.com
6 Tap Next
7 Leave the User name, Password, and Domain fields blank
8 Tap Finish
9 Tap the Proxy Settings tab
10 Place a check in both boxes
11 Leave (Proxy server) blank
12 Tap Advanced
13 Leave HTTP and Socks Server fields blank.
14 Enter 216.155.165.050 for your WAP server. Port # is 9201
15 Enter 216.155.165.050 for your Secure WAP server. Port # is 9201
16 Tap OK twice
Now go to your MMS program and set it up, create a new server and I called mine T-Zones. Here are those settings.
Server Name: T-Zones
Gateway: 216.155.165.050
Server Address: http://216.155.174.84/servlets/mms
Tap ok
Now go to preferences and enter these settings,
Connect Via: My Work Network
Connect to Server: T-Zones
(check the box to retrieve messages immediately)
And it should work.
Enjoy!
Nice job, can you send?
I'll also give this settings a try under ezWAP 2.5 and see if they work with
it.
Qman said:
Nice job, can you send?
I'll also give this settings a try under ezWAP 2.5 and see if they work with
it.
Click to expand...
Click to collapse
yes it works on sending and recieving!
mlynch01 said:
Qman said:
Nice job, can you send?
I'll also give this settings a try under ezWAP 2.5 and see if they work with
it.
Click to expand...
Click to collapse
yes it works on sending and recieving!
Click to expand...
Click to collapse
You got PM, get back with me if you can! :lol:
Can;t seem to get this to work, did you do anything different with your GPRS settings?
I setup everything as stated, but it never is able to download or send messages, although it does download the subject.
G
well now i have 2 connections called "gprs" when i tap the connect icon in the top bar.
can i delete my original one and use this MMS one always (for sending MMS, for web browsing, etc etc)?
thanks,
arebelspy
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
arebelspy said:
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
Click to expand...
Click to collapse
What MMS program are you using?
Also is there an option/setting for
"Sender address type:" in this program?
If so what do you have it set to?
Also is there a setting for the "Sender address"?
If so what do you have it set as?
HTH
Re: I figured out T-Mobile MMS Problem. Here r correct settt
mlynch01 said:
After weeks of trying to figure this out here are the correct settings!!
Click to expand...
Click to collapse
Thanks alot! Now it works with the Norwegian Telenor (just changing IP and APN). Saved me plenty of time!
Qman said:
arebelspy said:
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
Click to expand...
Click to collapse
What MMS program are you using?
Also is there an option/setting for
"Sender address type:" in this program?
If so what do you have it set to?
Also is there a setting for the "Sender address"?
If so what do you have it set as?
HTH
Click to expand...
Click to collapse
Yes what device and MMS program are you guys using? I am using I-mate on T-Mobile USA. Also please remember in order for you to get this to work u have to have the feature enabled on your accounts. The program I am using is Arcsofts MMS program which comes instaled on the device.
Re: I figured out T-Mobile MMS Problem. Here r correct settt
Merc said:
mlynch01 said:
After weeks of trying to figure this out here are the correct settings!!
Click to expand...
Click to collapse
Thanks alot! Now it works with the Norwegian Telenor (just changing IP and APN). Saved me plenty of time!
Click to expand...
Click to collapse
Merc, I am glad I could be of some help.
I am using the built in MMS prog. on the iMate.
I have MMS enabled on my account, I can receive the message header
but I can never download, sending seems to work, but they never get delivered.
Any ideas?
Guardian
mlynch01 said:
Qman said:
arebelspy said:
bah i cant make it work either, it just says "sending" forever then times out..
-arebelspy
Click to expand...
Click to collapse
What MMS program are you using?
Also is there an option/setting for
"Sender address type:" in this program?
If so what do you have it set to?
Also is there a setting for the "Sender address"?
If so what do you have it set as?
HTH
Click to expand...
Click to collapse
Yes what device and MMS program are you guys using? I am using I-mate on T-Mobile USA. Also please remember in order for you to get this to work u have to have the feature enabled on your accounts. The program I am using is Arcsofts MMS program which comes instaled on the device.
Click to expand...
Click to collapse
I'm using the i-mate on t-mobile with the default program built in as well.
I don't see "Sender address type:" or "Sender address".. where is this and what should it be set to?
-arebelspy
Sender address should be set to Phone Number and Sender address should be your 10 digit mobile number. So check these settings where ever they maybe.
HTH
I have a T-mobile US wizard and I try to set up a new MMS account (OrangeIL). My wizard is sim free and I can connect to GPRS. The problem is that when I go to the MMS configuration window in the MMS program, I can't delete or edit "T-Mobile MMS" or create a new one in the "servers" tab. What sould I do?
i got the same problem
help please
i cant setup a new mms account.
Aviv said:
I have a T-mobile US wizard and I try to set up a new MMS account (OrangeIL). My wizard is sim free and I can connect to GPRS. The problem is that when I go to the MMS configuration window in the MMS program, I can't delete or edit "T-Mobile MMS" or create a new one in the "servers" tab. What sould I do?
Click to expand...
Click to collapse
You have to change the following registry keys:
RegEdit to Allow change of MMS:
HKLM\Software\Arcsoft\Arcsoft MMS UA\Config\UI\EnableServerEdit
Change value to 1.
Problem solved, THANKS!
When I try to send MMS, it shows that it goes either to 99 or 100% but then stays in the outbox with the clock next to it...
And I also realized that I can receive, but not send... anyone know why?
Using Faria 3.3 ROM, ArcSoft 3.5, everything is configured right according to T-Mobile. I'm about to start ripping my nails out! It seems that some others had the same issue but no solution. Ugh...
HEEEELP!
herzzreh said:
When I try to send MMS, it shows that it goes either to 99 or 100% but then stays in the outbox with the clock next to it...
And I also realized that I can receive, but not send... anyone know why?
Using Faria 3.3 ROM, ArcSoft 3.5, everything is configured right according to T-Mobile. I'm about to start ripping my nails out! It seems that some others had the same issue but no solution. Ugh...
HEEEELP!
Click to expand...
Click to collapse
TMo's configuration is incorrect. Check the Wiki, solution is there.
--M
demontefixo said:
TMo's configuration is incorrect. Check the Wiki, solution is there.
--M
Click to expand...
Click to collapse
Oh... that? I knew about it, I don't have a 0, still doesn't work.
herzzreh said:
Oh... that? I knew about it, I don't have a 0, still doesn't work.
Click to expand...
Click to collapse
hmm. Post your settings then, we'll go from there.
--M
Fix...
Try this ninja magic...
In the messaging app, select :
Menus / Tools / Options
Select MMS
Select the "Servers" tab
Finally set T-Mobile as Default
We'll have try some more ninja magic if you don't have a T-Mobile Option.
Settings are exactly off the T-Mo configurator, except for the 0...
One thing... I'm not using the proxy, could this be the issue?
[edit] Doesn't work even with a proxy.
herzzreh I Had The Same Problem I Had To Create A New MMS Configuration And Put The Following:
Server Name: PictureMessaging
Gateway:216.155.165.50
Port Number: 8080
Server Address: http://216.155.174.84/servlets/mms
Connect Via: The Internet
Sending Size Limiation: 300k
WAP Version: WAP 2.0
Then Make That New File You Created As Your Default.
And Also Make Sure Your Connection Is T-Mobile GPRS (wap.voicestream.com)
Hope That Could Help
How do I enable an automatic MMS connection instead of the following confirmation notification?
In order to send/download MM messages the current active connection may closed (this may affect other applications in use) Do you want to continue?
Click to expand...
Click to collapse
I use internet3.voicestream.com for data and wap.voicestream.com for MMS
Thanks for any help
tekknogenius said:
How do I enable an automatic MMS connection instead of the following confirmation notification?
I use internet3.voicestream.com for data and wap.voicestream.com for MMS
Thanks for any help
Click to expand...
Click to collapse
Look in the registry for this key:
HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI
Check these values:
"PromptForActiveConnection"=dword:00000000
"HideNotification"=dword:00000001
j.vd.spank said:
Look in the registry for this key:
HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\UI
Check these values:
"PromptForActiveConnection"=dword:00000000
"HideNotification"=dword:00000001
Click to expand...
Click to collapse
Thank you. Ignore the PM I sent you the other day asking for this same thing. Thank you again.
I finally have my Atrix (and love it), however there is something I noticed today that did NOT work: I cannot receive or send MMS.
It seems that in their eagerness to lock it to AT&T, motorola have removed MMS settings from the messaging app, and have locked the MMS settings to use only AT&T. Which is a bit of a problem, with me being in Singapore.
I already tried doing the access point setup and everything, but it just will not work.
Has anybody else outside US got MMS to work for them? If yes, how?
Never mind guys, I solved it. For Singapore M1, the settings need to be as googled, with two APNs:
1) "sunsurf" (no mms settings!), APN type "default"
2) "miworld", APN type "mms"
It seems the phone switches between the APNs for MMS sending / retrieval, which may take a few seconds. I thank m1 for their messed-up MMS settings... NOT.
orange swiss
Hi guy,
I tried the same with my carrier orange swiss and it doesn't work any idea why??
tonton_fred said:
Hi guy,
I tried the same with my carrier orange swiss and it doesn't work any idea why??
Click to expand...
Click to collapse
have you tried setting the APN type as "default,mms"? (Wihout the quotes, obviously)
*edit* from another forum ( http://forum.xda-developers.com/archive/index.php/t-625061.html ), it seems your settings should be:
1) apn internet
mcc 228
mnc 03
apn type: default
2) apn wap
proxi 192.168.010.002
port 8080
mcc 228
mnc 03
apn type: mms
i m trying now i will give u a feeedback asap
no. it doesn't work still searching....
Yeah, it surprised me that there is no MMS proxy or MMSC... there needs to be. Look at http://www.activexperts.com/xmstoolkit/mmsclist/ , maybe that helps?
>> MMSC http://192.168.151.3:8002 <<
I already tried all the possible combination for a correct apn make me crazy the only things now is trying to root the phone perhaps it helps
Sent from my MB860 using XDA App
no, i allready rootet the phone and it is not working.
I'm on Swisscom.
I try Go SMS with the extra settings for MMS ... nope, not working :-(
The MMS is basically setup via APNs. The MMS settings there (MMS center, MMS proxy, etc.) need to be correct. For me, there even need to be two separate APNs for MMS and web. You could ask your network provider to push them to your phone, maybe that helps. Just say you have an Android one.
I am sorry to hear it does not work for you guys in Switzerland. I am not there, so a bit limited what I can do...
No prob buddy thanks to help,
i do a second apn just for the mms but it was what i tried from the beginning... i don t know , this phone isn't be regonnized from orange to be set.... i don 't know.
And i m back in us so i must wait 2 months before trying a new solution but still thinking...
If you can post some picture of your phone setting nobody knows,
Ok one more possibility... GingerBlur comes with its own apns-conf.xml . You could try pushing that to your phone without installing gingerblur. Make sure you back the previous file up first, though!
yeah perhaps but i still locking deeper where att set the phone's apn not so much time this week but i m trying ...
hi i found sms and mms configuration, but becareful change will effect after restart the phone
and remember the permission file after change must be same as before
tool :
windows :
sqlite manager , i use sqlite admin
android:
root explorer
edit this file
/data/data/com.motorola.android.providers.settings/databases/settings.db
i change some value and help me to be able to sent mms
here what i change
sms_force_7bit_encoding = 0 <- this will enable more language i think, couz after i change this i be able to sent and receive chinese and japan language.
supl_pref_apn = indosatmms <- this apn title on apn setting , /still iam not sure what is the correct value, couz original value are empty
supl_carrier_settings_enabled = 0 <- this iam not sure , what i thought is it will auto configure mms / sms setting base on supl_* property
mms_x_wap_profile_url = http://uaprof.motorola.com/phoneconfig/MotoMB860/profile/MotoMB860.rdf
please correct me if iam wrong
thanks- hope it help