Database Users

Is there a basic large PHONE pad available ?

Just wondering if there is a very basic phone pad skin available for the M3100...
Just a single line for the number, maybe 2 if the number is too long so the digits don't get too small...
Large buttons for numbers, no video buttons etc just numbers, no need for the TALK/END sort of stuff as the hardware green/red buttons work fine..
Just looking for something that people with wide fingers can use without a stylus....
If there isn't one, what do I need to do to create one ??
Searched the forum but can't really find anything of use on the subject.
Many thanks Phil

I found that the vista theme on Paulya.com worked wonders for this:
http://www.paulya.com/etenskins.htm
http://www.paulya.com/Projects/Eten_Skins/Vista/Vista_Trans/Vista_Trans_Origin.zip
I am tempted to go back to this dialer as it was so good on my Wizard - just lacks a video button.

Hi, Thanks for that.... Managed to get the skin to work that is included with the eten dialer... I also downloaded the eten_ans etc .zip and put it in the windows dir on the phone after extracting it.. can't seem to find how to enable it (am I thick or something... Don't answer that !!)
The only thing I didn't do was use active sync... I copied the extracted file to my memory card then copied them over from that as the PC I'm at, at the moment doesn't run activesync 4 or higher (horrible win98 se machine..
Any comments much appreciated
Phil

I jast ran the cab file from my storage card and it installed perfectly. I did have diffulculty installing additional skins though.

Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.

GavinN said:
Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.
Click to expand...
Click to collapse
Great - Any chance of a screenshot?

Have you guys seen Buzz's Virgy DeepOcean Dialer for WM5 QVGA?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://buzzdev.net/component/option,com_remository/func,fileinfo/id,335/
V

Hi sorry to be thick
ok i downloaded the buzzdev.net qvga dialer
but how does one install it. Do i just run the cab via activesync or run it on the vario2 or what sorry about the stupid questions
also i download the splash screen stuff from there too how do i make that appear instead of the default tmobile one when starting up
thanks
JEREMY

Just stick it onto your device, tap it to load it, install and then when prompted reboot (just hit OK and it'll do it) - the PIN entry screen remains the same, but the main dialer screen changes.
It looks very nice, and I'd use it all the time - except there's no way to use the T9 dialing feature which the regular dialer offers (where you can just type the name of the person you wish to call and it shows all valid entries from the list, so e.g. if I wanted to call my Mum - whose entry is Mum, ironically - I'd type 6-8-6 and then hit Dial). It's quite sad to see that this feature is missing, probably for a good reason as it does cause a fair bit of slowdown on my phone - more than on my old Alpine! - but I still use it all the time and I'm going to have to uninstall the skin because I really neeeeeeeeed that feature. :/

ok if I wanted to get the original tmobile dialer back then all I would have to do is uninstall it then? cool
how would I install the splash screen then?
Jeremy

Vijay55,
I installed it OK, the large buttons are awesome, however I have had the following problems:
1) DTMF (Tones) don't work properley when accessing voice mail etc (UK T-mobile) or any other press x application
2) Jog Dialer not active
3) No Smart dialling
Am I doing anything wrong?
Have had to pull it off becasue of the DTMF problem, I've installed it, removed it, rebooted, changed the options etc, nothing seems to fix it.

Fixed it!!
Though I am now using the Eten dialler with smart dial support and one of Paulya's Dark Blue Glass skins.
Editing the registry and setting the value to 0, then soft reboot and dtmf tones are working.
Setting it to 0 wasn't the obvious choice, and previously I hadn't soft rebooted.
Found the following from dhushy in:
http://forum.xda-developers.com/showthread.php?t=276700
Worked it out. For anyone with a similar problem, use the registry editor to locate the following key:
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x0 0010001,1
Change the value from 1 to a 0 and Bob's yer Uncle (for non-British readers that means everything will be cushty - see Only Fools and Horses for a contextual translation)
Did this and I was able to manipulate my voicemail messages as normal.
Click to expand...
Click to collapse
I am on T-Mobile UK.

New Dialpad Skin...

I've just finished up my new dialpad skin. Check it out here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ryan

neonstorm said:
I've just finished up my new dialpad skin.
Click to expand...
Click to collapse
Looks good Kudos

Great Skin...!
But not Support Dialer Button...

Thanks for the compliments!
tom_codon said:
Great Skin...!
But not Support Dialer Button...
Click to expand...
Click to collapse
Dialer Button? Can you elaborate on which button?
So far as I can tell, everything works fine on my Wing.
And SmartDial still works!!
This is basically the dialpad another member pulled from the Touch. I just reworked all of the graphics...
On a side note, if anyone wants a different background and can attach a 320x240 and 240x320 version of it, I'll
make it for you...
Ryan

Have a look here.
http://forum.xda-developers.com/showpost.php?p=1355265&postcount=2
I use it with XDA Terra.

papamopps said:
Have a look here.
http://forum.xda-developers.com/showpost.php?p=1355265&postcount=2
I use it with XDA Terra.
Click to expand...
Click to collapse
Thanks for shooting me down..
j/k
I tried this style of dialpad before. I love the preview/SmartDial window, but I can't use it because of this. Besides, this design makes much better use of the keypad space, I think. It's much easier to dial and operate one-handed.
Just to clarify, this dialpad is based on the HTC Touch dialpad which is the same layout I presented, just with different graphics.
=
Which leads me back to tom_codon's comment... Are you referring to the the green 'talk' button? If so why do you need this? My device has a hardware key to start and end a call... therefore making the onscreen button wasted space. Are there some devices that don't have hard keys for this?
If your device has a hardware button for this function, why do you need an onscreen soft button?
Ryan

For some reason, on my herald p4350, it doesn't look right. When I installed, the background and graphics were either missing or distorted. Before I installed it, I had the (or a) generic dialpad (black buttons/white background with HTC emblem).

robosiris said:
For some reason, on my herald p4350, it doesn't look right. When I installed, the background and graphics were either missing or distorted. Before I installed it, I had the (or a) generic dialpad (black buttons/white background with HTC emblem).
Click to expand...
Click to collapse
Hmmm... Hopefully this doesn't work on Wings only. What OS do you have?
Did the keypad layout look the same as the default I displayed?
Did you copy all of the images in the zip to your Windows directory (overwriting what was already there)?
What images are missing?
Which are distorted?
Were you able to revert back to your default?
I've re-uploaded the image zip file with a couple changes. If you don't mind, please try it again and let me know!
Before anyone tries this, make sure you have a backup dialpad you can fall back on just in case.
Ryan

robosiris said:
For some reason, on my herald p4350, it doesn't look right. When I installed, the background and graphics were either missing or distorted. Before I installed it, I had the (or a) generic dialpad (black buttons/white background with HTC emblem).
Click to expand...
Click to collapse
I have exactly the same problem when trying to use any dialpad! Did you find a solution for this?

I have the same problem, I have HTC p4350, its all messed up, The "frames" of the dialerbuttons are visible, but I see only w/e is running in the background (If I have IE running, I see the contents of the browser instead of the dialer buttons) I can press the buttons, and when I do the numbers I press shows up....but cant have it that way...I removed the dialer without any problem using uninstall function..
wish anyone could get it to work

I haven't found a solution to this. It might be because our default dialpad is black and white. For some reason, my other device (ipaq 6828 - wm5) has the green dialpad as default. I have no problems installing and using other dialpad on that. I think as long I have this black and white dialpad as default on my htc, I will continue to have this problem of installing other dialpads. This might apply to many of us here as well.

robosiris said:
I haven't found a solution to this. It might be because our default dialpad is black and white. For some reason, my other device (ipaq 6828 - wm5) has the green dialpad as default. I have no problems installing and using other dialpad on that. I think as long I have this black and white dialpad as default on my htc, I will continue to have this problem of installing other dialpads. This might apply to many of us here as well.
Click to expand...
Click to collapse
Can you post a screenshot of your default dialpad, and the result with mine? You'll need a screen capture program like MagicSS to do it. Click on the 'Ficher CAB ARM' link to download a cab to your device, or use the Windows installer link just above it. Then map it to a button, go to the dialpad, and press the button. It will ask you where to save the bmp, then you can upload it here so I can try and figure out what's going on.
Also, if you just install the Touch dialpad without copying my images, does it work ok?
Ryan

I have tried both dialpads, the "original" and the skinned one, they do the same..Ill try to make the capture and upload it in few...
here is the dialpad with the new dialpad:
here is the one i use now (black something):
the one I use is a skinned one, but the result with the new dialpad is the same if I try install it on a new installed rom with original dialpad..

Thank you itje,
Ryan, itje's screen captures are exact depictions of my phone when I attempt to use new dialpad. For now, I'm using the default green HTC dialpad. Hopefully there will be a solution soon. Thanks again itje and Ryan for the screen capture app.
itje said:
I have tried both dialpads, the "original" and the skinned one, they do the same..Ill try to make the capture and upload it in few...
here is the dialpad with the new dialpad:
here is the one i use now (black something):
the one I use is a skinned one, but the result with the new dialpad is the same if I try install it on a new installed rom with original dialpad..
Click to expand...
Click to collapse

Sorry to venture a little off topic guys, but does anybody know of a tutorial for creating my own dialpad?

has anybody found a solution to this?

Seems as if alot of people are experiencing this problem. One thing I have noticed with alot of the new dialpad skins is that the file format is different compared to the stock WM skins. The old skins are in .bmp format I believe, and the new ones seem to be in .png . Taking a wile guess but maybe this has something to do with it.....

wm5 vs wm6

Hey guys, sorry I haven't gotten back to you; for some reason I didn't get any email notifications until today...?
Anyhow, I can say for sure that the problems you guys are experiencing are due to the transparency used in my dialpad.
As for why it's a problem for some and not others... Perhaps it's device specific, or more likely as MisterSosa said it's WM5 vs. WM6.
itje and robosiris, are you on WM5 or WM6?
BTW, I have another thread with newer versions here.
Ryan

neonstorm said:
itje and robosiris, are you on WM5 or WM6?
Ryan
Click to expand...
Click to collapse
same problem here, using WM6

Iphone Nargz Dialpad FIX ?

This dialpad is one of the best ever buth it have one bug thats so anoying.
You can switch in between call status and the keyboard fine but as soon as i hit a key on the keyboard any key even once ...! and then go back to call status it freezzes .. and i can't do anything no of the buttons work at all i have to do do a soft reset or take the battery out.
So is there any person that can fix this ? I think it's because the dialpad is developed for WM5 so thats maybe the problem. Hope that anyone will/can fix this dialpad, allot of people going to like that . Cheers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

150 Vieuws and no response....

I will donate.
NP9660 said:
This dialpad is one of the best ever buth it have one bug thats so anoying.
You can switch in between call status and the keyboard fine but as soon as i hit a key on the keyboard any key even once ...! and then go back to call status it freezzes .. and i can't do anything no of the buttons work at all i have to do do a soft reset or take the battery out.
So is there any person that can fix this ? I think it's because the dialpad is developed for WM5 so thats maybe the problem. Hope that anyone will/can fix this dialpad, allot of people going to like that . Cheers
Click to expand...
Click to collapse

NP9660 said:
This dialpad is one of the best ever buth it have one bug thats so anoying.
You can switch in between call status and the keyboard fine but as soon as i hit a key on the keyboard any key even once ...! and then go back to call status it freezzes .. and i can't do anything no of the buttons work at all i have to do do a soft reset or take the battery out.
So is there any person that can fix this ? I think it's because the dialpad is developed for WM5 so thats maybe the problem. Hope that anyone will/can fix this dialpad, allot of people going to like that . Cheers
Click to expand...
Click to collapse
where is the download link..i cant find it

where is the download link..i cant find it
Click to expand...
Click to collapse
Link: http://forum.xda-developers.com/showpost.php?p=1336681&postcount=41
===
It would be perfect, if it were mixed with this:
http://forum.xda-developers.com/showthread.php?t=321605 (iPhone version by Duronmarcel)
In Nargalzius dialer I like the graphics:
1. A "call" from the main screen
2. Buttons "Call" and "End" in the conversation's screen
3. Buttons in the conversation and without screen's image in the background (if it is not transparent, still better).
Could someone do the same? The project was abandoned by the author, then there is no more updates and the smartdial do not work.
Duronmarcel's dialer is much better because it has smartdial and 3G, and if someone could only replace these graphs that I said (or all of them), it would be perfect (at least for me).
In short, I would like to graphics version of Narg in the release of Duronmarcel.
Thanks a lot, best regards and sorry my bad english.

this dialpad skin was made by nargalzius. here it is, one of my favorite LOOKING skins, but there's tons of bugs. just try out landscape mode and see for yourself.

I like that too
I will donate too to get this dialpad working. I have p3300 unit

Same here, i will also donate to make it bug free

Why don't you ask Duronmarcel, he's a very friendly guy.
Regards,
Leo
M.A.S. said:
It would be perfect, if it were mixed with this:
http://forum.xda-developers.com/showthread.php?t=321605 (iPhone version by Duronmarcel)
In Nargalzius dialer I like the graphics:
1. A "call" from the main screen
2. Buttons "Call" and "End" in the conversation's screen
3. Buttons in the conversation and without screen's image in the background (if it is not transparent, still better).
Could someone do the same? The project was abandoned by the author, then there is no more updates and the smartdial do not work.
Duronmarcel's dialer is much better because it has smartdial and 3G, and if someone could only replace these graphs that I said (or all of them), it would be perfect (at least for me).
In short, I would like to graphics version of Narg in the release of Duronmarcel.
Thanks a lot, best regards and sorry my bad english.
Click to expand...
Click to collapse

Laurentius26 said:
Why don't you ask Duronmarcel, he's a very friendly guy.
Regards,
Leo
Click to expand...
Click to collapse
He's a great person.
I already did this...But I think he is busy.

It will be great if DuronMarcel will do this for us

NP9660 said:
It will be great if DuronMarcel will do this for us
Click to expand...
Click to collapse

and it randomly goes to the calendar during calls, someone please update this for us

Just have got pm back from Duronmarcel. He say soon when he have time he will take a look at it, let's hope it can be fixed

Fantastic =) Good to hear that we now have someone that's going to be actively working on getting us a good iphone-style dialpad.

nice, cant wait!

here is the one i am using..it works fine

ather90 said:
here is the one i am using..it works fine
Click to expand...
Click to collapse
But the SmartDial will be gone after installed the iphone pad

ather90 said:
here is the one i am using..it works fine
Click to expand...
Click to collapse
Looks also good buth the other one is allot bether i think. Have this one video dial ? because my touch dont have 3G video dialing.

can someone add a video calling button to that? it would be great

[APP] Smabergs actionscreen - new feature to powerbutton on top of phone

Action screen assigned to hold powerbutton for 3 seconds. (MUST BE INSTALLED ON PHONE MEMORY)
Powerbutton 12 icons actionscreen assigned to hold powerbutton for 3 seconds. This is the full program with softreset and power off option, will install on newer windows mobile 6.1/6.5 this is the updated version that will show you a green icon when pressed.
This is a very useful application, i use it almost all the time.
Thanx vijay555, and thanx AMMAR for the graphics. and dont remember the name for the basic application that i made my work from...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No top or bottom bar is showing this is fullscreen application.
ADDED ACTIONSCREEN FOR X1/XPERIA
ADDED ACTIONSCREEN FOR TP2/RHODIUM
ADDED ACTIONSCREEN FOR HD2/LEO BETA
ADDED ACTIONSCREEN FOR HD2/LEO Ver. 1.2 with data disconnect
ADDED extra file for download, this file will let you choose how to start bluetooth visible/hidden but only first time you run it, after that it will start with the choice you made (don't know if this file supports how many phones, but it works on X1) View attachment 153943 thanx khaan for the Xperia Bluetooth Switcher exe PS. NOT FOR HD2/TOUCH PRO 2, the HD2/touch pro2 actionscreen has another bluetooth switcher.

Sounds great. Hopefully looks great too. Any screenshots please!

Great stuff!
I was really missing the Action screen from TyTN II.
The only problem I noticed was the camera app will not start in this menu.
Also BT is started as "visible" - good if you want to receive something quickly from an unpaired phone, but not good if you want to start it for longer time such as using BT HF and be visible for all.

Pretty good. I like it, but i can't find any options....I can't find the folder it was installed to either lol.

Is there eny way to use another button for this?
Tks

ok some answers here.
its installed in windows dir because some files require that.
you can change the application launched in regestry, will post reg file later, as im typing on my x1 at the moment.
i will look into bluetooth, if there is some commandline i can use with the bt app, otherwise you can point the regfile to start the application caalled btswitcher.cab (search for it) in that you can choose not visable.
you can make a shortcut to action screen,place it in program, and use ae button plus to allocate another button to it.
regarding the camera its made for my swe rom, so you must change it in the reg file.
you will find all the button in regestry here
\\\registry\HKLM\Software\HTC\Biotouch\ActionScreen\

The app works flawlessly thank you. I got 2 questions:
1 - Can i change the time-out time. Can it stay longer after i press the button.
2 - Can i change the buttons. Assigning programs to them, for example?

Editted the camera path to CameraRunner.exe to work on my x1a.

This is a very cool app which i think i will use for long.
Thanks smaberg!

euphoria_x1 said:
This is a very cool app which i think i will use for long.
Thanks smaberg!
Click to expand...
Click to collapse
+1
smaberg is the star very cool application.thanks a lot.

orelsi said:
The app works flawlessly thank you. I got 2 questions:
1 - Can i change the time-out time. Can it stay longer after i press the button.
2 - Can i change the buttons. Assigning programs to them, for example?
Click to expand...
Click to collapse
sorry, time out can not be changed. The button graphics you can edit if you know how, the program launched when you press a button can easy be changed in regestry as descibed above.

Installed to my storage card at first but didn't work. Then tried again, but this time installing to device and it was ok. So it's gotta be installed to device?

WOW ..just.. wow dude....seriously. The more i use it the more i'm impressed. I can't believe i used my Xperia for so long without it . It ahs a problem with landscape mode though...can this be fixed, or is it something in my phone?

Draqula said:
Great stuff!
I was really missing the Action screen from TyTN II.
The only problem I noticed was the camera app will not start in this menu.
Also BT is started as "visible" - good if you want to receive something quickly from an unpaired phone, but not good if you want to start it for longer time such as using BT HF and be visible for all.
Click to expand...
Click to collapse
This cab, will let you choose first time you run it, after that it only starts up bluetooth, with the choice you made the first time.
And by the way no landscape support!

how about making this a penal?
great job though.
hey random idea, how cool will it be if you could bring up the "action screen penal" and some how activate an animation to spin the coloms around and have the ability to add contacts or apps? like the toshiba TG01 only simple.

I am starting the official "smaberg we want landscape support" campaign.

hypoh said:
Editted the camera path to CameraRunner.exe to work on my x1a.
Click to expand...
Click to collapse
that didn't work on mine - can i confirm that it's "\windows\CameraRunner.exe" ?
cheers !

Lookin' good smaberg, gonna try this one

smaberg said:
Action screen assigned to hold powerbutton for 3 seconds. (MUST BE INSTALLED ON PHONE MEMORY)
Smaberg X1 Powerbutton 12 icons actionscreen v 1.0 - Action screen assigned to hold powerbutton for 3 seconds. This is the full program with softreset and power off option, will install on newer windows mobile 6.1. this is the updated version that will show you a green icon when pressed.
This is a very useful application, i use it almost all the time.
Thanx AMMAR for the graphics. and dont remember name for the basic application that i made my work from...
(intended to get the feeling of ordinary SonyEricsson phone)
View attachment 153775
No top or bottom bar is showing this is fullscreen application.
ADDED extra file for download, this file will let you choose how to start bluetooth visible/hidden but only first time you run it, after that it will start with the choice you made (don't know if this file supports how many phones, but it works on X1) View attachment 153943
Click to expand...
Click to collapse
looks great my friend, nice work.
I might implement this in my roms, if that is ok with you
cheers

itje said:
looks great my friend, nice work.
I might implement this in my roms, if that is ok with you
cheers
Click to expand...
Click to collapse
no problem, as you helped me out so many times.

[app] 13 08 09 - powerbutton actionscreen 12 icons

-now for rhodium...
Action screen assigned to hold powerbutton for 3 seconds. (MUST BE INSTALLED ON PHONE MEMORY)
Smaberg TP2 Powerbutton 12 icons actionscreen v 1.1 - Action screen assigned to hold powerbutton for 3 seconds. This is the full program with softreset and power off option, will install on newer windows mobile 6.1(maybe 6.5).
This is a very useful application, i use it almost all the time.
Thanx vijay555, and thanx AMMAR for the graphics. and dont remember the name for the basic application that i made my work from...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Yeah, thank you very much.
I really missed a working actionscreen on the TP2.
Due to the new Bluetooth driver the one for the Xperia wasn't working anymore.
You made me as happy as with your ROMs back then

sorry, but can you tell me what is it and what does it do?
(sorry for my english)

Have a look at the screenshot. It's an action screen that allows you to select certain actions like new SMS, appointment, task etc.
Works nice! Good to see my BT is working with this version.
Gonna make some changes myself:
- Left softkey to ActionScreen
- No conformation for soft reset
Attached the left softkey for who's interested.

Works fine!
Especially the one-click Wifi switch is very clever.
The only thing is the problem of hitting the powerbutton while typing in landscape mode.
It will launch this app while you're chatting, very annoying.

sandoro said:
Works fine!
Especially the one-click Wifi switch is very clever.
The only thing is the problem of hitting the powerbutton while typing in landscape mode.
It will launch this app while you're chatting, very annoying.
Click to expand...
Click to collapse
No it won't, unless you hold the power button in for 3 seconds.

great app! thanks!!

mccune said:
Have a look at the screenshot. It's an action screen that allows you to select certain actions like new SMS, appointment, task etc.
Works nice! Good to see my BT is working with this version.
Gonna make some changes myself:
- Left softkey to ActionScreen
- No conformation for soft reset
Attached the left softkey for who's interested.
Click to expand...
Click to collapse
Hello,
This tips is good if you do not use the TF3D ... otherwise it is replaced by the one from the TF3D ...
Do you know where to modify it in the TF3D ?
Thanks.

Personally I am trying to avoid pushing any buttons, I'd rather have an option on the screen like a shortcut in the Start Menu or something.
Would that be possible?

Hello,
In the start menu, it is a shortcut. Not so difficult. After installing the cab above, you will go to "\Windows" folder and you search for "HTCActionScreen.exe" then you make a copy and after you go to the "Start Menu" folder and "Progams" folder and you make a "Paste shortcut".
And this is done.

DavidMc0 said:
No it won't, unless you hold the power button in for 3 seconds.
Click to expand...
Click to collapse
I think that's the point, if he's anything like me, everytime I type in landscape mode, I accidentally end up holding the power button for 3 seconds with the side of my finger, I'm forever turning of the phone .
Nice app though, just going to put it on.

For those that don't want to confirm the Soft Reset action:
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\ActionScreen\APP_10]
"Param"="/s"
Attatched the REG file for those that want to import the file to the registry.
Don't forget to make a soft reset afterwards

This is awesome! I would love to have this app. Is there any way to make the icons a bit more colorful? Thanks so much!

hi! congratulations GREAT app.
is there anyway to change the icon (add + contacts) to one (close screen) without suspend the device. it is very useful to who wants to ear music from the speaker phone. cause when you turn of the device the music stops.
tnx in advance

Excellent! Thanks for thinking about us poor TP2 users!

Very interesting appl.
Does someone test it with touch pro stock rom ?(I have the italian one).
Thanks

Smaberg rocks
Welcome to TP2...I have been an avid follower of yours on Xperia forum...great to see you got a TP2.
Look forward to your inputs in making our TP2 way better than the great device it already is!!!

Hmm after installing i tried the application but it doet not work properly.
When i push the I/O button of my TP2 the screen becomes totally black... but when i touch a button (that i dont see) the rolloverbutton appears in green.
What can i do to make it work normally?

Tony S. said:
Hmm after installing i tried the application but it doet not work properly.
When i push the I/O button of my TP2 the screen becomes totally black... but when i touch a button (that i dont see) the rolloverbutton appears in green.
What can i do to make it work normally?
Click to expand...
Click to collapse
uninstall and install agian in phone memory, then restart the phone...

Hi smaberg,
i have alittle problem. Possible you can help me.
I have the last version of bmp2brn. I save my picture
in 16 bit bmp in mirror. So far so good.
But what i have is this. What goes wrong
EDIT:
i have found the solution here on xda after seraching deeeeeeep.
BrConvert is the right tool!