SX56 Unlocked but more problems - MDA, XDA, 1010 Software Upgrading

After using your help, my Wallaby is unlocked. I can call another phone and receive a call from another phone BUT cannot transmit or receive sound/voice.
Any ideas??????
Thanks,
beeleeva

Update on this issue
I have discovered that the phone works with a hands free device. The big question, the really big question is can I change settings so that the phone works without the hands free device?
Thanks,
beeleeva

Related

Orange works Vodafone doesn't! Unlocked with Manipulator

Hi everyone. Great programme thanks but can anyone tell me why my Vodafone contract SIM won't work? I get a signal fine, It detects the Vodafone network fine. But every call drops before connection with Unable to Place Call message. Also will not take incoming calls. My Orange Pay as You Go SIM now works fine... and it has definitely unlocked as only O2 worked before. But I need Vodafone SIM to work.
The Vodafone SIM still works in all other handsets. I have also checked with Vodafone and they say there is no reason why the SIM should not work in un unlocked XDA. There are no calls barred on the account.
Is it a setting I have wrong? Or something I did wrong in the unlocking process? Many thanks for anyone's help.
My XDA is Pocket PC 2002, 32mb RAM
Rom Version: 3.12.07 eng
Rom Date. O8.13.02
Radio Ver: 4.06
Protocol 32S54
David C [/b]
Hi mate,
I have used the unlocked 64 mb xda with vodaphone with no problems. My rom was 3.16 and radiostack 4.20 and it wasn't any problem. Now I have upgraded to the good old xda rom from Jeff's kitchen and new radio stack from O2. I suggest you do the same and it will problably work better.
Good luck.
Cheers
Vic
I would wait a day before trying anything else, the phone is obviously unlocked to both 900 and 1800 mhz networks. I have had experience with Vodafone and T Mobile and Virgin recently where no calls could be placed for many hours, next day everything was normal, some kind of network problem. Have you tried the sms using the Voda sim, also what message does a caller get when trying to call you if you have the Voda sim inserted.
One more thing, I think it says somewhere that if you upgrade the radio stack to 4.21 then the unlock no longer works, so it would be better to get this solved before you upgrade the stack.
Thanks for your suggestions guys. But the Voda SIM works fine in my other phones and I have just tried it again in the XDA and same thing happens. Unable To Place Call. So it's not the network.
When I try to dial in to the Voda SIM on XDA I just hear a long tone...dead. It is a very early XDA. Don't know if that makes a difference.
Any help gratefully received as running out of ideas. Is there a manufacturer that may be able to help? But then they probably know less than you. I doubt if O2 will want to!
Many thanks again
Dave
Oh and Cruisin-Thru
SMS does work both ways...just the voice calls that don't. Any clues?
Thanks v much
dave :?
Have you tried manually setting the network under settings/phone/network, try choosing that and see what happens.
I have yes.
It's detecting Vodafone network fine. Just no calls. It's almost as if there's a call bar on though Voda tell me there isn't and it works in all other handsets.
Thanks anyway
Dave
One other thing, is that a very old sim card? Have you tried another voda sim in the xda, I remember having strange problems with some phones with the earlier sim cards, dont know the difference between them though.
Hi there, thanks. It doesn't work on any Vodafone SIMS. But all other networks. Vodafone say they don't know anything about the XDA and it must be a hardware fault..
Could it be that it is not unlocked "properly"? Should I run manipulator again? Think may have to give up on this one.
Thanks Dave

Need advice: Can't receive calls until I make one myself

Hi
I've been following this forum for a while and you guys seem pretty competent. I believe you are my best shot at fixing my rather serious problem...
I have several simcards, and two of them are showing very weird behavior in my Qtek S100. I am running the latest official ROM for my specific Danish Magician, the MA_DANG_WWE_10600_115_10500_SHIP.exe, downloaded from this site.
When using one of these bad simcards, I can't receive calls until I have made one myself. All incoming call are sent directly to voice mail. Restart the phone and I have to make a call again! Seems to me like my Magician doesn't log fully on to the cellular network?
The rest of the simcards are working fine. The big problem is that one of the card making trouble is the one I am paying $50 on each month
I was under the impression that this problem could be related to some of my simcards being 16K only, so I had one of them replaced today, but still no go. Of course I could have received yet another 'old' card, but what are the odds?
I have done a number of soft/hard resets and ROM/radio up/downgrades, but it doesn't change a thing. Any thoughts? Thanks!

No Voice On 8525

I just recently got a t-mobile to go sim card. It works perfectly in all my other phones, and when i put it in my unlocked 8525, i could make and recieve calls, but no one could hear me whatsoever, i couldn't use any automated setups either those couldn't pick up anything either. are the specific settings for t-mobile that i need to use? The voice recording feature in notes works fine, but im not sure if it uses a seperate mic for phone. Speakerphone and the headset does not make a diference, also, I can hear myself on the phone.
I have the latest HTC Qtek rom and I have bootloader 1.09
Has anyone had this problem and can anyone help me?
I also tried it with a cingular sim card and there is still no voice
I hard reset the device and tried both sim cards and it still didn't work. is my 8525 broken? Also sometimes when I try and turn off the phone in the comm manager, it turns right back on and i get invalid sim and no service unusually often, and other times it. I think this might be a radio problem.
Does no one want to help me? or does no one know how to?
cjchriscj said:
Does no one want to help me? or does no one know how to?
Click to expand...
Click to collapse
I think we don't know how. Can you access another sim from another operator and try that. I'm inclined to think there is more than just a software tweak required here and that there is a more serious fault.
Mike
mikechannon said:
I think we don't know how. Can you access another sim from another operator and try that. I'm inclined to think there is more than just a software tweak required here and that there is a more serious fault.
Mike
Click to expand...
Click to collapse
Well, I tried both a t-mobile sim card, and a cingular sim card. neither worked. Also I'm pretty sure that this all started happening after I unlocked it using an unlocked code that I got from a remote imei unlocker, is there any way to reverse that? to make it locked to cingular again?

Phone Problem

Hi i have a Hermes phone i bought off ebay approximatley 3/4 weeks ago.I have put my sim card in from my contract phone and been using it. I upgraded it to the Schaps newest rom and it has worked brilliantly untill now. Recently i have been unable to accept or make calls/texts or recieve them. When i try to ring it just does that annoying beep thing from the phone speaker. When i try to call it it said Calls are not currently beeing connected to this phone. I have looked and the only thing that google says it could be is that the phone is barred. Is this true? What can i do next? Help please..
Thanks in advance

Omnia 7 Call Ended Error

I bought a used phone from internet website, its worked great and it was locked on T-mobile UK. I got it unlocked from fastgsm and used my tesco sim with the phone.
The phone worked great for couple of days and on the third day it worked upto 11am (that is when i made the last call on the phone) and after that i am getting 00:00 Ended every time i press call even to voice mail.
it does not call anyone no texts either and when someone calls me it says the phone is switched off.
Steps i have taken to fix the issue:
I have swapped different sim cards.
i reset my phone through settings and diagnosis code.
I have updated the firmware to the 7740
I have installed a new unbranded UK retail firmware. its still running this firmware.
I have checked if the imei is blocked or stolen or something on a few websites nothing came up.
I have searched XDA to see if someone else has this problem and there are quite a few people here with the same problem but no solution.
I need help i have no idea what to do next
everything else on the phone works great no problems wlan connection keeps it connected and all the other features are fine its just the phone calls and text msgs which i cannot send or receive.
i have tested my sim on other phone it seems to be fine.
Please help i am not sure what to do next.
thank you and regards
Call Samsung support.
I've got a very similar problem - I can access the internet with my SIM but I can't make a call or send a text.
Omnia 7 - originally on orange but unlocked.
Any help appreciated.
ok then xda cant help me with this problem lets see if samsung support can do something about it. i have called them and i am taking the phone to their service center.
wish me luck i will report back if there is any news for other people with similar problem.
I have the same problem. Ive done almost all the steps as you have. Im beginning to think that its a hardware related problem. Maybe the sim-reader.. Well, i bought another phone but I hope to fix it anyway. I'll be back to check your progress in the matter.. gl
I can also contribute that I did the unlock via fastgsm.. (without any errors) And that may be the cause. But 1 thing is different though, I could never make any calls at all. You said that u were making calls.. I had a very long email conversation with fastgsm that ended with him not responding to me at all. But that was some time ago and I deleted the emails.. Not that I think it would help. Now I use the phone as a surfing pad (wifi/data ok) its sad really... lol
That's a terrible problem, I feel for you guys.
Definitely get it contact with your provider or SAMSUNG to get a replacement.
I can't think of any settings which you could change other than the obvious ones.

Categories

Resources