Hi All,
I tried to upgrade my device to WM 6.1 - I tried UDK\Bepe\Epimazzo and I got the same problem:
When I recive calls, I see that the antenna icon change to phone but no ringing - I can't answers the phone.
Another issue, I try to dial, I click on phone, the phone screen disappears and the Today screen appears again, I can't dial.
Another issue, If I have miss calls, I click on the miss call icon in the Today screen and nothing happened, I can't access to the miss calls list.
I had the 3G problem so I flushed Murata Radio on WM 6.1, and it didn't solved this problem...
I downgrade back to the original, and now I have again the 3G problem, low signal…
Any Idea ?
Thanks in advance...
Related
There seems to be a very annoying bug on my new XDAII that is running the 1.6O O2 ROM.
If I am on the phone and i receive a call that alerts me that there is a call is waiting, and I decline to answer it, the sound is cut off and I can't hear the caller anymore. Cancelling the current call and re-dialling is the only way of getting 'sound back'.
Furthtermore, another irritating bug is that if the phone rings and I answer after only 1-2 rings, I can't hear anything for a few seconds and have to wait those couple of seconds before i can speak to the other person. This doesn't seem to happen if the call is answered after 3-4 rings.
Any help would be appreciated.
Me too - only answer I found was to turn off call waiting.
Poor solution.
Same for me, i too had to turn off call waiting, however i found that if you are using a bluetooth headset when the second call comes in and you decline to answer it, it just transfers the current call the the phone and you can continue it there
Same problem here.
I find that if you put the call on hold and then resume - the voice will come back.
VERY irritating.
Same for me too, I have T-Mobile 1.60 and using BTHTools 1.1.0.0...
Do you use BTHTools?
yes l am using BT tools.
regards,
hasnain
I performed a hard reset...
Did NOT install BT Tools - and had the same problem.
Mine did this long before using BT tools also.
I also have the same problem....
Is it an incompatibility between the phone and Bt Tools?
Is there any solution other than turning off call waiting?
Does anyone face the 2nd problem that I mentioned:
Sometimes when I pick up the phone after it rings, it takes a couple of seconds before i can hear the caller. This happens more often when picking the phone up within 1 or 2 rings.
This problem was aroung in the I-mate ROM 1.66.
They fixed both with the 1.72 ROM.
ketinson said:
This problem was aroung in the I-mate ROM 1.66.
They fixed both with the 1.72 ROM.
Click to expand...
Click to collapse
i DON'T THINK THIS IS FIXED IN 1.72. i STILL HAVE THESE SAME PROBLEMS TOO, RUNNING t-MOBILE 1.72.
While running 1.60 I replaced the Radio Stack only with the O2 original release version - sorry don't remember version number - and it worked without these two very annoying bugs in the phone. i think it is a problem with the readio stack version only.
After losing the voice with an incoming call I can get the voice back without redialing by placing the call on hold and then resuming.
I have the same problems with or without bluetooth tools and with or without a BT headset.
Now, I have T-Mobile's 1.72 installed and am afraid to reload the working radio stack becasue of the "downgrade disaster" with 1.72. I am anxiously waiting for either a stable 1.72 or XDA Developers to help us out of this mess with this ****ty ROM.
This forum is fantastic. Thanks to everyone.
Steve
I had the problem in the 1.66 ROM, and no longer have it with 1.72!
I've just installed the new O2 1.72 ROM and am still having the same problem.
I am also suffering from a problem I was having on the old ROM. Many times when I receive a call and press the green answer button, it takes between 2-5 seconds for me to hear the person calling. The person calling also hears a similar period of slience before he/she can hear me.
The same thing also happens sometimes when I call out, where only once 2-3 rings into the call or if the other party has already picked up thephone can I hear or say something.
I'm not sure if caller ID or Photo ID has anything to do with it as I have around 1380 contacts on my xda.
This problem is extremely annoying and was wondering if there is anyone out there who has faced the problem and may have an answer for it.
Us too
We have two xda2 with 1.72, and same thing, there is a 5 second delay upon recieving any call, and sometimes there is a hangup duriong call waiting???
I never had that problem until I installed Bluetooth Tools...now it always happens. Though as someone's suggested, holding and resuming seems to do the trick.
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
I am getting really frustrated with this tytn rom 1.31.255.1 09/19/06 radio version 1.14.00.00.
Many times when I press the green dial button or the soft skin button to dial out the phone does not dial out ( makes some stupid sound ) and the number shows up as the last call number. This happens a lot. The phone shows dialling out but then cuts out.
Any ideas!!
Thanks
same here. But I'm in a UMTS migration area, and i think that has something to do with it. Used to be fine. even my old ipaq h6315 can get a fix on a signal where the tytn can't. and the ipaq was KNOWN for being a crappy phone.
I thought this was only a ROM issue as I was using a ROM that seemed to have many problems with it other than this, but when I changed to another ROM, the problem still persists.
The problem is that sometimes when I get incoming calls, the phone will just vibrate and crash with no backlight on the screen and only showing the Incoming Call bubble with the caller ID in it. I'm not exactly sure what the people calling receive, I think they just get silence, no ringing tone at all.
I'm wondering if anyone else has had this issue or if it's just me.
I also have this once in a while. Mostly, when I didn't reboot my Qtek for several days. The device freezes displaying the Incoming call bubble and it keeps vibrating until I reset it. I guess the caller gets the busy signal or gets re-routed to voicemail.
Cheers,
-mARKUS
the same here...sometimes freezes and show "incoming call" if i dont reset for few days.. i got used to that
same here. any idea for a solution?
poedgirl said:
I thought this was only a ROM issue as I was using a ROM that seemed to have many problems with it other than this, but when I changed to another ROM, the problem still persists.
The problem is that sometimes when I get incoming calls, the phone will just vibrate and crash with no backlight on the screen and only showing the Incoming Call bubble with the caller ID in it. I'm not exactly sure what the people calling receive, I think they just get silence, no ringing tone at all.
I'm wondering if anyone else has had this issue or if it's just me.
Click to expand...
Click to collapse
Hi
First of all wich ROM are you using that causes crash?
I had this issue in almost all ROM´s for UNI when I had installed HTC Home
Finally I tried Tomal´s v7.6 and all problems gone
Hope this helps
Cheers
orb3000 said:
Hi
First of all wich ROM are you using that causes crash?
I had this issue in almost all ROM´s for UNI when I had installed HTC Home
Finally I tried Tomal´s v7.6 and all problems gone
Hope this helps
Cheers
Click to expand...
Click to collapse
yea ur rite had this issue in tomals v7.6 also but when i uninstalled htc home it was ok after that.
Hi
Unsure if this points at a radio problem or not...
Installed LIA's v2.8 touch of glass ROM anda few tweaks on top - however when i make a phonecall the phone hangs - no soft or hard buttons work and i have to remove the battery.
I tried an incoming call - it rings but i cant hear anything - then same deal again, battery out etc...
The phone is on Orange UK (sim locked)
manila 2.5.2018
Radio 2.07.51.22_2
would a new radio fix this issue? Currently i can recieve and send texts but no phonecalls.
problem solved.
Flashed a new radio