Right, well I had been using my dual today and then all of a sudden my stylus broke. Not that that is a major problem though
Next i tried to text using the 16 key keyboard and everytime i press the jkl key it seems to act as if i have pressed that and then the ghi key at the same time. Also some other buttons are similar to that problem
Then.. it was just on while i was trying to figure out wats going on with the keyboard and the volume control kept going on and off wenever i put my finger on a button without pressing it :O freaky lol
I tried turning off and back on and when i turned it on it loaded the notes program. I checked the keyboard and it still wasnt functioning correctly!
Please Help! Urgent
Update : It seems to be working fine now . I just left it on for a while and when i checked now it seems to be fine.
Problems with reception
wrong place.
Related
Hi All,
I have a strange problem, tried to search the forum,
without success...
Sometimes the OK button doesn't response (both OK buttons...),
only clicking OK on the screen works.
another issue - sometimes when clicking the action button nothing happens, or even worse - it acts like a long press even when I press it really shortly...
Any one else had such problems?
Is it (as I guess) a hardware problem?
I have the same problem and I dont think its the hardware cause the button is not presented in "buttonmapping" in the controlpanel. This has worked before. Please respond if you solve the problem.
Mine does it on occasion. Pretty sure it's software and It seems to happen with the same apps each time. Make note of what apps you have running when it happens.
Just started doing it again but I realized that I have never had a prob with the OK or Start Menu buttons but rather the softkeys. In Today Agenda, the left key (edit) stopped working and then a few minutes later the right key (menu) stopped working. I closed all apps and the problem persisted with every appointment I opened. Soft reset fixed it.
I should also add that I am not using the latest version of Today Agenda because I have not figured out how to make it look like the version I am used to.
Might be related: a lot of games I have tried don't seem to support the softbuttons, phone buttons, or really much else besides the directional pad and center select button.
Hi XDA.
One day my "down directional button" stoped working correctly. When pressed nothing happens, however the up, left and right buttons work as do all the other buttons and functions on the wizard.
And sometimes the wizard thinks the down button is pressed so it starts scrolling down even though the button isn't pressed.
I have reflashed a few times and dissasembled the whole wizard with no visible errors.
Does anyone have any idea to what i can do to get it to work again? Please help me as it is now blocking incomming calls and does other crap.
Hi Mate
I have the same situation but on the right key. Upto now didn't find any solution. Driving me nuts. When I receive an sms late at night it ends up wasting all the battery . . . .
Hope someone comes up with a solution.
The lcd/digitalizer, mail/internet/led/speaker-board and yes/no/softkeys/d-pad/enter-board are all leaded together. so one can't just change one of the parts in the top sliding half of the phone. but there is a connector between the halfs, so if you have an other wizard that is broken you can combine the two.
but i only have one wizard =(
I experienced something strange with my Qtek 9100 today. when i turned on my phone, all the keys including the call and the 'hang up'-button where backlighted. the keys did not respond as they should, and pressing the d-pad center would either open the start menu or initialize the screen calibration. if i opened the Notes app and created a new note, the note was filled with single letters like the L, the H or the Y. none of the keys seemed to be working when i pressed them.
i've experienced this once before, and the only thing in common is that i had my phone in a thight pocket for several hours. last thime i solved the problem by hibernate the unit and pressing all the keys, and turn it on again. this time it wasn't that easy, but i managed to get it working again at last.
but why is this happending?
PS: i've tried soft reset and taking out the battery, and that didn't help.
Please help me and my phone
Hello all,
I have a problem with my HD2's touchscreen. I've had the phone for awhile now and never had any problems. I've been using android from Sd for awhie and recently switched to NAND android.
I go to bed with a working phone and when I wake up, the touchscreen doesn't work. After trying to use it all day, it occasionly works. When I receive a call or text, the screen works just fine. I am abe to use it until the screen turns off then no more. This happens for each call or text. It also works just fine at first boot(until the screen is turned off.
Thinking that this was a software problem, I tried flashing different android builds, with the EXACT same results. I then wondered if it was a problem with MAGLDER, so I flashed back to a STOCK TMOUS rom, and stock SP, radio etc.
Even after going back to COMPLETELY stock, it now does the same thing in WINMO. Works just find at first boot until screen goes off, and works when I get calls and texts.
I'm now thinking that this is a hardware/digitizer problem, it just seems weird to me that it works 100% until the screen goes off and then not at all.
Anybody have any idea's or insights?
Thanks!
i've read a few similar threads (please search for them!) that indicate one possible cause...
your buttons strips at the bottom may be messing with the touch screen connections. i remember reading in one thread that the dude found a strong relationship between use of the on/off/endcall button and touchscreen failures.
you say it works...:
1. ...until the screen powers off
2. also works when you get an sms or call
in case (1), you have to press the endcall button to "wake" the device...so maybe the button puts just enough pressure to screw up the screen.
in case (2), the device wakes up automatically, so you never pressed the button that might cause the screen to screw up.
try to narrow it down like i've described. maybe your buttons are causing the problem. good luck!
Thanks for replying!
I did see the thread you were talking about though it did not seem to match my problems. However, today as I was working and pulling my phone out, It has started to look like that is the case. As of this afternoon, as long as I press any of the buttons other then the power/end call button to turn on the screen, the tuchscreen works just fine. When waking up the screen with the power/end call button, it does not work at all.
Yesterday and this morning, it didn't matter what button I pushed to wake up the screen, it was totally unresponsive.
So it looks like using the power/end cal button presses on my digitizer and causes problems.
And it's back to not working at all when I use any of the buttons, lol. Guess it's time to start looking into a new digitizer.
so I just noticed the lights for my hardware buttons are stuck on, happens from the moment the phone turns on, and nothing changes it (though they seem to dim slightly) I've tried reflashing the phone (using mdj cyanogen 2.7, nand with magldr 1.12)
I tried searching and havent seen anything like this. Only thing I can think is maybe it got a little wet(?) while I was recording video during a snow storm here, but nothing else seemed wrong, just got home and noticed it. Any ideas?
I have the exact same problem. I've flashed back to the original windows mobile rom and the problem is still there! I've searched and yet to find the solution. Anyone got any ideas?
Check to see if you have a voicemail - you may have read it but closed VM before listening to all the message, it can on occasions do this - it I'm right just ring your phone leave a fresh VM then go into VM and listen to the whole message
Thanks for the reply, but no dice on this one. I tried the voicemail thing and I have no voicemails.
To clarify it's the bottom 5 buttons (call, home, windows, back and power) that are constantly lit up. Even when the phone goes on standby those buttons stay lit. I'm looking to see if there's an app that can just shut them off.
I got the same problem. My hd2 got some water on it and the problem started. The hardware keys now getting dim but not getting completely off. There is no other problem
Please help.
same problem on my father htc click
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
johnerz said:
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
Click to expand...
Click to collapse
Thanks, I will try the rom.
But do u really think its a rom problem ? The keys light were working fine before the water hazard in the same existing rom. Besides the problem is also there when u are in the boot menu of MAGLDR or Clockwork menu.
any updates from anyone? On miy HD2 the vol up, start, back & end call key don't respond to any presses but seem to be active. Calls will randomly end, vol up acts as if the button is kept pressed!
Help!
Hi guys,
A little bump in this thread, but is there already found a solution for this problem?
After a hard reset and replacing the digitizer of my htc HD2, the buttonlights remain on. Even when the phone gets in standby mode.
I'm using cyanogenmod 7. (bought it like this. Didn't put android on it myself)
After the hard reset and digitizer replacement there also came another problem.
When pushing the windows logo (key 158) the volume up button also reacts (key 115). Thesame problem occurs when pushing the dial button. With that key (231), key 114 (volume down) reacts.
So when i want to open a menu or make a call the volume goes up or down.
Do you guys think I screwed something up when replacing my digitizer or is it just an software issue caused by the hard reset?
All right guys, it was an hardware failure.
I reopened my htc and checked all the connectors and (re)placed some of the yellow tape. After the reassembly, my phone just works as it should. All problems are solved.
My HTC HD2 also got the keys stuck after only a week of use. T-Mobile is sending me a replacement phone today.
Is this a common problem? I'm afraid it may happen again.
Hey guys I'm having same issue. Going to try opening up and check connectors.